frodo-wii/Docs/sam.html

283 lines
7.4 KiB
HTML
Raw Normal View History

2009-01-13 19:46:42 +01:00
<HTML>
<HEAD>
<TITLE>SAM</TITLE>
</HEAD>
<BODY>
<H1>SAM</H1>
<CITE>
"Frodo! Mr.Frodo, my dear!" cried Sam,<BR>
tears almost blinding him. "It's Sam, I've come!"
</CITE>
<HR>
Frodo has a built-in machine language monitor that can be activated at any
time by pressing F9 (Unix) or selecting the appropriate menu item (BeOS/AmigaOS/MacOS):
SAM (Simple Assembler and Monitor). It provides full access to the memory
and hardware of the emulated C64 and 1541 (under BeOS, you must only start
SAM if you launched Frodo from the Shell).<P>
SAM is controlled by a command-based interface, all numbers are in hex.
With the command "h" you can display a list of all commands. The command
"x" quits SAM and returns to Frodo.<P>
SAM has two modes of operation, indicated by the prompt "C64>" or "1541>".
You can switch between them with the "64" and "1541" commands. In "C64"
mode, all commands that access memory or the CPU operate on the memory/CPU
of the emulated C64. In "1541" mode, they operate on the emulated 1541
(this is only useful if the processor-level 1541 emulation is turned
on).<P>
All commands that access the C64 memory use the memory configuration set
with the "k" command. On starting up SAM, the configuration is set to the
one the processor is in. Accesses from within SAM have the same effect as
accesses of the emulated processor. This affects especially the I/O
registers: a memory dump of $dc00-$de00 clears pending CIA interrupts as
SAM reads from $dc0d and $dd0d. With the "v" commands, you can examine the
state of the I/O chips without modifying the state of the emulation.<P>
In all places where SAM expects a number (except in the assembler) you can
also enter an expression of hex numbers containing '+', '-', '*', '/' and
parens. Commands that create a longer output can be interrupted with
Ctrl-C.<P>
Here is a description of all commands ('[]' marks a parameter than can be
left out, '{}' marks a parameter that can be repeated many times. If a
[start] parameter is left out, SAM continues at the address where the last
command stopped):<P>
<PRE>
a [start] Assemble
</PRE><P>
starts the assembler at the address "start". SAM always prints the address
where the next instruction will be written to. The syntax of the
instructions conforms to the standard except for shift/rotation
instructions in the "accumulator" addressing mode. Those have to be entered
without operand, e.g. "lsr" instead of "lsr a". Entering a blank line quits
the assembler and returns to the command mode of SAM.<P>
<PRE>
b [start] [end] Binary dump
</PRE><P>
displays the memory from "start" to "end" byte-wise binary. With this
command, you can view character sets.<P>
<PRE>
c start end dest Compare memory
</PRE><P>
compares the memory in the range from "start" to (and including) "end"
with the memory at "dest". The addresses of all different bytes and the
total number of differences (decimal) are printed.<P>
<PRE>
d [start] [end] Disassemble
</PRE><P>
disassembles the memory from "start" to "end". Undocumented opcodes are
markes with a star '*'.<P>
<PRE>
e Show interrupt vectors
</PRE><P>
shows the currently active interrupt vectors of the 6510 (C64) or 6502
(1541) and (in C64 mode, if the Kernal ROM is mapped in) of the Kernal.<P>
<PRE>
f start end byte Fill memory
</PRE><P>
fills the memory in the range from "start" to (and including) "end" with
the value "byte".<P>
<PRE>
i [start] [end] ASCII/PETSCII dump
</PRE><P>
shows the memory from "start" to "end" as ASCII/PETSCII characters.<P>
<PRE>
k [config] Show/set C64 memory configuration
</PRE><P>
"k" without parameters shows the memory configuration that is set for SAM,
"k" with parameter modifies it. On exiting SAM, the configuration set with
the processor port is reactivated. The memory configuration has no effect
in 1541 mode. The 8 possible configurations are:
<PRE>
# $a000-$bfff $d000-$dfff $e000-$ffff
----------------------------------------
0 RAM RAM RAM
1 RAM Char ROM RAM
2 RAM Char ROM Kernal ROM
3 Basic ROM Char ROM Kernal ROM
4 RAM RAM RAM
5 RAM I/O RAM
6 RAM I/O Kernal ROM
7 Basic ROM I/O Kernal ROM
</PRE>
<PRE>
l start "file" Load data
</PRE><P>
loads the contents of the specified file into memory starting from address
"start". The file name must be enclosed in quotation marks even if it
contains no spaces. This command cannot be used to load C64 programs as
it doesn't respect the embedded load address in the programs.<P>
<PRE>
m [start] [end] Memory dump
</PRE><P>
displays the memory from "start" to "end" as hexadecimal numbers and ASCII
characters.<P>
<PRE>
n [start] [end] Screen code dump
</PRE><P>
displays the memory from "start" to "end" as ASCII characters, interpreting
each byte as a screen code of the standard character set.<P>
<PRE>
o ["file"] Redirect output
</PRE><P>
When a file name is specified, all following output is redirected to this
file. The file name must be enclosed in quotation marks even if it contains
no spaces. Entering "o" without parameters closes the file and directs the
output into the window of SAM again.<P>
<PRE>
p [start] [end] Sprite dump
</PRE><P>
displays the memory from "start" to "end" binary with three bytes per line.
With this command, you can display sprite data.<P>
<PRE>
r [reg value] Show/set CPU registers
</PRE><P>
"r" without parameters shows all 6510 (C64) or 6502 (1541) registers and
flags and the instruction at the address specified by the program counter.
For the 6510, "DR" and "PR" are the data direction register and data
register of the processor port. To modify a register, give its name ("reg")
and the new value ("value") as parameters.<P>
<PRE>
s start end "file" Save data
</PRE><P>
writes the memory from "start" to (and including) "end" to the specified
file. The file name must be enclosed in quotation marks even if it contains
no spaces. This command cannot be used to save C64 programs as it doesn't
save a load address in the file.<P>
<PRE>
t start end dest Transfer memory
</PRE><P>
transfers the memory from "start" to (and including) "end" to "dest".
Source and destination may overlap.<P>
<PRE>
vc1 View CIA 1 state
</PRE><P>
shows the state of CIA 1 ($dc00).<P>
<PRE>
vc2 View CIA 2 state
</PRE><P>
shows the state of CIA 2 ($dd00).<P>
<PRE>
vf View floppy state
</PRE><P>
shows the state of the processor-level 1541 emulation.<P>
<PRE>
vs View SID state
</PRE><P>
shows the state of the SID.<P>
<PRE>
vv View VIC state
</PRE><P>
shows the state of the VIC.<P>
<PRE>
x Return to Frodo
</PRE><P>
quits SAM and returns to Frodo.<P>
<PRE>
: addr {byte} Modify memory
</PRE><P>
writes the space-separated values "byte" into memory starting at "addr".<P>
<PRE>
1541 Switch to 1541 mode
</PRE><P>
switches to 1541 mode. All commands that access memory or the CPU will then
operate on the emulated 1541 (processor-level).<P>
<PRE>
64 Switch to C64 mode
</PRE><P>
switches to C64 mode. All commands that access memory or the CPU will then
operate on the emulated C64.<P>
<PRE>
? expression Calculate expression
</PRE><P>
calculates the value of the given expression and displays it in decimal
and hexadecimal.<P>
</BODY>
</HTML>