/*
 *  Copyright (C) 2002-2019  The DOSBox Team
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License along
 *  with this program; if not, write to the Free Software Foundation, Inc.,
 *  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
 */


#include <iomanip>
#include <sstream>
#include <string.h>
#include <math.h> 
#include "dosbox.h"
#include "inout.h"
#include "mixer.h"
#include "dma.h"
#include "pic.h"
#include "hardware.h"
#include "setup.h"
#include "support.h"
#include "shell.h"
using namespace std;

void MIDI_RawOutByte(Bit8u data);
bool MIDI_Available(void);

#define SB_PIC_EVENTS 0

#define DSP_MAJOR 3
#define DSP_MINOR 1

#define MIXER_INDEX 0x04
#define MIXER_DATA 0x05

#define DSP_RESET 0x06
#define DSP_READ_DATA 0x0A
#define DSP_WRITE_DATA 0x0C
#define DSP_WRITE_STATUS 0x0C
#define DSP_READ_STATUS 0x0E
#define DSP_ACK_16BIT 0x0f

#define DSP_NO_COMMAND 0

#define DMA_BUFSIZE 1024
#define DSP_BUFSIZE 64
#define DSP_DACSIZE 512

//Should be enough for sound generated in millisecond blocks
#define SB_BUF_SIZE 8096
#define SB_SH	14
#define SB_SH_MASK	((1 << SB_SH)-1)

enum {DSP_S_RESET,DSP_S_RESET_WAIT,DSP_S_NORMAL,DSP_S_HIGHSPEED};
enum SB_TYPES {SBT_NONE=0,SBT_1=1,SBT_PRO1=2,SBT_2=3,SBT_PRO2=4,SBT_16=6,SBT_GB=7};
enum SB_IRQS {SB_IRQ_8,SB_IRQ_16,SB_IRQ_MPU};

enum DSP_MODES {
	MODE_NONE,
	MODE_DAC,
	MODE_DMA,
	MODE_DMA_PAUSE,
	MODE_DMA_MASKED

};
 
enum DMA_MODES {
	DSP_DMA_NONE,
	DSP_DMA_2,DSP_DMA_3,DSP_DMA_4,DSP_DMA_8,
	DSP_DMA_16,DSP_DMA_16_ALIASED
};

enum {
	PLAY_MONO,PLAY_STEREO
};

struct SB_INFO {
	Bitu freq;
	struct {
		bool stereo,sign,autoinit;
		DMA_MODES mode;
		Bitu rate,mul;
		Bit32u singlesize;		//size for single cycle transfers
		Bit32u autosize;		//size for auto init transfers
		Bitu left;				//Left in active cycle
		Bitu min;			
		Bit64u start;
		union {
			Bit8u  b8[DMA_BUFSIZE];
			Bit16s b16[DMA_BUFSIZE];
		} buf;
		Bitu bits;
		DmaChannel * chan;
		Bitu remain_size;
	} dma;
	bool speaker;
	bool midi;
	Bit8u time_constant;
	DSP_MODES mode;
	SB_TYPES type;
	struct {
		bool pending_8bit;
		bool pending_16bit;
	} irq;
	struct {
		Bit8u state;
		Bit8u cmd;
		Bit8u cmd_len;
		Bit8u cmd_in_pos;
		Bit8u cmd_in[DSP_BUFSIZE];
		struct {
			Bit8u lastval;
			Bit8u data[DSP_BUFSIZE];
			Bitu pos,used;
		} in,out;
		Bit8u test_register;
		Bitu write_busy;
	} dsp;
	struct {
		Bit16s data[DSP_DACSIZE+1];
		Bitu used;
		Bit16s last;
	} dac;
	struct {
		Bit8u index;
		Bit8u dac[2],fm[2],cda[2],master[2],lin[2];
		Bit8u mic;
		bool stereo;
		bool enabled;
		bool filtered;
		Bit8u unhandled[0x48];
	} mixer;
	struct {
		Bit8u reference;
		Bits stepsize;
		bool haveref;
	} adpcm;
	struct {
		Bitu base;
		Bitu irq;
		Bit8u dma8,dma16;
	} hw;
	struct {
		Bits value;
		Bitu count;
	} e2;
	MixerChannel * chan;
};



static SB_INFO sb;

static char const * const copyright_string="COPYRIGHT (C) CREATIVE TECHNOLOGY LTD, 1992.";

// number of bytes in input for commands (sb/sbpro)
static Bit8u DSP_cmd_len_sb[256] = {
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x00
//  1,0,0,0, 2,0,2,2, 0,0,0,0, 0,0,0,0,  // 0x10
  1,0,0,0, 2,2,2,2, 0,0,0,0, 0,0,0,0,  // 0x10 Wari hack
  0,0,0,0, 2,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x20
  0,0,0,0, 0,0,0,0, 1,0,0,0, 0,0,0,0,  // 0x30

  1,2,2,0, 0,0,0,0, 2,0,0,0, 0,0,0,0,  // 0x40
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x50
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x60
  0,0,0,0, 2,2,2,2, 0,0,0,0, 0,0,0,0,  // 0x70

  2,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x80
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x90
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xa0
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xb0

  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xc0
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xd0
  1,0,1,0, 1,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xe0
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0   // 0xf0
};

// number of bytes in input for commands (sb16)
static Bit8u DSP_cmd_len_sb16[256] = {
  0,0,0,0, 1,2,0,0, 1,0,0,0, 0,0,2,1,  // 0x00
//  1,0,0,0, 2,0,2,2, 0,0,0,0, 0,0,0,0,  // 0x10
  1,0,0,0, 2,2,2,2, 0,0,0,0, 0,0,0,0,  // 0x10 Wari hack
  0,0,0,0, 2,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x20
  0,0,0,0, 0,0,0,0, 1,0,0,0, 0,0,0,0,  // 0x30

  1,2,2,0, 0,0,0,0, 2,0,0,0, 0,0,0,0,  // 0x40
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x50
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x60
  0,0,0,0, 2,2,2,2, 0,0,0,0, 0,0,0,0,  // 0x70

  2,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x80
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0x90
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xa0
  3,3,3,3, 3,3,3,3, 3,3,3,3, 3,3,3,3,  // 0xb0

  3,3,3,3, 3,3,3,3, 3,3,3,3, 3,3,3,3,  // 0xc0
  0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xd0
  1,0,1,0, 1,0,0,0, 0,0,0,0, 0,0,0,0,  // 0xe0
  0,0,0,0, 0,0,0,0, 0,1,0,0, 0,0,0,0   // 0xf0
};

static Bit8u ASP_regs[256];
static bool ASP_init_in_progress = false;

static int E2_incr_table[4][9] = {
  {  0x01, -0x02, -0x04,  0x08, -0x10,  0x20,  0x40, -0x80, -106 },
  { -0x01,  0x02, -0x04,  0x08,  0x10, -0x20,  0x40, -0x80,  165 },
  { -0x01,  0x02,  0x04, -0x08,  0x10, -0x20, -0x40,  0x80, -151 },
  {  0x01, -0x02,  0x04, -0x08, -0x10,  0x20, -0x40,  0x80,   90 }
};

#ifndef max
#define max(a,b) ((a)>(b)?(a):(b))
#endif
#ifndef min
#define min(a,b) ((a)<(b)?(a):(b))
#endif

static void DSP_ChangeMode(DSP_MODES mode);
static void CheckDMAEnd();
static void END_DMA_Event(Bitu);
static void DMA_Silent_Event(Bitu val);
static void GenerateDMASound(Bitu size);

static void DSP_SetSpeaker(bool how) {
	if (sb.speaker==how) return;
	sb.speaker=how;
	if (sb.type==SBT_16) return;
	sb.chan->Enable(how);
	if (sb.speaker) {
		PIC_RemoveEvents(DMA_Silent_Event);
		CheckDMAEnd();
	} else {
		
	}
}

static INLINE void SB_RaiseIRQ(SB_IRQS type) {
	LOG(LOG_SB,LOG_NORMAL)("Raising IRQ");
	switch (type) {
	case SB_IRQ_8:
		if (sb.irq.pending_8bit) {
//			LOG_MSG("SB: 8bit irq pending");
			return;
		}
		sb.irq.pending_8bit=true;
		PIC_ActivateIRQ(sb.hw.irq);
		break;
	case SB_IRQ_16:
		if (sb.irq.pending_16bit) {
//			LOG_MSG("SB: 16bit irq pending");
			return;
		}
		sb.irq.pending_16bit=true;
		PIC_ActivateIRQ(sb.hw.irq);
		break;
	default:
		break;
	}
}

static INLINE void DSP_FlushData(void) {
	sb.dsp.out.used=0;
	sb.dsp.out.pos=0;
}

static double last_dma_callback = 0.0f;

static void DSP_DMA_CallBack(DmaChannel * chan, DMAEvent event) {
	if (chan!=sb.dma.chan || event==DMA_REACHED_TC) return;
	else if (event==DMA_MASKED) {
		if (sb.mode==MODE_DMA) {
			//Catch up to current time, but don't generate an IRQ!
			//Fixes problems with later sci games.
			double t = PIC_FullIndex() - last_dma_callback;
			Bitu s = static_cast<Bitu>(sb.dma.rate * t / 1000.0f);
			if (s > sb.dma.min) {
				LOG(LOG_SB,LOG_NORMAL)("limiting amount masked to sb.dma.min");
				s = sb.dma.min;
			}
			Bitu min_size = sb.dma.mul >> SB_SH;
			if (!min_size) min_size = 1;
			min_size *= 2;
			if (sb.dma.left > min_size) {
				if (s > (sb.dma.left-min_size)) s = sb.dma.left - min_size;
				if (s) GenerateDMASound(s);
			}
			sb.mode = MODE_DMA_MASKED;
//			DSP_ChangeMode(MODE_DMA_MASKED);
			LOG(LOG_SB,LOG_NORMAL)("DMA masked,stopping output, left %d",chan->currcnt);
		}
	} else if (event==DMA_UNMASKED) {
		if (sb.mode==MODE_DMA_MASKED && sb.dma.mode!=DSP_DMA_NONE) {
			DSP_ChangeMode(MODE_DMA);
//			sb.mode=MODE_DMA;
			CheckDMAEnd();
			LOG(LOG_SB,LOG_NORMAL)("DMA unmasked,starting output, auto %d block %d",chan->autoinit,chan->basecnt);
		}
	}
	else {
		E_Exit("Unknown sblaster dma event");
	}
}

#define MIN_ADAPTIVE_STEP_SIZE 0
#define MAX_ADAPTIVE_STEP_SIZE 32767
#define DC_OFFSET_FADE 254

static INLINE Bit8u decode_ADPCM_4_sample(Bit8u sample,Bit8u & reference,Bits& scale) {
	static const Bit8s scaleMap[64] = {
		0,  1,  2,  3,  4,  5,  6,  7,  0,  -1,  -2,  -3,  -4,  -5,  -6,  -7,
		1,  3,  5,  7,  9, 11, 13, 15, -1,  -3,  -5,  -7,  -9, -11, -13, -15,
		2,  6, 10, 14, 18, 22, 26, 30, -2,  -6, -10, -14, -18, -22, -26, -30,
		4, 12, 20, 28, 36, 44, 52, 60, -4, -12, -20, -28, -36, -44, -52, -60
	};
	static const Bit8u adjustMap[64] = {
		  0, 0, 0, 0, 0, 16, 16, 16,
		  0, 0, 0, 0, 0, 16, 16, 16,
		240, 0, 0, 0, 0, 16, 16, 16,
		240, 0, 0, 0, 0, 16, 16, 16,
		240, 0, 0, 0, 0, 16, 16, 16,
		240, 0, 0, 0, 0, 16, 16, 16,
		240, 0, 0, 0, 0,  0,  0,  0,
		240, 0, 0, 0, 0,  0,  0,  0
	};

	Bits samp = sample + scale;

	if ((samp < 0) || (samp > 63)) { 
		LOG(LOG_SB,LOG_ERROR)("Bad ADPCM-4 sample");
		if(samp < 0 ) samp =  0;
		if(samp > 63) samp = 63;
	}

	Bits ref = reference + scaleMap[samp];
	if (ref > 0xff) reference = 0xff;
	else if (ref < 0x00) reference = 0x00;
	else reference = (Bit8u)(ref&0xff);
	scale = (scale + adjustMap[samp]) & 0xff;
	
	return reference;
}

static INLINE Bit8u decode_ADPCM_2_sample(Bit8u sample,Bit8u & reference,Bits& scale) {
	static const Bit8s scaleMap[24] = {
		0,  1,  0,  -1, 1,  3,  -1,  -3,
		2,  6, -2,  -6, 4, 12,  -4, -12,
		8, 24, -8, -24, 6, 48, -16, -48
	};
	static const Bit8u adjustMap[24] = {
		  0, 4,   0, 4,
		252, 4, 252, 4, 252, 4, 252, 4,
		252, 4, 252, 4, 252, 4, 252, 4,
		252, 0, 252, 0
	};

	Bits samp = sample + scale;
	if ((samp < 0) || (samp > 23)) {
		LOG(LOG_SB,LOG_ERROR)("Bad ADPCM-2 sample");
		if(samp < 0 ) samp =  0;
		if(samp > 23) samp = 23;
	}

	Bits ref = reference + scaleMap[samp];
	if (ref > 0xff) reference = 0xff;
	else if (ref < 0x00) reference = 0x00;
	else reference = (Bit8u)(ref&0xff);
	scale = (scale + adjustMap[samp]) & 0xff;

	return reference;
}

INLINE Bit8u decode_ADPCM_3_sample(Bit8u sample,Bit8u & reference,Bits& scale) {
	static const Bit8s scaleMap[40] = { 
		0,  1,  2,  3,  0,  -1,  -2,  -3,
		1,  3,  5,  7, -1,  -3,  -5,  -7,
		2,  6, 10, 14, -2,  -6, -10, -14,
		4, 12, 20, 28, -4, -12, -20, -28,
		5, 15, 25, 35, -5, -15, -25, -35
	};
	static const Bit8u adjustMap[40] = {
		  0, 0, 0, 8,   0, 0, 0, 8,
		248, 0, 0, 8, 248, 0, 0, 8,
		248, 0, 0, 8, 248, 0, 0, 8,
		248, 0, 0, 8, 248, 0, 0, 8,
		248, 0, 0, 0, 248, 0, 0, 0
	};

	Bits samp = sample + scale;
	if ((samp < 0) || (samp > 39)) {
		LOG(LOG_SB,LOG_ERROR)("Bad ADPCM-3 sample");
		if(samp < 0 ) samp =  0;
		if(samp > 39) samp = 39;
	}

	Bits ref = reference + scaleMap[samp];
	if (ref > 0xff) reference = 0xff;
	else if (ref < 0x00) reference = 0x00;
	else reference = (Bit8u)(ref&0xff);
	scale = (scale + adjustMap[samp]) & 0xff;

	return reference;
}

static void GenerateDMASound(Bitu size) {
	Bitu read=0;Bitu done=0;Bitu i=0;
	last_dma_callback = PIC_FullIndex();

	//Determine how much you should read
	if(sb.dma.autoinit) {
		if (sb.dma.left <= size) 
			size = sb.dma.left;
	} else {
		if (sb.dma.left <= sb.dma.min) 
			size = sb.dma.left;
	}

	//Read the actual data, process it and send it off to the mixer
	switch (sb.dma.mode) {
	case DSP_DMA_2:
		read=sb.dma.chan->Read(size,sb.dma.buf.b8);
		if (read && sb.adpcm.haveref) {
			sb.adpcm.haveref=false;
			sb.adpcm.reference=sb.dma.buf.b8[0];
			sb.adpcm.stepsize=MIN_ADAPTIVE_STEP_SIZE;
			i++;
		}
		for (;i<read;i++) {
			MixTemp[done++]=decode_ADPCM_2_sample((sb.dma.buf.b8[i] >> 6) & 0x3,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_2_sample((sb.dma.buf.b8[i] >> 4) & 0x3,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_2_sample((sb.dma.buf.b8[i] >> 2) & 0x3,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_2_sample((sb.dma.buf.b8[i] >> 0) & 0x3,sb.adpcm.reference,sb.adpcm.stepsize);
		}
		sb.chan->AddSamples_m8(done,MixTemp);
		break;
	case DSP_DMA_3:
		read=sb.dma.chan->Read(size,sb.dma.buf.b8);
		if (read && sb.adpcm.haveref) {
			sb.adpcm.haveref=false;
			sb.adpcm.reference=sb.dma.buf.b8[0];
			sb.adpcm.stepsize=MIN_ADAPTIVE_STEP_SIZE;
			i++;
		}
		for (;i<read;i++) {
			MixTemp[done++]=decode_ADPCM_3_sample((sb.dma.buf.b8[i] >> 5) & 0x7,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_3_sample((sb.dma.buf.b8[i] >> 2) & 0x7,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_3_sample((sb.dma.buf.b8[i] & 0x3) << 1,sb.adpcm.reference,sb.adpcm.stepsize);
		}
		sb.chan->AddSamples_m8(done,MixTemp);
		break;
	case DSP_DMA_4:
		read=sb.dma.chan->Read(size,sb.dma.buf.b8);
		if (read && sb.adpcm.haveref) {
			sb.adpcm.haveref=false;
			sb.adpcm.reference=sb.dma.buf.b8[0];
			sb.adpcm.stepsize=MIN_ADAPTIVE_STEP_SIZE;
			i++;
		}
		for (;i<read;i++) {
			MixTemp[done++]=decode_ADPCM_4_sample(sb.dma.buf.b8[i] >> 4,sb.adpcm.reference,sb.adpcm.stepsize);
			MixTemp[done++]=decode_ADPCM_4_sample(sb.dma.buf.b8[i]& 0xf,sb.adpcm.reference,sb.adpcm.stepsize);
		}
		sb.chan->AddSamples_m8(done,MixTemp);
		break;
	case DSP_DMA_8:
		if (sb.dma.stereo) {
			read=sb.dma.chan->Read(size,&sb.dma.buf.b8[sb.dma.remain_size]);
			Bitu total=read+sb.dma.remain_size;
            if (!sb.dma.sign)  sb.chan->AddSamples_s8(total>>1,sb.dma.buf.b8);
            else sb.chan->AddSamples_s8s(total>>1,(Bit8s*)sb.dma.buf.b8); 
			if (total&1) {
				sb.dma.remain_size=1;
				sb.dma.buf.b8[0]=sb.dma.buf.b8[total-1];
			} else sb.dma.remain_size=0;
		} else {
			read=sb.dma.chan->Read(size,sb.dma.buf.b8);
			if (!sb.dma.sign) sb.chan->AddSamples_m8(read,sb.dma.buf.b8);
			else sb.chan->AddSamples_m8s(read,(Bit8s *)sb.dma.buf.b8);
		}
		break;
	case DSP_DMA_16:
	case DSP_DMA_16_ALIASED:
		if (sb.dma.stereo) {
			/* In DSP_DMA_16_ALIASED mode temporarily divide by 2 to get number of 16-bit
			   samples, because 8-bit DMA Read returns byte size, while in DSP_DMA_16 mode
			   16-bit DMA Read returns word size */
			read=sb.dma.chan->Read(size,(Bit8u *)&sb.dma.buf.b16[sb.dma.remain_size]) 
				>> (sb.dma.mode==DSP_DMA_16_ALIASED ? 1:0);
			Bitu total=read+sb.dma.remain_size;
#if defined(WORDS_BIGENDIAN)
			if (sb.dma.sign) sb.chan->AddSamples_s16_nonnative(total>>1,sb.dma.buf.b16);
			else sb.chan->AddSamples_s16u_nonnative(total>>1,(Bit16u *)sb.dma.buf.b16);
#else
			if (sb.dma.sign) sb.chan->AddSamples_s16(total>>1,sb.dma.buf.b16);
			else sb.chan->AddSamples_s16u(total>>1,(Bit16u *)sb.dma.buf.b16);
#endif
			if (total&1) {
				sb.dma.remain_size=1;
				sb.dma.buf.b16[0]=sb.dma.buf.b16[total-1];
			} else sb.dma.remain_size=0;
		} else {
			read=sb.dma.chan->Read(size,(Bit8u *)sb.dma.buf.b16) 
				>> (sb.dma.mode==DSP_DMA_16_ALIASED ? 1:0);
#if defined(WORDS_BIGENDIAN)
			if (sb.dma.sign) sb.chan->AddSamples_m16_nonnative(read,sb.dma.buf.b16);
			else sb.chan->AddSamples_m16u_nonnative(read,(Bit16u *)sb.dma.buf.b16);
#else
			if (sb.dma.sign) sb.chan->AddSamples_m16(read,sb.dma.buf.b16);
			else sb.chan->AddSamples_m16u(read,(Bit16u *)sb.dma.buf.b16);
#endif
		}
		//restore buffer length value to byte size in aliased mode
		if (sb.dma.mode==DSP_DMA_16_ALIASED) read=read<<1;
		break;
	default:
		LOG_MSG("Unhandled dma mode %d",sb.dma.mode);
		sb.mode=MODE_NONE;
		return;
	}
	//Check how many bytes were actually read
	sb.dma.left-=read;
	if (!sb.dma.left) {
		PIC_RemoveEvents(END_DMA_Event);
		if (sb.dma.mode >= DSP_DMA_16) 
			SB_RaiseIRQ(SB_IRQ_16);
		else 
			SB_RaiseIRQ(SB_IRQ_8);

		if (!sb.dma.autoinit) {
			//Not new single cycle transfer waiting?
			if (!sb.dma.singlesize) {
				LOG(LOG_SB, LOG_NORMAL)("Single cycle transfer ended");
				sb.mode = MODE_NONE;
				sb.dma.mode = DSP_DMA_NONE;
			}
			else {
				//A single size transfer is still waiting, handle that now
				sb.dma.left = sb.dma.singlesize;
				sb.dma.singlesize = 0;
				LOG(LOG_SB, LOG_NORMAL)("Switch to Single cycle transfer begun");
			}
		} else {
			if (!sb.dma.autosize) {
				LOG(LOG_SB,LOG_NORMAL)("Auto-init transfer with 0 size");
				sb.mode=MODE_NONE;
			}
			//Continue with a new auto init transfer
			sb.dma.left = sb.dma.autosize;

		}
	}
}

/* old version...
static void GenerateDACSound(Bitu len) {
	if (!sb.dac.used) {
		sb.mode=MODE_NONE;
		return;
	}
	Bitu dac_add=(sb.dac.used<<16)/len;
	Bitu dac_pos=0;
	Bit16s * out=(Bit16s *)MixTemp;
	for (Bitu i=len;i;i--) {
		*out++=sb.dac.data[0+(dac_pos>>16)];
		dac_pos+=dac_add;
	}
	sb.dac.used=0;
	sb.chan->AddSamples_m16(len,(Bit16s *)MixTemp);
}
*/

static void DMA_Silent_Event(Bitu val) {
	if (sb.dma.left<val) val=sb.dma.left;
	Bitu read=sb.dma.chan->Read(val,sb.dma.buf.b8);
	sb.dma.left-=read;
	if (!sb.dma.left) {
		if (sb.dma.mode >= DSP_DMA_16) SB_RaiseIRQ(SB_IRQ_16);
		else SB_RaiseIRQ(SB_IRQ_8);
		//FIX, use the auto to single switch mechanics here as well or find a better way to silence
		if (sb.dma.autoinit) 
			sb.dma.left=sb.dma.autosize;
		else {
			sb.mode=MODE_NONE;
			sb.dma.mode=DSP_DMA_NONE;
		}
	}
	if (sb.dma.left) {
		Bitu bigger=(sb.dma.left > sb.dma.min) ? sb.dma.min : sb.dma.left;
		float delay=(bigger*1000.0f)/sb.dma.rate;
		PIC_AddEvent(DMA_Silent_Event,delay,bigger);
	}
}

static void END_DMA_Event(Bitu val) {
	GenerateDMASound(val);
}

static void CheckDMAEnd(void) {
	if (!sb.dma.left) return;
	if (!sb.speaker && sb.type!=SBT_16) {
		Bitu bigger=(sb.dma.left > sb.dma.min) ? sb.dma.min : sb.dma.left;
		float delay=(bigger*1000.0f)/sb.dma.rate;
		PIC_AddEvent(DMA_Silent_Event,delay,bigger);
		LOG(LOG_SB,LOG_NORMAL)("Silent DMA Transfer scheduling IRQ in %.3f milliseconds",delay);
	} else if (sb.dma.left<sb.dma.min) {
		float delay=(sb.dma.left*1000.0f)/sb.dma.rate;
		LOG(LOG_SB,LOG_NORMAL)("Short transfer scheduling IRQ in %.3f milliseconds",delay);	
		PIC_AddEvent(END_DMA_Event,delay,sb.dma.left);
	}
}

static void DSP_ChangeMode(DSP_MODES mode) {
	if (sb.mode==mode) return;
	else sb.chan->FillUp();
	sb.mode=mode;
}

static void DSP_RaiseIRQEvent(Bitu /*val*/) {
	SB_RaiseIRQ(SB_IRQ_8);
}

static void DSP_DoDMATransfer(DMA_MODES mode,Bitu freq,bool autoinit, bool stereo) {
	char const * type;
	//Fill up before changing state?
	sb.chan->FillUp();

	//Starting a new transfer will clear any active irqs?
	sb.irq.pending_8bit = false;
	sb.irq.pending_16bit = false;
	PIC_DeActivateIRQ(sb.hw.irq);

	switch (mode) {
	case DSP_DMA_2:
		type="2-bits ADPCM";
		sb.dma.mul=(1 << SB_SH)/4;
		break;
	case DSP_DMA_3:
		type="3-bits ADPCM";
		sb.dma.mul=(1 << SB_SH)/3;
		break;
	case DSP_DMA_4:
		type="4-bits ADPCM";
		sb.dma.mul=(1 << SB_SH)/2;
		break;
	case DSP_DMA_8:
		type="8-bits PCM";
		sb.dma.mul=(1 << SB_SH);
		break;
	case DSP_DMA_16_ALIASED:
		type="16-bits(aliased) PCM";
		sb.dma.mul=(1 << SB_SH)*2;
		break;
	case DSP_DMA_16:
		type="16-bits PCM";
		sb.dma.mul=(1 << SB_SH);
		break;
	default:
		LOG(LOG_SB,LOG_ERROR)("DSP:Illegal transfer mode %d",mode);
		return;
	}

	//Going from an active autoinit into a single cycle
	if (sb.mode >= MODE_DMA && sb.dma.autoinit && !autoinit) {
		//Don't do anything, the total will flip over on the next transfer
	}
	//Just a normal single cycle transfer
	else if (!autoinit) {
		sb.dma.left = sb.dma.singlesize;
		sb.dma.singlesize = 0;
	}
	//Going into an autoinit transfer
	else {
		//Transfer full cycle again
		sb.dma.left = sb.dma.autosize;
	}
	sb.dma.autoinit = autoinit;
	sb.dma.mode = mode;
	sb.dma.stereo = stereo;
	//Double the reading speed for stereo mode
	if (sb.dma.stereo) 
		sb.dma.mul*=2;
	sb.dma.rate=(sb.freq*sb.dma.mul) >> SB_SH;
	sb.dma.min=(sb.dma.rate*3)/1000;
	sb.chan->SetFreq(freq);

	PIC_RemoveEvents(END_DMA_Event);
	//Set to be masked, the dma call can change this again.
	sb.mode = MODE_DMA_MASKED;
	sb.dma.chan->Register_Callback(DSP_DMA_CallBack);

#if (C_DEBUG)
	LOG(LOG_SB, LOG_NORMAL)("DMA Transfer:%s %s %s freq %d rate %d size %d",
		type,
		stereo ? "Stereo" : "Mono",
		autoinit ? "Auto-Init" : "Single-Cycle",
		freq, sb.dma.rate, sb.dma.left
		);
#else
	type = *&type;
#endif
}

static void DSP_PrepareDMA_Old(DMA_MODES mode,bool autoinit,bool sign) {
	sb.dma.sign=sign;
	if (!autoinit) 
		sb.dma.singlesize=1+sb.dsp.in.data[0]+(sb.dsp.in.data[1] << 8);
	sb.dma.chan=GetDMAChannel(sb.hw.dma8);
	DSP_DoDMATransfer(mode,sb.freq / (sb.mixer.stereo ? 2 : 1), autoinit, sb.mixer.stereo);
}

static void DSP_PrepareDMA_New(DMA_MODES mode,Bitu length,bool autoinit,bool stereo) {
	Bitu freq=sb.freq;

	//equal length if data format and dma channel are both 16-bit or 8-bit
	if (mode==DSP_DMA_16) {
		if (sb.hw.dma16!=0xff) {
			sb.dma.chan=GetDMAChannel(sb.hw.dma16);
			if (sb.dma.chan==NULL) {
				sb.dma.chan=GetDMAChannel(sb.hw.dma8);
				mode=DSP_DMA_16_ALIASED;
				length *= 2;
			}
		} else {
			sb.dma.chan=GetDMAChannel(sb.hw.dma8);
			mode=DSP_DMA_16_ALIASED;
			//UNDOCUMENTED:
			//In aliased mode sample length is written to DSP as number of
			//16-bit samples so we need double 8-bit DMA buffer length
			length *= 2;
		}
	} else sb.dma.chan=GetDMAChannel(sb.hw.dma8);
	//Set the length to the correct register depending on mode
	if (autoinit) {
		sb.dma.autosize = length;
	}
	else {
		sb.dma.singlesize = length;
	}
	DSP_DoDMATransfer(mode,freq,autoinit,stereo);
}


static void DSP_AddData(Bit8u val) {
	if (sb.dsp.out.used<DSP_BUFSIZE) {
		Bitu start=sb.dsp.out.used+sb.dsp.out.pos;
		if (start>=DSP_BUFSIZE) start-=DSP_BUFSIZE;
		sb.dsp.out.data[start]=val;
		sb.dsp.out.used++;
	} else {
		LOG(LOG_SB,LOG_ERROR)("DSP:Data Output buffer full");
	}
}


static void DSP_FinishReset(Bitu /*val*/) {
	DSP_FlushData();
	DSP_AddData(0xaa);
	sb.dsp.state=DSP_S_NORMAL;
}

static void DSP_Reset(void) {
	LOG(LOG_SB,LOG_ERROR)("DSP:Reset");
	PIC_DeActivateIRQ(sb.hw.irq);

	DSP_ChangeMode(MODE_NONE);
	DSP_FlushData();
	sb.dsp.cmd=DSP_NO_COMMAND;
	sb.dsp.cmd_len=0;
	sb.dsp.in.pos=0;
	sb.dsp.write_busy=0;
	PIC_RemoveEvents(DSP_FinishReset);

	sb.dma.left=0;
	sb.dma.singlesize=0;
	sb.dma.autosize = 0;
	sb.dma.stereo=false;
	sb.dma.sign=false;
	sb.dma.autoinit=false;
	sb.dma.mode=DSP_DMA_NONE;
	sb.dma.remain_size=0;
	if (sb.dma.chan) sb.dma.chan->Clear_Request();

	sb.freq=22050;
	sb.time_constant=45;
	sb.dac.used=0;
	sb.dac.last=0;
	sb.e2.value=0xaa;
	sb.e2.count=0;
	sb.irq.pending_8bit=false;
	sb.irq.pending_16bit=false;
	sb.chan->SetFreq(22050);
//	DSP_SetSpeaker(false);
	PIC_RemoveEvents(END_DMA_Event);
}

static void DSP_DoReset(Bit8u val) {
	if (((val&1)!=0) && (sb.dsp.state!=DSP_S_RESET)) {
//TODO Get out of highspeed mode
		DSP_Reset();
		sb.dsp.state=DSP_S_RESET;
	} else if (((val&1)==0) && (sb.dsp.state==DSP_S_RESET)) {	// reset off
		sb.dsp.state=DSP_S_RESET_WAIT;
		PIC_RemoveEvents(DSP_FinishReset);
		PIC_AddEvent(DSP_FinishReset,20.0f/1000.0f,0);	// 20 microseconds
	}
}

static void DSP_E2_DMA_CallBack(DmaChannel * /*chan*/, DMAEvent event) {
	if (event==DMA_UNMASKED) {
		Bit8u val=(Bit8u)(sb.e2.value&0xff);
		DmaChannel * chan=GetDMAChannel(sb.hw.dma8);
		chan->Register_Callback(0);
		chan->Write(1,&val);
	}
}

static void DSP_ADC_CallBack(DmaChannel * /*chan*/, DMAEvent event) {
	if (event!=DMA_UNMASKED) return;
	Bit8u val=128;
	DmaChannel * ch=GetDMAChannel(sb.hw.dma8);
	while (sb.dma.left--) {
		ch->Write(1,&val);
	}
	SB_RaiseIRQ(SB_IRQ_8);
	ch->Register_Callback(0);
}

static void DSP_ChangeRate(Bitu freq) {
	if (sb.freq!=freq && sb.dma.mode!=DSP_DMA_NONE) {
		sb.chan->FillUp();
		sb.chan->SetFreq(freq / (sb.mixer.stereo ? 2 : 1));
		sb.dma.rate=(freq*sb.dma.mul) >> SB_SH;
		sb.dma.min=(sb.dma.rate*3)/1000;
	}
	sb.freq=freq;
}

Bitu DEBUG_EnableDebugger(void);

#define DSP_SB16_ONLY if (sb.type != SBT_16) { LOG(LOG_SB,LOG_ERROR)("DSP:Command %2X requires SB16",sb.dsp.cmd); break; }
#define DSP_SB2_ABOVE if (sb.type <= SBT_1) { LOG(LOG_SB,LOG_ERROR)("DSP:Command %2X requires SB2 or above",sb.dsp.cmd); break; } 

static void DSP_DoCommand(void) {
//	LOG_MSG("DSP Command %X",sb.dsp.cmd);
	switch (sb.dsp.cmd) {
	case 0x04:
		if (sb.type == SBT_16) {
			/* SB16 ASP set mode register */
			if ((sb.dsp.in.data[0]&0xf1)==0xf1) ASP_init_in_progress=true;
			else ASP_init_in_progress=false;
			LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X (set mode register to %X)",sb.dsp.cmd,sb.dsp.in.data[0]);
		} else {
			/* DSP Status SB 2.0/pro version. NOT SB16. */
			DSP_FlushData();
			if (sb.type == SBT_2) DSP_AddData(0x88);
			else if ((sb.type == SBT_PRO1) || (sb.type == SBT_PRO2)) DSP_AddData(0x7b);
			else DSP_AddData(0xff);			//Everything enabled
		}
		break;
	case 0x05:	/* SB16 ASP set codec parameter */
		LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X (set codec parameter)",sb.dsp.cmd);
		break;
	case 0x08:	/* SB16 ASP get version */
		LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X sub %X",sb.dsp.cmd,sb.dsp.in.data[0]);
		if (sb.type == SBT_16) {
			switch (sb.dsp.in.data[0]) {
				case 0x03:
					DSP_AddData(0x18);	// version ID (??)
					break;
				default:
					LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X sub %X",sb.dsp.cmd,sb.dsp.in.data[0]);
					break;
			}
		} else {
			LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X sub %X",sb.dsp.cmd,sb.dsp.in.data[0]);
		}
		break;
	case 0x0e:	/* SB16 ASP set register */
		if (sb.type == SBT_16) {
//			LOG(LOG_SB,LOG_NORMAL)("SB16 ASP set register %X := %X",sb.dsp.in.data[0],sb.dsp.in.data[1]);
			ASP_regs[sb.dsp.in.data[0]] = sb.dsp.in.data[1];
		} else {
			LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X (set register)",sb.dsp.cmd);
		}
		break;
	case 0x0f:	/* SB16 ASP get register */
		if (sb.type == SBT_16) {
			if ((ASP_init_in_progress) && (sb.dsp.in.data[0]==0x83)) {
				ASP_regs[0x83] = ~ASP_regs[0x83];
			}
//			LOG(LOG_SB,LOG_NORMAL)("SB16 ASP get register %X == %X",sb.dsp.in.data[0],ASP_regs[sb.dsp.in.data[0]]);
			DSP_AddData(ASP_regs[sb.dsp.in.data[0]]);
		} else {
			LOG(LOG_SB,LOG_NORMAL)("DSP Unhandled SB16ASP command %X (get register)",sb.dsp.cmd);
		}
		break;
	case 0x10:	/* Direct DAC */
		DSP_ChangeMode(MODE_DAC);
		if (sb.dac.used<DSP_DACSIZE) {
			sb.dac.data[sb.dac.used++]=(Bit8s(sb.dsp.in.data[0] ^ 0x80)) << 8;
			sb.dac.data[sb.dac.used++]=(Bit8s(sb.dsp.in.data[0] ^ 0x80)) << 8;
		}
		break;
	case 0x24:	/* Singe Cycle 8-Bit DMA ADC */
		//Directly write to left?
		sb.dma.left = 1 + sb.dsp.in.data[0] + (sb.dsp.in.data[1] << 8);
		sb.dma.sign=false;
		LOG(LOG_SB,LOG_ERROR)("DSP:Faked ADC for %d bytes",sb.dma.left);
		GetDMAChannel(sb.hw.dma8)->Register_Callback(DSP_ADC_CallBack);
		break;
	case 0x14:	/* Singe Cycle 8-Bit DMA DAC */
	case 0x15:	/* Wari hack. Waru uses this one instead of 0x14, but some weird stuff going on there anyway */
	case 0x91:	/* Singe Cycle 8-Bit DMA High speed DAC */
		/* Note: 0x91 is documented only for DSP ver.2.x and 3.x, not 4.x */
		DSP_PrepareDMA_Old(DSP_DMA_8,false,false);
		break;
	case 0x90:	/* Auto Init 8-bit DMA High Speed */
	case 0x1c:	/* Auto Init 8-bit DMA */
		DSP_SB2_ABOVE; /* Note: 0x90 is documented only for DSP ver.2.x and 3.x, not 4.x */
		DSP_PrepareDMA_Old(DSP_DMA_8,true,false);
		break;
	case 0x38:  /* Write to SB MIDI Output */
		if (sb.midi == true) MIDI_RawOutByte(sb.dsp.in.data[0]);
		break;
	case 0x40:	/* Set Timeconstant */
		DSP_ChangeRate(1000000 / (256 - sb.dsp.in.data[0]));
		break;
	case 0x41:	/* Set Output Samplerate */
	case 0x42:	/* Set Input Samplerate */
		/* Note: 0x42 is handled like 0x41, needed by Fasttracker II */
		DSP_SB16_ONLY;
		DSP_ChangeRate((sb.dsp.in.data[0] << 8) | sb.dsp.in.data[1]);
		break;
	case 0x48:	/* Set DMA Block Size */
		DSP_SB2_ABOVE;
		sb.dma.autosize=1+sb.dsp.in.data[0]+(sb.dsp.in.data[1] << 8);
		break;
	case 0x75:	/* 075h : Single Cycle 4-bit ADPCM Reference */
		sb.adpcm.haveref=true;
	case 0x74:	/* 074h : Single Cycle 4-bit ADPCM */	
		DSP_PrepareDMA_Old(DSP_DMA_4,false,false);
		break;
	case 0x77:	/* 077h : Single Cycle 3-bit(2.6bit) ADPCM Reference*/
		sb.adpcm.haveref=true;
	case 0x76:  /* 074h : Single Cycle 3-bit(2.6bit) ADPCM */
		DSP_PrepareDMA_Old(DSP_DMA_3,false,false);
		break;
	case 0x7d:	/* Auto Init 4-bit ADPCM Reference */
		DSP_SB2_ABOVE;
		sb.adpcm.haveref=true;
		DSP_PrepareDMA_Old(DSP_DMA_4,true,false);
		break;
	case 0x17:	/* 017h : Single Cycle 2-bit ADPCM Reference*/
		sb.adpcm.haveref=true;
	case 0x16:  /* 074h : Single Cycle 2-bit ADPCM */
		DSP_PrepareDMA_Old(DSP_DMA_2,false,false);
		break;
	case 0x80:	/* Silence DAC */
		PIC_AddEvent(&DSP_RaiseIRQEvent,
			(1000.0f*(1+sb.dsp.in.data[0]+(sb.dsp.in.data[1] << 8))/sb.freq));
		break;
	case 0xb0:	case 0xb1:	case 0xb2:	case 0xb3:  case 0xb4:	case 0xb5:	case 0xb6:	case 0xb7:
	case 0xb8:	case 0xb9:	case 0xba:	case 0xbb:  case 0xbc:	case 0xbd:	case 0xbe:	case 0xbf:
	case 0xc0:	case 0xc1:	case 0xc2:	case 0xc3:  case 0xc4:	case 0xc5:	case 0xc6:	case 0xc7:
	case 0xc8:	case 0xc9:	case 0xca:	case 0xcb:  case 0xcc:	case 0xcd:	case 0xce:	case 0xcf:
		DSP_SB16_ONLY;
		/* Generic 8/16 bit DMA */
//		DSP_SetSpeaker(true);		//SB16 always has speaker enabled
		sb.dma.sign=(sb.dsp.in.data[0] & 0x10) > 0;
		DSP_PrepareDMA_New((sb.dsp.cmd & 0x10) ? DSP_DMA_16 : DSP_DMA_8,
			1+sb.dsp.in.data[1]+(sb.dsp.in.data[2] << 8),
			(sb.dsp.cmd & 0x4)>0,
			(sb.dsp.in.data[0] & 0x20) > 0
		);
		break;
	case 0xd5:	/* Halt 16-bit DMA */
		DSP_SB16_ONLY;
	case 0xd0:	/* Halt 8-bit DMA */
//		DSP_ChangeMode(MODE_NONE);
		LOG(LOG_SB, LOG_NORMAL)("Halt DMA Command");
//		Games sometimes already program a new dma before stopping, gives noise
		if (sb.mode==MODE_NONE) {
			// possibly different code here that does not switch to MODE_DMA_PAUSE
		}
		sb.mode=MODE_DMA_PAUSE;
		PIC_RemoveEvents(END_DMA_Event);
		break;
	case 0xd1:	/* Enable Speaker */
		DSP_SetSpeaker(true);
		break;
	case 0xd3:	/* Disable Speaker */
		DSP_SetSpeaker(false);
		break;
	case 0xd8:  /* Speaker status */
		DSP_SB2_ABOVE;
		DSP_FlushData();
		if (sb.speaker) DSP_AddData(0xff);
		else DSP_AddData(0x00);
		break;
	case 0xd6:	/* Continue DMA 16-bit */
		DSP_SB16_ONLY;
	case 0xd4:	/* Continue DMA 8-bit*/
		LOG(LOG_SB, LOG_NORMAL)("Continue DMA command");
		if (sb.mode==MODE_DMA_PAUSE) {
			sb.mode=MODE_DMA_MASKED;
			if (sb.dma.chan!=NULL) sb.dma.chan->Register_Callback(DSP_DMA_CallBack);
		}
		break;
	case 0xd9:  /* Exit Autoinitialize 16-bit */
		DSP_SB16_ONLY;
	case 0xda:	/* Exit Autoinitialize 8-bit */
		DSP_SB2_ABOVE;
		LOG(LOG_SB, LOG_NORMAL)("Exit Autoinit command");
		sb.dma.autoinit=false;		//Should stop itself
		break;
	case 0xe0:	/* DSP Identification - SB2.0+ */
		DSP_FlushData();
		DSP_AddData(~sb.dsp.in.data[0]);
		break;
	case 0xe1:	/* Get DSP Version */
		DSP_FlushData();
		switch (sb.type) {
		case SBT_1:
			DSP_AddData(0x1);DSP_AddData(0x05);break;
		case SBT_2:
			DSP_AddData(0x2);DSP_AddData(0x1);break;
		case SBT_PRO1:
			DSP_AddData(0x3);DSP_AddData(0x0);break;
		case SBT_PRO2:
			DSP_AddData(0x3);DSP_AddData(0x2);break;
		case SBT_16:
			DSP_AddData(0x4);DSP_AddData(0x5);break;
		default:
			break;
		}
		break;
	case 0xe2:	/* Weird DMA identification write routine */
		{
			LOG(LOG_SB,LOG_NORMAL)("DSP Function 0xe2");
			for (Bitu i = 0; i < 8; i++)
				if ((sb.dsp.in.data[0] >> i) & 0x01) sb.e2.value += E2_incr_table[sb.e2.count % 4][i];
			 sb.e2.value += E2_incr_table[sb.e2.count % 4][8];
			 sb.e2.count++;
			 GetDMAChannel(sb.hw.dma8)->Register_Callback(DSP_E2_DMA_CallBack);
		}
		break;
	case 0xe3:	/* DSP Copyright */
		{
			DSP_FlushData();
			for (size_t i=0;i<=strlen(copyright_string);i++) {
				DSP_AddData(copyright_string[i]);
			}
		}
		break;
	case 0xe4:	/* Write Test Register */
		sb.dsp.test_register=sb.dsp.in.data[0];
		break;
	case 0xe8:	/* Read Test Register */
		DSP_FlushData();
		DSP_AddData(sb.dsp.test_register);;
		break;
	case 0xf2:	/* Trigger 8bit IRQ */
		//Small delay in order to emulate the slowness of the DSP, fixes Llamatron 2012 and Lemmings 3D
		PIC_AddEvent(&DSP_RaiseIRQEvent,0.01f); 
		LOG(LOG_SB, LOG_NORMAL)("Trigger 8bit IRQ command");
		break;
	case 0xf3:   /* Trigger 16bit IRQ */
		DSP_SB16_ONLY; 
		SB_RaiseIRQ(SB_IRQ_16);
		LOG(LOG_SB, LOG_NORMAL)("Trigger 16bit IRQ command");
		break;
	case 0xf8:  /* Undocumented, pre-SB16 only */
		DSP_FlushData();
		DSP_AddData(0);
		break;
	case 0x30: case 0x31:
		LOG(LOG_SB,LOG_ERROR)("DSP:Unimplemented MIDI I/O command %2X",sb.dsp.cmd);
		break;
	case 0x34: case 0x35: case 0x36: case 0x37:
		DSP_SB2_ABOVE;
		LOG(LOG_SB,LOG_ERROR)("DSP:Unimplemented MIDI UART command %2X",sb.dsp.cmd);
		break;
	case 0x7f: case 0x1f:
		DSP_SB2_ABOVE;
		LOG(LOG_SB,LOG_ERROR)("DSP:Unimplemented auto-init DMA ADPCM command %2X",sb.dsp.cmd);
		break;
	case 0x20:
		DSP_AddData(0x7f);   // fake silent input for Creative parrot
		break;
	case 0x2c:
	case 0x98: case 0x99: /* Documented only for DSP 2.x and 3.x */
	case 0xa0: case 0xa8: /* Documented only for DSP 3.x */
		LOG(LOG_SB,LOG_ERROR)("DSP:Unimplemented input command %2X",sb.dsp.cmd);
		break;
	case 0xf9:	/* SB16 ASP ??? */
		if (sb.type == SBT_16) {
			LOG(LOG_SB,LOG_NORMAL)("SB16 ASP unknown function %x",sb.dsp.in.data[0]);
			// just feed it what it expects
			switch (sb.dsp.in.data[0]) {
			case 0x0b:
				DSP_AddData(0x00);
				break;
			case 0x0e:
				DSP_AddData(0xff);
				break;
			case 0x0f:
				DSP_AddData(0x07);
				break;
			case 0x23:
				DSP_AddData(0x00);
				break;
			case 0x24:
				DSP_AddData(0x00);
				break;
			case 0x2b:
				DSP_AddData(0x00);
				break;
			case 0x2c:
				DSP_AddData(0x00);
				break;
			case 0x2d:
				DSP_AddData(0x00);
				break;
			case 0x37:
				DSP_AddData(0x38);
				break;
			default:
				DSP_AddData(0x00);
				break;
			}
		} else {
			LOG(LOG_SB,LOG_NORMAL)("SB16 ASP unknown function %X",sb.dsp.cmd);
		}
		break;
	default:
		LOG(LOG_SB,LOG_ERROR)("DSP:Unhandled (undocumented) command %2X",sb.dsp.cmd);
		break;
	}
	sb.dsp.cmd=DSP_NO_COMMAND;
	sb.dsp.cmd_len=0;
	sb.dsp.in.pos=0;
}

static void DSP_DoWrite(Bit8u val) {
	switch (sb.dsp.cmd) {
	case DSP_NO_COMMAND:
		sb.dsp.cmd=val;
		if (sb.type == SBT_16) sb.dsp.cmd_len=DSP_cmd_len_sb16[val];
		else sb.dsp.cmd_len=DSP_cmd_len_sb[val];
		sb.dsp.in.pos=0;
		if (!sb.dsp.cmd_len) DSP_DoCommand();
		break;
	default:
		sb.dsp.in.data[sb.dsp.in.pos]=val;
		sb.dsp.in.pos++;
		if (sb.dsp.in.pos>=sb.dsp.cmd_len) DSP_DoCommand();
	}
}

static Bit8u DSP_ReadData(void) {
/* Static so it repeats the last value on succesive reads (JANGLE DEMO) */
	if (sb.dsp.out.used) {
		sb.dsp.out.lastval=sb.dsp.out.data[sb.dsp.out.pos];
		sb.dsp.out.pos++;
		if (sb.dsp.out.pos>=DSP_BUFSIZE) sb.dsp.out.pos-=DSP_BUFSIZE;
		sb.dsp.out.used--;
	}
	return sb.dsp.out.lastval;
}

static float calc_vol(Bit8u amount) {
	Bit8u count = 31 - amount;
	float db = static_cast<float>(count);
	if (sb.type == SBT_PRO1 || sb.type == SBT_PRO2) {
		if (count) {
			if (count < 16) db -= 1.0f;
			else if (count > 16) db += 1.0f;
			if (count == 24) db += 2.0f;
			if (count > 27) return 0.0f; //turn it off.
		}
	} else { //Give the rest, the SB16 scale, as we don't have data.
		db *= 2.0f;
		if (count > 20) db -= 1.0f;
	}
	return (float) pow (10.0f,-0.05f * db);
}
static void CTMIXER_UpdateVolumes(void) {
	if (!sb.mixer.enabled) return;
	MixerChannel * chan;
	float m0 = calc_vol(sb.mixer.master[0]);
	float m1 = calc_vol(sb.mixer.master[1]);
	chan = MIXER_FindChannel("SB");
	if (chan) chan->SetVolume(m0 * calc_vol(sb.mixer.dac[0]), m1 * calc_vol(sb.mixer.dac[1]));
	chan = MIXER_FindChannel("FM");
	if (chan) chan->SetVolume(m0 * calc_vol(sb.mixer.fm[0]) , m1 * calc_vol(sb.mixer.fm[1]) );
	chan = MIXER_FindChannel("CDAUDIO");
	if (chan) chan->SetVolume(m0 * calc_vol(sb.mixer.cda[0]), m1 * calc_vol(sb.mixer.cda[1]));
}

static void CTMIXER_Reset(void) {
	sb.mixer.fm[0]=
	sb.mixer.fm[1]=
	sb.mixer.cda[0]=
	sb.mixer.cda[1]=
	sb.mixer.dac[0]=
	sb.mixer.dac[1]=31;
	sb.mixer.master[0]=
	sb.mixer.master[1]=31;
	CTMIXER_UpdateVolumes();
}

#define SETPROVOL(_WHICH_,_VAL_)										\
	_WHICH_[0]=   ((((_VAL_) & 0xf0) >> 3)|(sb.type==SBT_16 ? 1:3));	\
	_WHICH_[1]=   ((((_VAL_) & 0x0f) << 1)|(sb.type==SBT_16 ? 1:3));	\

#define MAKEPROVOL(_WHICH_)											\
	((((_WHICH_[0] & 0x1e) << 3) | ((_WHICH_[1] & 0x1e) >> 1)) |	\
		((sb.type==SBT_PRO1 || sb.type==SBT_PRO2) ? 0x11:0))

static void DSP_ChangeStereo(bool stereo) {
	if (!sb.dma.stereo && stereo) {
		sb.chan->SetFreq(sb.freq/2);
		sb.dma.mul*=2;
		sb.dma.rate=(sb.freq*sb.dma.mul) >> SB_SH;
		sb.dma.min=(sb.dma.rate*3)/1000;
	} else if (sb.dma.stereo && !stereo) {
		sb.chan->SetFreq(sb.freq);
		sb.dma.mul/=2;
		sb.dma.rate=(sb.freq*sb.dma.mul) >> SB_SH;
		sb.dma.min=(sb.dma.rate*3)/1000;
	}
	sb.dma.stereo=stereo;
}

static void CTMIXER_Write(Bit8u val) {
	switch (sb.mixer.index) {
	case 0x00:		/* Reset */
		CTMIXER_Reset();
		LOG(LOG_SB,LOG_WARN)("Mixer reset value %x",val);
		break;
	case 0x02:		/* Master Volume (SB2 Only) */
		SETPROVOL(sb.mixer.master,(val&0xf)|(val<<4));
		CTMIXER_UpdateVolumes();
		break;
	case 0x04:		/* DAC Volume (SBPRO) */
		SETPROVOL(sb.mixer.dac,val);
		CTMIXER_UpdateVolumes();
		break;
	case 0x06:		/* FM output selection, Somewhat obsolete with dual OPL SBpro + FM volume (SB2 Only) */
		//volume controls both channels
		SETPROVOL(sb.mixer.fm,(val&0xf)|(val<<4));
		CTMIXER_UpdateVolumes();
		if(val&0x60) LOG(LOG_SB,LOG_WARN)("Turned FM one channel off. not implemented %X",val);
		//TODO Change FM Mode if only 1 fm channel is selected
		break;
	case 0x08:		/* CDA Volume (SB2 Only) */
		SETPROVOL(sb.mixer.cda,(val&0xf)|(val<<4));
		CTMIXER_UpdateVolumes();
		break;
	case 0x0a:		/* Mic Level (SBPRO) or DAC Volume (SB2): 2-bit, 3-bit on SB16 */
		if (sb.type==SBT_2) {
			sb.mixer.dac[0]=sb.mixer.dac[1]=((val & 0x6) << 2)|3;
			CTMIXER_UpdateVolumes();
		} else {
			sb.mixer.mic=((val & 0x7) << 2)|(sb.type==SBT_16?1:3);
		}
		break;
	case 0x0e:		/* Output/Stereo Select */
		sb.mixer.stereo=(val & 0x2) > 0;
		sb.mixer.filtered=(val & 0x20) > 0;
		DSP_ChangeStereo(sb.mixer.stereo);
		LOG(LOG_SB,LOG_WARN)("Mixer set to %s",sb.dma.stereo ? "STEREO" : "MONO");
		break;
	case 0x22:		/* Master Volume (SBPRO) */
		SETPROVOL(sb.mixer.master,val);
		CTMIXER_UpdateVolumes();
		break;
	case 0x26:		/* FM Volume (SBPRO) */
		SETPROVOL(sb.mixer.fm,val);
		CTMIXER_UpdateVolumes();
		break;
	case 0x28:		/* CD Audio Volume (SBPRO) */
		SETPROVOL(sb.mixer.cda,val);
		CTMIXER_UpdateVolumes();
		break;
	case 0x2e:		/* Line-in Volume (SBPRO) */
		SETPROVOL(sb.mixer.lin,val);
		break;
	//case 0x20:		/* Master Volume Left (SBPRO) ? */
	case 0x30:		/* Master Volume Left (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.master[0]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	//case 0x21:		/* Master Volume Right (SBPRO) ? */
	case 0x31:		/* Master Volume Right (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.master[1]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x32:		/* DAC Volume Left (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.dac[0]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x33:		/* DAC Volume Right (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.dac[1]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x34:		/* FM Volume Left (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.fm[0]=val>>3;
			CTMIXER_UpdateVolumes();
		}
                break;
	case 0x35:		/* FM Volume Right (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.fm[1]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x36:		/* CD Volume Left (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.cda[0]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x37:		/* CD Volume Right (SB16) */
		if (sb.type==SBT_16) {
			sb.mixer.cda[1]=val>>3;
			CTMIXER_UpdateVolumes();
		}
		break;
	case 0x38:		/* Line-in Volume Left (SB16) */
		if (sb.type==SBT_16) sb.mixer.lin[0]=val>>3;
		break;
	case 0x39:		/* Line-in Volume Right (SB16) */
		if (sb.type==SBT_16) sb.mixer.lin[1]=val>>3;
		break;
	case 0x3a:
		if (sb.type==SBT_16) sb.mixer.mic=val>>3;
		break;
	case 0x80:		/* IRQ Select */
		sb.hw.irq=0xff;
		if (val & 0x1) sb.hw.irq=2;
		else if (val & 0x2) sb.hw.irq=5;
		else if (val & 0x4) sb.hw.irq=7;
		else if (val & 0x8) sb.hw.irq=10;
		break;
	case 0x81:		/* DMA Select */
		sb.hw.dma8=0xff;
		sb.hw.dma16=0xff;
		if (val & 0x1) sb.hw.dma8=0;
		else if (val & 0x2) sb.hw.dma8=1;
		else if (val & 0x8) sb.hw.dma8=3;
		if (val & 0x20) sb.hw.dma16=5;
		else if (val & 0x40) sb.hw.dma16=6;
		else if (val & 0x80) sb.hw.dma16=7;
		LOG(LOG_SB,LOG_NORMAL)("Mixer select dma8:%x dma16:%x",sb.hw.dma8,sb.hw.dma16);
		break;
	default:

		if(	((sb.type == SBT_PRO1 || sb.type == SBT_PRO2) && sb.mixer.index==0x0c) || /* Input control on SBPro */
			 (sb.type == SBT_16 && sb.mixer.index >= 0x3b && sb.mixer.index <= 0x47)) /* New SB16 registers */
			sb.mixer.unhandled[sb.mixer.index] = val;
		LOG(LOG_SB,LOG_WARN)("MIXER:Write %X to unhandled index %X",val,sb.mixer.index);
	}
}

static Bit8u CTMIXER_Read(void) {
	Bit8u ret;
//	if ( sb.mixer.index< 0x80) LOG_MSG("Read mixer %x",sb.mixer.index);
	switch (sb.mixer.index) {
	case 0x00:		/* RESET */
		return 0x00;
	case 0x02:		/* Master Volume (SB2 Only) */
		return ((sb.mixer.master[1]>>1) & 0xe);
	case 0x22:		/* Master Volume (SBPRO) */
		return	MAKEPROVOL(sb.mixer.master);
	case 0x04:		/* DAC Volume (SBPRO) */
		return MAKEPROVOL(sb.mixer.dac);
	case 0x06:		/* FM Volume (SB2 Only) + FM output selection */
		return ((sb.mixer.fm[1]>>1) & 0xe);
	case 0x08:		/* CD Volume (SB2 Only) */
		return ((sb.mixer.cda[1]>>1) & 0xe);
	case 0x0a:		/* Mic Level (SBPRO) or Voice (SB2 Only) */
		if (sb.type==SBT_2) return (sb.mixer.dac[0]>>2);
		else return ((sb.mixer.mic >> 2) & (sb.type==SBT_16 ? 7:6));
	case 0x0e:		/* Output/Stereo Select */
		return 0x11|(sb.mixer.stereo ? 0x02 : 0x00)|(sb.mixer.filtered ? 0x20 : 0x00);
	case 0x26:		/* FM Volume (SBPRO) */
		return MAKEPROVOL(sb.mixer.fm);
	case 0x28:		/* CD Audio Volume (SBPRO) */
		return MAKEPROVOL(sb.mixer.cda);
	case 0x2e:		/* Line-IN Volume (SBPRO) */
		return MAKEPROVOL(sb.mixer.lin);
	case 0x30:		/* Master Volume Left (SB16) */
		if (sb.type==SBT_16) return sb.mixer.master[0]<<3;
		ret=0xa;
		break;
	case 0x31:		/* Master Volume Right (S16) */
		if (sb.type==SBT_16) return sb.mixer.master[1]<<3;
		ret=0xa;
		break;
	case 0x32:		/* DAC Volume Left (SB16) */
		if (sb.type==SBT_16) return sb.mixer.dac[0]<<3;
		ret=0xa;
		break;
	case 0x33:		/* DAC Volume Right (SB16) */
		if (sb.type==SBT_16) return sb.mixer.dac[1]<<3;
		ret=0xa;
		break;
	case 0x34:		/* FM Volume Left (SB16) */
		if (sb.type==SBT_16) return sb.mixer.fm[0]<<3;
		ret=0xa;
		break;
	case 0x35:		/* FM Volume Right (SB16) */
		if (sb.type==SBT_16) return sb.mixer.fm[1]<<3;
		ret=0xa;
		break;
	case 0x36:		/* CD Volume Left (SB16) */
		if (sb.type==SBT_16) return sb.mixer.cda[0]<<3;
		ret=0xa;
		break;
	case 0x37:		/* CD Volume Right (SB16) */
		if (sb.type==SBT_16) return sb.mixer.cda[1]<<3;
		ret=0xa;
		break;
	case 0x38:		/* Line-in Volume Left (SB16) */
		if (sb.type==SBT_16) return sb.mixer.lin[0]<<3;
		ret=0xa;
		break;
	case 0x39:		/* Line-in Volume Right (SB16) */
		if (sb.type==SBT_16) return sb.mixer.lin[1]<<3;
		ret=0xa;
		break;
	case 0x3a:		/* Mic Volume (SB16) */
		if (sb.type==SBT_16) return sb.mixer.mic<<3;
		ret=0xa;
		break;
	case 0x80:		/* IRQ Select */
		switch (sb.hw.irq) {
		case 2:  return 0x1;
		case 5:  return 0x2;
		case 7:  return 0x4;
		case 10: return 0x8;
		}
	case 0x81:		/* DMA Select */
		ret=0;
		switch (sb.hw.dma8) {
		case 0:ret|=0x1;break;
		case 1:ret|=0x2;break;
		case 3:ret|=0x8;break;
		}
		switch (sb.hw.dma16) {
		case 5:ret|=0x20;break;
		case 6:ret|=0x40;break;
		case 7:ret|=0x80;break;
		}
		return ret;
	case 0x82:		/* IRQ Status */
		return	(sb.irq.pending_8bit ? 0x1 : 0) |
				(sb.irq.pending_16bit ? 0x2 : 0) | 
				((sb.type == SBT_16) ? 0x20 : 0);
	default:
		if (	((sb.type == SBT_PRO1 || sb.type == SBT_PRO2) && sb.mixer.index==0x0c) || /* Input control on SBPro */
			(sb.type == SBT_16 && sb.mixer.index >= 0x3b && sb.mixer.index <= 0x47)) /* New SB16 registers */
			ret = sb.mixer.unhandled[sb.mixer.index];
		else
			ret=0xa;
		LOG(LOG_SB,LOG_WARN)("MIXER:Read from unhandled index %X",sb.mixer.index);
	}
	return ret;
}


static Bitu read_sb(Bitu port,Bitu /*iolen*/) {
	switch (port-sb.hw.base) {
	case MIXER_INDEX:
		return sb.mixer.index;
	case MIXER_DATA:
		return CTMIXER_Read();
	case DSP_READ_DATA:
		return DSP_ReadData();
	case DSP_READ_STATUS:
		//TODO See for high speed dma :)
		if (sb.irq.pending_8bit)  {
			sb.irq.pending_8bit=false;
			PIC_DeActivateIRQ(sb.hw.irq);
		}
		if (sb.dsp.out.used) return 0xff;
		else return 0x7f;
	case DSP_ACK_16BIT:
		sb.irq.pending_16bit=false;
		break;
	case DSP_WRITE_STATUS:
		switch (sb.dsp.state) {
		case DSP_S_NORMAL:
			sb.dsp.write_busy++;
			if (sb.dsp.write_busy & 8) return 0xff;
			return 0x7f;
		case DSP_S_RESET:
		case DSP_S_RESET_WAIT:
			return 0xff;
		}
		return 0xff;
	case DSP_RESET:
		return 0xff;
	default:
		LOG(LOG_SB,LOG_NORMAL)("Unhandled read from SB Port %4X",port);
		break;
	}
	return 0xff;
}

static void write_sb(Bitu port,Bitu val,Bitu /*iolen*/) {
	Bit8u val8=(Bit8u)(val&0xff);
	switch (port-sb.hw.base) {
	case DSP_RESET:
		DSP_DoReset(val8);
		break;
	case DSP_WRITE_DATA:
		DSP_DoWrite(val8);
		break;
	case MIXER_INDEX:
		sb.mixer.index=val8;
		break;
	case MIXER_DATA:
		CTMIXER_Write(val8);
		break;
	default:
		LOG(LOG_SB,LOG_NORMAL)("Unhandled write to SB Port %4X",port);
		break;
	}
}

static void adlib_gusforward(Bitu /*port*/,Bitu val,Bitu /*iolen*/) {
	adlib_commandreg=(Bit8u)(val&0xff);
}

bool SB_Get_Address(Bitu& sbaddr, Bitu& sbirq, Bitu& sbdma) {
	sbaddr=0;
	sbirq =0;
	sbdma =0;
	if (sb.type == SBT_NONE) return false;
	else {
		sbaddr=sb.hw.base;
		sbirq =sb.hw.irq;
		sbdma = sb.hw.dma8;
		return true;
	}
}

static void SBLASTER_CallBack(Bitu len) {
	switch (sb.mode) {
	case MODE_NONE:
	case MODE_DMA_PAUSE:
	case MODE_DMA_MASKED:
		sb.chan->AddSilence();
		break;
	case MODE_DAC:
//		GenerateDACSound(len);
//		break;
		if (!sb.dac.used) {
			sb.mode=MODE_NONE;
			return;
		}
		sb.chan->AddStretched(sb.dac.used,sb.dac.data);
		sb.dac.used=0;
		break;
	case MODE_DMA:
		len*=sb.dma.mul;
		if (len&SB_SH_MASK) len+=1 << SB_SH;
		len>>=SB_SH;
		if (len>sb.dma.left) len=sb.dma.left;
		GenerateDMASound(len);
		break;
	}
}

class SBLASTER: public Module_base {
private:
	/* Data */
	IO_ReadHandleObject ReadHandler[0x10];
	IO_WriteHandleObject WriteHandler[0x10];
	AutoexecObject autoexecline;
	MixerObject MixerChan;
	OPL_Mode oplmode;

	/* Support Functions */
	void Find_Type_And_Opl(Section_prop* config,SB_TYPES& type, OPL_Mode& opl_mode){
		const char * sbtype=config->Get_string("sbtype");
		if (!strcasecmp(sbtype,"sb1")) type=SBT_1;
		else if (!strcasecmp(sbtype,"sb2")) type=SBT_2;
		else if (!strcasecmp(sbtype,"sbpro1")) type=SBT_PRO1;
		else if (!strcasecmp(sbtype,"sbpro2")) type=SBT_PRO2;
		else if (!strcasecmp(sbtype,"sb16")) type=SBT_16;
		else if (!strcasecmp(sbtype,"gb")) type=SBT_GB;
		else if (!strcasecmp(sbtype,"none")) type=SBT_NONE;
		else type=SBT_16;

		if (type==SBT_16) {
			if ((!IS_EGAVGA_ARCH) || !SecondDMAControllerAvailable()) type=SBT_PRO2;
		}
			
		/* OPL/CMS Init */
		const char * omode=config->Get_string("oplmode");
		if (!strcasecmp(omode,"none")) opl_mode=OPL_none;	
		else if (!strcasecmp(omode,"cms")) opl_mode=OPL_cms;
		else if (!strcasecmp(omode,"opl2")) opl_mode=OPL_opl2;
		else if (!strcasecmp(omode,"dualopl2")) opl_mode=OPL_dualopl2;
		else if (!strcasecmp(omode,"opl3")) opl_mode=OPL_opl3;
		else if (!strcasecmp(omode,"opl3gold")) opl_mode=OPL_opl3gold;
		/* Else assume auto */
		else {
			switch (type) {
			case SBT_NONE:
				opl_mode=OPL_none;
				break;
			case SBT_GB:
				opl_mode=OPL_cms;
				break;
			case SBT_1:
			case SBT_2:
				opl_mode=OPL_opl2;
				break;
			case SBT_PRO1:
				opl_mode=OPL_dualopl2;
				break;
			case SBT_PRO2:
			case SBT_16:
				opl_mode=OPL_opl3;
				break;
			}
		}	
	}
public:
	SBLASTER(Section* configuration):Module_base(configuration) {
		Bitu i;
		Section_prop * section=static_cast<Section_prop *>(configuration);

		sb.hw.base=section->Get_hex("sbbase");
		sb.hw.irq=section->Get_int("irq");
		Bitu dma8bit=section->Get_int("dma");
		if (dma8bit>0xff) dma8bit=0xff;
		sb.hw.dma8=(Bit8u)(dma8bit&0xff);
		Bitu dma16bit=section->Get_int("hdma");
		if (dma16bit>0xff) dma16bit=0xff;
		sb.hw.dma16=(Bit8u)(dma16bit&0xff);

		sb.mixer.enabled=section->Get_bool("sbmixer");
		sb.mixer.stereo=false;

		Find_Type_And_Opl(section,sb.type,oplmode);
	
		switch (oplmode) {
		case OPL_none:
			WriteHandler[0].Install(0x388,adlib_gusforward,IO_MB);
			break;
		case OPL_cms:
			WriteHandler[0].Install(0x388,adlib_gusforward,IO_MB);
			CMS_Init(section);
			break;
		case OPL_opl2:
			CMS_Init(section);
			// fall-through
		case OPL_dualopl2:
		case OPL_opl3:
		case OPL_opl3gold:
			OPL_Init(section,oplmode);
			break;
		}
		if (sb.type==SBT_NONE || sb.type==SBT_GB) return;

		sb.chan=MixerChan.Install(&SBLASTER_CallBack,22050,"SB");
		sb.dsp.state=DSP_S_NORMAL;
		sb.dsp.out.lastval=0xaa;
		sb.dma.chan=NULL;

		for (i=4;i<=0xf;i++) {
			if (i==8 || i==9) continue;
			//Disable mixer ports for lower soundblaster
			if ((sb.type==SBT_1 || sb.type==SBT_2) && (i==4 || i==5)) continue; 
			ReadHandler[i].Install(sb.hw.base+i,read_sb,IO_MB);
			WriteHandler[i].Install(sb.hw.base+i,write_sb,IO_MB);
		}
		for (i=0;i<256;i++) ASP_regs[i] = 0;
		ASP_regs[5] = 0x01;
		ASP_regs[9] = 0xf8;

		DSP_Reset();
		CTMIXER_Reset();

		// The documentation does not specify if SB gets initialized with the speaker enabled
		// or disabled. Real SBPro2 has it disabled. 
		sb.speaker=false;
		// On SB16 the speaker flag does not affect actual speaker state.
		if (sb.type == SBT_16) sb.chan->Enable(true);
		else sb.chan->Enable(false);

		// Create set blaster line
		ostringstream temp;
		temp << "SET BLASTER=A" << setw(3)<< hex << sb.hw.base
		     << " I" << dec << (Bitu)sb.hw.irq << " D" << (Bitu)sb.hw.dma8;
		if (sb.type==SBT_16) temp << " H" << (Bitu)sb.hw.dma16;
		temp << " T" << static_cast<unsigned int>(sb.type) << ends;

		autoexecline.Install(temp.str());

		/* Soundblaster midi interface */
		if (!MIDI_Available()) sb.midi = false;
		else sb.midi = true;
	}	
	
	~SBLASTER() {
		switch (oplmode) {
		case OPL_none:
			break;
		case OPL_cms:
			CMS_ShutDown(m_configuration);
			break;
		case OPL_opl2:
			CMS_ShutDown(m_configuration);
			// fall-through
		case OPL_dualopl2:
		case OPL_opl3:
		case OPL_opl3gold:
			OPL_ShutDown(m_configuration);
			break;
		}
		if (sb.type==SBT_NONE || sb.type==SBT_GB) return;
		DSP_Reset(); // Stop everything	
	}	
}; //End of SBLASTER class


static SBLASTER* test;
void SBLASTER_ShutDown(Section* /*sec*/) {
	delete test;	
}

void SBLASTER_Init(Section* sec) {
	test = new SBLASTER(sec);
	sec->AddDestroyFunction(&SBLASTER_ShutDown,true);
}