/* gzio.c -- IO on .gz files
 * Copyright (C) 1995-2002 Jean-loup Gailly.
 * For conditions of distribution and use, see copyright notice in zlib.h
 *
 * Compile this file with -DNO_DEFLATE to avoid the compression code.
 */

/* memgzio.c - IO on .gz files in memory
 * Adapted from original gzio.c from zlib library by Forgotten
 */

/* @(#) $Id: memgzio.c,v 1.3 2004/01/17 23:07:32 kxu Exp $ */

#include <stdio.h>
#include <stdarg.h>
#include <stdlib.h>

#include "memgzio.h"

/*struct internal_state {int dummy;};*/ /* for buggy compilers */

#ifndef Z_BUFSIZE
#  ifdef MAXSEG_64K
#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
#  else
#    define Z_BUFSIZE 16384
#  endif
#endif
#ifndef Z_PRINTF_BUFSIZE
#  define Z_PRINTF_BUFSIZE 4096
#endif

#define ALLOC(size) malloc(size)
#define TRYFREE(p) {if (p) free(p);}

static int gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */

/* gzip flag byte */
#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
#define COMMENT      0x10 /* bit 4 set: file comment present */
#define RESERVED     0xE0 /* bits 5..7: reserved */

typedef struct _MemFile
  {
    char *memory;
    char *next;
    int available;
    int error;
    char mode;
  }
MEMFILE;

typedef struct mem_stream
  {
    z_stream stream;
    int      z_err;   /* error code for last stream operation */
    int      z_eof;   /* set if end of input file */
    MEMFILE *file;    /* memoru file */
    Byte     *inbuf;  /* input buffer */
    Byte     *outbuf; /* output buffer */
    uLong    crc;     /* crc32 of uncompressed data */
    char     *msg;    /* error message */
    int      transparent; /* 1 if input file is not a .gz file */
    char     mode;    /* 'w' or 'r' */
    long     startpos; /* start of compressed data in file (header skipped) */
  }
mem_stream;


local gzFile gz_open      OF((char *memory, const int available, const char *mode));
local int do_flush        OF((gzFile file, int flush));
local int    get_byte     OF((mem_stream *s));
local void   check_header OF((mem_stream *s));
local int    destroy      OF((mem_stream *s));
local void   putLong      OF((MEMFILE *file, uLong x));
local uLong  getLong      OF((mem_stream *s));

local MEMFILE *memOpen(char *memory, int available, char mode)
{
  MEMFILE *f;

  if(available <= 8)
    return NULL;

  if(mode != 'w' && mode != 'r')
    return NULL;

  f = (MEMFILE *)malloc(sizeof(MEMFILE));

  f->memory = memory;
  f->mode = mode;
  f->error = 0;

  if(mode == 'w')
    {
      f->available = available - 8;
      f->next = memory + 8;
      memory[0] = 'V';
      memory[1] = 'B';
      memory[2] = 'A';
      memory[3] = ' ';
      *((int *)(memory+4)) = 0;
    }
  else
    {
      if(memory[0] != 'V' || memory[1] != 'B' || memory[2] != 'A' ||
          memory[3] != ' ')
        {
          free(f);
          return NULL;
        }
      f->available = *((int *)(memory+4));
      f->next = memory+8;
    }

  return f;
}

local size_t memWrite(const void *buffer, size_t size, size_t count,
                      MEMFILE *file)
{
  size_t total = size*count;

  if(file->mode != 'w')
    {
      file->error = 1;
      return 0;
    }

  if(total > (size_t)file->available)
    {
      total = file->available;
    }
  memcpy(file->next, buffer, total);
  file->available -= total;
  file->next += total;
  return total;
}

local size_t memRead(void *buffer, size_t size, size_t count,
                     MEMFILE *file)
{
  size_t total = size*count;

  if(file->mode != 'r')
    {
      file->error = 1;
      return 0;
    }

  if(file->available == 0)
    return -1;

  if(total > (size_t)file->available)
    {
      total = file->available;
    }
  memcpy(buffer, file->next, total);
  file->available -= total;
  file->next += total;
  return total;
}

local int memPutc(int c, MEMFILE *file)
{
  if(file->mode != 'w')
    {
      file->error = 1;
      return -1;
    }

  if(file->available >= 1)
    {
      *file->next++ = c;
      file->available--;
    }
  else
    return -1;

  return c;
}

local long memTell(MEMFILE *f)
{
  return (f->next - f->memory) - 8;
}

local int memError(MEMFILE *f)
{
  return f->error;
}

local int memClose(MEMFILE *f)
{
  if(f->mode == 'w')
    {
      *((int *)(f->memory+4)) = memTell(f);
    }
  free(f);
  return 0;
}

local int memPrintf(MEMFILE *f, const char *format, ...)
{
  char buffer[80];
  va_list list;
  int len;

  va_start(list, format);
  len = vsprintf(buffer, format, list);
  va_end(list);

  return memWrite(buffer, 1, len, f);
}

/* ===========================================================================
     Opens a gzip (.gz) file for reading or writing. The mode parameter
   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
   or path name (if fd == -1).
     gz_open return NULL if the file could not be opened or if there was
   insufficient memory to allocate the (de)compression state; errno
   can be checked to distinguish the two cases (if errno is zero, the
   zlib error is Z_MEM_ERROR).
*/
local gzFile gz_open (memory, available, mode)
char *memory;
const int available;
const char *mode;
{
  int err;
  int level = Z_DEFAULT_COMPRESSION; /* compression level */
  int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
  char *p = (char*)mode;
  mem_stream *s;
  char fmode[80]; /* copy of mode, without the compression level */
  char *m = fmode;

  s = (mem_stream *)ALLOC(sizeof(mem_stream));
  if (!s) return Z_NULL;

  s->stream.zalloc = (alloc_func)0;
  s->stream.zfree = (free_func)0;
  s->stream.opaque = (voidpf)0;
  s->stream.next_in = s->inbuf = Z_NULL;
  s->stream.next_out = s->outbuf = Z_NULL;
  s->stream.avail_in = s->stream.avail_out = 0;
  s->z_err = Z_OK;
  s->z_eof = 0;
  s->crc = crc32(0L, Z_NULL, 0);
  s->msg = NULL;
  s->transparent = 0;
  s->file = NULL;

  s->mode = '\0';
  do
    {
      if (*p == 'r') s->mode = 'r';
      if (*p == 'w' || *p == 'a') s->mode = 'w';
      if (*p >= '0' && *p <= '9')
        {
          level = *p - '0';
        }
      else if (*p == 'f')
        {
          strategy = Z_FILTERED;
        }
      else if (*p == 'h')
        {
          strategy = Z_HUFFMAN_ONLY;
        }
      else
        {
          *m++ = *p; /* copy the mode */
        }
    }
  while (*p++ && m != fmode + sizeof(fmode));
  if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;

  if (s->mode == 'w')
    {
#ifdef NO_DEFLATE
      err = Z_STREAM_ERROR;
#else
      err = deflateInit2(&(s->stream), level,
                         Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
      /* windowBits is passed < 0 to suppress zlib header */

      s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
#endif
      if (err != Z_OK || s->outbuf == Z_NULL)
        {
          return destroy(s), (gzFile)Z_NULL;
        }
    }
  else
    {
      s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);

      err = inflateInit2(&(s->stream), -MAX_WBITS);
      /* windowBits is passed < 0 to tell that there is no zlib header.
       * Note that in this case inflate *requires* an extra "dummy" byte
       * after the compressed stream in order to complete decompression and
       * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
       * present after the compressed stream.
       */
      if (err != Z_OK || s->inbuf == Z_NULL)
        {
          return destroy(s), (gzFile)Z_NULL;
        }
    }
  s->stream.avail_out = Z_BUFSIZE;

  errno = 0;
  s->file = memOpen(memory, available, s->mode);

  if (s->file == NULL)
    {
      return destroy(s), (gzFile)Z_NULL;
    }

  if (s->mode == 'w')
    {
      /* Write a very simple .gz header:
       */
      memPrintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
                Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
      s->startpos = 10L;
      /* We use 10L instead of ftell(s->file) to because ftell causes an
              * fflush on some systems. This version of the library doesn't use
              * startpos anyway in write mode, so this initialization is not
              * necessary.
              */
    }
  else
    {
      check_header(s); /* skip the .gz header */
      s->startpos = (memTell(s->file) - s->stream.avail_in);
    }

  return (gzFile)s;
}

/* ===========================================================================
     Opens a gzip (.gz) file for reading or writing.
*/
gzFile ZEXPORT memgzopen (memory, available, mode)
char *memory;
int available;
const char *mode;
{
  return gz_open (memory, available, mode);
}

/* ===========================================================================
     Read a byte from a mem_stream; update next_in and avail_in. Return EOF
   for end of file.
   IN assertion: the stream s has been sucessfully opened for reading.
*/
local int get_byte(s)
mem_stream *s;
{
  if (s->z_eof) return EOF;
  if (s->stream.avail_in == 0)
    {
      errno = 0;
      s->stream.avail_in = memRead(s->inbuf, 1, Z_BUFSIZE, s->file);
      if (s->stream.avail_in == 0)
        {
          s->z_eof = 1;
          if (memError(s->file)) s->z_err = Z_ERRNO;
          return EOF;
        }
      s->stream.next_in = s->inbuf;
    }
  s->stream.avail_in--;
  return *(s->stream.next_in)++;
}

/* ===========================================================================
      Check the gzip header of a mem_stream opened for reading. Set the stream
    mode to transparent if the gzip magic header is not present; set s->err
    to Z_DATA_ERROR if the magic header is present but the rest of the header
    is incorrect.
    IN assertion: the stream s has already been created sucessfully;
       s->stream.avail_in is zero for the first time, but may be non-zero
       for concatenated .gz files.
*/
local void check_header(s)
mem_stream *s;
{
  int method; /* method byte */
  int flags;  /* flags byte */
  uInt len;
  int c;

  /* Check the gzip magic header */
  for (len = 0; len < 2; len++)
    {
      c = get_byte(s);
      if (c != gz_magic[len])
        {
          if (len != 0) s->stream.avail_in++, s->stream.next_in--;
          if (c != EOF)
            {
              s->stream.avail_in++, s->stream.next_in--;
              s->transparent = 1;
            }
          s->z_err = s->stream.avail_in != 0 ? Z_OK : Z_STREAM_END;
          return;
        }
    }
  method = get_byte(s);
  flags = get_byte(s);
  if (method != Z_DEFLATED || (flags & RESERVED) != 0)
    {
      s->z_err = Z_DATA_ERROR;
      return;
    }

  /* Discard time, xflags and OS code: */
  for (len = 0; len < 6; len++) (void)get_byte(s);

  if ((flags & EXTRA_FIELD) != 0)
    { /* skip the extra field */
      len  =  (uInt)get_byte(s);
      len += ((uInt)get_byte(s))<<8;
      /* len is garbage if EOF but the loop below will quit anyway */
      while (len-- != 0 && get_byte(s) != EOF) ;
    }
  if ((flags & ORIG_NAME) != 0)
    { /* skip the original file name */
      while ((c = get_byte(s)) != 0 && c != EOF) ;
    }
  if ((flags & COMMENT) != 0)
    {   /* skip the .gz file comment */
      while ((c = get_byte(s)) != 0 && c != EOF) ;
    }
  if ((flags & HEAD_CRC) != 0)
    {  /* skip the header crc */
      for (len = 0; len < 2; len++) (void)get_byte(s);
    }
  s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
}

/* ===========================================================================
* Cleanup then free the given mem_stream. Return a zlib error code.
  Try freeing in the reverse order of allocations.
*/
local int destroy (s)
mem_stream *s;
{
  int err = Z_OK;

  if (!s) return Z_STREAM_ERROR;

  TRYFREE(s->msg);

  if (s->stream.state != NULL)
    {
      if (s->mode == 'w')
        {
#ifdef NO_DEFLATE
          err = Z_STREAM_ERROR;
#else
          err = deflateEnd(&(s->stream));
#endif
        }
      else if (s->mode == 'r')
        {
          err = inflateEnd(&(s->stream));
        }
    }
  if (s->file != NULL && memClose(s->file))
    {
#ifdef ESPIPE
      if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
#endif
        err = Z_ERRNO;
    }
  if (s->z_err < 0) err = s->z_err;

  TRYFREE(s->inbuf);
  TRYFREE(s->outbuf);
  TRYFREE(s);
  return err;
}

/* ===========================================================================
     Reads the given number of uncompressed bytes from the compressed file.
   gzread returns the number of bytes actually read (0 for end of file).
*/
int ZEXPORT memgzread (file, buf, len)
gzFile file;
voidp buf;
unsigned len;
{
  mem_stream *s = (mem_stream*)file;
  Bytef *start = (Bytef*)buf; /* starting point for crc computation */
  Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */

  if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;

  if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
  if (s->z_err == Z_STREAM_END) return 0;  /* EOF */

  next_out = (Byte*)buf;
  s->stream.next_out = (Bytef*)buf;
  s->stream.avail_out = len;

  while (s->stream.avail_out != 0)
    {

      if (s->transparent)
        {
          /* Copy first the lookahead bytes: */
          uInt n = s->stream.avail_in;
          if (n > s->stream.avail_out) n = s->stream.avail_out;
          if (n > 0)
            {
              zmemcpy(s->stream.next_out, s->stream.next_in, n);
              next_out += n;
              s->stream.next_out = next_out;
              s->stream.next_in   += n;
              s->stream.avail_out -= n;
              s->stream.avail_in  -= n;
            }
          if (s->stream.avail_out > 0)
            {
              s->stream.avail_out -= memRead(next_out, 1, s->stream.avail_out,
                                             s->file);
            }
          len -= s->stream.avail_out;
          s->stream.total_in  += (uLong)len;
          s->stream.total_out += (uLong)len;
          if (len == 0) s->z_eof = 1;
          return (int)len;
        }
      if (s->stream.avail_in == 0 && !s->z_eof)
        {

          errno = 0;
          s->stream.avail_in = memRead(s->inbuf, 1, Z_BUFSIZE, s->file);
          if (s->stream.avail_in == 0)
            {
              s->z_eof = 1;
              if (memError(s->file))
                {
                  s->z_err = Z_ERRNO;
                  break;
                }
            }
          s->stream.next_in = s->inbuf;
        }
      s->z_err = inflate(&(s->stream), Z_NO_FLUSH);

      if (s->z_err == Z_STREAM_END)
        {
          /* Check CRC and original size */
          s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
          start = s->stream.next_out;

          if (getLong(s) != s->crc)
            {
              s->z_err = Z_DATA_ERROR;
            }
          else
            {
              (void)getLong(s);
              /* The uncompressed length returned by above getlong() may
               * be different from s->stream.total_out) in case of
              * concatenated .gz files. Check for such files:
              */
              check_header(s);
              if (s->z_err == Z_OK)
                {
                  uLong total_in = s->stream.total_in;
                  uLong total_out = s->stream.total_out;

                  inflateReset(&(s->stream));
                  s->stream.total_in = total_in;
                  s->stream.total_out = total_out;
                  s->crc = crc32(0L, Z_NULL, 0);
                }
            }
        }
      if (s->z_err != Z_OK || s->z_eof) break;
    }
  s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));

  return (int)(len - s->stream.avail_out);
}


#ifndef NO_DEFLATE
/* ===========================================================================
     Writes the given number of uncompressed bytes into the compressed file.
   gzwrite returns the number of bytes actually written (0 in case of error).
*/
int ZEXPORT memgzwrite (file, buf, len)
gzFile file;
const voidp buf;
unsigned len;
{
  mem_stream *s = (mem_stream*)file;

  if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;

  s->stream.next_in = (Bytef*)buf;
  s->stream.avail_in = len;

  while (s->stream.avail_in != 0)
    {

      if (s->stream.avail_out == 0)
        {

          s->stream.next_out = s->outbuf;
          if (memWrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE)
            {
              s->z_err = Z_ERRNO;
              break;
            }
          s->stream.avail_out = Z_BUFSIZE;
        }
      s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
      if (s->z_err != Z_OK) break;
    }
  s->crc = crc32(s->crc, (const Bytef *)buf, len);

  return (int)(len - s->stream.avail_in);
}
#endif
/* ===========================================================================
     Flushes all pending output into the compressed file. The parameter
   flush is as in the deflate() function.
*/
local int do_flush (file, flush)
gzFile file;
int flush;
{
  uInt len;
  int done = 0;
  mem_stream *s = (mem_stream*)file;

  if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;

  s->stream.avail_in = 0; /* should be zero already anyway */

  for (;;)
    {
      len = Z_BUFSIZE - s->stream.avail_out;

      if (len != 0)
        {
          if ((uInt)memWrite(s->outbuf, 1, len, s->file) != len)
            {
              s->z_err = Z_ERRNO;
              return Z_ERRNO;
            }
          s->stream.next_out = s->outbuf;
          s->stream.avail_out = Z_BUFSIZE;
        }
      if (done) break;
      s->z_err = deflate(&(s->stream), flush);

      /* Ignore the second of two consecutive flushes: */
      if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;

      /* deflate has finished flushing only when it hasn't used up
       * all the available space in the output buffer: 
       */
      done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);

      if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
    }
  return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
}

/* ===========================================================================
   Outputs a long in LSB order to the given file
*/
local void putLong (file, x)
MEMFILE *file;
uLong x;
{
  int n;
  for (n = 0; n < 4; n++)
    {
      memPutc((int)(x & 0xff), file);
      x >>= 8;
    }
}

/* ===========================================================================
   Reads a long in LSB order from the given mem_stream. Sets z_err in case
   of error.
*/
local uLong getLong (s)
mem_stream *s;
{
  uLong x = (uLong)get_byte(s);
  int c;

  x += ((uLong)get_byte(s))<<8;
  x += ((uLong)get_byte(s))<<16;
  c = get_byte(s);
  if (c == EOF) s->z_err = Z_DATA_ERROR;
  x += ((uLong)c)<<24;
  return x;
}

/* ===========================================================================
     Flushes all pending output if necessary, closes the compressed file
   and deallocates all the (de)compression state.
*/
int ZEXPORT memgzclose (file)
gzFile file;
{
  int err;
  mem_stream *s = (mem_stream*)file;

  if (s == NULL) return Z_STREAM_ERROR;

  if (s->mode == 'w')
    {
#ifdef NO_DEFLATE
      return Z_STREAM_ERROR;
#else
      err = do_flush (file, Z_FINISH);
      if (err != Z_OK) return destroy((mem_stream*)file);

      putLong (s->file, s->crc);
      putLong (s->file, s->stream.total_in);
#endif
    }
  return destroy((mem_stream*)file);
}

long ZEXPORT memtell(file)
gzFile file;
{
  mem_stream *s = (mem_stream*)file;

  if (s == NULL) return Z_STREAM_ERROR;

  return memTell(s->file);
}