homebrew_launcher/installer/kernel_patches.S
2016-02-29 22:28:18 +01:00

208 lines
5.1 KiB
ArmAsm

#if ((VER == 532) || (VER == 540))
#define BAT_SETUP_HOOK_ADDR 0xFFF1D638
# not all of those NOP address are required for every firmware
# mainly these should stop the kernel from removing our IBAT4 and DBAT5
#define BAT_SET_NOP_ADDR_1 0xFFF06A14
#define BAT_SET_NOP_ADDR_2 0xFFF06AA0
#define BAT_SET_NOP_ADDR_3 0xFFF003C8
#define BAT_SET_NOP_ADDR_4 0xFFF003CC
#define BAT_SET_NOP_ADDR_5 0xFFF1D720
#define BAT_SET_NOP_ADDR_6 0xFFF1D73C
#define BAT_SET_NOP_ADDR_7 0xFFF1D840
#define BAT_SET_NOP_ADDR_8 0xFFEE10B8
#define BAT_SET_NOP_ADDR_9 0xFFEE10BC
#elif ((VER == 500) || (VER == 510))
#define BAT_SETUP_HOOK_ADDR 0xFFF1D518
#elif ( (VER == 400) || (VER == 410) )
#define BAT_SETUP_HOOK_ADDR 0xFFF1AD00
#else
#error Please define valid values for kernel setup.
#endif
#ifdef USE_SD_LOADER
#define BAT_SETUP_HOOK_ENTRY 0x00800000
#else
#define BAT_SETUP_HOOK_ENTRY (0x00800000 + 0x2000)
#endif
#define BAT4U_VAL 0x008000FF
#define BAT4L_VAL 0x30800012
#define SET_R4_TO_ADDR(addr) \
lis r3, addr@h ; \
ori r3, r3, addr@l ; \
stw r4, 0(r3) ; \
dcbf 0, r3 ; \
icbi 0, r3 ;
.globl Syscall_0x36
Syscall_0x36:
mflr r0
stwu r1, -0x10(r1)
stw r30, 0x4(r1)
stw r31, 0x8(r1)
mr r5, r0
mr r6, r1
li r0, 0x3600
sc
nop
mr r0, r5
mr r1, r6
lwz r30, 0x04(r1)
lwz r31, 0x08(r1)
addi r1, r1, 0x10
mtlr r0
blr
.globl KernelPatches
KernelPatches:
# store the old DBAT0
mfdbatu r30, 0
mfdbatl r31, 0
# memory barrier
eieio
isync
# setup DBAT0 for access to kernel code memory
lis r3, 0xFFF0
ori r3, r3, 0x0002
mtdbatu 0, r3
lis r3, 0xFFF0
ori r3, r3, 0x0032
mtdbatl 0, r3
# memory barrier
eieio
isync
# SaveAndResetDataBATs_And_SRs hook setup, but could be any BAT function though
# just chosen because its simple
lis r3, BAT_SETUP_HOOK_ADDR@h
ori r3, r3, BAT_SETUP_HOOK_ADDR@l
# make the kernel setup our section in IBAT4 and
# jump to our function to restore the replaced instructions
lis r4, 0x3ce0 # lis r7, BAT4L_VAL@h
ori r4, r4, BAT4L_VAL@h
stw r4, 0x00(r3)
lis r4, 0x60e7 # ori r7, r7, BAT4L_VAL@l
ori r4, r4, BAT4L_VAL@l
stw r4, 0x04(r3)
lis r4, 0x7cf1 # mtspr 561, r7
ori r4, r4, 0x8ba6
stw r4, 0x08(r3)
lis r4, 0x3ce0 # lis r7, BAT4U_VAL@h
ori r4, r4, BAT4U_VAL@h
stw r4, 0x0C(r3)
lis r4, 0x60e7 # ori r7, r7, BAT4U_VAL@l
ori r4, r4, BAT4U_VAL@l
stw r4, 0x10(r3)
lis r4, 0x7cf0 # mtspr 560, r7
ori r4, r4, 0x8ba6
stw r4, 0x14(r3)
lis r4, 0x7c00 # eieio
ori r4, r4, 0x06ac
stw r4, 0x18(r3)
lis r4, 0x4c00 # isync
ori r4, r4, 0x012c
stw r4, 0x1C(r3)
lis r4, 0x7ce8 # mflr r7
ori r4, r4, 0x02a6
stw r4, 0x20(r3)
lis r4, (BAT_SETUP_HOOK_ENTRY | 0x48000003)@h # bla BAT_SETUP_HOOK_ENTRY
ori r4, r4, (BAT_SETUP_HOOK_ENTRY | 0x48000003)@l
stw r4, 0x24(r3)
# flush and invalidate the replaced instructions
lis r3, (BAT_SETUP_HOOK_ADDR & ~31)@h
ori r3, r3, (BAT_SETUP_HOOK_ADDR & ~31)@l
dcbf 0, r3
icbi 0, r3
lis r3, ((BAT_SETUP_HOOK_ADDR + 0x20) & ~31)@h
ori r3, r3, ((BAT_SETUP_HOOK_ADDR + 0x20) & ~31)@l
dcbf 0, r3
icbi 0, r3
sync
# setup IBAT4 for core 1 at this position (not really required but wont hurt)
# IBATL 4
lis r3, BAT4L_VAL@h
ori r3, r3, BAT4L_VAL@l
mtspr 561, r3
# IBATU 4
lis r3, BAT4U_VAL@h
ori r3, r3, BAT4U_VAL@l
mtspr 560, r3
# memory barrier
eieio
isync
# write "nop" to some positions
lis r4, 0x6000
# nop on IBATU 4 and DBAT 5 set/reset
#ifdef BAT_SET_NOP_ADDR_1
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_1)
#endif
#ifdef BAT_SET_NOP_ADDR_2
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_2)
#endif
#ifdef BAT_SET_NOP_ADDR_3
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_3)
#endif
#ifdef BAT_SET_NOP_ADDR_4
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_4)
#endif
#ifdef BAT_SET_NOP_ADDR_5
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_5)
#endif
#ifdef BAT_SET_NOP_ADDR_6
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_6)
#endif
#ifdef BAT_SET_NOP_ADDR_7
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_7)
#endif
#if (defined(BAT_SET_NOP_ADDR_8) && defined(BAT_SET_NOP_ADDR_9))
# memory barrier
eieio
isync
# setup DBAT0 for access to kernel code memory
lis r3, 0xFFEE
ori r3, r3, 0x0002
mtdbatu 0, r3
lis r3, 0xFFEE
ori r3, r3, 0x0032
mtdbatl 0, r3
# memory barrier
eieio
isync
# write "nop" to some positions
lis r4, 0x6000
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_8)
SET_R4_TO_ADDR(BAT_SET_NOP_ADDR_9)
#endif
# memory barrier
eieio
isync
# restore DBAT 0 and return from interrupt
mtdbatu 0, r30
mtdbatl 0, r31
# memory barrier
eieio
isync
rfi