mirror of
https://github.com/sanni/cartreader.git
synced 2024-12-18 00:51:49 +01:00
56 lines
3.9 KiB
Markdown
56 lines
3.9 KiB
Markdown
![image](https://dl.dropboxusercontent.com/s/ioc5oewzcuvs8nz/logos.png?dl=1)
|
|
|
|
# Open Source Cartridge Reader
|
|
This project represents a community-driven effort to provide an easy to build and easy to modify cartridge dumper.
|
|
Happy making. 🔧🔨😊
|
|
|
|
For any questions you can use the [Discussions](https://github.com/sanni/cartreader/discussions) and/or [Issues](https://github.com/sanni/cartreader/issues) section here on Github or visit the accompanying thread in the [Arduino Forum](http://forum.arduino.cc/index.php?topic=158974.9001).
|
|
And be sure to check the guides in the [Wiki](https://github.com/sanni/cartreader/wiki) too.
|
|
|
|
![image](https://dl.dropboxusercontent.com/s/70zaxs9lyyuxvqe/IMG_0799.jpg?dl=1)
|
|
|
|
#### Features:
|
|
- Completely stand-alone, does not need a PC to operate (unless for updating firmware)
|
|
- Easy to modify open-source code, write your own extensions and share them with others
|
|
- Portable thanks to a battery
|
|
- Modular design using mostly off-the-shelf components
|
|
|
|
![image](https://dl.dropboxusercontent.com/s/mhlx620tmbnglx1/hw5wframe.jpg?dl=1)
|
|
|
|
#### Supported Systems:
|
|
- Reads NES, Famicom and Family Basic cartridges including save
|
|
- Supports Mapper 30/NESmaker and flashes INL NM30 boards
|
|
- Reads SNES roms and reads/writes save games from and to the SNES cartridge
|
|
Supported cartridge types so far: LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator)
|
|
- Reads and writes SNES Satellaview 8M Memory packs (BS-X cartridge and Adafruit Clock Generator needed)
|
|
- Reads and writes Nintendo Power Super Famicom Memory Flash Cartridges (needs Adafruit Clock Generator for best result)
|
|
- Reflashes some Chinese or custom-made SNES repros with AM29F032, MBM29F033, MX29LV320 or MX29LV640 flashroms
|
|
- Reads N64 roms and reads/writes save games(4K/16K Eeprom + Sram + all 3 types of Flashram), Eeprom needs Adafruit Clockgen by default, Proto carts are not supported yet
|
|
- Reads and writes N64 controller paks and also can test a N64 controller's buttons and thumbstick
|
|
- Reflashes some Chinese N64 repros with S29GL type flashroms
|
|
- Reflashes N64 Gamesharks with SST 29LE010(and similar) eeproms
|
|
- Reads Game Boy (Color) roms and reads/writes save games
|
|
- Reads and writes Nintendo Power Game Boy Memory Flash Cartridges
|
|
- Programs custom-made Game Boy (Color) flashcarts with AM29F016, AM29F032, MBM29F033 flashrom
|
|
- Programs EMS GB Smart 32M flash carts
|
|
- Programs Gameboy Camera Flashcart
|
|
- Reads Game Boy Advance roms and reads/writes most of the save games(4K Eeprom, 64K Eeprom, Sram/Fram, SST39VF512 512K flash + MX29L010 1M flash)
|
|
- Reflashes some Chinese GBA repros with i4000L0YBQ0, i4400L0ZDQ0, MX29GL128E, MSP55LV128, PC28F256M29 or M29W128GH flashroms
|
|
- Reads Sega Mega Drive roms and reads/writes save games(Sram/Fram, Eeprom)
|
|
- Reads Sega Master System roms and saves
|
|
- Reads Sega Game Gear roms and saves (using Retrode adapter)
|
|
- Reads some Sega Mark III cartridges (using Raphnet adapter)
|
|
- Reads some Sega SG-1000 cartridges (using Raphnet adapter)
|
|
- Reads some Sega Cards (using Card Catcher and Raphnet Mark III Adapter)
|
|
- Reads PC engine/TG16 cartridges (using Retrode or custom adapter)
|
|
- Reads WonderSwan cartridges (using custom adapter)
|
|
- Reads NeoGeo Pocket cartridges (using custom adapter)
|
|
- Programs flashrom chips like AM29F016B/D, AM29F032B, MBM29F033C, MX29F1601, MX29F1610, MX29L3211, MX29LV160, MX29LV320, S29GL032M, MX26L6420, MBM29F800BA, AM29F800BB, LH28F016SUT, AM29F400AB, E28FXXXJ3A and AM29LV033C (using custom adapter)
|
|
- Programs M27C322 eproms (using custom adapter)
|
|
|
|
![image](https://dl.dropboxusercontent.com/s/l6eujajz60x3ho9/IMG_079999.jpg?dl=1)
|
|
|
|
#### Open Source Licenses:
|
|
- Software(everything in Cart_Reader folder) = GPL v3
|
|
- Hardware(everything in hardware folder) = CC-BY-4.0
|