Create README.md

This commit is contained in:
sanni 2018-04-13 16:54:08 +02:00 committed by GitHub
parent dcfb6fcf4c
commit 36502008cf
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23

19
extras/3dprint/README.md Normal file
View File

@ -0,0 +1,19 @@
### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
![image](https://dl.dropboxusercontent.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1)
#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough
![image](https://dl.dropboxusercontent.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1)
#### backplate_tabs.stl is the backplate that holds the Arduino
![image](https://dl.dropboxusercontent.com/s/01v4d28lzbp1ue4/backplate16.png?dl=1)
#### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb
![image](https://dl.dropboxusercontent.com/s/fn6g1pm88puq8h6/sd_spacer.png?dl=1)
#### sidewall_tabs.stl secures the Arduino Mega to the backplate with three M2x10 screws
![image](https://dl.dropboxusercontent.com/s/p7v2l37f1c130b4/sidewall.png?dl=1)