mirror of
https://github.com/sanni/cartreader.git
synced 2024-11-14 17:05:08 +01:00
46 lines
2.3 KiB
Markdown
46 lines
2.3 KiB
Markdown
###Here you will find all the printed circuit boards needed to build the Arduino Cartridge Reader
|
|
|
|
####cartreader.zip is the main PCB, PCB thickness is 1.6mm and size is 10x10cm
|
|
|
|
|
|
|
|
####adapter.zip are various adapter PCBs, PCB thickness is 1.2mm and size is 10x10cm
|
|
|
|
|
|
|
|
Contains:
|
|
- Game Boy (Color)/ Game Boy Advance cartridge adapter
|
|
- small pcb for soldering a 29F032 flashrom into a Mission Impossible Game Boy Color cartridge
|
|
- flash adapter for flashing 29F016, 29F032, 29F033, 29F1610 and 29L3211 flashroms
|
|
- adapter for soldering a 29F032 into a SNES cartridge
|
|
|
|
####backplate.dxf are the acrylic pieces for laser cutting, the thickness is 4mm and size is 10x10cm, you need to tell the manufacturer that you need all the cut-outs too
|
|
|
|
|
|
|
|
Contains:
|
|
- backplate
|
|
- 2x SD card spacer
|
|
- display protector
|
|
|
|
####snes_spacer.stl is a small 3d printed spacer to relieve pressure from the pins of SNES clone console slot
|
|
|
|
|
|
|
|
####n64sleeve.stl helps with aligning N64 cartridges if the clone slot is not long/wide enough
|
|
|
|
|
|
|
|
####gbslot.stl is a 3d printed case for the Game Boy (Advance) adapter pcb
|
|
|
|
|
|
|
|
####backplate_3dprint.stl is an alternative backplate for 3d printing
|
|
|
|
|
|
|
|
####For the needed parts list see here: https://github.com/sanni/cartreader/wiki/PCB-Needed-Parts
|
|
####How to order a PCB: https://github.com/sanni/cartreader/wiki/PCB-How-to-order-printed-circuit-boards
|
|
|
|
###Attention: While I have tested all the parts I can not guarantee flawless operation, so use at own risk and always check the boards for short circuits
|