cartreader/pcb/README.md
2017-03-16 11:00:59 +01:00

2.1 KiB

Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader

cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm

image

adapter.zip are various adapter PCBs, PCB thickness is 1.2mm and size is 10x10cm

image

Contains:

  • Game Boy (Color)/ Game Boy Advance cartridge adapter
  • small pcb for soldering a 29F032 flashrom into a Mission Impossible Game Boy Color cartridge
  • flash adapter for flashing 29F016, 29F032, 29F033, 29F1610 and 29L3211 flashroms
  • adapter for soldering a 29F032 into a SNES cartridge

backplate.dxf are the acrylic pieces for laser cutting, the thickness is 4mm and size is 10x10cm, you need to tell the manufacturer that you need all the cut-outs too

image

Contains:

  • backplate
  • 2x SD card spacer
  • display protector

snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot

image

n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough

image

gbslot.stl is a 3d printed case for the Game Boy (Advance) adapter pcb

image

backplate_3dprint.stl is an alternative backplate for 3d printing

image

For the needed parts list see here: https://github.com/sanni/cartreader/wiki/PCB-Needed-Parts

How to order a PCB: https://github.com/sanni/cartreader/wiki/PCB-How-to-order-printed-circuit-boards

Attention: While I have tested all the parts I can not guarantee flawless operation, so use at own risk and always check the boards for short circuits