cartreader/pcb/README.md
2017-05-20 21:13:37 +02:00

33 lines
1.5 KiB
Markdown

### Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader
#### cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm
![image](https://www.dropbox.com/s/yze20m39gjvii3q/cartreader.png?dl=1)
#### gbaadapter.zip is an adapter for Game Boy and Game Boy Advance cartridges, PCB thickness is 1.2mm
![image](https://www.dropbox.com/s/rnnnstkn3ynv10g/gbaadapter_pcb.png?dl=1)
#### snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
![image](https://www.dropbox.com/s/07slhy8pi9ujiri/snes_spacer.png?dl=1)
#### n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough
![image](https://www.dropbox.com/s/s6jxobazww3sm81/n64sleeve.png?dl=1)
#### gbaadapter.stl is a 3d printed case for the Game Boy (Advance) adapter pcb
![image](https://www.dropbox.com/s/ainwnoclzzq24ez/gbaadapter.png?dl=1)
#### backplate.stl is the backplate that holds the Arduino
![image](https://www.dropbox.com/s/0qixf0n33emi1ed/backplate.png?dl=1)
#### sd_spacer.stl holds the RGB led and fits between the SD card and the Cart Reader pcb
![image](https://www.dropbox.com/s/fn6g1pm88puq8h6/sd_spacer.png?dl=1)
#### For the needed parts list see here: https://github.com/sanni/cartreader/wiki/Needed-Parts
#### How to order a PCB: https://github.com/sanni/cartreader/wiki/How-to-order-printed-circuit-boards