cartreader/pcb/README.md

Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader

cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm

gbaadapter.zip is an adapter for Game Boy and Game Boy Advance cartridges, PCB thickness is 1.2mm

flash_adapter.zip is an adapter for 8bit and 16bit(in 8bit mode) flashroms like the 29F032, 29L3211 or 29LV160, PCB thickness is 1.2mm

md_adapter.zip is an adapter for SEGA Mega Drive/Genesis carts, PCB thickness is 1.2mm

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

gbaadapter.stl is a 3d printed case for the Game Boy (Advance) adapter pcb

backplate.stl is the backplate that holds the Arduino

sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb

sidewall.stl secures the Arduino Mega to the backplate with three M2x10 screws

TSOP40_to_DIP36.zip is an adapter pcb for making homebrew SNES games with the 29F032 family of flashroms

For the needed parts list see here: https://github.com/sanni/cartreader/wiki/Needed-Parts

How to order a PCB: https://github.com/sanni/cartreader/wiki/How-to-order-printed-circuit-boards