mini/hollywood.h
2009-05-15 05:35:17 -07:00

179 lines
5.6 KiB
C

/*
mini - a Free Software replacement for the Nintendo/BroadOn IOS.
Hollywood register definitions
Copyright (C) 2008, 2009 Haxx Enterprises <bushing@gmail.com>
Copyright (C) 2008, 2009 Sven Peter <svenpeter@gmail.com>
Copyright (C) 2008, 2009 Hector Martin "marcan" <marcan@marcansoft.com>
Copyright (C) 2008, 2009 John Kelley <wiidev@kelley.ca>
# This code is licensed to you under the terms of the GNU GPL, version 2;
# see file COPYING or http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
*/
#ifndef __HOLLYWOOD_H__
#define __HOLLYWOOD_H__
/* Hollywood Registers */
#define HW_PPC_REG_BASE 0xd000000
#define HW_REG_BASE 0xd800000
// The PPC can only see the first three IPC registers
#define HW_IPC_PPCMSG (HW_REG_BASE + 0x000)
#define HW_IPC_PPCCTRL (HW_REG_BASE + 0x004)
#define HW_IPC_ARMMSG (HW_REG_BASE + 0x008)
#define HW_IPC_ARMCTRL (HW_REG_BASE + 0x00c)
#define HW_TIMER (HW_REG_BASE + 0x010)
#define HW_ALARM (HW_REG_BASE + 0x014)
#define HW_PPCIRQFLAG (HW_REG_BASE + 0x030)
#define HW_PPCIRQMASK (HW_REG_BASE + 0x034)
#define HW_ARMIRQFLAG (HW_REG_BASE + 0x038)
#define HW_ARMIRQMASK (HW_REG_BASE + 0x03c)
#define HW_MEMMIRR (HW_REG_BASE + 0x060)
// something to do with PPCBOOT
// and legacy DI it seems ?!?
#define HW_EXICTRL (HW_REG_BASE + 0x070)
#define EXICTRL_ENABLE_EXI 1
// PPC side of GPIO1 (Starlet can access this too)
// Output state
#define HW_GPIO1BOUT (HW_REG_BASE + 0x0c0)
// Direction (1=output)
#define HW_GPIO1BDIR (HW_REG_BASE + 0x0c4)
// Input state
#define HW_GPIO1BIN (HW_REG_BASE + 0x0c8)
// Interrupt level
#define HW_GPIO1BINTLVL (HW_REG_BASE + 0x0cc)
// Interrupt flags (write 1 to clear)
#define HW_GPIO1BINTFLAG (HW_REG_BASE + 0x0d0)
// Interrupt propagation enable
// Do these interrupts go anywhere???
#define HW_GPIO1BINTENABLE (HW_REG_BASE + 0x0d4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define HW_GPIO1BINMIR (HW_REG_BASE + 0x0d8)
// 0xFFFFFF by default, if cleared disables respective outputs. Top bits non-settable.
#define HW_GPIO1ENABLE (HW_REG_BASE + 0x0dc)
#define HW_GPIO1_SLOT 0x000020
#define HW_GPIO1_DEBUG 0xFF0000
#define HW_GPIO1_DEBUG_SH 16
// Starlet side of GPIO1
// Output state
#define HW_GPIO1OUT (HW_REG_BASE + 0x0e0)
// Direction (1=output)
#define HW_GPIO1DIR (HW_REG_BASE + 0x0e4)
// Input state
#define HW_GPIO1IN (HW_REG_BASE + 0x0e8)
// Interrupt level
#define HW_GPIO1INTLVL (HW_REG_BASE + 0x0ec)
// Interrupt flags (write 1 to clear)
#define HW_GPIO1INTFLAG (HW_REG_BASE + 0x0f0)
// Interrupt propagation enable (interrupts go to main interrupt 0x800)
#define HW_GPIO1INTENABLE (HW_REG_BASE + 0x0f4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define HW_GPIO1INMIR (HW_REG_BASE + 0x0f8)
// Owner of each GPIO bit. If 1, GPIO1B registers assume control. If 0, GPIO1 registers assume control.
#define HW_GPIO1OWNER (HW_REG_BASE + 0x0fc)
// ????
#define HW_DIFLAGS (HW_REG_BASE + 0x180)
#define DIFLAGS_BOOT_CODE 0x100000
// maybe a GPIO???
#define HW_RESETS (HW_REG_BASE + 0x194)
#define HW_CLOCKS (HW_REG_BASE + 0x1b4)
#define HW_GPIO2OUT (HW_REG_BASE + 0x1c8)
#define HW_GPIO2DIR (HW_REG_BASE + 0x1cc)
#define HW_GPIO2IN (HW_REG_BASE + 0x1d0)
#define HW_OTPCMD (HW_REG_BASE + 0x1ec)
#define HW_OTPDATA (HW_REG_BASE + 0x1f0)
#define HW_VERSION (HW_REG_BASE + 0x214)
/* NAND Registers */
#define NAND_REG_BASE 0xd010000
#define NAND_CMD (NAND_REG_BASE + 0x000)
#define NAND_STATUS NAND_CMD
#define NAND_CONF (NAND_REG_BASE + 0x004)
#define NAND_ADDR0 (NAND_REG_BASE + 0x008)
#define NAND_ADDR1 (NAND_REG_BASE + 0x00c)
#define NAND_DATA (NAND_REG_BASE + 0x010)
#define NAND_ECC (NAND_REG_BASE + 0x014)
#define NAND_UNK1 (NAND_REG_BASE + 0x018)
#define NAND_UNK2 (NAND_REG_BASE + 0x01c)
/* AES Registers */
#define AES_REG_BASE 0xd020000
#define AES_CMD (AES_REG_BASE + 0x000)
#define AES_SRC (AES_REG_BASE + 0x004)
#define AES_DEST (AES_REG_BASE + 0x008)
#define AES_KEY (AES_REG_BASE + 0x00c)
#define AES_IV (AES_REG_BASE + 0x010)
/* SHA-1 Registers */
#define SHA_REG_BASE 0xd030000
#define SHA_CMD (SHA_REG_BASE + 0x000)
#define SHA_SRC (SHA_REG_BASE + 0x004)
#define SHA_H0 (SHA_REG_BASE + 0x008)
#define SHA_H1 (SHA_REG_BASE + 0x00c)
#define SHA_H2 (SHA_REG_BASE + 0x010)
#define SHA_H3 (SHA_REG_BASE + 0x014)
#define SHA_H4 (SHA_REG_BASE + 0x018)
/* SD Host Controller Registers */
#define SDHC_REG_BASE 0xd070000
/* EXI Registers */
#define EXI_REG_BASE 0xd806800
#define EXI0_REG_BASE (EXI_REG_BASE+0x000)
#define EXI1_REG_BASE (EXI_REG_BASE+0x014)
#define EXI2_REG_BASE (EXI_REG_BASE+0x028)
#define EXI0_CSR (EXI0_REG_BASE+0x000)
#define EXI0_MAR (EXI0_REG_BASE+0x004)
#define EXI0_LENGTH (EXI0_REG_BASE+0x008)
#define EXI0_CR (EXI0_REG_BASE+0x00c)
#define EXI0_DATA (EXI0_REG_BASE+0x010)
#define EXI1_CSR (EXI1_REG_BASE+0x000)
#define EXI1_MAR (EXI1_REG_BASE+0x004)
#define EXI1_LENGTH (EXI1_REG_BASE+0x008)
#define EXI1_CR (EXI1_REG_BASE+0x00c)
#define EXI1_DATA (EXI1_REG_BASE+0x010)
#define EXI2_CSR (EXI2_REG_BASE+0x000)
#define EXI2_MAR (EXI2_REG_BASE+0x004)
#define EXI2_LENGTH (EXI2_REG_BASE+0x008)
#define EXI2_CR (EXI2_REG_BASE+0x00c)
#define EXI2_DATA (EXI2_REG_BASE+0x010)
#define EXI_BOOT_BASE (EXI_REG_BASE+0x040)
/* MEMORY CONTROLLER Registers */
#define MEM_REG_BASE 0xd8b4000
#define MEM_PROT (MEM_REG_BASE+0x20a)
#define MEM_PROT_START (MEM_REG_BASE+0x20c)
#define MEM_PROT_END (MEM_REG_BASE+0x20e)
#define MEM_FLUSHREQ (MEM_REG_BASE+0x228)
#define MEM_FLUSHACK (MEM_REG_BASE+0x22a)
#endif