// Retrode 2
[vid=0x0403,pid=0x97c1]

//At first we set the dpad mode. This controller uses 2 bytes. One byte is for up(0x00)/down(0xFF) and the other for left(0x00)/right(0xFF).
DPAD_MODE =                     DPAD_Absolute_2Values

//                              byte-position / value

//Set dpad values. The values you need to set depend on the dpad mode.
VPAD_BUTTON_DPAD_ABS_UP =       0x02,0x9C
VPAD_BUTTON_DPAD_ABS_DOWN =     0x02,0x64
VPAD_BUTTON_DPAD_ABS_LEFT =     0x01,0x9C
VPAD_BUTTON_DPAD_ABS_RIGHT =    0x01,0x64

//Set normal buttons
VPAD_BUTTON_A =                 0x03,0x10
VPAD_BUTTON_B =                 0x03,0x01
VPAD_BUTTON_X =                 0x03,0x20
VPAD_BUTTON_Y =                 0x03,0x02
VPAD_BUTTON_MINUS =             0x03,0x04
VPAD_BUTTON_PLUS =              0x03,0x08

//We only have 1 trigger on each side, lets always trigger both.
VPAD_BUTTON_R =                 0x03,0x80
VPAD_BUTTON_ZR =                0x03,0x80
VPAD_BUTTON_L =                 0x03,0x40
VPAD_BUTTON_ZL =                0x03,0x40

PAD_COUNT=4
PAD1_FILTER=0x00,0x01
PAD2_FILTER=0x00,0x02
PAD3_FILTER=0x00,0x03
PAD4_FILTER=0x00,0x04