[Core/VDP] improved accuracy of DMA Copy/Fill & added support for CRAM/VSRAM Fill (verified on real hardware)

This commit is contained in:
EkeEke 2013-10-20 23:58:15 +02:00
parent 8a813b0ecb
commit e14330e01c

View File

@ -133,8 +133,8 @@ static uint16 addr_latch; /* Latched A15, A14 of address */
static uint16 sat_base_mask; /* Base bits of SAT */
static uint16 sat_addr_mask; /* Index bits of SAT */
static uint16 dma_src; /* DMA source address */
static uint16 dmafill; /* DMA Fill setup */
static uint32 dma_endCycles; /* 68k cycles to DMA end */
static int dmafill; /* DMA Fill pending flag */
static int cached_write; /* 2nd part of 32-bit CTRL port write (Genesis mode) or LSB of CRAM data (Game Gear mode) */
static uint16 fifo[4]; /* FIFO ring-buffer */
static int fifo_idx; /* FIFO write index */
@ -649,7 +649,7 @@ void vdp_dma_update(unsigned int cycles)
/* Check if DMA is finished */
if (!dma_length)
{
/* DMA source address registers are incremented during DMA */
/* DMA source address registers are incremented during DMA (even DMA Fill) */
uint16 end = reg[21] + (reg[22] << 8) + reg[19] + (reg[20] << 8);
reg[21] = end & 0xff;
reg[22] = end >> 8;
@ -730,17 +730,29 @@ void vdp_68k_ctrl_w(unsigned int data)
{
case 2:
{
/* DMA Fill will be triggered by next DATA port write */
dmafill = 0x100;
/* DMA Fill */
dma_type = 2;
/* DMA is pending until next DATA port write */
dmafill = 1;
/* Set DMA Busy flag */
status |= 0x02;
/* DMA end cycle is not initialized yet (this prevents DMA Busy flag from being cleared on VDP status read) */
dma_endCycles = 0xffffffff;
break;
}
case 3:
{
/* DMA Copy */
dma_type = 3;
/* DMA length */
dma_length = (reg[20] << 8) | reg[19];
/* Zero DMA length */
/* Zero DMA length (pre-decrementing counter) */
if (!dma_length)
{
dma_length = 0x10000;
@ -749,18 +761,20 @@ void vdp_68k_ctrl_w(unsigned int data)
/* DMA source address */
dma_src = (reg[22] << 8) | reg[21];
/* trigger DMA copy */
dma_type = 3;
/* Trigger DMA */
vdp_dma_update(m68k.cycles);
break;
}
default:
{
/* DMA from 68k bus */
dma_type = (code & 0x06) ? 0 : 1;
/* DMA length */
dma_length = (reg[20] << 8) | reg[19];
/* Zero DMA length */
/* Zero DMA length (pre-decrementing counter) */
if (!dma_length)
{
dma_length = 0x10000;
@ -779,8 +793,7 @@ void vdp_68k_ctrl_w(unsigned int data)
dma_length--;
}
/* trigger DMA from 68k bus */
dma_type = (code & 0x06) ? 0 : 1;
/* Trigger DMA */
vdp_dma_update(m68k.cycles);
break;
}
@ -876,16 +889,25 @@ void vdp_z80_ctrl_w(unsigned int data)
case 2:
{
/* DMA Fill will be triggered by next write to DATA port */
dmafill = 0x100;
dmafill = 1;
/* Set DMA Busy flag */
status |= 0x02;
/* DMA end cycle is not initialized yet (this prevents DMA Busy flag from being cleared on VDP status read) */
dma_endCycles = 0xffffffff;
break;
}
case 3:
{
/* DMA copy */
dma_type = 3;
/* DMA length */
dma_length = (reg[20] << 8) | reg[19];
/* Zero DMA length */
/* Zero DMA length (pre-decrementing counter) */
if (!dma_length)
{
dma_length = 0x10000;
@ -894,8 +916,7 @@ void vdp_z80_ctrl_w(unsigned int data)
/* DMA source address */
dma_src = (reg[22] << 8) | reg[21];
/* trigger DMA copy */
dma_type = 3;
/* Trigger DMA */
vdp_dma_update(Z80.cycles);
break;
}
@ -1242,10 +1263,15 @@ unsigned int vdp_68k_ctrl_r(unsigned int cycles)
vdp_fifo_update(cycles);
}
/* Update DMA Busy flag */
if ((status & 2) && !dma_length && (cycles >= dma_endCycles))
/* Check if DMA Busy flag is set */
if (status & 2)
{
status &= 0xFFFD;
/* Check if DMA is finished */
if (!dma_length && (cycles >= dma_endCycles))
{
/* Clear DMA Busy flag */
status &= 0xFFFD;
}
}
/* Return VDP status */
@ -1283,10 +1309,15 @@ unsigned int vdp_z80_ctrl_r(unsigned int cycles)
/* Cycle-accurate SOVR & VINT flags */
int line = (lines_per_frame + (cycles / MCYCLES_PER_LINE) - 1) % lines_per_frame;
/* Update DMA Busy flag (Mega Drive VDP specific) */
if ((system_hw & SYSTEM_MD) && (status & 2) && !dma_length && (cycles >= dma_endCycles))
/* Check if DMA busy flag is set (Mega Drive VDP specific) */
if (status & 2)
{
status &= 0xFD;
/* Check if DMA is finished */
if (!dma_length && (cycles >= dma_endCycles))
{
/* Clear DMA Busy flag */
status &= 0xFD;
}
}
/* Check if we are already on next line */
@ -1300,7 +1331,7 @@ unsigned int vdp_z80_ctrl_r(unsigned int cycles)
}
else if ((line >= 0) && (line < bitmap.viewport.h) && !(work_ram[0x1ffb] & cart.special))
{
/* Check sprites overflow & collision */
/* render next line to check sprites overflow & collision */
render_line(line);
}
}
@ -2417,23 +2448,22 @@ static void vdp_68k_data_w_m5(unsigned int data)
/* Write data */
vdp_bus_w(data);
/* DMA Fill */
if (dmafill & 0x100)
/* Check if DMA Fill is pending */
if (dmafill)
{
/* Fill data = MSB (DMA fill flag is cleared) */
dmafill = data >> 8;
/* Clear DMA Fill pending flag */
dmafill = 0;
/* DMA length */
dma_length = (reg[20] << 8) | reg[19];
/* Zero DMA length */
/* Zero DMA length (pre-decrementing counter) */
if (!dma_length)
{
dma_length = 0x10000;
}
/* Process DMA Fill*/
dma_type = 2;
/* Trigger DMA */
vdp_dma_update(m68k.cycles);
}
}
@ -2694,23 +2724,22 @@ static void vdp_z80_data_w_m5(unsigned int data)
/* Increment address register */
addr += reg[15];
/* DMA Fill */
if (dmafill & 0x100)
/* Check if DMA Fill is pending */
if (dmafill)
{
/* Fill data (DMA fill flag is cleared) */
dmafill = data;
/* Clear DMA Fill pending flag */
dmafill = 0;
/* DMA length */
dma_length = (reg[20] << 8) | reg[19];
/* Zero DMA length */
/* Zero DMA length (pre-decrementing counter) */
if (!dma_length)
{
dma_length = 0x10000;
}
/* Process DMA Fill */
dma_type = 2;
/* Trigger DMA */
vdp_dma_update(Z80.cycles);
}
}
@ -3074,11 +3103,11 @@ static void vdp_dma_68k_io(unsigned int length)
dma_src = (source >> 1) & 0xffff;
}
/* VRAM Copy (TODO: check if CRAM or VSRAM copy is possible) */
/* VRAM Copy */
static void vdp_dma_copy(unsigned int length)
{
/* VRAM read/write operation only */
if ((code & 0x1E) == 0x10)
/* CD4 should be set (CD0-CD3 ignored) otherwise VDP locks (hard reset needed) */
if (code & 0x10)
{
int name;
uint8 data;
@ -3088,52 +3117,9 @@ static void vdp_dma_copy(unsigned int length)
do
{
/* Read byte from source address */
data = READ_BYTE(vram, source);
/* Read byte from adjacent VRAM source address */
data = READ_BYTE(vram, source ^ 1);
/* Intercept writes to Sprite Attribute Table */
if ((addr & sat_base_mask) == satb)
{
/* Update internal SAT */
WRITE_BYTE(sat, addr & sat_addr_mask, data);
}
/* Write byte to VRAM address */
WRITE_BYTE(vram, addr, data);
/* Update pattern cache */
MARK_BG_DIRTY(addr);
/* Increment source address */
source++;
/* Increment VRAM address */
addr += reg[15];
}
while (--length);
/* Update DMA source address */
dma_src = source;
}
else
{
/* DMA source & VRAM addresses are still incremented */
addr += reg[15] * length;
dma_src += length;
}
}
/* VRAM Fill (TODO: check if CRAM or VSRAM fill is possible) */
static void vdp_dma_fill(unsigned int length)
{
/* VRAM write operation only (Williams Greatest Hits after soft reset) */
if ((code & 0x1F) == 0x01)
{
int name;
uint8 data = dmafill;
do
{
/* Intercept writes to Sprite Attribute Table */
if ((addr & sat_base_mask) == satb)
{
@ -3141,20 +3127,126 @@ static void vdp_dma_fill(unsigned int length)
WRITE_BYTE(sat, (addr & sat_addr_mask) ^ 1, data);
}
/* Write byte to adjacent VRAM address */
/* Write byte to adjacent VRAM destination address */
WRITE_BYTE(vram, addr ^ 1, data);
/* Update pattern cache */
MARK_BG_DIRTY (addr);
MARK_BG_DIRTY(addr);
/* Increment VRAM address */
/* Increment VRAM source address */
source++;
/* Increment VRAM destination address */
addr += reg[15];
}
while (--length);
}
else
{
/* VRAM address is still incremented */
addr += reg[15] * length;
/* Update DMA source address */
dma_src = source;
}
}
/* DMA Fill */
static void vdp_dma_fill(unsigned int length)
{
/* Check destination code (CD0-CD3) */
switch (code & 0x0F)
{
case 0x01: /* VRAM */
{
int name;
/* Get source data from last written FIFO entry */
uint8 data = fifo[(fifo_idx+3)&3] >> 8;
do
{
/* Intercept writes to Sprite Attribute Table */
if ((addr & sat_base_mask) == satb)
{
/* Update internal SAT */
WRITE_BYTE(sat, (addr & sat_addr_mask) ^ 1, data);
}
/* Write byte to adjacent VRAM address */
WRITE_BYTE(vram, addr ^ 1, data);
/* Update pattern cache */
MARK_BG_DIRTY (addr);
/* Increment VRAM address */
addr += reg[15];
}
while (--length);
break;
}
case 0x03: /* CRAM */
{
/* Get source data from next available FIFO entry */
uint16 data = fifo[fifo_idx];
/* Pack 16-bit bus data (BBB0GGG0RRR0) to 9-bit CRAM data (BBBGGGRRR) */
data = ((data & 0xE00) >> 3) | ((data & 0x0E0) >> 2) | ((data & 0x00E) >> 1);
do
{
/* Pointer to CRAM 9-bit word */
uint16 *p = (uint16 *)&cram[addr & 0x7E];
/* Check if CRAM data is being modified */
if (data != *p)
{
/* CRAM index (64 words) */
int index = (addr >> 1) & 0x3F;
/* Write CRAM data */
*p = data;
/* Color entry 0 of each palette is never displayed (transparent pixel) */
if (index & 0x0F)
{
/* Update color palette */
color_update_m5(index, data);
}
/* Update backdrop color */
if (index == border)
{
color_update_m5(0x00, data);
}
}
/* Increment CRAM address */
addr += reg[15];
}
while (--length);
break;
}
case 0x05: /* VSRAM */
{
/* Get source data from next available FIFO entry */
uint16 data = fifo[fifo_idx];
do
{
/* Write VSRAM data */
*(uint16 *)&vsram[addr & 0x7E] = data;
/* Increment VSRAM address */
addr += reg[15];
}
while (--length);
break;
}
default:
{
/* invalid destination does nothing (Williams Greatest Hits after soft reset) */
/* address is still incremented */
addr += reg[15] * length;
}
}
}