197 lines
4.8 KiB
Plaintext
197 lines
4.8 KiB
Plaintext
Command line options for E-UAE
|
|
==============================
|
|
|
|
E-UAE supports the following command-line options. Note that, where
|
|
applicable, these will over-ride any similar options specified in the
|
|
default configuration file.
|
|
|
|
In the following, <path> should be substituted with an appropriate file path
|
|
and <n> with an integer.
|
|
|
|
This document (like the rest of the documentation) is a work-in-progress.
|
|
|
|
|
|
-h
|
|
Displays summary of configuration options.
|
|
|
|
|
|
-f <path>
|
|
Load the configuration file specified by <path>. See configuration.txt for
|
|
more information about configuration files. For example:
|
|
|
|
-f ~/my_uae_configs/a1200.uaerc
|
|
|
|
|
|
-s <option>
|
|
Specify an option in configuration file (<key>=<value>) format. For
|
|
example, use
|
|
|
|
-s ntsc=true
|
|
|
|
to start E-UAE in NTSC mode.
|
|
|
|
See configuration.txt for supported options.
|
|
|
|
|
|
-0 <path>
|
|
-1 <path>
|
|
-2 <path>
|
|
-3 <path>
|
|
Mount the floppy disk image specified by <path> in drive 0/1/2/3. For
|
|
example:
|
|
|
|
-0 somedisk.adf
|
|
|
|
|
|
-r <path>
|
|
Load the ROM image specified by <path>.
|
|
|
|
|
|
-K <path>
|
|
Use the key file specified by <path> to decrypt an encrypted ROM image (from
|
|
Cloanto's AmigaForever package).
|
|
|
|
|
|
-C<n>
|
|
Selects type of CPU to emulate. The value <n> corresponds to CPU types as
|
|
follows:
|
|
0: 6800
|
|
1: 68010
|
|
2: 68020
|
|
3: 68020/68881
|
|
4: 68040
|
|
|
|
|
|
-w<n>
|
|
Selects the performance model for the CPU emulation.
|
|
|
|
A value of 0 for <n> corresponds to 'real' CPU speed, that is,
|
|
approximately A500 speed; a value of -1 corresponds to the 'max' CPU speed,
|
|
that is, the emulation will run as fast as your system allows. A positive
|
|
value for <n> will select 'adjustable' CPU speed, where <n> specifies the
|
|
number of virtual emulator cycles that each CPU instructions will take and
|
|
can be between 1 and 5120. (Positive values for <n> correspond to the same
|
|
values specified with the 'finegrain_cpu_speed=' configuration option).
|
|
|
|
|
|
-v<n>
|
|
Selects the type of Amiga chip set to emulate. The value <n> corresponds to
|
|
chip set types as follows:
|
|
|
|
0: OCS
|
|
1: OCS but with the ECS or "Fat" Agnus.
|
|
3: ECS
|
|
4: AGA
|
|
|
|
|
|
-c<n>
|
|
Emulate <n> * 512 KB of Chip memory. The valid range of values for <n> is
|
|
from 1 to 16, which corresponds to 512 KB to 8 MB of Chip memory. For example:
|
|
|
|
-c4
|
|
|
|
will cause E-UAE to emulate 2 MB of Chip memory.
|
|
|
|
|
|
-b<n>
|
|
Emulate <n> * 256 KB of Slow memory. Valid values for <n> include 0, 2, 4
|
|
and 6, which corresponds to 0 KB, 512 KB, 1 MB and 1.5 MB, respectively.
|
|
|
|
|
|
-F<n>
|
|
Emulate <n> MB of ZorroII Fast memory. A maximum of 8 MB is supported.
|
|
|
|
|
|
-Z<n>
|
|
Emulate <n> MB of ZorroIII Fast memory. A maximum of 512 MB is supported.
|
|
|
|
|
|
-U<n>
|
|
Emulate <n> MB of video memory on the virtual Picasso96 graphics card.
|
|
Selecting <n> greater than 0, enables the Picasso96 emulation, and a maximum
|
|
of 32 MB of video memory may be emulated.
|
|
|
|
|
|
-m/M
|
|
Use filesystem as Amiga volume, arguments are: access,'Amiga
|
|
volume-name':'host directory path' - where 'access' can be 'read-only' or
|
|
'read-write'
|
|
|
|
-W
|
|
Hardfile specifications, arguments are: access, sectors, surfaces,
|
|
reserved, blocksize, path format
|
|
|
|
-S
|
|
parse_sound_spec
|
|
|
|
-R
|
|
frame-skip rate, between 1 and 20
|
|
|
|
-i
|
|
print illegal memory access by Amiga software?
|
|
|
|
-J
|
|
joystick: Use -J xy, where x and y can be 0 for joystick 0, 1 for joystick
|
|
1, M for mouse, and a, b or c for different keyboard settings.
|
|
|
|
-t
|
|
test drawing speed
|
|
|
|
-G
|
|
disable GUI and goes straight to emulator
|
|
|
|
-D
|
|
Enable the debugger
|
|
|
|
-n
|
|
Perform blits immediately, 0: disable, 1: enable
|
|
|
|
-l
|
|
keyboard language: (possible arguments: de, dk, us, se, fr, it, es)
|
|
|
|
-O
|
|
The format to use is: "width:height:modifiers", where modifiers are: l:
|
|
Treat display as lo-res, x: Center display horizontally, y: Center display
|
|
vertically, d: double line, a: fullscreen Amiga, p: fullscreen Picasso96,
|
|
c: Correct aspect ratio
|
|
|
|
-H
|
|
color_mode, or amiga_screen_type (if compiled with Amiga GFX support)
|
|
|
|
|
|
Options specific to the X11 graphics driver
|
|
===========================================
|
|
|
|
-L
|
|
Use "low-bandwidth" mode, which may reduce the amount of data transferred
|
|
between E-UAE and the X server. That's particularly an advantage when these
|
|
are running on two different machines in a network.
|
|
|
|
-T
|
|
Use the MIT-SHM extension. This may not be available on all machines, and
|
|
it will not work if E-UAE and the X server are not running on the same
|
|
machine. In all other configurations, turning on this option will give you
|
|
a huge speed improvement.
|
|
|
|
-x
|
|
Turn off the X11 mouse cursor.
|
|
|
|
|
|
Options specific to the AmigaOS graphics driver
|
|
===============================================
|
|
|
|
-T
|
|
If using a palette-mapped display (256 colours or fewer), render the output
|
|
in grey-scale rather than colour.
|
|
|
|
-x
|
|
If using a palette-mapped display (256 colours or fewer), don't dither the
|
|
output.
|
|
|
|
|
|
Options specific to the Curses graphics driver
|
|
==============================================
|
|
|
|
-x
|
|
Enable reverse video.
|