/* * Copyright (C) 2002-2019 The DOSBox Team * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include "dosbox.h" #include "inout.h" #include "mem.h" #include "pci_bus.h" #include "setup.h" #include "debug.h" #include "callback.h" #include "regs.h" #if defined(PCI_FUNCTIONALITY_ENABLED) static Bit32u pci_caddress=0; // current PCI addressing static Bitu pci_devices_installed=0; // number of registered PCI devices static Bit8u pci_cfg_data[PCI_MAX_PCIDEVICES][PCI_MAX_PCIFUNCTIONS][256]; // PCI configuration data static PCI_Device* pci_devices[PCI_MAX_PCIDEVICES]; // registered PCI devices // PCI address // 31 - set for a PCI access // 30-24 - 0 // 23-16 - bus number (0x00ff0000) // 15-11 - device number (slot) (0x0000f800) // 10- 8 - subfunction number (0x00000700) // 7- 2 - config register # (0x000000fc) static void write_pci_addr(Bitu port,Bitu val,Bitu iolen) { LOG(LOG_PCI,LOG_NORMAL)("Write PCI address :=%x",val); pci_caddress=val; } static void write_pci_register(PCI_Device* dev,Bit8u regnum,Bit8u value) { // vendor/device/class IDs/header type/etc. are read-only if ((regnum<0x04) || ((regnum>=0x06) && (regnum<0x0c)) || (regnum==0x0e)) return; if (dev==NULL) return; switch (pci_cfg_data[dev->PCIId()][dev->PCISubfunction()][0x0e]&0x7f) { // header-type specific handling case 0x00: if ((regnum>=0x28) && (regnum<0x30)) return; // subsystem information is read-only break; case 0x01: case 0x02: default: break; } // call device routine for special actions and the // possibility to discard/replace the value that is to be written Bits parsed_register=dev->ParseWriteRegister(regnum,value); if (parsed_register>=0) pci_cfg_data[dev->PCIId()][dev->PCISubfunction()][regnum]=(Bit8u)(parsed_register&0xff); } static void write_pci(Bitu port,Bitu val,Bitu iolen) { LOG(LOG_PCI,LOG_NORMAL)("Write PCI data :=%x (len %d)",port,val,iolen); // check for enabled/bus 0 if ((pci_caddress & 0x80ff0000) == 0x80000000) { Bit8u devnum = (Bit8u)((pci_caddress >> 11) & 0x1f); Bit8u fctnum = (Bit8u)((pci_caddress >> 8) & 0x7); Bit8u regnum = (Bit8u)((pci_caddress & 0xfc) + (port & 0x03)); LOG(LOG_PCI,LOG_NORMAL)(" Write to device %x register %x (function %x) (:=%x)",devnum,regnum,fctnum,val); if (devnum>=pci_devices_installed) return; PCI_Device* masterdev=pci_devices[devnum]; if (masterdev==NULL) return; if (fctnum>masterdev->NumSubdevices()) return; PCI_Device* dev=masterdev->GetSubdevice(fctnum); if (dev==NULL) return; // write data to PCI device/configuration switch (iolen) { case 1: write_pci_register(dev,regnum+0,(Bit8u)(val&0xff)); break; case 2: write_pci_register(dev,regnum+0,(Bit8u)(val&0xff)); write_pci_register(dev,regnum+1,(Bit8u)((val>>8)&0xff)); break; case 4: write_pci_register(dev,regnum+0,(Bit8u)(val&0xff)); write_pci_register(dev,regnum+1,(Bit8u)((val>>8)&0xff)); write_pci_register(dev,regnum+2,(Bit8u)((val>>16)&0xff)); write_pci_register(dev,regnum+3,(Bit8u)((val>>24)&0xff)); break; } } } static Bitu read_pci_addr(Bitu port,Bitu iolen) { LOG(LOG_PCI,LOG_NORMAL)("Read PCI address -> %x",pci_caddress); return pci_caddress; } // read single 8bit value from register file (special register treatment included) static Bit8u read_pci_register(PCI_Device* dev,Bit8u regnum) { switch (regnum) { case 0x00: return (Bit8u)(dev->VendorID()&0xff); case 0x01: return (Bit8u)((dev->VendorID()>>8)&0xff); case 0x02: return (Bit8u)(dev->DeviceID()&0xff); case 0x03: return (Bit8u)((dev->DeviceID()>>8)&0xff); case 0x0e: return (pci_cfg_data[dev->PCIId()][dev->PCISubfunction()][regnum]&0x7f) | ((dev->NumSubdevices()>0)?0x80:0x00); default: break; } // call device routine for special actions and possibility to discard/remap register Bits parsed_regnum=dev->ParseReadRegister(regnum); if ((parsed_regnum>=0) && (parsed_regnum<256)) return pci_cfg_data[dev->PCIId()][dev->PCISubfunction()][parsed_regnum]; Bit8u newval, mask; if (dev->OverrideReadRegister(regnum, &newval, &mask)) { Bit8u oldval=pci_cfg_data[dev->PCIId()][dev->PCISubfunction()][regnum] & (~mask); return oldval | (newval & mask); } return 0xff; } static Bitu read_pci(Bitu port,Bitu iolen) { LOG(LOG_PCI,LOG_NORMAL)("Read PCI data -> %x",pci_caddress); if ((pci_caddress & 0x80ff0000) == 0x80000000) { Bit8u devnum = (Bit8u)((pci_caddress >> 11) & 0x1f); Bit8u fctnum = (Bit8u)((pci_caddress >> 8) & 0x7); Bit8u regnum = (Bit8u)((pci_caddress & 0xfc) + (port & 0x03)); if (devnum>=pci_devices_installed) return 0xffffffff; LOG(LOG_PCI,LOG_NORMAL)(" Read from device %x register %x (function %x); addr %x", devnum,regnum,fctnum,pci_caddress); PCI_Device* masterdev=pci_devices[devnum]; if (masterdev==NULL) return 0xffffffff; if (fctnum>masterdev->NumSubdevices()) return 0xffffffff; PCI_Device* dev=masterdev->GetSubdevice(fctnum); if (dev!=NULL) { switch (iolen) { case 1: { Bit8u val8=read_pci_register(dev,regnum); return val8; } case 2: { Bit16u val16=read_pci_register(dev,regnum); val16|=(read_pci_register(dev,regnum+1)<<8); return val16; } case 4: { Bit32u val32=read_pci_register(dev,regnum); val32|=(read_pci_register(dev,regnum+1)<<8); val32|=(read_pci_register(dev,regnum+2)<<16); val32|=(read_pci_register(dev,regnum+3)<<24); return val32; } default: break; } } } return 0xffffffff; } static Bitu PCI_PM_Handler() { LOG_MSG("PCI PMode handler, function %x",reg_ax); return CBRET_NONE; } PCI_Device::PCI_Device(Bit16u vendor, Bit16u device) { pci_id=-1; pci_subfunction=-1; vendor_id=vendor; device_id=device; num_subdevices=0; for (Bitu dct=0;dct=0) && (number=0) && (subfct0) && (subfctNumSubdevices()) { delete subdevices[subfct-1]; subdevices[subfct-1]=NULL; // should adjust things like num_subdevices as well... } } } PCI_Device* PCI_Device::GetSubdevice(Bits subfct) { if (subfct>=PCI_MAX_PCIFUNCTIONS) return NULL; if (subfct>0) { if (subfct<=this->NumSubdevices()) return subdevices[subfct-1]; } else if (subfct==0) { return this; } return NULL; } // queued devices (PCI device registering requested before the PCI framework was initialized) static const Bitu max_rqueued_devices=16; static Bitu num_rqueued_devices=0; static PCI_Device* rqueued_devices[max_rqueued_devices]; #include "pci_devices.h" class PCI:public Module_base{ private: bool initialized; protected: IO_WriteHandleObject PCI_WriteHandler[5]; IO_ReadHandleObject PCI_ReadHandler[5]; CALLBACK_HandlerObject callback_pci; public: PhysPt GetPModeCallbackPointer(void) { return Real2Phys(callback_pci.Get_RealPointer()); } bool IsInitialized(void) { return initialized; } // set up port handlers and configuration data void InitializePCI(void) { // install PCI-addressing ports PCI_WriteHandler[0].Install(0xcf8,write_pci_addr,IO_MD); PCI_ReadHandler[0].Install(0xcf8,read_pci_addr,IO_MD); // install PCI-register read/write handlers for (Bitu ct=0;ct<4;ct++) { PCI_WriteHandler[1+ct].Install(0xcfc+ct,write_pci,IO_MB); PCI_ReadHandler[1+ct].Install(0xcfc+ct,read_pci,IO_MB); } for (Bitu dev=0; dev=0) { // specific slot specified, basic check for validity if (slot>=PCI_MAX_PCIDEVICES) return -1; } else { // auto-add to new slot, check if one is still free if (pci_devices_installed>=PCI_MAX_PCIDEVICES) return -1; } if (!initialized) InitializePCI(); if (slot<0) slot=pci_devices_installed; // use next slot Bits subfunction=0; // main device unless specific already-occupied slot is requested if (pci_devices[slot]!=NULL) { subfunction=pci_devices[slot]->GetNextSubdeviceNumber(); if (subfunction<0) E_Exit("Too many PCI subdevices!"); } if (device->InitializeRegisters(pci_cfg_data[slot][subfunction])) { device->SetPCIId(slot, subfunction); if (pci_devices[slot]==NULL) { pci_devices[slot]=device; pci_devices_installed++; } else { pci_devices[slot]->AddSubdevice(device); } return slot; } return -1; } void Deinitialize(void) { initialized=false; pci_devices_installed=0; num_rqueued_devices=0; pci_caddress=0; for (Bitu dev=0; devNumSubdevices()>0) { for (Bitu sct=1;sctGetSubdevice(sct); if (sdev!=NULL) { if ((sdev->VendorID()==vendor_id) && (sdev->DeviceID()==device_id)) { pci_devices[dct]->RemoveSubdevice(sct); } } } } if ((pci_devices[dct]->VendorID()==vendor_id) && (pci_devices[dct]->DeviceID()==device_id)) { delete pci_devices[dct]; pci_devices[dct]=NULL; } } } // check if all devices have been removed bool any_device_left=false; for (Bitu dct=0;dct=pci_devices_installed) break; if (pci_devices[dct]!=NULL) { any_device_left=true; break; } } if (!any_device_left) Deinitialize(); Bitu last_active_device=PCI_MAX_PCIDEVICES; for (Bitu dct=0;dct0) { // register all devices that have been added before the PCI bus was instantiated for (Bitu dct=0;dctRegisterPCIDevice(rqueued_devices[dct]); } num_rqueued_devices=0; } } ~PCI(){ initialized=false; pci_devices_installed=0; num_rqueued_devices=0; } }; static PCI* pci_interface=NULL; PhysPt PCI_GetPModeInterface(void) { if (pci_interface) { return pci_interface->GetPModeCallbackPointer(); } return 0; } bool PCI_IsInitialized() { if (pci_interface) return pci_interface->IsInitialized(); return false; } void PCI_ShutDown(Section* sec){ delete pci_interface; pci_interface=NULL; } void PCI_Init(Section* sec) { pci_interface = new PCI(sec); sec->AddDestroyFunction(&PCI_ShutDown,false); } #endif