Changed _CF_USE_DMA and _CF_ALLOW_UNALIGNED to _IO_USE_DMA and _IO_ALLOW_UNALIGNED respectively.

Combined all CF-based hardware drivers into one set of routines with different sets of registers. Speed should remain the same, but size should be reduced.
This commit is contained in:
Michael Chisholm 2006-07-16 06:18:23 +00:00
parent 6b6d0f51c0
commit 3a9b3b5e3a
9 changed files with 481 additions and 891 deletions

View File

@ -27,6 +27,10 @@
2006-07-11 - Chishm
* Original release
2006-07-16 - Chishm
* Renamed _CF_USE_DMA to _IO_USE_DMA
* Renamed _CF_ALLOW_UNALIGNED to _IO_ALLOW_UNALIGNED
*/
#ifndef _DISC_IO_H
@ -38,14 +42,14 @@
// Customisable features
// Use DMA to read the card, remove this line to use normal reads/writes
// #define _CF_USE_DMA
// #define _IO_USE_DMA
// Allow buffers not alligned to 16 bits when reading files.
// Note that this will slow down access speed, so only use if you have to.
// It is also incompatible with DMA
#define _CF_ALLOW_UNALIGNED
#define _IO_ALLOW_UNALIGNED
#if defined _CF_USE_DMA && defined _CF_ALLOW_UNALIGNED
#if defined _IO_USE_DMA && defined _IO_ALLOW_UNALIGNED
#error You can't use both DMA and unaligned memory
#endif

View File

@ -0,0 +1,322 @@
/*
io_cf_common.c based on
compact_flash.c
By chishm (Michael Chisholm)
Common hardware routines for using a compact flash card. This is not reentrant
and does not do range checking on the supplied addresses. This is designed to
be as fast as possible.
CF routines modified with help from Darkfader
Copyright (c) 2006 Michael "Chishm" Chisholm
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "io_cf_common.h"
//---------------------------------------------------------------
// DMA
#ifdef _IO_USE_DMA
#ifndef NDS
#include "gba_dma.h"
#else
#include <nds/dma.h>
#ifdef ARM9
#include <nds/arm9/cache.h>
#endif
#endif
#endif
//---------------------------------------------------------------
// CF Addresses & Commands
CF_REGISTERS cfRegisters = {0};
/*-----------------------------------------------------------------
_CF_isInserted
Is a compact flash card inserted?
bool return OUT: true if a CF card is inserted
-----------------------------------------------------------------*/
bool _CF_isInserted (void) {
// Change register, then check if value did change
*(cfRegisters.status) = CF_STS_INSERTED;
return ((*(cfRegisters.status) & 0xff) == CF_STS_INSERTED);
}
/*-----------------------------------------------------------------
_CF_clearStatus
Tries to make the CF card go back to idle mode
bool return OUT: true if a CF card is idle
-----------------------------------------------------------------*/
bool _CF_clearStatus (void) {
int i;
// Wait until CF card is finished previous commands
i=0;
while ((*(cfRegisters.command) & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT)) {
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(*(cfRegisters.status) & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT)) {
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
return true;
}
/*-----------------------------------------------------------------
_CF_readSectors
Read 512 byte sector numbered "sector" into "buffer"
u32 sector IN: address of first 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer OUT: pointer to 512 byte buffer to store data in
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _CF_readSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _IO_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if (defined _IO_USE_DMA) && (defined NDS) && (defined ARM9)
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((*(cfRegisters.command) & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT)) {
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(*(cfRegisters.status) & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT)) {
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to read
*(cfRegisters.sectorCount) = (numSectors < 256 ? numSectors : 0); // Read a maximum of 256 sectors, 0 means 256
// Set read sector
*(cfRegisters.lba1) = sector & 0xFF; // 1st byte of sector number
*(cfRegisters.lba2) = (sector >> 8) & 0xFF; // 2nd byte of sector number
*(cfRegisters.lba3) = (sector >> 16) & 0xFF; // 3rd byte of sector number
*(cfRegisters.lba4) = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to read
*(cfRegisters.command) = CF_CMD_READ;
while (numSectors--)
{
// Wait until card is ready for reading
i = 0;
while (((*(cfRegisters.status) & 0xff)!= CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Read data
#ifdef _IO_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)(cfRegisters.data);
DMA3_DEST = (u32)buff;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_SRC_FIX;
#else
DMA3COPY ( (cfRegisters.data), buff, 256 | DMA16 | DMA_ENABLE | DMA_SRC_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _IO_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *(cfRegisters.data);
*buff_u8++ = temp & 0xFF;
*buff_u8++ = temp >> 8;
}
} else {
while(i--)
*buff++ = *(cfRegisters.data);
}
#else
i=256;
while(i--)
*buff++ = *(cfRegisters.data);
#endif
}
#if (defined _IO_USE_DMA) && (defined NDS)
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_CF_writeSectors
Write 512 byte sector numbered "sector" from "buffer"
u32 sector IN: address of 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer IN: pointer to 512 byte buffer to read data from
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _CF_writeSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _IO_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if defined _IO_USE_DMA && defined NDS && defined ARM9
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((*(cfRegisters.command) & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(*(cfRegisters.status) & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to write
*(cfRegisters.sectorCount) = (numSectors < 256 ? numSectors : 0); // Write a maximum of 256 sectors, 0 means 256
// Set write sector
*(cfRegisters.lba1) = sector & 0xFF; // 1st byte of sector number
*(cfRegisters.lba2) = (sector >> 8) & 0xFF; // 2nd byte of sector number
*(cfRegisters.lba3) = (sector >> 16) & 0xFF; // 3rd byte of sector number
*(cfRegisters.lba4) = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to write
*(cfRegisters.command) = CF_CMD_WRITE;
while (numSectors--)
{
// Wait until card is ready for writing
i = 0;
while (((*(cfRegisters.status) & 0xff) != CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Write data
#ifdef _IO_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)buff;
DMA3_DEST = (u32)(cfRegisters.data);
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_DST_FIX;
#else
DMA3COPY( buff, (cfRegisters.data), 256 | DMA16 | DMA_ENABLE | DMA_DST_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _IO_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *buff_u8++;
temp |= *buff_u8++ << 8;
*(cfRegisters.data) = temp;
}
} else {
while(i--)
*(cfRegisters.data) = *buff++;
}
#else
i=256;
while(i--)
*(cfRegisters.data) = *buff++;
#endif
}
#if defined _IO_USE_DMA && defined NDS
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_CF_shutdown
shutdown the CF interface
-----------------------------------------------------------------*/
bool _CF_shutdown(void) {
return _CF_clearStatus() ;
}
/*-----------------------------------------------------------------
_CF_startUp
Initializes the CF interface using the supplied registers
returns true if successful, otherwise returns false
-----------------------------------------------------------------*/
bool _CF_startup(const CF_REGISTERS *usableCfRegs) {
cfRegisters = *usableCfRegs;
// See if there is a read/write register
u16 temp = *(cfRegisters.lba1);
*(cfRegisters.lba1) = (~temp & 0xFF);
temp = (~temp & 0xFF);
if (!(*(cfRegisters.lba1) == temp)) {
return false;
}
// Make sure it is 8 bit
*(cfRegisters.lba1) = 0xAA55;
if (*(cfRegisters.lba1) == 0xAA55) {
return false;
}
return true;
}

View File

@ -30,6 +30,9 @@
2006-07-11 - Chishm
* Original release
2006-07-16 - Chishm
* Combined all CF interfaces into one common set of routines
*/
#ifndef IO_CF_COMMON_H
@ -37,6 +40,19 @@
#include "disc_io.h"
typedef struct {
vu16* data;
vu16* status;
vu16* command;
vu16* error;
vu16* sectorCount;
vu16* lba1;
vu16* lba2;
vu16* lba3;
vu16* lba4;
} CF_REGISTERS;
// CF Card status
#define CF_STS_INSERTED 0x50
#define CF_STS_REMOVED 0x00
@ -52,4 +68,11 @@
#define CF_CARD_TIMEOUT 10000000
bool _CF_isInserted (void);
bool _CF_clearStatus (void);
bool _CF_readSectors (u32 sector, u32 numSectors, void* buffer);
bool _CF_writeSectors (u32 sector, u32 numSectors, void* buffer);
bool _CF_shutdown(void);
bool _CF_startup(const CF_REGISTERS *usableCfRegs);
#endif // define IO_CF_COMMON_H

View File

@ -195,7 +195,7 @@ bool _EFA2_readSectors (u32 sector, u32 numSecs, void* buffer)
{
int i;
#ifndef _CF_ALLOW_UNALIGNED
#ifndef _IO_ALLOW_UNALIGNED
u8 byte;
u16 word;
#endif
@ -234,7 +234,7 @@ bool _EFA2_readSectors (u32 sector, u32 numSecs, void* buffer)
while (numSecs--)
{
// read page data
#ifdef _CF_ALLOW_UNALIGNED
#ifdef _IO_ALLOW_UNALIGNED
// slow byte access to RAM, but works in principle
for (i=0 ; i < 512 ; i++)
((u8*)buffer)[i] = REG_EFA2_NAND_RD;

View File

@ -41,7 +41,7 @@
//---------------------------------------------------------------
// DMA
#ifdef _CF_USE_DMA
#ifdef _IO_USE_DMA
#ifndef NDS
#include "gba_dma.h"
#else
@ -155,7 +155,7 @@ bool _FCSR_readSectors (u32 sector, u32 numSectors, void* buffer)
}
} else { // Reading from Cart ROM
#ifdef _CF_USE_DMA
#ifdef _IO_USE_DMA
#ifdef NDS
#ifdef ARM9
DC_FlushRange( buffer, readLength);
@ -166,9 +166,9 @@ bool _FCSR_readSectors (u32 sector, u32 numSectors, void* buffer)
#else // ! NDS
DMA3COPY ( src, buffer, (readLength >> 1) | DMA16 | DMA_ENABLE);
#endif // NDS
#else // !_CF_USE_DMA
#else // !_IO_USE_DMA
memcpy (buffer, src, readLength);
#endif // _CF_USE_DMA
#endif // _IO_USE_DMA
} // if (flagSramSector)

View File

@ -40,7 +40,7 @@
//---------------------------------------------------------------
// DMA
#ifdef _CF_USE_DMA
#ifdef _IO_USE_DMA
#ifndef NDS
#include "gba_dma.h"
#else
@ -52,303 +52,45 @@
#endif
//---------------------------------------------------------------
// CF Addresses & Commands
// M3 CF Addresses
#define REG_M3CF_STS (*(vu16*)0x080C0000) // Status of the CF Card / Device control
#define REG_M3CF_CMD (*(vu16*)0x088E0000) // Commands sent to control chip and status return
#define REG_M3CF_ERR (*(vu16*)0x08820000) // Errors / Features
#define REG_M3CF_STS ((vu16*)0x080C0000) // Status of the CF Card / Device control
#define REG_M3CF_CMD ((vu16*)0x088E0000) // Commands sent to control chip and status return
#define REG_M3CF_ERR ((vu16*)0x08820000) // Errors / Features
#define REG_M3CF_SEC (*(vu16*)0x08840000) // Number of sector to transfer
#define REG_M3CF_LBA1 (*(vu16*)0x08860000) // 1st byte of sector address
#define REG_M3CF_LBA2 (*(vu16*)0x08880000) // 2nd byte of sector address
#define REG_M3CF_LBA3 (*(vu16*)0x088A0000) // 3rd byte of sector address
#define REG_M3CF_LBA4 (*(vu16*)0x088C0000) // last nibble of sector address | 0xE0
#define REG_M3CF_SEC ((vu16*)0x08840000) // Number of sector to transfer
#define REG_M3CF_LBA1 ((vu16*)0x08860000) // 1st byte of sector address
#define REG_M3CF_LBA2 ((vu16*)0x08880000) // 2nd byte of sector address
#define REG_M3CF_LBA3 ((vu16*)0x088A0000) // 3rd byte of sector address
#define REG_M3CF_LBA4 ((vu16*)0x088C0000) // last nibble of sector address | 0xE0
#define M3_DATA ((vu16*)0x08800000) // Pointer to buffer of CF data transered from card
#define REG_M3CF_DATA ((vu16*)0x08800000) // Pointer to buffer of CF data transered from card
static const CF_REGISTERS _M3CF_Registers = {
REG_M3CF_DATA,
REG_M3CF_STS,
REG_M3CF_CMD,
REG_M3CF_ERR,
REG_M3CF_SEC,
REG_M3CF_LBA1,
REG_M3CF_LBA2,
REG_M3CF_LBA3,
REG_M3CF_LBA4
};
/*-----------------------------------------------------------------
_M3CF_isInserted
Is a compact flash card inserted?
bool return OUT: true if a CF card is inserted
-----------------------------------------------------------------*/
bool _M3CF_isInserted (void)
{
// Change register, then check if value did change
REG_M3CF_STS = CF_STS_INSERTED;
return ((REG_M3CF_STS & 0xff) == CF_STS_INSERTED);
}
/*-----------------------------------------------------------------
_M3CF_clearStatus
Tries to make the CF card go back to idle mode
bool return OUT: true if a CF card is idle
-----------------------------------------------------------------*/
bool _M3CF_clearStatus (void)
{
int i;
// Wait until CF card is finished previous commands
i=0;
while ((REG_M3CF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_M3CF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
return true;
}
/*-----------------------------------------------------------------
_M3CF_readSectors
Read 512 byte sector numbered "sector" into "buffer"
u32 sector IN: address of first 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer OUT: pointer to 512 byte buffer to store data in
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _M3CF_readSectors (u32 sector, u32 numSectors, void* buffer)
{
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if defined _CF_USE_DMA && defined NDS && defined ARM9
DC_FlushRange( buffer, numSectors * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_M3CF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_M3CF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to read
REG_M3CF_SEC = (numSectors < 256 ? numSectors : 0); // Read a maximum of 256 sectors, 0 means 256
// Set read sector
REG_M3CF_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_M3CF_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_M3CF_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_M3CF_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to read
REG_M3CF_CMD = CF_CMD_READ;
while (numSectors--)
{
// Wait until card is ready for reading
i = 0;
while (((REG_M3CF_STS & 0xff) != CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Read data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)M3_DATA;
DMA3_DEST = (u32)buff;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_SRC_FIX;
#else
DMA3COPY ( M3_DATA, buff, 256 | DMA16 | DMA_ENABLE | DMA_SRC_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *M3_DATA;
*buff_u8++ = temp & 0xFF;
*buff_u8++ = temp >> 8;
}
} else {
while(i--)
*buff++ = *M3_DATA;
}
#else
i=256;
while(i--)
*buff++ = *M3_DATA;
#endif
}
#if defined _CF_USE_DMA && defined NDS
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_M3CF_writeSectors
Write 512 byte sector numbered "sector" from "buffer"
u32 sector IN: address of 512 byte sector on CF card to read
u32 numSecs IN: number of 512 byte sectors to read,
1 to 256 sectors can be read, 0 = 256
void* buffer IN: pointer to 512 byte buffer to read data from
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _M3CF_writeSectors (u32 sector, u32 numSectors, void* buffer)
{
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if defined _CF_USE_DMA && defined NDS && defined ARM9
DC_FlushRange( buffer, numSectors * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_M3CF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_M3CF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to write
REG_M3CF_SEC = (numSectors < 256 ? numSectors : 0); // Max of 256, 0 means 256
// Set write sector
REG_M3CF_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_M3CF_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_M3CF_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_M3CF_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to write
REG_M3CF_CMD = CF_CMD_WRITE;
while (numSectors--)
{
// Wait until card is ready for writing
i = 0;
while (((REG_M3CF_STS & 0xff) != CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Write data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)buff;
DMA3_DEST = (u32)M3_DATA;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_DST_FIX;
#else
DMA3COPY( buff, M3_DATA, 256 | DMA16 | DMA_ENABLE | DMA_DST_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *buff_u8++;
temp |= *buff_u8++ << 8;
*M3_DATA = temp;
}
} else {
while(i--)
*M3_DATA = *buff++;
}
#else
i=256;
while(i--)
*M3_DATA = *buff++;
#endif
}
#if defined _CF_USE_DMA && defined NDS
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
M3_Unlock
Returns true if M3 was unlocked, false if failed
Added by MightyMax
-----------------------------------------------------------------*/
static bool _M3CF_unlock(void)
{
u16 temp;
bool _M3CF_startup(void) {
_M3_changeMode (M3_MODE_MEDIA);
// test that we have register access
temp = REG_M3CF_LBA1;
temp = (~temp & 0xFF);
REG_M3CF_LBA1 = temp;
// did it change?
return (REG_M3CF_LBA1 == temp) ;
}
bool _M3CF_shutdown(void) {
if ( !_M3CF_clearStatus() ) {
return false;
}
_M3_changeMode (M3_MODE_ROM);
return true;
}
bool _M3CF_startUp(void) {
return _M3CF_unlock() ;
return _CF_startup (&_M3CF_Registers);
}
IO_INTERFACE _io_m3cf = {
DEVICE_TYPE_M3CF,
FEATURE_MEDIUM_CANREAD | FEATURE_MEDIUM_CANWRITE | FEATURE_SLOT_GBA,
(FN_MEDIUM_STARTUP)&_M3CF_startUp,
(FN_MEDIUM_ISINSERTED)&_M3CF_isInserted,
(FN_MEDIUM_READSECTORS)&_M3CF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_M3CF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_M3CF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_M3CF_shutdown
(FN_MEDIUM_STARTUP)&_M3CF_startup,
(FN_MEDIUM_ISINSERTED)&_CF_isInserted,
(FN_MEDIUM_READSECTORS)&_CF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_CF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_CF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_CF_shutdown
} ;

View File

@ -39,7 +39,7 @@
//---------------------------------------------------------------
// DMA
#ifdef _CF_USE_DMA
#ifdef _IO_USE_DMA
#ifndef NDS
#include "gba_dma.h"
#else
@ -51,288 +51,39 @@
#endif
//---------------------------------------------------------------
// CF Addresses & Commands
// Max Media Player CF Addresses
#define REG_MMP_STS (*(vu16*)0x080E0000) // Status of the CF Card / Device control
#define REG_MMP_CMD (*(vu16*)0x080E0000) // Commands sent to control chip and status return
#define REG_MMP_ERR (*(vu16*)0x08020000) // Errors / Features
#define REG_MMCF_STS ((vu16*)0x080E0000) // Status of the CF Card / Device control
#define REG_MMCF_CMD ((vu16*)0x080E0000) // Commands sent to control chip and status return
#define REG_MMCF_ERR ((vu16*)0x08020000) // Errors / Features
#define REG_MMP_SEC (*(vu16*)0x08040000) // Number of sector to transfer
#define REG_MMP_LBA1 (*(vu16*)0x08060000) // 1st byte of sector address
#define REG_MMP_LBA2 (*(vu16*)0x08080000) // 2nd byte of sector address
#define REG_MMP_LBA3 (*(vu16*)0x080A0000) // 3rd byte of sector address
#define REG_MMP_LBA4 (*(vu16*)0x080C0000) // last nibble of sector address | 0xE0
#define REG_MMCF_SEC ((vu16*)0x08040000) // Number of sector to transfer
#define REG_MMCF_LBA1 ((vu16*)0x08060000) // 1st byte of sector address
#define REG_MMCF_LBA2 ((vu16*)0x08080000) // 2nd byte of sector address
#define REG_MMCF_LBA3 ((vu16*)0x080A0000) // 3rd byte of sector address
#define REG_MMCF_LBA4 ((vu16*)0x080C0000) // last nibble of sector address | 0xE0
#define MMP_DATA ((vu16*)0x09000000) // Pointer to buffer of CF data transered from card
#define REG_MMCF_DATA ((vu16*)0x09000000) // Pointer to buffer of CF data transered from card
static const CF_REGISTERS _MMCF_Registers = {
REG_MMCF_DATA,
REG_MMCF_STS,
REG_MMCF_CMD,
REG_MMCF_ERR,
REG_MMCF_SEC,
REG_MMCF_LBA1,
REG_MMCF_LBA2,
REG_MMCF_LBA3,
REG_MMCF_LBA4
};
/*-----------------------------------------------------------------
_MMCF_isInserted
Is a compact flash card inserted?
bool return OUT: true if a CF card is inserted
-----------------------------------------------------------------*/
bool _MMCF_isInserted (void) {
// Change register, then check if value did change
REG_MMP_STS = CF_STS_INSERTED;
return ((REG_MMP_STS & 0xff) == CF_STS_INSERTED);
}
/*-----------------------------------------------------------------
_MMCF_clearStatus
Tries to make the CF card go back to idle mode
bool return OUT: true if a CF card is idle
-----------------------------------------------------------------*/
bool _MMCF_clearStatus (void) {
int i;
// Wait until CF card is finished previous commands
i=0;
while ((REG_MMP_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MMP_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
return true;
}
/*-----------------------------------------------------------------
_MMCF_readSectors
Read 512 byte sector numbered "sector" into "buffer"
u32 sector IN: address of first 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer OUT: pointer to 512 byte buffer to store data in
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _MMCF_readSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if (defined _CF_USE_DMA) && (defined NDS) && (defined ARM9)
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_MMP_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MMP_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to read
REG_MMP_SEC = (numSectors < 256 ? numSectors : 0); // Read a maximum of 256 sectors, 0 means 256
// Set read sector
REG_MMP_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_MMP_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_MMP_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_MMP_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to read
REG_MMP_CMD = CF_CMD_READ;
while (numSectors--)
{
// Wait until card is ready for reading
i = 0;
while (((REG_MMP_STS & 0xff)!= CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Read data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)MMP_DATA;
DMA3_DEST = (u32)buff;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_SRC_FIX;
#else
DMA3COPY ( MMP_DATA, buff, 256 | DMA16 | DMA_ENABLE | DMA_SRC_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *MMP_DATA;
*buff_u8++ = temp & 0xFF;
*buff_u8++ = temp >> 8;
}
} else {
while(i--)
*buff++ = *MMP_DATA;
}
#else
i=256;
while(i--)
*buff++ = *MMP_DATA;
#endif
}
#if (defined _CF_USE_DMA) && (defined NDS)
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_MMCF_writeSectors
Write 512 byte sector numbered "sector" from "buffer"
u32 sector IN: address of 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer IN: pointer to 512 byte buffer to read data from
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _MMCF_writeSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if defined _CF_USE_DMA && defined NDS && defined ARM9
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_MMP_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MMP_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to write
REG_MMP_SEC = (numSectors < 256 ? numSectors : 0); // Write a maximum of 256 sectors, 0 means 256
// Set write sector
REG_MMP_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_MMP_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_MMP_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_MMP_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to write
REG_MMP_CMD = CF_CMD_WRITE;
while (numSectors--)
{
// Wait until card is ready for writing
i = 0;
while (((REG_MMP_STS & 0xff) != CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Write data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)buff;
DMA3_DEST = (u32)MMP_DATA;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_DST_FIX;
#else
DMA3COPY( buff, MMP_DATA, 256 | DMA16 | DMA_ENABLE | DMA_DST_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *buff_u8++;
temp |= *buff_u8++ << 8;
*MMP_DATA = temp;
}
} else {
while(i--)
*MMP_DATA = *buff++;
}
#else
i=256;
while(i--)
*MMP_DATA = *buff++;
#endif
}
#if defined _CF_USE_DMA && defined NDS
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_MMCF_Shutdown
unload the GBAMP CF interface
-----------------------------------------------------------------*/
bool _MMCF_shutdown(void) {
return _MMCF_clearStatus() ;
}
/*-----------------------------------------------------------------
_MMCF_startUp
initializes the CF interface, returns true if successful,
otherwise returns false
-----------------------------------------------------------------*/
bool _MMCF_startUp(void) {
// See if there is a read/write register
u16 temp = REG_MMP_LBA1;
REG_MMP_LBA1 = (~temp & 0xFF);
temp = (~temp & 0xFF);
if (!(REG_MMP_LBA1 == temp)) {
return false;
}
// Make sure it is 8 bit
REG_MMP_LBA1 = 0xAA55;
if (REG_MMP_LBA1 == 0xAA55) {
return false;
}
return true;
bool _MMCF_startup(void) {
return _CF_startup (&_MMCF_Registers);
}
/*-----------------------------------------------------------------
@ -341,10 +92,10 @@ the actual interface structure
IO_INTERFACE _io_mmcf = {
DEVICE_TYPE_MMCF,
FEATURE_MEDIUM_CANREAD | FEATURE_MEDIUM_CANWRITE | FEATURE_SLOT_GBA,
(FN_MEDIUM_STARTUP)&_MMCF_startUp,
(FN_MEDIUM_ISINSERTED)&_MMCF_isInserted,
(FN_MEDIUM_READSECTORS)&_MMCF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_MMCF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_MMCF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_MMCF_shutdown
(FN_MEDIUM_STARTUP)&_MMCF_startup,
(FN_MEDIUM_ISINSERTED)&_CF_isInserted,
(FN_MEDIUM_READSECTORS)&_CF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_CF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_CF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_CF_shutdown
} ;

View File

@ -39,7 +39,7 @@
//---------------------------------------------------------------
// DMA
#ifdef _CF_USE_DMA
#ifdef _IO_USE_DMA
#ifndef NDS
#include "gba_dma.h"
#else
@ -51,286 +51,38 @@
#endif
//---------------------------------------------------------------
// CF Addresses & Commands
// GBAMP CF Addresses
#define REG_MPCF_STS (*(vu16*)0x098C0000) // Status of the CF Card / Device control
#define REG_MPCF_CMD (*(vu16*)0x090E0000) // Commands sent to control chip and status return
#define REG_MPCF_ERR (*(vu16*)0x09020000) // Errors / Features
#define REG_MPCF_STS ((vu16*)0x098C0000) // Status of the CF Card / Device control
#define REG_MPCF_CMD ((vu16*)0x090E0000) // Commands sent to control chip and status return
#define REG_MPCF_ERR ((vu16*)0x09020000) // Errors / Features
#define REG_MPCF_SEC (*(vu16*)0x09040000) // Number of sector to transfer
#define REG_MPCF_LBA1 (*(vu16*)0x09060000) // 1st byte of sector address
#define REG_MPCF_LBA2 (*(vu16*)0x09080000) // 2nd byte of sector address
#define REG_MPCF_LBA3 (*(vu16*)0x090A0000) // 3rd byte of sector address
#define REG_MPCF_LBA4 (*(vu16*)0x090C0000) // last nibble of sector address | 0xE0
#define MP_DATA ((vu16*)0x09000000) // Pointer to buffer of CF data transered from card
#define REG_MPCF_SEC ((vu16*)0x09040000) // Number of sector to transfer
#define REG_MPCF_LBA1 ((vu16*)0x09060000) // 1st byte of sector address
#define REG_MPCF_LBA2 ((vu16*)0x09080000) // 2nd byte of sector address
#define REG_MPCF_LBA3 ((vu16*)0x090A0000) // 3rd byte of sector address
#define REG_MPCF_LBA4 ((vu16*)0x090C0000) // last nibble of sector address | 0xE0
#define REG_MPCF_DATA ((vu16*)0x09000000) // Pointer to buffer of CF data transered from card
static const CF_REGISTERS _MPCF_Registers = {
REG_MPCF_DATA,
REG_MPCF_STS,
REG_MPCF_CMD,
REG_MPCF_ERR,
REG_MPCF_SEC,
REG_MPCF_LBA1,
REG_MPCF_LBA2,
REG_MPCF_LBA3,
REG_MPCF_LBA4
};
/*-----------------------------------------------------------------
_MPCF_isInserted
Is a compact flash card inserted?
bool return OUT: true if a CF card is inserted
-----------------------------------------------------------------*/
bool _MPCF_isInserted (void) {
// Change register, then check if value did change
REG_MPCF_STS = CF_STS_INSERTED;
return ((REG_MPCF_STS & 0xff) == CF_STS_INSERTED);
}
/*-----------------------------------------------------------------
_MPCF_clearStatus
Tries to make the CF card go back to idle mode
bool return OUT: true if a CF card is idle
-----------------------------------------------------------------*/
bool _MPCF_clearStatus (void) {
int i;
// Wait until CF card is finished previous commands
i=0;
while ((REG_MPCF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MPCF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
return true;
}
/*-----------------------------------------------------------------
_MPCF_readSectors
Read 512 byte sector numbered "sector" into "buffer"
u32 sector IN: address of first 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer OUT: pointer to 512 byte buffer to store data in
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _MPCF_readSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if (defined _CF_USE_DMA) && (defined NDS) && (defined ARM9)
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_MPCF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT)) {
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MPCF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT)) {
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to read
REG_MPCF_SEC = (numSectors < 256 ? numSectors : 0); // Read a maximum of 256 sectors, 0 means 256
// Set read sector
REG_MPCF_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_MPCF_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_MPCF_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_MPCF_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to read
REG_MPCF_CMD = CF_CMD_READ;
while (numSectors--)
{
// Wait until card is ready for reading
i = 0;
while (((REG_MPCF_STS & 0xff)!= CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Read data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)MP_DATA;
DMA3_DEST = (u32)buff;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_SRC_FIX;
#else
DMA3COPY ( MP_DATA, buff, 256 | DMA16 | DMA_ENABLE | DMA_SRC_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *MP_DATA;
*buff_u8++ = temp & 0xFF;
*buff_u8++ = temp >> 8;
}
} else {
while(i--)
*buff++ = *MP_DATA;
}
#else
i=256;
while(i--)
*buff++ = *MP_DATA;
#endif
}
#if (defined _CF_USE_DMA) && (defined NDS)
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_MPCF_writeSectors
Write 512 byte sector numbered "sector" from "buffer"
u32 sector IN: address of 512 byte sector on CF card to read
u32 numSectors IN: number of 512 byte sectors to read,
1 to 256 sectors can be read
void* buffer IN: pointer to 512 byte buffer to read data from
bool return OUT: true if successful
-----------------------------------------------------------------*/
bool _MPCF_writeSectors (u32 sector, u32 numSectors, void* buffer) {
int i;
u16 *buff = (u16*)buffer;
#ifdef _CF_ALLOW_UNALIGNED
u8 *buff_u8 = (u8*)buffer;
int temp;
#endif
#if defined _CF_USE_DMA && defined NDS && defined ARM9
DC_FlushRange( buffer, j * BYTES_PER_READ);
#endif
// Wait until CF card is finished previous commands
i=0;
while ((REG_MPCF_CMD & CF_STS_BUSY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
// Wait until card is ready for commands
i = 0;
while ((!(REG_MPCF_STS & CF_STS_INSERTED)) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Set number of sectors to write
REG_MPCF_SEC = (numSectors < 256 ? numSectors : 0); // Write a maximum of 256 sectors, 0 means 256
// Set write sector
REG_MPCF_LBA1 = sector & 0xFF; // 1st byte of sector number
REG_MPCF_LBA2 = (sector >> 8) & 0xFF; // 2nd byte of sector number
REG_MPCF_LBA3 = (sector >> 16) & 0xFF; // 3rd byte of sector number
REG_MPCF_LBA4 = ((sector >> 24) & 0x0F )| CF_CMD_LBA; // last nibble of sector number
// Set command to write
REG_MPCF_CMD = CF_CMD_WRITE;
while (numSectors--)
{
// Wait until card is ready for writing
i = 0;
while (((REG_MPCF_STS & 0xff) != CF_STS_READY) && (i < CF_CARD_TIMEOUT))
{
i++;
}
if (i >= CF_CARD_TIMEOUT)
return false;
// Write data
#ifdef _CF_USE_DMA
#ifdef NDS
DMA3_SRC = (u32)buff;
DMA3_DEST = (u32)MP_DATA;
DMA3_CR = 256 | DMA_COPY_HALFWORDS | DMA_DST_FIX;
#else
DMA3COPY( buff, MP_DATA, 256 | DMA16 | DMA_ENABLE | DMA_DST_FIXED);
#endif
buff += BYTES_PER_READ / 2;
#elif defined _CF_ALLOW_UNALIGNED
i=256;
if ((u32)buff_u8 & 0x01) {
while(i--)
{
temp = *buff_u8++;
temp |= *buff_u8++ << 8;
*MP_DATA = temp;
}
} else {
while(i--)
*MP_DATA = *buff++;
}
#else
i=256;
while(i--)
*MP_DATA = *buff++;
#endif
}
#if defined _CF_USE_DMA && defined NDS
// Wait for end of transfer before returning
while(DMA3_CR & DMA_BUSY);
#endif
return true;
}
/*-----------------------------------------------------------------
_MPCF_Shutdown
unload the GBAMP CF interface
-----------------------------------------------------------------*/
bool _MPCF_shutdown(void) {
return _MPCF_clearStatus() ;
}
/*-----------------------------------------------------------------
_MPCF_startUp
_MPCF_startup
initializes the CF interface, returns true if successful,
otherwise returns false
-----------------------------------------------------------------*/
bool _MPCF_startUp(void) {
// See if there is a read/write register
u16 temp = REG_MPCF_LBA1;
REG_MPCF_LBA1 = (~temp & 0xFF);
temp = (~temp & 0xFF);
if (!(REG_MPCF_LBA1 == temp)) {
return false;
}
// Make sure it is 8 bit
REG_MPCF_LBA1 = 0xAA55;
if (REG_MPCF_LBA1 == 0xAA55) {
return false;
}
return true;
bool _MPCF_startup(void) {
return _CF_startup(&_MPCF_Registers);
}
/*-----------------------------------------------------------------
@ -339,10 +91,10 @@ the actual interface structure
IO_INTERFACE _io_mpcf = {
DEVICE_TYPE_MPCF,
FEATURE_MEDIUM_CANREAD | FEATURE_MEDIUM_CANWRITE | FEATURE_SLOT_GBA,
(FN_MEDIUM_STARTUP)&_MPCF_startUp,
(FN_MEDIUM_ISINSERTED)&_MPCF_isInserted,
(FN_MEDIUM_READSECTORS)&_MPCF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_MPCF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_MPCF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_MPCF_shutdown
(FN_MEDIUM_STARTUP)&_MPCF_startup,
(FN_MEDIUM_ISINSERTED)&_CF_isInserted,
(FN_MEDIUM_READSECTORS)&_CF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_CF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_CF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_CF_shutdown
} ;

View File

@ -36,52 +36,48 @@
#include "io_sccf.h"
#include "io_sc_common.h"
#include "io_cf_common.h"
/*-----------------------------------------------------------------
Since all CF addresses and commands are the same for the GBAMP,
simply use it's functions instead.
-----------------------------------------------------------------*/
//---------------------------------------------------------------
// SC CF Addresses
#define REG_SCCF_STS ((vu16*)0x098C0000) // Status of the CF Card / Device control
#define REG_SCCF_CMD ((vu16*)0x090E0000) // Commands sent to control chip and status return
#define REG_SCCF_ERR ((vu16*)0x09020000) // Errors / Features
extern bool _MPCF_isInserted (void);
extern bool _MPCF_clearStatus (void);
extern bool _MPCF_readSectors (u32 sector, u32 numSectors, void* buffer);
extern bool _MPCF_writeSectors (u32 sector, u32 numSectors, void* buffer);
#define REG_SCCF_SEC ((vu16*)0x09040000) // Number of sector to transfer
#define REG_SCCF_LBA1 ((vu16*)0x09060000) // 1st byte of sector address
#define REG_SCCF_LBA2 ((vu16*)0x09080000) // 2nd byte of sector address
#define REG_SCCF_LBA3 ((vu16*)0x090A0000) // 3rd byte of sector address
#define REG_SCCF_LBA4 ((vu16*)0x090C0000) // last nibble of sector address | 0xE0
#define REG_SCCF_DATA ((vu16*)0x09000000) // Pointer to buffer of CF data transered from card
static const CF_REGISTERS _SCCF_Registers = {
REG_SCCF_DATA,
REG_SCCF_STS,
REG_SCCF_CMD,
REG_SCCF_ERR,
REG_SCCF_SEC,
REG_SCCF_LBA1,
REG_SCCF_LBA2,
REG_SCCF_LBA3,
REG_SCCF_LBA4
};
/*-----------------------------------------------------------------
_SCCF_unlock
Returns true if SuperCard was unlocked, false if failed
Added by MightyMax
Modified by Chishm
-----------------------------------------------------------------*/
bool _SCCF_unlock(void) {
#define CF_REG_LBA1 (*(vu16*)0x09060000)
unsigned char temp;
bool _SCCF_startup(void) {
_SC_changeMode (SC_MODE_MEDIA);
// provoke a ready reply
temp = CF_REG_LBA1;
CF_REG_LBA1 = (~temp & 0xFF);
temp = (~temp & 0xFF);
return (CF_REG_LBA1 == temp);
#undef CF_REG_LBA1
return _CF_startup(&_SCCF_Registers);
}
bool _SCCF_shutdown(void) {
return _MPCF_clearStatus() ;
} ;
bool _SCCF_startUp(void) {
return _SCCF_unlock() ;
} ;
IO_INTERFACE _io_sccf = {
DEVICE_TYPE_SCCF,
FEATURE_MEDIUM_CANREAD | FEATURE_MEDIUM_CANWRITE | FEATURE_SLOT_GBA,
(FN_MEDIUM_STARTUP)&_SCCF_startUp,
(FN_MEDIUM_ISINSERTED)&_MPCF_isInserted,
(FN_MEDIUM_READSECTORS)&_MPCF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_MPCF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_MPCF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_SCCF_shutdown
(FN_MEDIUM_STARTUP)&_SCCF_startup,
(FN_MEDIUM_ISINSERTED)&_CF_isInserted,
(FN_MEDIUM_READSECTORS)&_CF_readSectors,
(FN_MEDIUM_WRITESECTORS)&_CF_writeSectors,
(FN_MEDIUM_CLEARSTATUS)&_CF_clearStatus,
(FN_MEDIUM_SHUTDOWN)&_CF_shutdown
} ;