mini/hollywood.h
2009-05-15 05:33:11 -07:00

200 lines
6.1 KiB
C

/*
mini - a Free Software replacement for the Nintendo/BroadOn IOS.
Hollywood register definitions
Copyright (C) 2008, 2009 Haxx Enterprises <bushing@gmail.com>
Copyright (C) 2008, 2009 Sven Peter <svenpeter@gmail.com>
Copyright (C) 2008, 2009 Hector Martin "marcan" <marcan@marcansoft.com>
Copyright (C) 2008, 2009 John Kelley <wiidev@kelley.ca>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, version 2.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __HOLLYWOOD_H__
#define __HOLLYWOOD_H__
/* Hollywood Registers */
#define HW_PPC_REG_BASE 0xd000000
#define HW_REG_BASE 0xd800000
// The PPC can only see the first three IPC registers
#define HW_IPC_PPCMSG (HW_REG_BASE + 0x000)
#define HW_IPC_PPCCTRL (HW_REG_BASE + 0x004)
#define HW_IPC_ARMMSG (HW_REG_BASE + 0x008)
#define HW_IPC_ARMCTRL (HW_REG_BASE + 0x00c)
#define HW_TIMER (HW_REG_BASE + 0x010)
#define HW_ALARM (HW_REG_BASE + 0x014)
#define HW_PPCIRQFLAG (HW_REG_BASE + 0x030)
#define HW_PPCIRQMASK (HW_REG_BASE + 0x034)
#define HW_ARMIRQFLAG (HW_REG_BASE + 0x038)
#define HW_ARMIRQMASK (HW_REG_BASE + 0x03c)
#define HW_MEMMIRR (HW_REG_BASE + 0x060)
// something to do with PPCBOOT
// and legacy DI it seems ?!?
#define HW_EXICTRL (HW_REG_BASE + 0x070)
#define EXICTRL_ENABLE_EXI 1
// PPC side of GPIO1 (Starlet can access this too)
// Output state
#define HW_GPIO1BOUT (HW_REG_BASE + 0x0c0)
// Direction (1=output)
#define HW_GPIO1BDIR (HW_REG_BASE + 0x0c4)
// Input state
#define HW_GPIO1BIN (HW_REG_BASE + 0x0c8)
// Interrupt level
#define HW_GPIO1BINTLVL (HW_REG_BASE + 0x0cc)
// Interrupt flags (write 1 to clear)
#define HW_GPIO1BINTFLAG (HW_REG_BASE + 0x0d0)
// Interrupt propagation enable
// Do these interrupts go anywhere???
#define HW_GPIO1BINTENABLE (HW_REG_BASE + 0x0d4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define HW_GPIO1BINMIR (HW_REG_BASE + 0x0d8)
// 0xFFFFFF by default, if cleared disables respective outputs. Top bits non-settable.
#define HW_GPIO1ENABLE (HW_REG_BASE + 0x0dc)
#define HW_GPIO1_SLOT 0x000020
#define HW_GPIO1_DEBUG 0xFF0000
#define HW_GPIO1_DEBUG_SH 16
// Starlet side of GPIO1
// Output state
#define HW_GPIO1OUT (HW_REG_BASE + 0x0e0)
// Direction (1=output)
#define HW_GPIO1DIR (HW_REG_BASE + 0x0e4)
// Input state
#define HW_GPIO1IN (HW_REG_BASE + 0x0e8)
// Interrupt level
#define HW_GPIO1INTLVL (HW_REG_BASE + 0x0ec)
// Interrupt flags (write 1 to clear)
#define HW_GPIO1INTFLAG (HW_REG_BASE + 0x0f0)
// Interrupt propagation enable (interrupts go to main interrupt 0x800)
#define HW_GPIO1INTENABLE (HW_REG_BASE + 0x0f4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define HW_GPIO1INMIR (HW_REG_BASE + 0x0f8)
// Owner of each GPIO bit. If 1, GPIO1B registers assume control. If 0, GPIO1 registers assume control.
#define HW_GPIO1OWNER (HW_REG_BASE + 0x0fc)
// ????
#define HW_DIFLAGS (HW_REG_BASE + 0x180)
#define DIFLAGS_BOOT_CODE 0x100000
// maybe a GPIO???
#define HW_RESETS (HW_REG_BASE + 0x194)
#define HW_CLOCKS (HW_REG_BASE + 0x1b4)
#define HW_GPIO2OUT (HW_REG_BASE + 0x1c8)
#define HW_GPIO2DIR (HW_REG_BASE + 0x1cc)
#define HW_GPIO2IN (HW_REG_BASE + 0x1d0)
#define HW_OTPCMD (HW_REG_BASE + 0x1ec)
#define HW_OTPDATA (HW_REG_BASE + 0x1f0)
#define HW_VERSION (HW_REG_BASE + 0x214)
/* NAND Registers */
#define NAND_REG_BASE 0xd010000
#define NAND_CMD (NAND_REG_BASE + 0x000)
#define NAND_STATUS NAND_CMD
#define NAND_CONF (NAND_REG_BASE + 0x004)
#define NAND_ADDR0 (NAND_REG_BASE + 0x008)
#define NAND_ADDR1 (NAND_REG_BASE + 0x00c)
#define NAND_DATA (NAND_REG_BASE + 0x010)
#define NAND_ECC (NAND_REG_BASE + 0x014)
#define NAND_UNK1 (NAND_REG_BASE + 0x018)
#define NAND_UNK2 (NAND_REG_BASE + 0x01c)
/* AES Registers */
#define AES_REG_BASE 0xd020000
#define AES_CMD (AES_REG_BASE + 0x000)
#define AES_SRC (AES_REG_BASE + 0x004)
#define AES_DEST (AES_REG_BASE + 0x008)
#define AES_KEY (AES_REG_BASE + 0x00c)
#define AES_IV (AES_REG_BASE + 0x010)
/* SHA-1 Registers */
#define SHA_REG_BASE 0xd030000
#define SHA_CMD (SHA_REG_BASE + 0x000)
#define SHA_SRC (SHA_REG_BASE + 0x004)
#define SHA_H0 (SHA_REG_BASE + 0x008)
#define SHA_H1 (SHA_REG_BASE + 0x00c)
#define SHA_H2 (SHA_REG_BASE + 0x010)
#define SHA_H3 (SHA_REG_BASE + 0x014)
#define SHA_H4 (SHA_REG_BASE + 0x018)
/* SD Host Controller Registers */
#define SDHC_REG_BASE 0xd070000
/* EXI Registers */
#define EXI_REG_BASE 0xd806800
#define EXI0_REG_BASE (EXI_REG_BASE+0x000)
#define EXI1_REG_BASE (EXI_REG_BASE+0x014)
#define EXI2_REG_BASE (EXI_REG_BASE+0x028)
#define EXI0_CSR (EXI0_REG_BASE+0x000)
#define EXI0_MAR (EXI0_REG_BASE+0x004)
#define EXI0_LENGTH (EXI0_REG_BASE+0x008)
#define EXI0_CR (EXI0_REG_BASE+0x00c)
#define EXI0_DATA (EXI0_REG_BASE+0x010)
#define EXI1_CSR (EXI1_REG_BASE+0x000)
#define EXI1_MAR (EXI1_REG_BASE+0x004)
#define EXI1_LENGTH (EXI1_REG_BASE+0x008)
#define EXI1_CR (EXI1_REG_BASE+0x00c)
#define EXI1_DATA (EXI1_REG_BASE+0x010)
#define EXI2_CSR (EXI2_REG_BASE+0x000)
#define EXI2_MAR (EXI2_REG_BASE+0x004)
#define EXI2_LENGTH (EXI2_REG_BASE+0x008)
#define EXI2_CR (EXI2_REG_BASE+0x00c)
#define EXI2_DATA (EXI2_REG_BASE+0x010)
#define EXI_BOOT_BASE (EXI_REG_BASE+0x040)
/* MEMORY CONTROLLER Registers */
#define MEM_REG_BASE 0xd8b4000
#define MEM_PROT (MEM_REG_BASE+0x20a)
#define MEM_PROT_START (MEM_REG_BASE+0x20c)
#define MEM_PROT_END (MEM_REG_BASE+0x20e)
#define MEM_FLUSHREQ (MEM_REG_BASE+0x228)
#define MEM_FLUSHACK (MEM_REG_BASE+0x22a)
#endif