cartreader/pcb/README.md

Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader

cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm

adapter.zip are various adapter PCBs, PCB thickness is 1.2mm and size is 10x10cm

Contains:

• Game Boy (Color)/ Game Boy Advance cartridge adapter
• small pcb for soldering a 29F032 flashrom into a Mission Impossible Game Boy Color cartridge
• flash adapter for flashing 29F016, 29F032, 29F033, 29F1610 and 29L3211 flashroms
• adapter for soldering a 29F032 into a SNES cartridge

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

gbslot.stl is a 3d printed case for the Game Boy (Advance) adapter pcb

backplate.stl is the backplate that holds the Arduino

sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb

For the needed parts list see here: https://github.com/sanni/cartreader/wiki/Needed-Parts

How to order a PCB: https://github.com/sanni/cartreader/wiki/How-to-order-printed-circuit-boards