mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-27 21:41:52 +01:00
31 lines
3.2 KiB
Markdown
31 lines
3.2 KiB
Markdown
#### nes_adapter.zip is an add-on for reading NES carts, [PCB thickness needs to be changed to 1.2mm](https://dl.dropboxusercontent.com/s/va1c72073cqfy90/pcb12.jpg?dl=1), this is very important or else it won't fit into the SNES slot. You can order a 2.5mm 72pin NES slot [here](https://www.aliexpress.com/item/32827561164.html).
|
|
|
|
|
|
|
|
#### famicom_adapter.zip is an add-on for reading Famicom carts, [PCB thickness needs to be changed to 1.2mm](https://dl.dropboxusercontent.com/s/va1c72073cqfy90/pcb12.jpg?dl=1), this is very important or else it won't fit into the SNES slot. You can order a 2.54mm 60pin Famicom slot [here](https://www.aliexpress.com/item/32827561249.html).
|
|
|
|
|
|
|
|
#### sms_adapter.zip is an add-on for reading Sega Master System carts. You can order a 2.54mm 50pin SMS slot [here](https://www.aliexpress.com/item/32818469880.html). The adapter is based on the [design by Raphnet](https://www.raphnet.net/electronique/sms_to_smd/index_en.php). For use with the Cart Reader ignore the SMD footprints on the PCB, the adapter does not need any components. I only bridged R5 to connect the reset line, although I'm not sure if this is even needed. Unlike the other adapters this one plugs into the MD slot.
|
|
|
|
|
|
|
|
#### wonderswan_adapter.zip is an add-on for reading WonderSwan carts. [PCB thickness needs to be changed to 1.2mm](https://dl.dropboxusercontent.com/s/755249v8smcuoft/wonderswan_adapter.png?dl=1), this is very important or else it won't fit into the SNES slot. (Optional) Install C1 and C2 with 10uF/16v 1210 package tantalum capacitor.
|
|
|
|
|
|
|
|
#### flash_adapter.zip is an add-on for writing flashroms like the 29F032, 29L3211, 29LV160, [PCB thickness needs to be changed to 1.2mm](https://dl.dropboxusercontent.com/s/va1c72073cqfy90/pcb12.jpg?dl=1), this is very important or else it won't fit into the SNES slot.
|
|
|
|
|
|
|
|
#### eprom_adapter.zip is an add-on for writing an 27C322 eprom, [PCB thickness needs to be changed to 1.2mm](https://www.dropbox.com/s/va1c72073cqfy90/pcb12.jpg?dl=0), this is very important or else it won't fit into the SNES slot.
|
|
|
|
|
|
|
|
#### With the sd_adapter PCB you can transform the microSD module from the parts list into a full size SD module by desoldering all the components and soldering them to this PCB. This is optional since you can also just mount the microSD module as is.
|
|
|
|
|
|
|
|
|
|
For [Oshpark](https://oshpark.com/) you need to [rename filename.GML to filename.GKO](https://www.dropbox.com/s/0rcvhalgeu11sf8/rename.jpg?dl=0) or it won't find the board outline. Oshpark is great for ordering the smaller PCBs but very expensive for larger boards.
|