cartreader/Cart_Reader/MD.ino

1999 lines
58 KiB
Arduino
Raw Normal View History

2018-10-14 10:09:25 +02:00
//******************************************
// SEGA MEGA DRIVE MODULE
//******************************************
// Writes to Sega CD Backup RAM Cart require an extra wire from MRES (B02) to VRES (B27)
2018-10-14 10:09:25 +02:00
/******************************************
Variables
*****************************************/
unsigned long sramEnd;
byte eepbit[8];
int eepSize;
byte eeptemp;
word addrhi;
word addrlo;
word chksum;
//***********************************************
// EEPROM SAVE TYPES
// 1 = Acclaim Type 1 [24C02]
// 2 = Acclaim Type 2 [24C02/24C16/24C65]
// 3 = Capcom/SEGA [24C01]
// 4 = EA [24C01]
// 5 = Codemasters [24C08/24C16/24C65]
//***********************************************
byte eepType;
//*********************************************************
// SERIAL EEPROM LOOKUP TABLE
// Format = {chksum, eepType | eepSize}
// chksum is located in ROM at 0x18E (0xC7)
// eepType and eepSize are combined to conserve memory
//*********************************************************
static const word PROGMEM eepid [] = {
// ACCLAIM TYPE 1
0x5B9F, 0x101, // NBA Jam (J)
0x694F, 0x101, // NBA Jam (UE) (Rev 0)
0xBFA9, 0x101, // NBA Jam (UE) (Rev 1)
// ACCLAIM TYPE 2
0x16B2, 0x102, // Blockbuster World Videogame Championship II (U) [NO HEADER SAVE DATA]
0xCC3F, 0x102, // NBA Jam Tournament Edition (W) (Rev 0) [NO HEADER SAVE DATA]
0x8AE1, 0x102, // NBA Jam Tournament Edition (W) (Rev 1) [NO HEADER SAVE DATA]
0xDB97, 0x102, // NBA Jam Tournament Edition 32X (W)
0x7651, 0x102, // NFL Quarterback Club (W)
0xDFE4, 0x102, // NFL Quarterback Club 32X (W)
0x3DE6, 0x802, // NFL Quarterback Club '96 (UE)
0xCB78, 0x2002, // Frank Thomas Big Hurt Baseball (UE)
0x6DD9, 0x2002, // College Slam (U)
// CAPCOM
0xAD23, 0x83, // Mega Man: The Wily Wars (E)
0xEA80, 0x83, // Rockman Megaworld (J)
// SEGA
0x760F, 0x83, // Evander "Real Deal" Holyfield Boxing (JU)
0x95E7, 0x83, // Greatest Heavyweights of the Ring (E)
0x0000, 0x83, // Greatest Heavyweights of the Ring (J) [BLANK CHECKSUM 0000]
0x7270, 0x83, // Greatest Heavyweights of the Ring (U)
0xBACC, 0x83, // Honoo no Toukyuuji Dodge Danpei (J)
0xB939, 0x83, // MLBPA Sports Talk Baseball (U) [BAD HEADER SAVE DATA]
0x487C, 0x83, // Ninja Burai Densetsu (J)
0x740D, 0x83, // Wonder Boy in Monster World (B)
0x0278, 0x83, // Wonder Boy in Monster World (J)
0x9D79, 0x83, // Wonder Boy in Monster World (UE)
// EA
0x8512, 0x84, // Bill Walsh College Football (UE) [BAD HEADER SAVE DATA]
0xA107, 0x84, // John Madden Football '93 (UE) [NO HEADER SAVE DATA]
0x5807, 0x84, // John Madden Football '93 Championship Edition (U) [NO HEADER SAVE DATA]
0x2799, 0x84, // NHLPA Hockey '93 (UE) (Rev 0) [NO HEADER SAVE DATA]
0xFA57, 0x84, // NHLPA Hockey '93 (UE) (Rev 1) [NO HEADER SAVE DATA]
0x8B9F, 0x84, // Rings of Power (UE) [NO HEADER SAVE DATA]
// CODEMASTERS
0x7E65, 0x405, // Brian Lara Cricket (E) [NO HEADER SAVE DATA]
0x9A5C, 0x2005, // Brian Lara Cricket 96 (E) (Rev 1.0) [NO HEADER SAVE DATA]
0xC4EE, 0x2005, // Brian Lara Cricket 96 (E) (Rev 1.1) [NO HEADER SAVE DATA]
0x7E50, 0x805, // Micro Machines 2 (E) (J-Cart) [NO HEADER SAVE DATA]
0x165E, 0x805, // Micro Machines '96 (E) (J-Cart) (Rev 1.0/1.1) [NO HEADER SAVE DATA]
0x168B, 0x405, // Micro Machines Military (E) (J-Cart) [NO HEADER SAVE DATA]
0x12C1, 0x2005, // Shane Warne Cricket (E) [NO HEADER SAVE DATA]
};
byte eepcount = (sizeof(eepid) / sizeof(eepid[0])) / 2;
byte index;
word eepdata;
// CD BACKUP RAM
unsigned long bramSize = 0;
// REALTEC MAPPER
boolean realtec = 0;
2018-10-14 10:09:25 +02:00
/******************************************
Menu
*****************************************/
// MD menu items
static const char MDMenuItem1[] PROGMEM = "Game Cartridge";
static const char MDMenuItem2[] PROGMEM = "SegaCD RamCart";
static const char MDMenuItem3[] PROGMEM = "Flash Repro";
static const char MDMenuItem4[] PROGMEM = "Reset";
static const char* const menuOptionsMD[] PROGMEM = {MDMenuItem1, MDMenuItem2, MDMenuItem3, MDMenuItem4};
// Cart menu items
static const char MDCartMenuItem1[] PROGMEM = "Read Rom";
static const char MDCartMenuItem2[] PROGMEM = "Read Sram";
static const char MDCartMenuItem3[] PROGMEM = "Write Sram";
static const char MDCartMenuItem4[] PROGMEM = "Read EEPROM";
static const char MDCartMenuItem5[] PROGMEM = "Write EEPROM";
static const char MDCartMenuItem6[] PROGMEM = "Reset";
static const char* const menuOptionsMDCart[] PROGMEM = {MDCartMenuItem1, MDCartMenuItem2, MDCartMenuItem3, MDCartMenuItem4, MDCartMenuItem5, MDCartMenuItem6};
// Sega CD Ram Backup Cartridge menu items
static const char SCDMenuItem1[] PROGMEM = "Read Backup RAM";
static const char SCDMenuItem2[] PROGMEM = "Write Backup RAM";
static const char SCDMenuItem3[] PROGMEM = "Reset";
static const char* const menuOptionsSCD[] PROGMEM = {SCDMenuItem1, SCDMenuItem2, SCDMenuItem3};
2018-10-14 10:09:25 +02:00
// Sega start menu
void mdMenu() {
2019-09-02 18:34:25 +02:00
// create menu with title and 4 options to choose from
unsigned char mdDev;
// Copy menuOptions out of progmem
convertPgm(menuOptionsMD, 4);
mdDev = question_box(F("Select MD device"), menuOptions, 4, 0);
// wait for user choice to come back from the question box menu
switch (mdDev)
{
case 0:
display_Clear();
display_Update();
setup_MD();
mode = mode_MD_Cart;
break;
case 1:
display_Clear();
display_Update();
setup_MD();
mode = mode_SEGA_CD;
break;
case 2:
display_Clear();
display_Update();
setup_MD();
mode = mode_MD_Cart;
// Change working dir to root
filePath[0] = '\0';
sd.chdir("/");
fileBrowser(F("Select file"));
display_Clear();
// Setting CS(PH3) LOW
PORTH &= ~(1 << 3);
// ID flash
resetFlash_MD();
idFlash_MD();
resetFlash_MD();
print_Msg(F("Flash ID: "));
println_Msg(flashid);
if (strcmp(flashid, "C2F1") == 0) {
println_Msg(F("MX29F1610 detected"));
flashSize = 2097152;
}
else {
print_Error(F("Error: Unknown flashrom"), true);
}
display_Update();
eraseFlash_MD();
resetFlash_MD();
blankcheck_MD();
write29F1610_MD();
resetFlash_MD();
delay(1000);
resetFlash_MD();
delay(1000);
verifyFlash_MD();
// Set CS(PH3) HIGH
PORTH |= (1 << 3);
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
wait();
break;
case 3:
resetArduino();
break;
}
2018-10-14 10:09:25 +02:00
}
void mdCartMenu() {
2019-09-02 18:34:25 +02:00
// create menu with title and 6 options to choose from
2018-10-14 10:09:25 +02:00
unsigned char mainMenu;
// Copy menuOptions out of progmem
2019-09-02 18:34:25 +02:00
convertPgm(menuOptionsMDCart, 6);
2019-09-02 18:27:33 +02:00
mainMenu = question_box(F("MEGA DRIVE Reader"), menuOptions, 6, 0);
2018-10-14 10:09:25 +02:00
// wait for user choice to come back from the question box menu
switch (mainMenu)
{
case 0:
display_Clear();
// common ROM read fail state: no cart inserted - tends to report impossibly large cartSize
// largest known game so far is supposedly "Paprium" at 10MB, so cap sanity check at 16MB
if (cartSize != 0 && cartSize <= 16777216) {
// Change working dir to root
sd.chdir("/");
if (realtec)
readRealtec_MD();
else
readROM_MD();
//compare_checksum_MD();
}
else {
print_Error(F("Cart has no ROM"), false);
}
2018-10-14 10:09:25 +02:00
break;
case 1:
display_Clear();
// Does cartridge have SRAM
if ((saveType == 1) || (saveType == 2) || (saveType == 3)) {
2018-10-14 10:09:25 +02:00
// Change working dir to root
sd.chdir("/");
println_Msg(F("Reading Sram..."));
display_Update();
enableSram_MD(1);
readSram_MD();
enableSram_MD(0);
}
else {
print_Error(F("Cart has no Sram"), false);
}
break;
case 2:
display_Clear();
// Does cartridge have SRAM
if ((saveType == 1) || (saveType == 2) || (saveType == 3)) {
2018-10-14 10:09:25 +02:00
// Change working dir to root
sd.chdir("/");
// Launch file browser
fileBrowser(F("Select srm file"));
2018-10-14 10:09:25 +02:00
display_Clear();
enableSram_MD(1);
writeSram_MD();
writeErrors = verifySram_MD();
enableSram_MD(0);
if (writeErrors == 0) {
println_Msg(F("Sram verified OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(writeErrors);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
}
else {
print_Error(F("Cart has no Sram"), false);
}
break;
case 3:
display_Clear();
if (saveType == 4)
readEEP_MD();
else {
print_Error(F("Cart has no EEPROM"), false);
}
break;
case 4:
display_Clear();
if (saveType == 4) {
// Launch file browser
fileBrowser(F("Select eep file"));
display_Clear();
writeEEP_MD();
}
else {
print_Error(F("Cart has no EEPROM"), false);
}
break;
case 5:
// Reset
resetArduino();
break;
}
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
wait();
}
void segaCDMenu() {
// create menu with title and 3 options to choose from
unsigned char scdMenu;
// Copy menuOptions out of progmem
convertPgm(menuOptionsSCD, 3);
scdMenu = question_box(F("SEGA CD RAM"), menuOptions, 3, 0);
// wait for user choice to come back from the question box menu
switch (scdMenu)
{
case 0:
display_Clear();
if (bramSize > 0)
readBram_MD();
else {
print_Error(F("Not CD Backup RAM Cart"), false);
}
break;
case 1:
display_Clear();
if (bramSize > 0) {
// Launch file browser
fileBrowser(F("Select brm file"));
display_Clear();
writeBram_MD();
}
else {
print_Error(F("Not CD Backup RAM Cart"), false);
}
break;
case 2:
// Reset
asm volatile (" jmp 0");
break;
2018-10-14 10:09:25 +02:00
}
println_Msg(F(""));
println_Msg(F("Press Button..."));
display_Update();
wait();
}
/******************************************
Setup
*****************************************/
void setup_MD() {
// Set Address Pins to Output
//A0-A7
DDRF = 0xFF;
//A8-A15
DDRK = 0xFF;
//A16-A23
DDRL = 0xFF;
// Set Control Pins to Output RST(PH0) CLK(PH1) CS(PH3) WRH(PH4) WRL(PH5) OE(PH6)
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
2018-10-14 10:09:25 +02:00
// Set TIME(PJ0) to Output
DDRJ |= (1 << 0);
// Set Data Pins (D0-D15) to Input
DDRC = 0x00;
DDRA = 0x00;
// Setting RST(PH0) CLK(PH1) CS(PH3) WRH(PH4) WRL(PH5) OE(PH6) HIGH
PORTH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
2018-10-14 10:09:25 +02:00
// Setting TIME(PJ0) HIGH
PORTJ |= (1 << 0);
delay(200);
// Print all the info
getCartInfo_MD();
}
/******************************************
I/O Functions
*****************************************/
/******************************************
Low level functions
*****************************************/
void writeWord_MD(unsigned long myAddress, word myData) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t""nop\n\t");
// Switch WR(PH5) to LOW
PORTH &= ~(1 << 5);
// Setting CS(PH3) LOW
PORTH &= ~(1 << 3);
// Leave WR low for at least 200ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Setting CS(PH3) HIGH
PORTH |= (1 << 3);
// Switch WR(PH5) to HIGH
PORTH |= (1 << 5);
// Leave WR high for at least 50ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
word readWord_MD(unsigned long myAddress) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
NOP;
2018-10-14 10:09:25 +02:00
// Setting CS(PH3) LOW
PORTH &= ~(1 << 3);
// Setting OE(PH6) LOW
PORTH &= ~(1 << 6);
// most MD ROMs are 200ns, comparable to SNES > use similar access delay of 6 x 62.5 = 375ns
NOP; NOP; NOP; NOP; NOP; NOP;
2018-10-14 10:09:25 +02:00
// Read
word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF );
// Setting CS(PH3) HIGH
PORTH |= (1 << 3);
// Setting OE(PH6) HIGH
PORTH |= (1 << 6);
// these 6x nop delays have been here before, unknown what they mean
NOP; NOP; NOP; NOP; NOP; NOP;
2018-10-14 10:09:25 +02:00
return tempWord;
}
void writeFlash_MD(unsigned long myAddress, word myData) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t");
// Switch WE(PH5) to LOW
PORTH &= ~(1 << 5);
// Leave WE low for at least 60ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Switch WE(PH5)to HIGH
PORTH |= (1 << 5);
// Leave WE high for at least 50ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
word readFlash_MD(unsigned long myAddress) {
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
__asm__("nop\n\t");
// Setting OE(PH6) LOW
PORTH &= ~(1 << 6);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Read
word tempWord = ( ( PINA & 0xFF ) << 8 ) | ( PINC & 0xFF );
__asm__("nop\n\t");
// Setting OE(PH6) HIGH
PORTH |= (1 << 6);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
return tempWord;
}
2018-10-14 10:09:25 +02:00
// Switch data pins to write
void dataOut_MD() {
DDRC = 0xFF;
DDRA = 0xFF;
}
// Switch data pins to read
void dataIn_MD() {
DDRC = 0x00;
DDRA = 0x00;
}
/******************************************
MEGA DRIVE functions
*****************************************/
void getCartInfo_MD() {
// Set control
dataIn_MD();
cartSize = ((long(readWord_MD(0xD2)) << 16) | readWord_MD(0xD3)) + 1;
// Cart Checksum
chksum = readWord_MD(0xC7);
// Super Street Fighter 2 Check
if (cartSize == 0x400000) {
switch (chksum) {
case 0xCE25: // Super Street Fighter 2 (J) 40Mbit
case 0xE41D: // Super Street Fighter 2 (E) 40Mbit
case 0xE017: // Super Street Fighter 2 (U) 40Mbit
cartSize = 0x500000;
break;
}
}
2018-10-14 10:09:25 +02:00
// Serial EEPROM Check
for (int i = 0; i < eepcount; i++) {
index = i * 2;
word eepcheck = pgm_read_word(eepid + index);
if (eepcheck == chksum) {
eepdata = pgm_read_word(eepid + index + 1);
eepType = eepdata & 0x7;
eepSize = eepdata & 0xFFF8;
saveType = 4; // SERIAL EEPROM
break;
2018-10-14 10:09:25 +02:00
}
}
// Greatest Heavyweights of the Ring (J) has blank chksum 0x0000
// Other non-save carts might have the same blank chksum
// Check header for Serial EEPROM Data
if (chksum == 0x0000) {
if (readWord_MD(0xD9) != 0xE840) { // NOT SERIAL EEPROM
eepType = 0;
eepSize = 0;
saveType = 0;
}
}
// Codemasters EEPROM Check
// Codemasters used the same incorrect header across multiple carts
// Carts with checksum 0x165E or 0x168B could be EEPROM or non-EEPROM
// Check the first DWORD in ROM (0x444E4C44) to identify the EEPROM carts
if ((chksum == 0x165E) || (chksum == 0x168B)) {
if (readWord_MD(0x00) != 0x444E) { // NOT SERIAL EEPROM
eepType = 0;
eepSize = 0;
saveType = 0;
}
}
// CD Backup RAM Cart Check
// 4 = 128KB (2045 Blocks) Sega CD Backup RAM Cart
// 6 = 512KB (8189 Blocks) Ultra CD Backup RAM Cart (Aftermarket)
word bramCheck = readWord_MD(0x00);
if (((bramCheck == 0x0004) && (chksum == 0x0004)) || ((bramCheck == 0x0006) && (chksum == 0x0006)))
bramSize = pow(2, bramCheck) * 0x2000;
if (saveType != 4) { // NOT SERIAL EEPROM
// Check if cart has sram
2018-10-14 10:09:25 +02:00
saveType = 0;
sramSize = 0;
// FIXED CODE FOR SRAM/FRAM/PARALLEL EEPROM
// 0x5241F820 SRAM (ODD BYTES/EVEN BYTES)
// 0x5241F840 PARALLEL EEPROM - READ AS SRAM
// 0x5241E020 SRAM (BOTH BYTES)
if (readWord_MD(0xD8) == 0x5241) {
word sramType = readWord_MD(0xD9);
if ((sramType == 0xF820) || (sramType == 0xF840)) { // SRAM/FRAM ODD/EVEN BYTES
// Get sram start and end
sramBase = ((long(readWord_MD(0xDA)) << 16) | readWord_MD(0xDB));
sramEnd = ((long(readWord_MD(0xDC)) << 16) | readWord_MD(0xDD));
// Check alignment of sram
if ((sramBase == 0x200001) || (sramBase == 0x300001)) { // ADDED 0x300001 FOR HARDBALL '95 (U)
// low byte
saveType = 1; // ODD
sramSize = (sramEnd - sramBase + 2) / 2;
// Right shift sram base address so [A21] is set to high 0x200000 = 0b001[0]00000000000000000000
sramBase = sramBase >> 1;
}
else if (sramBase == 0x200000) {
// high byte
saveType = 2; // EVEN
sramSize = (sramEnd - sramBase + 1) / 2;
// Right shift sram base address so [A21] is set to high 0x200000 = 0b001[0]00000000000000000000
sramBase = sramBase / 2;
}
else
print_Error(F("Unknown Sram Base"), true);
}
else if (sramType == 0xE020) { // SRAM BOTH BYTES
// Get sram start and end
sramBase = ((long(readWord_MD(0xDA)) << 16) | readWord_MD(0xDB));
sramEnd = ((long(readWord_MD(0xDC)) << 16) | readWord_MD(0xDD));
if (sramBase == 0x200001) {
saveType = 3; // BOTH
sramSize = sramEnd - sramBase + 2;
sramBase = sramBase >> 1;
}
else if (sramBase == 0x200000) {
saveType = 3; // BOTH
sramSize = sramEnd - sramBase + 1;
sramBase = sramBase >> 1;
}
else
print_Error(F("Unknown Sram Base"), true);
}
}
else {
// SRAM CARTS WITH BAD/MISSING HEADER SAVE DATA
switch (chksum) {
case 0xC2DB: // Winter Challenge (UE)
saveType = 1; // ODD
sramBase = 0x200001;
sramEnd = 0x200FFF;
break;
case 0xD7B6: // Buck Rogers: Countdown to Doomsday (UE)
case 0xFE3E: // NBA Live '98 (U)
case 0xFDAD: // NFL '94 starring Joe Montana (U)
case 0x632E: // PGA Tour Golf (UE) (Rev 1)
case 0xD2BA: // PGA Tour Golf (UE) (Rev 2)
case 0x44FE: // Super Hydlide (J)
saveType = 1; // ODD
sramBase = 0x200001;
sramEnd = 0x203FFF;
break;
case 0xDB5E: // Might & Magic: Gates to Another World (UE) (Rev 1)
case 0x3428: // Starflight (UE) (Rev 0)
case 0x43EE: // Starflight (UE) (Rev 1)
saveType = 3; // BOTH
sramBase = 0x200001;
sramEnd = 0x207FFF;
break;
case 0xBF72: // College Football USA '96 (U)
case 0x72EF: // FIFA Soccer '97 (UE)
case 0xD723: // Hardball III (U)
case 0x06C1: // Madden NFL '98 (U)
case 0xDB17: // NHL '96 (UE)
case 0x5B3A: // NHL '98 (U)
case 0x2CF2: // NFL Sports Talk Football '93 starring Joe Montana (UE)
case 0xE9B1: // Summer Challenge (U)
case 0xEEE8: // Test Drive II: The Duel (U)
saveType = 1; // ODD
sramBase = 0x200001;
sramEnd = 0x20FFFF;
break;
}
if (saveType == 1) {
sramSize = (sramEnd - sramBase + 2) / 2;
sramBase = sramBase >> 1;
}
else if (saveType == 3) {
sramSize = sramEnd - sramBase + 2;
sramBase = sramBase >> 1;
}
}
2018-10-14 10:09:25 +02:00
}
// Get name
for (byte c = 0; c < 48; c += 2) {
// split word
word myWord = readWord_MD((0x150 + c) / 2);
byte loByte = myWord & 0xFF;
byte hiByte = myWord >> 8;
// write to buffer
sdBuffer[c] = hiByte;
sdBuffer[c + 1] = loByte;
}
byte myLength = 0;
for (unsigned int i = 0; i < 48; i++) {
if (((char(sdBuffer[i]) >= 48 && char(sdBuffer[i]) <= 57) || (char(sdBuffer[i]) >= 65 && char(sdBuffer[i]) <= 122)) && myLength < 15) {
romName[myLength] = char(sdBuffer[i]);
myLength++;
}
}
// Realtec Mapper Check
word realtecCheck1 = readWord_MD(0x3F080); // 0x7E100 "SEGA" (BootROM starts at 0x7E000)
word realtecCheck2 = readWord_MD(0x3F081);
if ((realtecCheck1 == 0x5345) && (realtecCheck2 == 0x4741)) {
realtec = 1;
strcpy(romName, "Realtec");
cartSize = 0x80000;
}
2018-10-14 10:09:25 +02:00
display_Clear();
println_Msg(F("Cart Info"));
println_Msg(F(" "));
print_Msg(F("Name: "));
println_Msg(romName);
print_Msg(F("Size: "));
print_Msg(cartSize * 8 / 1024 / 1024 );
println_Msg(F(" MBit"));
print_Msg(F("ChkS: "));
print_Msg((chksum >> 8), HEX);
print_Msg((chksum & 0x00ff), HEX);
println_Msg(F(""));
if (saveType == 4) {
print_Msg(F("Serial EEPROM: "));
print_Msg(eepSize * 8 / 1024);
2018-10-14 10:09:25 +02:00
println_Msg(F(" KBit"));
}
else {
print_Msg(F("Sram: "));
if (sramSize > 0) {
print_Msg(sramSize * 8 / 1024);
println_Msg(F(" KBit"));
}
else
println_Msg(F("None"));
}
2018-10-14 10:09:25 +02:00
println_Msg(F(" "));
// Wait for user input
#ifdef enable_OLED
println_Msg(F("Press Button..."));
display_Update();
wait();
#endif
2018-10-14 10:09:25 +02:00
}
void writeSSF2Map(unsigned long myAddress, word myData) {
dataOut_MD();
// Set TIME(PJ0) HIGH
PORTJ |= (1 << 0);
// 0x50987E * 2 = 0xA130FD Bank 6 (0x300000-0x37FFFF)
// 0x50987F * 2 = 0xA130FF Bank 7 (0x380000-0x3FFFFF)
PORTL = (myAddress >> 16) & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTF = myAddress & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t""nop\n\t");
// Strobe TIME(PJ0) LOW to latch the data
PORTJ &= ~(1 << 0);
// Switch WR(PH5) to LOW
PORTH &= ~(1 << 5);
// Leave WR low for at least 200ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Switch WR(PH5) to HIGH
PORTH |= (1 << 5);
// Set TIME(PJ0) HIGH
PORTJ |= (1 << 0);
dataIn_MD();
}
2018-10-14 10:09:25 +02:00
// Read rom and save to the SD card
void readROM_MD() {
// Checksum
uint16_t calcCKS = 0;
2018-10-14 10:09:25 +02:00
// Set control
dataIn_MD();
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".MD");
// create a new folder
EEPROM_readAnything(0, foldern);
2018-10-14 10:09:25 +02:00
sprintf(folder, "MD/ROM/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
display_Clear();
print_Msg(F("Saving to "));
print_Msg(folder);
println_Msg(F("/..."));
display_Update();
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
2018-10-14 10:09:25 +02:00
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
byte buffer[1024] = { 0 };
// get current time
unsigned long startTime = millis();
// Prepare SSF2 Banks
if (cartSize > 0x400000) {
writeSSF2Map(0x50987E, 6); // 0xA130FD
writeSSF2Map(0x50987F, 7); // 0xA130FF
}
byte offsetSSF2Bank = 0;
2018-10-14 10:09:25 +02:00
word d = 0;
//Initialize progress bar
uint32_t processedProgressBar = 0;
uint32_t totalProgressBar = (uint32_t)(cartSize);
draw_progressbar(0, totalProgressBar);
for (unsigned long currBuffer = 0; currBuffer < cartSize / 2; currBuffer += 512) {
2018-10-14 10:09:25 +02:00
// Blink led
if (currBuffer % 16384 == 0)
PORTB ^= (1 << 4);
if (currBuffer == 0x200000) {
writeSSF2Map(0x50987E, 8); // 0xA130FD
offsetSSF2Bank = 1;
}
else if (currBuffer == 0x240000) {
writeSSF2Map(0x50987F, 9); // 0xA130FF
offsetSSF2Bank = 1;
}
d = 0;
for (int currWord = 0; currWord < 512; currWord++) {
unsigned long myAddress = currBuffer + currWord - (offsetSSF2Bank * 0x80000);
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
NOP;
// Setting CS(PH3) LOW
PORTH &= ~(1 << 3);
// Setting OE(PH6) LOW
PORTH &= ~(1 << 6);
// most MD ROMs are 200ns, comparable to SNES > use similar access delay of 6 x 62.5 = 375ns
NOP; NOP; NOP; NOP; NOP; NOP;
// Read
buffer[d] = PINA;
buffer[d + 1] = PINC;
// Setting CS(PH3) HIGH
PORTH |= (1 << 3);
// Setting OE(PH6) HIGH
PORTH |= (1 << 6);
// Skip first 256 words
if (((currBuffer == 0) && (currWord >= 256)) || (currBuffer > 0)) {
calcCKS += ((buffer[d] << 8) | buffer[d + 1]);
}
2018-10-14 10:09:25 +02:00
d += 2;
}
myFile.write(buffer, 1024);
// update progress bar
processedProgressBar += 1024;
draw_progressbar(processedProgressBar, totalProgressBar);
2018-10-14 10:09:25 +02:00
}
// Close the file:
myFile.close();
// Reset SSF2 Banks
if (cartSize > 0x400000) {
writeSSF2Map(0x50987E, 6); // 0xA130FD
writeSSF2Map(0x50987F, 7); // 0xA130FF
}
// print elapsed time
print_Msg(F("Time elapsed: "));
print_Msg((millis() - startTime) / 1000);
println_Msg(F("s"));
display_Update();
// print Checksum
if (chksum == calcCKS) {
println_Msg(F("Checksum OK"));
display_Update();
}
else {
print_Msg(F("Checksum Error: "));
char calcsumStr[5];
sprintf(calcsumStr, "%04X", calcCKS);
println_Msg(calcsumStr);
print_Error(F(""), false);
display_Update();
}
2018-10-14 10:09:25 +02:00
}
/******************************************
SRAM functions
*****************************************/
// Sonic 3 sram enable
void enableSram_MD(boolean enableSram) {
dataOut_MD();
// Set D0 to either 1(enable SRAM) or 0(enable ROM)
PORTC = enableSram;
// Strobe TIME(PJ0) LOW to latch the data
PORTJ &= ~(1 << 0);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Set TIME(PJ0) HIGH
PORTJ |= (1 << 0);
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
dataIn_MD();
}
// Write sram to cartridge
void writeSram_MD() {
dataOut_MD();
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Write to the lower byte
if (saveType == 1) {
for (unsigned long currByte = sramBase; currByte < sramBase + sramSize; currByte++) {
writeWord_MD(currByte, (myFile.read() & 0xFF));
}
}
// Write to the upper byte
else if (saveType == 2) {
for (unsigned long currByte = sramBase; currByte < sramBase + sramSize; currByte++) {
writeWord_MD(currByte, ((myFile.read() << 8 ) & 0xFF));
}
}
else
print_Error(F("Unknown save type"), false);
// Close the file:
myFile.close();
println_Msg(F("Done"));
display_Update();
}
else {
print_Error(F("SD Error"), true);
}
dataIn_MD();
}
// Read sram and save to the SD card
void readSram_MD() {
dataIn_MD();
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".srm");
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
2018-10-14 10:09:25 +02:00
sprintf(folder, "MD/SAVE/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
2018-10-14 10:09:25 +02:00
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
for (unsigned long currBuffer = sramBase; currBuffer < sramBase + sramSize; currBuffer += 256) {
for (int currWord = 0; currWord < 256; currWord++) {
2018-10-14 10:09:25 +02:00
word myWord = readWord_MD(currBuffer + currWord);
if (saveType == 2) {
// Only use the upper byte
sdBuffer[currWord] = (( myWord >> 8 ) & 0xFF);
}
else if (saveType == 1) {
// Only use the lower byte
sdBuffer[currWord] = (myWord & 0xFF);
}
else { // saveType == 3 (BOTH)
sdBuffer[currWord * 2] = (( myWord >> 8 ) & 0xFF);
sdBuffer[(currWord * 2) + 1] = (myWord & 0xFF);
}
2018-10-14 10:09:25 +02:00
}
if (saveType == 3)
myFile.write(sdBuffer, 512);
else
myFile.write(sdBuffer, 256);
2018-10-14 10:09:25 +02:00
}
// Close the file:
myFile.close();
print_Msg(F("Saved to "));
print_Msg(folder);
println_Msg(F("/"));
display_Update();
}
unsigned long verifySram_MD() {
dataIn_MD();
writeErrors = 0;
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
for (unsigned long currBuffer = sramBase; currBuffer < sramBase + sramSize; currBuffer += 512) {
for (int currWord = 0; currWord < 512; currWord++) {
word myWord = readWord_MD(currBuffer + currWord);
if (saveType == 2) {
// Only use the upper byte
sdBuffer[currWord] = (( myWord >> 8 ) & 0xFF);
}
else if (saveType == 1) {
// Only use the lower byte
sdBuffer[currWord] = (myWord & 0xFF);
}
}
// Check sdBuffer content against file on sd card
for (int i = 0; i < 512; i++) {
if (myFile.read() != sdBuffer[i]) {
writeErrors++;
}
}
}
// Close the file:
myFile.close();
}
else {
print_Error(F("SD Error"), true);
}
// Return 0 if verified ok, or number of errors
return writeErrors;
}
//******************************************
// Flashrom Functions
//******************************************
void resetFlash_MD() {
// Set data pins to output
dataOut_MD();
// Reset command sequence
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0xf0);
// Set data pins to input again
dataIn_MD();
}
void write29F1610_MD() {
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
print_Msg(F("Flashing file "));
print_Msg(filePath);
println_Msg(F("..."));
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize) {
print_Error(F("File size exceeds flash size."), true);
}
// Set data pins to output
dataOut_MD();
// Fill sdBuffer with 1 page at a time then write it repeat until all bytes are written
int d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 64) {
myFile.read(sdBuffer, 128);
// Blink led
if (currByte % 4096 == 0) {
PORTB ^= (1 << 4);
}
// Write command sequence
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0xa0);
// Write one full page at a time
for (byte c = 0; c < 64; c++) {
word currWord = ( ( sdBuffer[d] & 0xFF ) << 8 ) | ( sdBuffer[d + 1] & 0xFF );
writeFlash_MD(currByte + c, currWord);
d += 2;
}
d = 0;
// Check if write is complete
delayMicroseconds(100);
busyCheck_MD();
}
// Set data pins to input again
dataIn_MD();
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file"));
display_Update();
}
}
void idFlash_MD() {
// Set data pins to output
dataOut_MD();
// ID command sequence
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0x90);
// Set data pins to input again
dataIn_MD();
// Read the two id bytes into a string
sprintf(flashid, "%02X%02X", readFlash_MD(0) & 0xFF, readFlash_MD(1) & 0xFF);
}
byte readStatusReg_MD() {
// Set data pins to output
dataOut_MD();
// Status reg command sequence
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0x70);
// Set data pins to input again
dataIn_MD();
// Read the status register
byte statusReg = readFlash_MD(0);
return statusReg;
}
void eraseFlash_MD() {
// Set data pins to output
dataOut_MD();
// Erase command sequence
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0x80);
writeFlash_MD(0x5555, 0xaa);
writeFlash_MD(0x2aaa, 0x55);
writeFlash_MD(0x5555, 0x10);
// Set data pins to input again
dataIn_MD();
busyCheck_MD();
}
void blankcheck_MD() {
blank = 1;
for (unsigned long currByte = 0; currByte < flashSize / 2; currByte++) {
if (readFlash_MD(currByte) != 0xFFFF) {
currByte = flashSize / 2;
blank = 0;
}
if (currByte % 4096 == 0) {
PORTB ^= (1 << 4);
}
}
if (!blank) {
print_Error(F("Error: Not blank"), false);
}
}
void verifyFlash_MD() {
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// Get rom size from file
fileSize = myFile.fileSize();
if (fileSize > flashSize) {
print_Error(F("File size exceeds flash size."), true);
}
blank = 0;
word d = 0;
for (unsigned long currByte = 0; currByte < fileSize / 2; currByte += 256) {
if (currByte % 4096 == 0) {
PORTB ^= (1 << 4);
}
//fill sdBuffer
myFile.read(sdBuffer, 512);
for (int c = 0; c < 256; c++) {
word currWord = ((sdBuffer[d] << 8) | sdBuffer[d + 1]);
if (readFlash_MD(currByte + c) != currWord) {
blank++;
}
d += 2;
}
d = 0;
}
if (blank == 0) {
println_Msg(F("Flashrom verified OK"));
display_Update();
}
else {
print_Msg(F("Error: "));
print_Msg(blank);
println_Msg(F(" bytes "));
print_Error(F("did not verify."), false);
}
// Close the file:
myFile.close();
}
else {
println_Msg(F("Can't open file"));
display_Update();
}
}
// Delay between write operations based on status register
void busyCheck_MD() {
// Set data pins to input
dataIn_MD();
// Read the status register
word statusReg = readFlash_MD(0);
while ((statusReg | 0xFF7F) != 0xFFFF) {
statusReg = readFlash_MD(0);
}
// Set data pins to output
dataOut_MD();
}
//******************************************
// EEPROM Functions
//******************************************
void EepromInit(byte eepmode) { // Acclaim Type 2
PORTF = 0x00; // ADDR A0-A7
PORTK = 0x00; // ADDR A8-A15
PORTL = 0x10; // ADDR A16-A23
PORTA = 0x00; // DATA D8-D15
PORTH |= (1 << 0); // /RES HIGH
PORTC = eepmode; // EEPROM Switch: 0 = Enable (Read EEPROM), 1 = Disable (Read ROM)
PORTH &= ~(1 << 3); // CE LOW
PORTH &= ~(1 << 4) & ~(1 << 5); // /UDSW + /LDSW LOW
PORTH |= (1 << 6); // OE HIGH
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
PORTH |= (1 << 4) | (1 << 5); // /UDSW + /LDSW HIGH
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
void writeWord_SDA(unsigned long myAddress, word myData) { /* D0 goes to /SDA when only /LWR is asserted */
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTH &= ~(1 << 3); // CE LOW
PORTH &= ~(1 << 5); // /LDSW LOW
PORTH |= (1 << 4); // /UDSW HIGH
PORTH |= (1 << 6); // OE HIGH
if (eepSize > 0x100)
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
else
delayMicroseconds(100);
PORTH |= (1 << 5); // /LDSW HIGH
if (eepSize > 0x100)
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
else
delayMicroseconds(100);
}
void writeWord_SCL(unsigned long myAddress, word myData) { /* D0 goes to /SCL when only /UWR is asserted */
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTH &= ~(1 << 3); // CE LOW
PORTH &= ~(1 << 4); // /UDSW LOW
PORTH |= (1 << 5); // /LDSW HIGH
PORTH |= (1 << 6); // OE HIGH
if (eepSize > 0x100)
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
else
delayMicroseconds(100);
PORTH |= (1 << 4); // /UDSW HIGH
if (eepSize > 0x100)
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
else
delayMicroseconds(100);
}
void writeWord_CM(unsigned long myAddress, word myData) { // Codemasters
PORTF = myAddress & 0xFF;
PORTK = (myAddress >> 8) & 0xFF;
PORTL = (myAddress >> 16) & 0xFF;
PORTC = myData;
PORTA = (myData >> 8) & 0xFF;
// Arduino running at 16Mhz -> one nop = 62.5ns
// Wait till output is stable
__asm__("nop\n\t""nop\n\t");
// Switch WR(PH4) to LOW
PORTH &= ~(1 << 4);
// Setting CS(PH3) LOW
PORTH &= ~(1 << 3);
// Pulse CLK(PH1)
PORTH ^= (1 << 1);
// Leave WR low for at least 200ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
// Pulse CLK(PH1)
PORTH ^= (1 << 1);
// Setting CS(PH3) HIGH
PORTH |= (1 << 3);
// Switch WR(PH4) to HIGH
PORTH |= (1 << 4);
// Leave WR high for at least 50ns
__asm__("nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t""nop\n\t");
}
// EEPROM COMMANDS
void EepromStart() {
if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0xC0); // sda, scl high
writeWord_MD(0x100000, 0x40); // sda low, scl high
writeWord_MD(0x100000, 0x00); // START
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x00); // sda low, scl low
writeWord_CM(0x180000, 0x02); // sda low, scl high
writeWord_CM(0x180000, 0x03); // sda, scl high
writeWord_CM(0x180000, 0x02); // sda low, scl high
writeWord_CM(0x180000, 0x00); // START
}
else {
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0x03); // sda, scl high
writeWord_MD(0x100000, 0x02); // sda low, scl high
writeWord_MD(0x100000, 0x00); // START
}
}
void EepromSet0() {
if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0x40); // sda low, scl high // 0
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x00); // sda low, scl low
writeWord_CM(0x180000, 0x02); // sda low, scl high // 0
writeWord_CM(0x180000, 0x00); // sda low, scl low
}
else {
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0x02); // sda low, scl high // 0
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
}
void EepromSet1() {
if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x00); // scl low
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0xC0); // sda high, scl high // 1
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x03); // sda high, scl high // 1
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x00); // sda low, scl low
}
else {
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x03); // sda high, scl high // 1
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
}
void EepromDevice() { // 24C02+
EepromSet1();
EepromSet0();
EepromSet1();
EepromSet0();
}
void EepromSetDeviceAddress(word addrhi) { // 24C02+
for (int i = 0; i < 3; i++) {
if ((addrhi >> 2) & 0x1) // Bit is HIGH
EepromSet1();
else // Bit is LOW
EepromSet0();
addrhi <<= 1; // rotate to the next bit
}
}
void EepromStatus() { // ACK
byte eepStatus = 1;
if (eepType == 1) { // Acclaim Type 1
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x03); // sda high, scl high
do {
dataIn_MD();
eepStatus = ((readWord_MD(0x100000) >> 1) & 0x1);
dataOut_MD();
delayMicroseconds(4);
}
while (eepStatus == 1);
writeWord_MD(0x100000, 0x01); // sda high, scl low
}
else if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
do {
dataIn_MD();
eepStatus = (readWord_MD(0x100000) & 0x1);
dataOut_MD();
delayMicroseconds(4);
}
while (eepStatus == 1);
writeWord_SCL(0x100000, 0x00); // scl low
}
else if (eepType == 3) { // Capcom/Sega
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x03); // sda high, scl high
do {
dataIn_MD();
eepStatus = (readWord_MD(0x100000) & 0x1);
dataOut_MD();
delayMicroseconds(4);
}
while (eepStatus == 1);
writeWord_MD(0x100000, 0x01); // sda high, scl low
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0xC0); // sda high, scl high
do {
dataIn_MD();
eepStatus = ((readWord_MD(0x100000) >> 7) & 0x1);
dataOut_MD();
delayMicroseconds(4);
}
while (eepStatus == 1);
writeWord_MD(0x100000, 0x80); // sda high, scl low
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x03); // sda high, scl high
do {
dataIn_MD();
eepStatus = ((readWord_MD(0x1C0000) >> 7) & 0x1);
dataOut_MD();
delayMicroseconds(4);
}
while (eepStatus == 1);
writeWord_CM(0x180000, 0x01); // sda high, scl low
}
}
void EepromReadMode() {
EepromSet1(); // READ
EepromStatus(); // ACK
}
void EepromWriteMode() {
EepromSet0(); // WRITE
EepromStatus(); // ACK
}
void EepromReadData() {
if (eepType == 1) { // Acclaim Type 1
for (int i = 0; i < 8; i++) {
writeWord_MD(0x100000, 0x03); // sda high, scl high
dataIn_MD();
eepbit[i] = ((readWord_MD(0x100000) >> 1) & 0x1); // Read 0x100000 with Mask 0x1 (bit 1)
dataOut_MD();
writeWord_MD(0x100000, 0x01); // sda high, scl low
}
}
else if (eepType == 2) { // Acclaim Type 2
for (int i = 0; i < 8; i++) {
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
dataIn_MD();
eepbit[i] = (readWord_MD(0x100000) & 0x1); // Read 0x100000 with Mask 0x1 (bit 0)
dataOut_MD();
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x00); // scl low
}
}
else if (eepType == 3) { // Capcom/Sega
for (int i = 0; i < 8; i++) {
writeWord_MD(0x100000, 0x03); // sda high, scl high
dataIn_MD();
eepbit[i] = (readWord_MD(0x100000) & 0x1); // Read 0x100000 with Mask 0x1 (bit 0)
dataOut_MD();
writeWord_MD(0x100000, 0x01); // sda high, scl low
}
}
else if (eepType == 4) { // EA
for (int i = 0; i < 8; i++) {
writeWord_MD(0x100000, 0xC0); // sda high, scl high
dataIn_MD();
eepbit[i] = ((readWord_MD(0x100000) >> 7) & 0x1); // Read 0x100000 with Mask (bit 7)
dataOut_MD();
writeWord_MD(0x100000, 0x80); // sda high, scl low
}
}
else if (eepType == 5) { // Codemasters
for (int i = 0; i < 8; i++) {
writeWord_CM(0x180000, 0x03); // sda high, scl high
dataIn_MD();
eepbit[i] = ((readWord_MD(0x1C0000) >> 7) & 0x1); // Read 0x1C0000 with Mask 0x1 (bit 7)
dataOut_MD();
writeWord_CM(0x180000, 0x01); // sda high, scl low
}
}
}
void EepromWriteData(byte data) {
for (int i = 0; i < 8; i++) {
if ((data >> 7) & 0x1) // Bit is HIGH
EepromSet1();
else // Bit is LOW
EepromSet0();
data <<= 1; // rotate to the next bit
}
EepromStatus(); // ACK
}
void EepromFinish() {
if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x00); // scl low
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x00); // scl low
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0xC0); // sda high, scl high
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x00); // sda low, scl low
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x03); // sda high, scl high
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x00); // sda low, scl low
}
else {
writeWord_MD(0x100000, 0x00); // sda low, scl low
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x03); // sda high, scl high
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x00); // sda low, scl low
}
}
void EepromStop() {
if (eepType == 2) { // Acclaim Type 2
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x01); // scl high
writeWord_SDA(0x100000, 0x01); // sda high
writeWord_SCL(0x100000, 0x00); // scl low
writeWord_SDA(0x100000, 0x00); // sda low
writeWord_SCL(0x100000, 0x00); // scl low // STOP
}
else if (eepType == 4) { // EA
writeWord_MD(0x100000, 0x00); // sda, scl low
writeWord_MD(0x100000, 0x40); // sda low, scl high
writeWord_MD(0x100000, 0xC0); // sda, scl high
writeWord_MD(0x100000, 0x80); // sda high, scl low
writeWord_MD(0x100000, 0x00); // STOP
}
else if (eepType == 5) { // Codemasters
writeWord_CM(0x180000, 0x00); // sda low, scl low
writeWord_CM(0x180000, 0x02); // sda low, scl high
writeWord_CM(0x180000, 0x03); // sda, scl high
writeWord_CM(0x180000, 0x01); // sda high, scl low
writeWord_CM(0x180000, 0x00); // STOP
}
else {
writeWord_MD(0x100000, 0x00); // sda, scl low
writeWord_MD(0x100000, 0x02); // sda low, scl high
writeWord_MD(0x100000, 0x03); // sda, scl high
writeWord_MD(0x100000, 0x01); // sda high, scl low
writeWord_MD(0x100000, 0x00); // STOP
}
}
void EepromSetAddress(word address) {
if (eepSize > 0x80) { // 24C02+
for (int i = 0; i < 8; i++) {
if ((address >> 7) & 0x1) // Bit is HIGH
EepromSet1();
else // Bit is LOW
EepromSet0();
address <<= 1; // rotate to the next bit
}
EepromStatus(); // ACK
}
else { // 24C01
for (int i = 0; i < 7; i++) {
if ((address >> 6) & 0x1) // Bit is HIGH
EepromSet1();
else // Bit is LOW
EepromSet0();
address <<= 1; // rotate to the next bit
}
}
}
void readEepromByte(word address) {
addrhi = address >> 8;
addrlo = address & 0xFF;
dataOut_MD();
if (eepType == 2)
EepromInit(0); // Enable EEPROM
EepromStart(); // START
if (eepSize > 0x80) {
EepromDevice(); // DEVICE [1010]
if (eepSize > 0x800) { // MODE 3 [24C65]
EepromSetDeviceAddress(0);
EepromWriteMode();
EepromSetAddress(addrhi); // ADDR [A15..A8]
}
else { // MODE 2 [24C02/24C08/24C16]
EepromSetDeviceAddress(addrhi); // ADDR [A10..A8]
EepromWriteMode();
}
}
EepromSetAddress(addrlo);
if (eepSize > 0x80) {
EepromStart(); // START
EepromDevice(); // DEVICE [1010]
if (eepSize > 0x800) // MODE 3 [24C65]
EepromSetDeviceAddress(0);
else // MODE 2 [24C02/24C08/24C16]
EepromSetDeviceAddress(addrhi); // ADDR [A10..A8]
}
EepromReadMode();
EepromReadData();
EepromFinish();
EepromStop(); // STOP
if (eepType == 2)
EepromInit(1); // Disable EEPROM
// OR 8 bits into byte
eeptemp = eepbit[0] << 7 | eepbit[1] << 6 | eepbit[2] << 5 | eepbit[3] << 4 | eepbit[4] << 3 | eepbit[5] << 2 | eepbit[6] << 1 | eepbit[7];
sdBuffer[addrlo] = eeptemp;
}
void writeEepromByte(word address) {
addrhi = address >> 8;
addrlo = address & 0xFF;
eeptemp = sdBuffer[addrlo];
dataOut_MD();
if (eepType == 2)
EepromInit(0); // Enable EEPROM
EepromStart(); // START
if (eepSize > 0x80) {
EepromDevice(); // DEVICE [1010]
if (eepSize > 0x800) { // MODE 3 [24C65]
EepromSetDeviceAddress(0); // [A2-A0] = 000
EepromWriteMode(); // WRITE
EepromSetAddress(addrhi); // ADDR [A15-A8]
}
else { // MODE 2 [24C02/24C08/24C16]
EepromSetDeviceAddress(addrhi); // ADDR [A10-A8]
EepromWriteMode(); // WRITE
}
EepromSetAddress(addrlo);
}
else { // 24C01
EepromSetAddress(addrlo);
EepromWriteMode(); // WRITE
}
EepromWriteData(eeptemp);
EepromStop(); // STOP
if (eepType == 2)
EepromInit(1); // Disable EEPROM
}
// Read EEPROM and save to the SD card
void readEEP_MD() {
dataIn_MD();
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".eep");
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
sd.chdir();
sprintf(folder, "MD/SAVE/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
println_Msg(F("Reading..."));
display_Update();
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
if (eepSize > 0x100) { // 24C04+
for (word currByte = 0; currByte < eepSize; currByte += 256) {
print_Msg(F("*"));
display_Update();
for (int i = 0; i < 256; i++) {
readEepromByte(currByte + i);
}
myFile.write(sdBuffer, 256);
}
}
else { // 24C01/24C02
for (word currByte = 0; currByte < eepSize; currByte++) {
if ((currByte != 0) && ((currByte + 1) % 16 == 0)) {
print_Msg(F("*"));
display_Update();
}
readEepromByte(currByte);
}
myFile.write(sdBuffer, eepSize);
}
// Close the file:
myFile.close();
println_Msg(F(""));
display_Clear();
print_Msg(F("Saved to "));
print_Msg(folder);
display_Update();
}
void writeEEP_MD() {
dataOut_MD();
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
if (eepSize > 0x100) { // 24C04+
for (word currByte = 0; currByte < eepSize; currByte += 256) {
myFile.read(sdBuffer, 256);
for (int i = 0; i < 256; i++) {
writeEepromByte(currByte + i);
delay(50); // DELAY NEEDED
}
print_Msg(F("."));
display_Update();
}
}
else { // 24C01/24C02
myFile.read(sdBuffer, eepSize);
for (word currByte = 0; currByte < eepSize; currByte++) {
writeEepromByte(currByte);
print_Msg(F("."));
if ((currByte != 0) && ((currByte + 1) % 64 == 0))
println_Msg(F(""));
display_Update(); // ON SERIAL = delay(100)
}
}
// Close the file:
myFile.close();
println_Msg(F(""));
display_Clear();
println_Msg(F("Done"));
display_Update();
}
else {
print_Error(F("SD Error"), true);
}
dataIn_MD();
}
//******************************************
// CD Backup RAM Functions
//******************************************
void readBram_MD() {
dataIn_MD();
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, "Cart.brm");
// create a new folder for the save file
EEPROM_readAnything(0, foldern);
sd.chdir();
sprintf(folder, "MD/RAM/%d", foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(0, foldern);
println_Msg(F("Reading..."));
display_Update();
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
for (unsigned long currByte = 0; currByte < bramSize; currByte += 512) {
for (int i = 0; i < 512; i++) {
sdBuffer[i] = readWord_MD(0x300000 + currByte + i);
}
myFile.write(sdBuffer, 512);
}
// Close the file:
myFile.close();
println_Msg(F(""));
display_Clear();
print_Msg(F("Saved to "));
print_Msg(folder);
display_Update();
}
void writeBram_MD() {
dataOut_MD();
// Create filepath
sprintf(filePath, "%s/%s", filePath, fileName);
println_Msg(F("Writing..."));
println_Msg(filePath);
display_Update();
// Open file on sd card
if (myFile.open(filePath, O_READ)) {
// 0x700000-0x7FFFFF: Writes by /LWR latch D0; 1=RAM write enabled, 0=disabled
writeWord_MD(0x380000, 1); // Enable BRAM Writes
for (unsigned long currByte = 0; currByte < bramSize; currByte += 512) {
myFile.read(sdBuffer, 512);
for (int i = 0; i < 512; i++) {
writeWord_MD(0x300000 + currByte + i, sdBuffer[i]);
}
}
writeWord_MD(0x380000, 0); // Disable BRAM Writes
// Close the file:
myFile.close();
println_Msg(F(""));
display_Clear();
println_Msg(F("Done"));
display_Update();
}
else {
print_Error(F("SD Error"), true);
}
dataIn_MD();
}
//******************************************
// Realtec Mapper Functions
//******************************************
void writeRealtec(unsigned long address, byte value) { // Realtec 0x404000 (UPPER)/0x400000 (LOWER)
dataOut_MD();
PORTF = address & 0xFF; // 0x00 ADDR A0-A7
PORTK = (address >> 8) & 0xFF; // ADDR A8-A15
PORTL = (address >> 16) & 0xFF; //0x20 ADDR A16-A23
PORTA = 0x00; // DATA D8-D15
PORTH |= (1 << 0); // /RES HIGH
PORTH |= (1 << 3); // CE HIGH
PORTC = value;
PORTH &= ~(1 << 4) & ~(1 << 5); // /UDSW + /LDSW LOW
PORTH |= (1 << 4) | (1 << 5); // /UDSW + /LDSW HIGH
dataIn_MD();
}
void readRealtec_MD() {
// Set control
dataIn_MD();
// Get name, add extension and convert to char array for sd lib
strcpy(fileName, romName);
strcat(fileName, ".MD");
// create a new folder
EEPROM_readAnything(10, foldern);
sprintf(folder, "MD/ROM/%s/%d", romName, foldern);
sd.mkdir(folder, true);
sd.chdir(folder);
display_Clear();
print_Msg(F("Saving to "));
print_Msg(folder);
println_Msg(F("/..."));
display_Update();
// write new folder number back to eeprom
foldern = foldern + 1;
EEPROM_writeAnything(10, foldern);
// Open file on sd card
if (!myFile.open(fileName, O_RDWR | O_CREAT)) {
print_Error(F("SD Error"), true);
}
// Realtec Registers
writeWord_MD(0x201000, 4); // Number of 128K Blocks 0x402000 (0x201000)
writeRealtec(0x200000, 1); // ROM Lower Address 0x400000 (0x200000)
writeRealtec(0x202000, 0); // ROM Upper Address 0x404000 (0x202000)
word d = 0;
for (unsigned long currBuffer = 0; currBuffer < cartSize / 2; currBuffer += 256) {
// Blink led
if (currBuffer % 16384 == 0)
PORTB ^= (1 << 4);
for (int currWord = 0; currWord < 256; currWord++) {
word myWord = readWord_MD(currBuffer + currWord);
// Split word into two bytes
// Left
sdBuffer[d] = (( myWord >> 8 ) & 0xFF);
// Right
sdBuffer[d + 1] = (myWord & 0xFF);
d += 2;
}
myFile.write(sdBuffer, 512);
d = 0;
}
// Close the file:
myFile.close();
}
2018-10-14 10:09:25 +02:00
//******************************************
// End of File
//******************************************