mirror of https://github.com/sanni/cartreader.git
282 lines
6.9 KiB
C++
282 lines
6.9 KiB
C++
//******************************************
|
|
// POKEMON MINI MODULE
|
|
//******************************************
|
|
#ifdef ENABLE_POKE
|
|
// Pokemon Mini
|
|
// Cartridge Pinout
|
|
// 32P 0.5mm pitch
|
|
// NOTE: Console SMD connector - 33P 1.0mm pitch
|
|
//
|
|
// TOP ROW BOTTOM ROW
|
|
// +----------+
|
|
// VCC (3.3V) -| B1 |
|
|
// | A1 |- VCC (3.3V)
|
|
// A20 -| B2 |
|
|
// | A2 |- A9/A19
|
|
// A8/A18 -| B3 |
|
|
// | A3 |- A7/A17
|
|
// A6/A16 -| B4 |
|
|
// | A4 |- A5/A15
|
|
// A4/A14 -| B5 |
|
|
// | A5 |- A3/A13
|
|
// A2/A12 -| B6 |
|
|
// | A6 |- A1/A11
|
|
// A0/A10 -| B7 |
|
|
// | A7 |- VCC (3.3V)
|
|
// HALE -| B8 |
|
|
// | -- |
|
|
// LALE -| B9 |
|
|
// | A8 |- GND
|
|
// D0 -| B10 |
|
|
// | A9 |- D1
|
|
// D2 -| B11 |
|
|
// | A10 |- D3
|
|
// D4 -| B12 |
|
|
// | A11 |- D5
|
|
// D6 -| B13 |
|
|
// | A12 |- D7
|
|
// OE -| B14 |
|
|
// | A13 |- IRQ
|
|
// WE -| B15 |
|
|
// | A14 |- CS
|
|
// CARD_N -| B16 |
|
|
// | A15 |- GND
|
|
// GND -| B17 |
|
|
// +----------+
|
|
//
|
|
// TOP
|
|
// +----------------------------------------------------------------------------+
|
|
// | B17 B16 B15 B14 B13 B12 B11 B10 B9 B8 B7 B6 B5 B4 B3 B2 B1 |
|
|
// LEFT | | RIGHT
|
|
// | A15 A14 A13 A12 A11 A10 A9 A8 --- A7 A6 A5 A4 A3 A2 A1 |
|
|
// +----------------------------------------------------------------------------+
|
|
// BOTTOM
|
|
|
|
// CONTROL PINS:
|
|
// HALE(PH0) - SNES RESET
|
|
// CS(PH3) - SNES /CS
|
|
// LALE(PH4) - SNES /IRQ
|
|
// WE(PH5) - SNES /WR
|
|
// OE(PH6) - SNES /RD
|
|
|
|
// NOTE: SET VOLTAGE TO 3.3V
|
|
|
|
//******************************************
|
|
// Defines
|
|
//******************************************
|
|
#define HALE_ENABLE PORTH |= (1 << 0) // LATCH HIGH ADDRESS
|
|
#define HALE_DISABLE PORTH &= ~(1 << 0)
|
|
#define LALE_ENABLE PORTH |= (1 << 4) // LATCH LOW ADDRESS
|
|
#define LALE_DISABLE PORTH &= ~(1 << 4)
|
|
#define CS_ENABLE PORTH |= (1 << 3) // CHIP SELECT
|
|
#define CS_DISABLE PORTH &= ~(1 << 3)
|
|
#define WE_ENABLE PORTH |= (1 << 5) // WRITE ENABLE
|
|
#define WE_DISABLE PORTH &= ~(1 << 5)
|
|
#define OE_ENABLE PORTH |= (1 << 6) // OUTPUT ENABLE
|
|
#define OE_DISABLE PORTH &= ~(1 << 6)
|
|
|
|
//******************************************
|
|
// Menu
|
|
//******************************************
|
|
// Base Menu
|
|
static const char* const menuOptionsPOKE[] PROGMEM = { FSTRING_READ_ROM, FSTRING_RESET };
|
|
|
|
void pokeMenu() {
|
|
convertPgm(menuOptionsPOKE, 2);
|
|
uint8_t mainMenu = question_box(F("POKEMON MINI MENU"), menuOptions, 2, 0);
|
|
|
|
switch (mainMenu) {
|
|
case 0:
|
|
// Read ROM
|
|
sd.chdir("/");
|
|
readROM_POKE();
|
|
sd.chdir("/");
|
|
break;
|
|
|
|
case 1:
|
|
// reset
|
|
resetArduino();
|
|
break;
|
|
}
|
|
}
|
|
|
|
//******************************************
|
|
// SETUP
|
|
//******************************************
|
|
void setup_POKE() {
|
|
// Request 3.3V
|
|
setVoltage(VOLTS_SET_3V3);
|
|
|
|
// Set Address Pins to Output
|
|
// Pokemon Mini uses A0-A9 (DUAL A10-A19) + A20 (CONNECT TO SNES A10) [A11-A23 UNUSED]
|
|
//A0-A7
|
|
DDRF = 0xFF;
|
|
//A8-A15
|
|
DDRK = 0xFF;
|
|
//A16-A23
|
|
DDRL = 0xFF;
|
|
|
|
// Set Control Pins to Output
|
|
// LALE(PH0) ---(PH1) CS(PH3) HALE(PH4) WE(PH5) OE(PH6)
|
|
DDRH |= (1 << 0) | (1 << 1) | (1 << 3) | (1 << 4) | (1 << 5) | (1 << 6);
|
|
|
|
// Set TIME(PJ0) to Output (UNUSED)
|
|
DDRJ |= (1 << 0);
|
|
|
|
// Set Pins (D0-D7) to Input
|
|
DDRC = 0x00;
|
|
|
|
// Setting Control Pins to LOW (DISABLE)
|
|
// LALE(PH0) CS(PH3) HALE(PH4) WE(PH5) OE(PH6)
|
|
PORTH &= ~(1 << 0) & ~(1 << 3) & ~(1 << 4) & ~(1 << 5) & ~(1 << 6);
|
|
|
|
// SET CS HIGH
|
|
PORTH |= (1 << 3); // CS HIGH (ENABLE)
|
|
|
|
// Set Unused Data Pins (PA0-PA7) to Output
|
|
DDRA = 0xFF;
|
|
|
|
// Set Unused Pins HIGH
|
|
PORTA = 0xFF;
|
|
PORTH |= (1 << 1); // CPUCLK(PH1)
|
|
PORTL = 0xFF; // A16-A23
|
|
PORTJ |= (1 << 0); // TIME(PJ0)
|
|
|
|
strcpy(romName, "POKEMINI");
|
|
|
|
mode = CORE_POKE;
|
|
}
|
|
|
|
//******************************************
|
|
// READ DATA
|
|
//******************************************
|
|
uint8_t readData_POKE(uint32_t addr) {
|
|
// Address Lines A0-A20 = 1MB (ALL ROMS ARE 512K)
|
|
// 100000 = 1 0000 0000 0000 0000 0000 = 100 0000 0000|00 0000 0000
|
|
|
|
// High Address A10-A20
|
|
PORTF = (addr >> 10) & 0xFF; // A10-A17
|
|
PORTK = (addr >> 18) & 0x07; // A18-A20
|
|
HALE_ENABLE; // LATCH HIGH ADDRESS
|
|
NOP;
|
|
NOP;
|
|
HALE_DISABLE;
|
|
|
|
// Low Address A0-A9
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0x03; // A8-A9
|
|
LALE_ENABLE; // LATCH LOW ADDRESS
|
|
NOP;
|
|
NOP;
|
|
|
|
// Read Enable
|
|
OE_ENABLE; // OE HIGH
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
// Data
|
|
uint8_t ret = PINC;
|
|
|
|
// Read Disable
|
|
OE_DISABLE; // OE LOW
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
LALE_DISABLE;
|
|
|
|
return ret;
|
|
}
|
|
|
|
//******************************************
|
|
// WRITE DATA
|
|
//******************************************
|
|
void writeData_POKE(uint32_t addr, uint8_t data) {
|
|
// High Address A10-A20
|
|
PORTF = (addr >> 10) & 0xFF; // A10-A17
|
|
PORTK = (addr >> 18) & 0x07; // A18-A20
|
|
HALE_ENABLE; // LATCH HIGH ADDRESS
|
|
NOP;
|
|
NOP;
|
|
HALE_DISABLE;
|
|
|
|
// Low Address A0-A9
|
|
PORTF = addr & 0xFF; // A0-A7
|
|
PORTK = (addr >> 8) & 0x03; // A8-A9
|
|
LALE_ENABLE; // LATCH LOW ADDRESS
|
|
|
|
// Set Data to Output
|
|
DDRC = 0xFF;
|
|
PORTC = data;
|
|
|
|
// Write Enable
|
|
WE_ENABLE; // WE HIGH
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
// Write Disable
|
|
WE_DISABLE; // OE LOW
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
NOP;
|
|
|
|
LALE_DISABLE;
|
|
|
|
// Reset Data to Input
|
|
DDRC = 0x00;
|
|
}
|
|
|
|
//******************************************
|
|
// READ ROM
|
|
//******************************************
|
|
|
|
void readROM_POKE() {
|
|
createFolder("POKE", "ROM", romName, "min");
|
|
|
|
display_Clear();
|
|
print_STR(saving_to_STR, 0);
|
|
print_Msg(folder);
|
|
println_Msg(F("/..."));
|
|
display_Update();
|
|
|
|
// open file on sdcard
|
|
if (!myFile.open(fileName, O_RDWR | O_CREAT))
|
|
print_FatalError(sd_error_STR);
|
|
|
|
// write new folder number back to EEPROM
|
|
foldern++;
|
|
EEPROM_writeAnything(0, foldern);
|
|
|
|
// read rom
|
|
uint32_t progress = 0;
|
|
draw_progressbar(0, 0x80000);
|
|
for (uint32_t addr = 0; addr < 0x80000; addr += 512) { // 512K
|
|
for (int w = 0; w < 512; w++) {
|
|
uint8_t temp = readData_POKE(addr + w);
|
|
sdBuffer[w] = temp;
|
|
}
|
|
myFile.write(sdBuffer, 512);
|
|
progress += 512;
|
|
draw_progressbar(progress, 0x80000);
|
|
}
|
|
myFile.close();
|
|
|
|
// compare dump CRC with db values
|
|
compareCRC("pkmn.txt", 0, 1, 0);
|
|
println_Msg(FS(FSTRING_EMPTY));
|
|
|
|
// Prints string out of the common strings array either with or without newline
|
|
print_STR(press_button_STR, 1);
|
|
display_Update();
|
|
wait();
|
|
}
|
|
#endif
|