2019-01-27 12:38:47 +01:00
# Combined STL file with all parts (print out of ABS/PLA in any color you like)
2018-05-05 20:19:12 +02:00
![image ](https://dl.dropboxusercontent.com/s/4remnau0kni660i/combined_no_tabs.png?dl=1 )
# Separate STL files for each part
2018-04-13 16:55:09 +02:00
#### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
2018-04-13 16:54:08 +02:00
![image ](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1 )
2018-11-19 14:26:04 +01:00
#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough (print with one perimeter for the vertical shell and enable thin wall detection in the slicer)
2018-04-13 16:54:08 +02:00
![image ](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1 )
#### backplate_tabs.stl is the backplate that holds the Arduino
![image ](https://dl.dropboxusercontent.com/s/01v4d28lzbp1ue4/backplate16.png?dl=1 )
2019-01-27 12:33:55 +01:00
#### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb (print with clear PLA/ABS)
2018-04-13 16:54:08 +02:00
2019-01-27 12:36:52 +01:00
![image ](https://dl.dropboxusercontent.com/s/2nujdtcrzvrh7hg/sd_spacer.png?dl=1 )
2018-04-13 16:54:08 +02:00
2018-05-05 20:19:12 +02:00
#### sidewall_tabs.stl secures the Arduino Mega to the backplate with five M2x8 screws
2018-04-13 16:54:08 +02:00
![image ](https://dl.dropboxusercontent.com/s/p7v2l37f1c130b4/sidewall.png?dl=1 )