diff --git a/README.md b/README.md
index 61ef337..6827f98 100644
--- a/README.md
+++ b/README.md
@@ -1,6 +1,64 @@
-This is a common codebase for generating ROP-chains/etc for Wii U exploits. This uses addresses auto-located from coreinit. Currently only binary ROP-chains are supported.
+This is a common codebase for generating ROP-chains/etc for *seperate* Wii U PowerPC-userland exploits. This repo is *not* intended for end-users. At the time of writing there is no public exploits using this codebase by the same author of this codebase, if/when this ever changes this text will likely be removed. This uses addresses auto-located from coreinit, with .php for each sysver that was pre-generated. This is basically a Wii U version of this: https://github.com/yellows8/3ds_browserhax_common
+
+Currently only binary ROP-chains are supported, hence no support for using this easily with WebKit exploits. The core1-switch ROP here doesn't work correctly currently, hence this codebase isn't usable as-is unless the current core is already core1(which isn't the case for WebKit exploits it seems). This codebase was originally designed for non-WebKit exploits. Hence the use of php, this is intended for running under browser-based titles, but could be used with others as well if the ROP-chain(s) are usable with them.
 
 You must specify the "sysver={val}" URL parameter for pages using this codebase, for selecting your Wii U system-version:
 * "532": 5.3.2
 * "550": 5.5.0
 
+# Usage
+
+This codebase uses config/etc names from the 3ds repo mentioned above.
+
+If the exploit .php has to select a sysver without using the value selected with via the URL param, that could be done with the following for example(prior to using the require_once() for the common .php): "$sysver = 550;" DO NOT set $sysver to any data directly specified by the user.
+
+The $ropchainselect field determines which ROP-chain to use. Only one ROP-chain is implemented currently. When this param isn't specified, the codebase will select the default ROP-chain(val1).
+
+The default ROP-chain does the following(only usable with titles which have codegen access):
+* 1) Runs the core1-switch ROP(see above).
+* 2) Loads the codebin payload into the codegen/JIT area(with the required OSSwitchSecCodeGenMode() calls before/after), and does dcache/icache flushing/invalidation.
+* 3) Pops addresses into registers which the codebin could then use, see source.
+* 4) Jumps to the codebin payload.
+* 5) See source.
+
+The memory address of the codebin payload is required, see below. If the payload isn't guaranteed to always be at the exact same address all the time, storing a PowerPC NOP-sled right before the payload in memory is highly recommended(big-endian word value 0x60000000). The output of wiiuhaxx_generatepayload() is: wiiuhaxx_loader followed by the actual payload, with 4-byte alignment for the total size(see below).
+
+Example that the exploit .php can use:
+
+```
+<?php
+
+...
+
+require_once("wiiu_browserhax_common.php");
+
+...
+
+$generatebinrop = 1;
+$payload_srcaddr = <address of payload codebin>;
+$ROPHEAP = <some valid address the ROP can use for storing tmp data>;//Such as the following: $payload_srcaddr-0x1000.
+generate_ropchain();
+
+...
+
+$payload = wiiuhaxx_generatepayload();//Binary codebin, include this in the output exploit so that it lands in memory usable by the ROP.
+
+...
+?>
+```
+
+A config file located at "wiiuhaxx_common_cfg.php" is also required.
+* $wiiuhaxxcfg_payloadfilepath is the filepath for the actual codebin payload to run, this will be loaded to codegen+0.
+* $wiiuhaxxcfg_loaderfilepath is the filepath for wiiuhaxx_loader.bin. This loads the above payload, since due to the NOP-sled the initial code which runs(wiiuhaxx_loader) won't (always) land at codegen+0. This can be built by running the following: "make OUTPATH={filepath to copy the .bin to}".
+
+For example:
+
+```
+<?php
+
+$wiiuhaxxcfg_payloadfilepath = "<filepath>";
+$wiiuhaxxcfg_loaderfilepath = "<filepath>";
+
+?>
+```
+
diff --git a/wiiu_browserhax_common.php b/wiiu_browserhax_common.php
index 5c237a6..7064348 100644
--- a/wiiu_browserhax_common.php
+++ b/wiiu_browserhax_common.php
@@ -1,5 +1,9 @@
 <?php
 
+require_once("wiiuhaxx_common_cfg.php");
+
+if(!isset($wiiuhaxxcfg_payloadfilepath) || !isset($wiiuhaxxcfg_loaderfilepath))die("The filepaths for wiiuhaxxcfg are not set in the cfg file.");
+
 if(!isset($sysver))$sysver = -1;
 
 if(isset($_REQUEST['sysver']))
@@ -18,7 +22,7 @@ if($sysver===-1)die("The system-version must be specified via an URL parameter."
 
 require_once("wiiuhaxx_rop_sysver_$sysver.php");
 
-$ropchainselect = -1;
+if(!isset($ropchainselect))$ropchainselect = -1;
 if($ropchainselect == -1)
 {
 	$ropchainselect = 1;
@@ -100,10 +104,12 @@ function generate_ropchain()
 
 function wiiuhaxx_generatepayload()
 {
-	$actual_payload = file_get_contents("wiiuhaxx_payload.bin");
+	global $wiiuhaxxcfg_payloadfilepath, $wiiuhaxxcfg_loaderfilepath;
+
+	$actual_payload = file_get_contents($wiiuhaxxcfg_payloadfilepath);
 	if($actual_payload === FALSE || strlen($actual_payload) < 4)return FALSE;
 
-	$loader = file_get_contents("wiiuhaxx_loader.bin");
+	$loader = file_get_contents($wiiuhaxxcfg_loaderfilepath);
 	if($loader === FALSE || strlen($loader) < 4)return FALSE;
 	$len = strlen($actual_payload);