2.3 KiB
###Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader
####cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm
####adapter.zip are various adapter PCBs, PCB thickness is 1.2mm and size is 10x10cm
Contains:
- Game Boy (Color)/ Game Boy Advance cartridge adapter
- small pcb for soldering a 29F032 flashrom into a Mission Impossible Game Boy Color cartridge
- flash adapter for flashing 29F016, 29F032, 29F033, 29F1610 and 29L3211 flashroms
- adapter for soldering a 29F032 into a SNES cartridge
####backplate.dxf are the acrylic pieces for laser cutting, the thickness is 4mm and size is 10x10cm, you need to tell the manufacturer that you need all the cut-outs too
Contains:
- backplate
- 2x SD card spacer
- display protector
####snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
####n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough
####gbslot.stl is a 3d printed case for the Game Boy (Advance) adapter pcb
####backplate_3dprint.stl is an alternative backplate for 3d printing
####For the needed parts list see here: https://github.com/sanni/cartreader/wiki/PCB-Needed-Parts
####How to order a PCB: https://github.com/sanni/cartreader/wiki/PCB-How-to-order-printed-circuit-boards
###Attention: While I have tested all the parts I can not guarantee flawless operation, so use at own risk and always check the boards for short circuits