mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-25 12:31:54 +01:00
93 lines
3.5 KiB
Markdown
93 lines
3.5 KiB
Markdown
## This Arduino sketch is licensed under the GNU GENERAL PUBLIC LICENSE Version 3 (GPL v3)
|
|
|
|
### This means that you are free to:
|
|
- use, modify and distribute this software, even commercially
|
|
|
|
### Under the following terms:
|
|
- state changes
|
|
- disclose source
|
|
- same license
|
|
|
|
### Limitations:
|
|
- Liability
|
|
- Warranty
|
|
|
|
More details: https://www.gnu.org/licenses/gpl-3.0.en.html
|
|
|
|
##
|
|
|
|
Every submodule has it's own setup_XX() function that configures the needed pins and a submenu that lets you choose what you want to do.
|
|
The code directly addresses the pins via the DDR, PIN and PORT registers.
|
|
Please also refer to the [pinout Open Office sheet](https://github.com/sanni/cartreader/blob/master/pinout.ods).
|
|
```
|
|
void setup_N64_Controller() {
|
|
// Output a low signal
|
|
PORTH &= ~(1 << 4);
|
|
// Set Controller Data Pin(PH4) to Input
|
|
DDRH &= ~(1 << 4);
|
|
}
|
|
```
|
|
|
|
Would be the same as this in a more traditional Arduino sketch:
|
|
```
|
|
int dataPin = 7;
|
|
|
|
void setup(){
|
|
// Output a low signal
|
|
digitalWrite(dataPin, LOW);
|
|
// Set controller data pin to input
|
|
pinMode(dataPin, INPUT);
|
|
}
|
|
```
|
|
To preserve memory every string is saved into the flash of the Arduino, also called progmem. This is done by using the F() macro.
|
|
```
|
|
println_Msg(F("Press Button."));
|
|
```
|
|
Also all the menus are stored in progmem and are only recalled to sram when needed.
|
|
```
|
|
// N64 controller menu items
|
|
const char N64ContMenuItem1[] PROGMEM = "Test Controller";
|
|
const char N64ContMenuItem2[] PROGMEM = "Read ControllerPak";
|
|
const char N64ContMenuItem3[] PROGMEM = "Write ControllerPak";
|
|
const char N64ContMenuItem4[] PROGMEM = "Reset";
|
|
const char* const menuOptionsN64Controller[] PROGMEM = {N64ContMenuItem1, N64ContMenuItem2, N64ContMenuItem3, N64ContMenuItem4};
|
|
```
|
|
In an effort to keep the codebase as portable as possible instead of using the functions supplied by the OLED library directly to print out text, auxiliary functions like `println_Msg` are being used. So if you want to change to another display library you don't need to change all the code but only the helper functions.
|
|
```
|
|
void print_Msg(long unsigned int message) {
|
|
if (enable_OLED)
|
|
display.print(message);
|
|
if (enable_Serial)
|
|
Serial.print(message);
|
|
}
|
|
```
|
|
|
|
Before uploading the code to your Arduino you need to select your hardware version in options.h
|
|
```
|
|
//******************************************
|
|
// CHOOSE HARDWARE VERSION
|
|
//******************************************
|
|
#define HW4
|
|
//#define HW3
|
|
//#define HW2
|
|
//#define HW1
|
|
//#define SERIAL_MONITOR
|
|
|
|
```
|
|
|
|
For more info please have a look at [this wiki article](https://github.com/sanni/cartreader/wiki/How-to-flash-the-Arduino).
|
|
|
|
Needed libraries(already included in the portable Arduino IDE under Releases)
|
|
|
|
SD lib: https://github.com/greiman/SdFat
|
|
OLED lib: https://github.com/adafruit/Adafruit_SSD1306
|
|
GFX Lib: https://github.com/adafruit/Adafruit-GFX-Library
|
|
BusIO: https://github.com/adafruit/Adafruit_BusIO
|
|
LCD lib: https://github.com/olikraus/U8g2_Arduino
|
|
RGB Tools lib: https://github.com/joushx/Arduino-RGB-Tools (you need to move the files from the src subdir to the root dir of the library)
|
|
Neopixel lib: https://github.com/adafruit/Adafruit_NeoPixel
|
|
Rotary Enc lib: https://github.com/mathertel/RotaryEncoder
|
|
SI5351 lib: https://github.com/etherkit/Si5351Arduino
|
|
RTC lib: https://github.com/adafruit/RTClib
|
|
Frequency Counter lib: https://github.com/PaulStoffregen/FreqCount
|