cartreader/pcb/README.md

### Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader   

#### cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm  

![image](https://www.dropbox.com/s/yze20m39gjvii3q/cartreader.png?dl=1)    

#### adapter.zip are various adapter PCBs, PCB thickness is 1.2mm and size is 10x10cm    

![image](https://www.dropbox.com/s/d9c75c3h116rxms/adapter.png?dl=1)    

Contains:   
- Game Boy (Color)/ Game Boy Advance cartridge adapter   
- small pcb for soldering a 29F032 flashrom into a Mission Impossible Game Boy Color cartridge   
- flash adapter for flashing 29F016, 29F032, 29F033, 29F1610 and 29L3211 flashroms   
- adapter for soldering a 29F032 into a SNES cartridge   

#### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot   

![image](https://www.dropbox.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1)   

#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough     

![image](https://www.dropbox.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1)   

#### gbslot.stl is a 3d printed case for the Game Boy (Advance) adapter pcb      

![image](https://www.dropbox.com/s/se2qe9zbw0dbvrb/gbslot.png?dl=1)   

#### backplate_3dprint.stl is the backplate where the Arduino is screwed to    

![image](https://www.dropbox.com/s/sbsd41tyqyjonqf/backplate_3dprint.png?dl=1)    

#### For the needed parts list see here: https://github.com/sanni/cartreader/wiki/PCB-Needed-Parts   
#### How to order a PCB: https://github.com/sanni/cartreader/wiki/PCB-How-to-order-printed-circuit-boards