Mirrors/cartreader
2
0
Fork 0
mirror of https://github.com/sanni/cartreader.git synced 2024-11-28 07:24:15 +01:00
Code Issues Projects Releases Wiki Activity
358 Commits 1 Branch 17 Tags 146 MiB
aec88ed69b
Commit Graph

118 Commits

Author SHA1 Message Date
sanni
ce4f7aeeee V2.2: Add Satellaview support 
Supported carts so far:
-BS-X Sorewa Namaewo Nusumareta Machino Monogatari
 2018-10-22 20:29:49 +02:00
sanni
7356a93710 V2.1: Slow down reading of N64 eeprom 2018-10-20 17:38:24 +02:00
sanni
7e0e7bd08c
V2.0: Increment version number after merge 2018-10-14 10:41:16 +02:00
sanni
4f6f79b3b1
Merge branch 'master' into patch-1 2018-10-14 10:16:07 +02:00
sanni
4631475619
Add files via upload 2018-10-14 10:09:25 +02:00
vogelfreiheit
10c55a9059
Add support to N64.ino for some cartridges with alternative FlashRAM ICs 
Some cartridges might have differing versions depending on the region they were released to.  In most cases, the IC identifies as something else not presently covered by the current code, but they are ABI compatible with the existent FlashRAM supported types.

This will add support for 29L1100KC-15B0 compatible ICs like the MX29L1101.
 2018-10-14 05:30:51 +02:00
sanni
ee6d1b8f81
V1.9: Fix bug with Arduino IDE 1.8.7 2018-10-05 18:33:09 +02:00
sanni
478f9c6a27
V1.8: Disable SRAM when flashing LoROM repro 
[Imgur](https://i.imgur.com/YSI1xRq.jpg)
 2018-09-20 02:30:23 +02:00
sanni
b7c96ef0ed
V1.7: Add repro entries to SNES menu 
These two new entries just forward the user to the flashrom functions inside of flash.ino.     
I have only tested custom-made 29F033 repros using original SHVC-1J3M-20 and SHVC-1A3M-30 PCBs as shown here: https://github.com/sanni/cartreader/wiki/Reflashing-SNES-Repros
 2018-09-12 20:59:48 +02:00
sanni
b816918e70
V1.6: Add support for S29GL032M flashrom (byte mode) 2018-08-29 14:10:28 +02:00
sanni
540e698e7f
V1.5: Enable 27C322 burning code again 
Needs a special eprom adapter that provides 6V VCC and 12V VPP while programming. This can be achieved with two step-ups and a transistor.
 2018-08-24 16:48:35 +02:00
sanni
38aa8aad39
V1.4: Add support for MX29LV320 T/B TSOP48 2018-08-16 19:00:53 +02:00
sanni
3015b1037c
V1.3: Set byte pin to low in 8bit mode 2018-07-29 11:19:25 +02:00
sanni
32734db2cb
Add files via upload 2018-06-21 12:25:44 +02:00
sanni
904e23cecd
V1.2: CX4 support by skaman 
Thanks alot :)
 2018-06-21 11:38:42 +02:00
sanni
f7bd4878eb
V1.1: Add support for Intel 512M29EW (64MB) N64 repro 
Haven't tested it myself but should work thx to BASSIX
 2018-06-11 09:42:35 +02:00
sanni
40d2361855
V1.0: Change versioning to the more common #.# format 2018-05-05 20:58:49 +02:00
sanni
bec6426901
Update README.md 2018-05-05 20:56:33 +02:00
sanni
f8f78cc5a1
V33C: Fixed writing first 20 bytes of 27C322 eprom 
Apparently the step-up converter needs a little delay before it can provide the 12V VPP.
The verify function still does not work though, I have no clue why.
 2018-04-21 19:39:56 +02:00
sanni
f9c89d4666
V33B: Updated 27C322 timings 
The first 10 words still do not get written though, not sure if I need something like a setup delay or if my eprom is broken.   
Too enable the eprom menu for testing 27C322 flashing change the following lines in Flash.ino:     
  // create menu with title and 3 options to choose from     
  unsigned char flashSlot;      
  // Copy menuOptions out of progmem      
  convertPgm(menuOptionsFlash, 3);      
  flashSlot = question_box("Select flashrom slot", menuOptions, 3, 0);
 2018-04-21 17:14:11 +02:00
sanni
72a1a6d7c8
V33A: Accidentally left 27C322 eprom menu enabled 
Eprom programming is still highly experimental and does not work 100% yet.
 2018-04-21 14:23:13 +02:00
sanni
b77519d104 V33: Add PCE support by tamanegi_taro 
Many thanks to tamanegi_taro, great work.
 2018-04-18 16:58:02 +02:00
sanni
09d122369f
V32A: Add verifying ST M27C322 Eproms (beta) 2018-04-05 16:47:19 +02:00
sanni
45f67ed300
V32: Add writing ST M27C322 Eproms (beta) 
Needs custom flash adapter with 12V step-up converter modul for VPP.   
5V VCC seems to work even though datasheet specifies 6.25V VCC while programming.
 2018-04-04 22:20:53 +02:00
sanni
8f4e33e20b
V31A: Fix writing Game Boy custom MBC3 Flashcart with MX29F016 flashrom 
These: https://www.jrodrigo.net/wiki/how-to-diy-a-gameboy-flash-cartridge-with-a-rom-adapter-board/
 2018-04-03 16:45:45 +02:00
sanni
b37d95b3b5
V31: Add flashing in 16bit mode for 29LV160/320/640 flashroms 2018-04-02 20:23:31 +02:00
sanni
11a12f5926
Fix Copy&Paste error 2018-03-19 12:30:17 +01:00
sanni
2c2eb0e8bd
V30K: Add Momotaro Dentetsu Happy detection 
and also the updated checksum calculation out of skaman's enhanced snes sketch
 2018-03-19 12:24:13 +01:00
sanni
742e96151a
V30J: Fix SA1 sram write 
Mayne thanks to Oatburner and skaman.
 2018-03-12 13:58:03 +01:00
sanni
b369318a32
V30I: Add option to enable/disable N64 CRC32 checking 
In Cart_Reader.ino line 71 change "boolean n64crc = 1" to "boolean n64crc = 0" to disable the CRC32 check when dumping roms. This is useful if you rather calculate the checksums on your much faster computer. Calculating the CRC32 is enabled by default now and can take quite some time.
 2018-02-02 10:52:05 +01:00
sanni
0ba4923699
V30H: Fix MX29L3211 flashing as 16bit in 8bit mode 2018-01-09 23:36:09 +01:00
sanni
6bcc79fd88
V30G: Add N64 manual rom size and force save type menus and Spansion S29GL128N flashrom detection 2017-12-20 10:33:02 +01:00
sanni
8c6d0960fb
V30F: Fix writing MX29LV160 
Reset pin needs to be connected to Reset of SNES slot.
 2017-11-24 21:36:33 +01:00
sanni
76ae5c5408
V30E: Moved disabling interrupts out of the loop when reading/writing N64 eeproms 
Hopefully this was the reason it sometimes froze at that point.
 2017-11-22 12:44:18 +01:00
sanni
fa63471333
Add files via upload 2017-11-21 12:29:09 +01:00
sanni
21585eeb87
Update Cart_Reader.ino 2017-11-21 12:26:39 +01:00
sanni
8613f79382
V30D: Fixed dumping error with all japanese rom names and no game code either 
Example cartridge: Super Family Tennis
 2017-11-21 12:25:55 +01:00
sanni
13657e3a13
V30C: Removed Nintendo Power Menu entry 
Nintendo Power SF Memory is now found under the SNES and Nintendo Power GB Memory under the Game Boy submenu.
 2017-11-19 21:03:37 +01:00
sanni
0ab9f7f120
V30B: Add option to always start in a submenu 
For example you can change "#define startMenu mainMenu" to "#define startMenu n64Menu" if you only need the N64 stuff.
 2017-11-17 20:53:00 +01:00
Scott Smith
dc6ed42f14 Fix for games larger than 96 banks (Nintendo Power Fire Emblem 5 Thracia 776) 2017-10-28 19:27:25 -04:00
sanni
27b63819e5 V30: Add support for Fujitsu MSP55LV100S N64 repros and fix bug in Serial Monitor filebrowser 
- The Fujitsu MSP55LV100S consists out of two Fujitsu MSP55LV512 which themselves are just Spansion S29GL256N flashroms. One flashrom is used for the high byte the other for the low byte.   
- You can now browse pages with the Serial Monitor's file browser just like you can with the OLED.
 2017-10-22 13:32:14 +02:00
sanni
c119555ce7 V29D: Write mapping data of Nintendo Power GB Memory cartridges (DMG-MMSA-JPN) 2017-10-13 19:00:49 +02:00
sanni
2213f8483f V29C: Fixed writing Nintendo Power GB Memory cartridges (DMG-MMSA-JPN) 2017-10-12 23:51:47 +02:00
sanni
43ec1a423b V29B: Added warning when dumping GB Memory flash 
Still have the bank switching error when writing, problem is located at line 2159. I can't switch the bank any time before since I need an uneven bank for the 0x5555 command and I can't switch afterwards or it will be too late and everything will be written to bank 1...
 2017-10-11 23:42:07 +02:00
sanni
79346e3a51 V29A: Write first 0x7FFF bytes of GB Memory cart 
Don't understand how to switch banks right now or more precise when to switch banks without killing off the buffered write sequence.
 2017-10-11 20:57:34 +02:00
sanni
4bb76e01e2 V28I: Added an alternative ID for the Fujitsu MSP GBA Repros 
Fujitsu MSP55LV128 and Fujitsu MSP55LV128N are the same flashrom but they have different ID's ...
 2017-10-07 12:19:34 +02:00
sanni
e2b10ca316 V28H: Support for Fujitsu MSP55LV512 (64MB) and Intel 4400L0ZDQ0 (where the CPLD limits it to 32MB) N64 repros 2017-10-01 19:55:23 +02:00
sanni
8e8ff3262e V28G: Check N64 repro sector protection 
Still trying to get the MSP flashrom repros working, hopefully mine will arrive soon so I can actually test revisions quicker
 2017-09-21 12:57:09 +02:00
sanni
bda2f84553 V28F: Update version number after merge 2017-09-19 17:34:41 +02:00
sanni
f2e2196ab9 Merge branch 'master' into master 2017-09-19 17:21:14 +02:00