mirror of
https://github.com/ekeeke/Genesis-Plus-GX.git
synced 2024-12-28 04:01:48 +01:00
755 lines
17 KiB
C
755 lines
17 KiB
C
/***************************************************************************************
|
|
* Genesis Plus
|
|
* Z80 bus handlers (Genesis & Master System modes)
|
|
*
|
|
* Support for SG-1000, Mark-III, Master System, Game Gear & Mega Drive ports access
|
|
*
|
|
* Copyright (C) 1998-2003 Charles Mac Donald (original code)
|
|
* Copyright (C) 2007-2016 Eke-Eke (Genesis Plus GX)
|
|
*
|
|
* Redistribution and use of this code or any derivative works are permitted
|
|
* provided that the following conditions are met:
|
|
*
|
|
* - Redistributions may not be sold, nor may they be used in a commercial
|
|
* product or activity.
|
|
*
|
|
* - Redistributions that are modified from the original source must include the
|
|
* complete source code, including the source code for all components used by a
|
|
* binary built from the modified sources. However, as a special exception, the
|
|
* source code distributed need not include anything that is normally distributed
|
|
* (in either source or binary form) with the major components (compiler, kernel,
|
|
* and so on) of the operating system on which the executable runs, unless that
|
|
* component itself accompanies the executable.
|
|
*
|
|
* - Redistributions must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
****************************************************************************************/
|
|
|
|
#include "shared.h"
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Handlers for access to unused addresses and those which make the */
|
|
/* machine lock up. */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
INLINE void z80_unused_w(unsigned int address, unsigned char data)
|
|
{
|
|
#ifdef LOGERROR
|
|
error("Z80 unused write %04X = %02X (%x)\n", address, data, Z80.pc.w.l);
|
|
#endif
|
|
}
|
|
|
|
INLINE unsigned char z80_unused_r(unsigned int address)
|
|
{
|
|
#ifdef LOGERROR
|
|
error("Z80 unused read %04X (%x)\n", address, Z80.pc.w.l);
|
|
#endif
|
|
return 0xFF;
|
|
}
|
|
|
|
INLINE void z80_lockup_w(unsigned int address, unsigned char data)
|
|
{
|
|
#ifdef LOGERROR
|
|
error("Z80 lockup write %04X = %02X (%x)\n", address, data, Z80.pc.w.l);
|
|
#endif
|
|
if (!config.force_dtack)
|
|
{
|
|
Z80.cycles = 0xFFFFFFFF;
|
|
zstate = 0;
|
|
}
|
|
}
|
|
|
|
INLINE unsigned char z80_lockup_r(unsigned int address)
|
|
{
|
|
#ifdef LOGERROR
|
|
error("Z80 lockup read %04X (%x)\n", address, Z80.pc.w.l);
|
|
#endif
|
|
if (!config.force_dtack)
|
|
{
|
|
Z80.cycles = 0xFFFFFFFF;
|
|
zstate = 0;
|
|
}
|
|
return 0xFF;
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Z80 Memory handlers (Genesis mode) */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
unsigned char z80_memory_r(unsigned int address)
|
|
{
|
|
switch((address >> 13) & 7)
|
|
{
|
|
case 0: /* $0000-$3FFF: Z80 RAM (8K mirrored) */
|
|
case 1:
|
|
{
|
|
return zram[address & 0x1FFF];
|
|
}
|
|
|
|
case 2: /* $4000-$5FFF: YM2612 */
|
|
{
|
|
return fm_read(Z80.cycles, address & 3);
|
|
}
|
|
|
|
case 3: /* $7F00-$7FFF: VDP */
|
|
{
|
|
if ((address >> 8) == 0x7F)
|
|
{
|
|
return (*zbank_memory_map[0xc0].read)(address);
|
|
}
|
|
return z80_unused_r(address);
|
|
}
|
|
|
|
default: /* $8000-$FFFF: 68k bank (32K) */
|
|
{
|
|
address = zbank | (address & 0x7FFF);
|
|
if (zbank_memory_map[address >> 16].read)
|
|
{
|
|
return (*zbank_memory_map[address >> 16].read)(address);
|
|
}
|
|
return READ_BYTE(m68k.memory_map[address >> 16].base, address & 0xFFFF);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void z80_memory_w(unsigned int address, unsigned char data)
|
|
{
|
|
switch((address >> 13) & 7)
|
|
{
|
|
case 0: /* $0000-$3FFF: Z80 RAM (8K mirrored) */
|
|
case 1:
|
|
{
|
|
zram[address & 0x1FFF] = data;
|
|
return;
|
|
}
|
|
|
|
case 2: /* $4000-$5FFF: YM2612 */
|
|
{
|
|
fm_write(Z80.cycles, address & 3, data);
|
|
return;
|
|
}
|
|
|
|
case 3: /* Bank register and VDP */
|
|
{
|
|
switch(address >> 8)
|
|
{
|
|
case 0x60: /* $6000-$60FF: Bank register */
|
|
{
|
|
gen_zbank_w(data & 1);
|
|
return;
|
|
}
|
|
|
|
case 0x7F: /* $7F00-$7FFF: VDP */
|
|
{
|
|
(*zbank_memory_map[0xc0].write)(address, data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
z80_unused_w(address, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
default: /* $8000-$FFFF: 68k bank (32K) */
|
|
{
|
|
address = zbank | (address & 0x7FFF);
|
|
if (zbank_memory_map[address >> 16].write)
|
|
{
|
|
(*zbank_memory_map[address >> 16].write)(address, data);
|
|
return;
|
|
}
|
|
WRITE_BYTE(m68k.memory_map[address >> 16].base, address & 0xFFFF, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Unused Port handlers */
|
|
/* */
|
|
/* Ports are unused when not in Mark III compatibility mode. */
|
|
/* */
|
|
/* Genesis games that access ports anyway: */
|
|
/* Thunder Force IV reads port $BF in it's interrupt handler. */
|
|
/* */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
unsigned char z80_unused_port_r(unsigned int port)
|
|
{
|
|
#if LOGERROR
|
|
error("Z80 unused read from port %04X (%x)\n", port, Z80.pc.w.l);
|
|
#endif
|
|
if (system_hw == SYSTEM_SMS)
|
|
{
|
|
unsigned int address = (Z80.pc.w.l - 1) & 0xFFFF;
|
|
return z80_readmap[address >> 10][address & 0x3FF];
|
|
}
|
|
return 0xFF;
|
|
}
|
|
|
|
void z80_unused_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
#if LOGERROR
|
|
error("Z80 unused write to port %04X = %02X (%x)\n", port, data, Z80.pc.w.l);
|
|
#endif
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* MegaDrive / Genesis port handlers (Master System compatibility mode) */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
void z80_md_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x01:
|
|
{
|
|
io_z80_write(1, data, Z80.cycles + PBC_CYCLE_OFFSET);
|
|
return;
|
|
}
|
|
|
|
case 0x40:
|
|
case 0x41:
|
|
{
|
|
SN76489_Write(Z80.cycles, data);
|
|
return;
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
vdp_z80_data_w(data);
|
|
return;
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
vdp_z80_ctrl_w(data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
port &= 0xFF;
|
|
|
|
/* write FM chip if enabled */
|
|
if ((port >= 0xF0) && (config.ym2413 & 1))
|
|
{
|
|
fm_write(Z80.cycles, port, data);
|
|
return;
|
|
}
|
|
|
|
z80_unused_port_w(port, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned char z80_md_port_r(unsigned int port)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x40:
|
|
{
|
|
return ((vdp_hvc_r(Z80.cycles - 15) >> 8) & 0xFF);
|
|
}
|
|
|
|
case 0x41:
|
|
{
|
|
return (vdp_hvc_r(Z80.cycles - 15) & 0xFF);
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
return vdp_z80_data_r();
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
return vdp_z80_ctrl_r(Z80.cycles);
|
|
}
|
|
|
|
default:
|
|
{
|
|
port &= 0xFF;
|
|
|
|
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
|
|
{
|
|
return io_z80_read(port & 1);
|
|
}
|
|
|
|
/* read FM chip if enabled */
|
|
if ((port >= 0xF0) && (config.ym2413 & 1))
|
|
{
|
|
return YM2413Read();
|
|
}
|
|
|
|
return z80_unused_port_r(port);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Game Gear port handlers */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
void z80_gg_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
switch(port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
port &= 0xFF;
|
|
|
|
if (port < 0x07)
|
|
{
|
|
if (system_hw == SYSTEM_GG)
|
|
{
|
|
io_gg_write(port, data);
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* full address range is decoded by Game Gear I/O chip (fixes G-LOC Air Battle) */
|
|
else if ((port == 0x3E) || (port == 0x3F))
|
|
{
|
|
io_z80_write(port & 1, data, Z80.cycles + SMS_CYCLE_OFFSET);
|
|
return;
|
|
}
|
|
|
|
z80_unused_port_w(port, data);
|
|
return;
|
|
}
|
|
|
|
case 0x40:
|
|
case 0x41:
|
|
{
|
|
SN76489_Write(Z80.cycles, data);
|
|
return;
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
vdp_z80_data_w(data);
|
|
return;
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
vdp_sms_ctrl_w(data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned char z80_gg_port_r(unsigned int port)
|
|
{
|
|
switch(port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
port &= 0xFF;
|
|
|
|
if (port < 0x07)
|
|
{
|
|
if (system_hw == SYSTEM_GG)
|
|
{
|
|
return io_gg_read(port);
|
|
}
|
|
}
|
|
|
|
return z80_unused_port_r(port);
|
|
}
|
|
|
|
case 0x40:
|
|
{
|
|
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
|
|
}
|
|
|
|
case 0x41:
|
|
{
|
|
return (vdp_hvc_r(Z80.cycles) & 0xFF);
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
return vdp_z80_data_r();
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
return vdp_z80_ctrl_r(Z80.cycles);
|
|
}
|
|
|
|
default:
|
|
{
|
|
port &= 0xFF;
|
|
|
|
/* full address range is decoded by Game Gear I/O chip */
|
|
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
|
|
{
|
|
return io_z80_read(port & 1);
|
|
}
|
|
|
|
return z80_unused_port_r(port);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Master System port handlers */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
void z80_ms_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
/* full address range is decoded by 315-5297 I/O chip (fixes Super Tetris / Power Boggle Boggle) */
|
|
if ((region_code != REGION_JAPAN_NTSC) || ((port & 0xFE) == 0x3E))
|
|
{
|
|
io_z80_write(port & 1, data, Z80.cycles + SMS_CYCLE_OFFSET);
|
|
return;
|
|
}
|
|
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
|
|
case 0x40:
|
|
case 0x41:
|
|
{
|
|
SN76489_Write(Z80.cycles, data);
|
|
return;
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
vdp_z80_data_w(data);
|
|
return;
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
vdp_sms_ctrl_w(data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
/* check if YM2413 chip is enabled */
|
|
if (config.ym2413 & 1)
|
|
{
|
|
if (region_code == REGION_JAPAN_NTSC)
|
|
{
|
|
/* 315-5297 I/O chip decodes full address range */
|
|
port &= 0xFF;
|
|
|
|
/* internal YM2413 chip */
|
|
if ((port == 0xF0) || (port == 0xF1))
|
|
{
|
|
fm_write(Z80.cycles, port, data);
|
|
return;
|
|
}
|
|
|
|
/* Audio control register (315-5297 I/O chip specific) */
|
|
if (port == 0xF2)
|
|
{
|
|
/* D1 D0
|
|
-----
|
|
0 0 : enable only PSG output (power-on default)
|
|
0 1 : enable only FM output
|
|
1 0 : disable both PSG & FM output
|
|
1 1 : enable both PSG and FM output
|
|
*/
|
|
SN76489_Config(Z80.cycles, config.psg_preamp, config.psgBoostNoise, ((data + 1) & 0x02) ? 0x00 : 0xFF);
|
|
fm_write(Z80.cycles, 0x02, data);
|
|
io_reg[6] = data;
|
|
return;
|
|
}
|
|
}
|
|
else if (!(port & 4))
|
|
{
|
|
/* external FM board */
|
|
fm_write(Z80.cycles, port, data);
|
|
return;
|
|
}
|
|
}
|
|
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned char z80_ms_port_r(unsigned int port)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
return z80_unused_port_r(port & 0xFF);
|
|
}
|
|
|
|
case 0x40:
|
|
{
|
|
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
|
|
}
|
|
|
|
case 0x41:
|
|
{
|
|
return (vdp_hvc_r(Z80.cycles) & 0xFF);
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
return vdp_z80_data_r();
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
return vdp_z80_ctrl_r(Z80.cycles);
|
|
}
|
|
|
|
default:
|
|
{
|
|
if (region_code == REGION_JAPAN_NTSC)
|
|
{
|
|
/* 315-5297 I/O chip decodes full address range */
|
|
port &= 0xFF;
|
|
|
|
if (port == 0xF2)
|
|
{
|
|
/* D7-D5 : C-SYNC counter (not emulated)
|
|
D4-D2 : Always zero
|
|
D1 : Mute control bit 1
|
|
D0 : Mute control bit 0
|
|
*/
|
|
return io_reg[0x06] & 0x03;
|
|
}
|
|
|
|
if ((port == 0xC0) || (port == 0xC1) || (port == 0xDC) || (port == 0xDD))
|
|
{
|
|
/* read I/O ports if enabled */
|
|
if (!(io_reg[0x0E] & 0x04))
|
|
{
|
|
return io_z80_read(port & 1);
|
|
}
|
|
}
|
|
|
|
return z80_unused_port_r(port);
|
|
}
|
|
else
|
|
{
|
|
uint8 data = 0xFF;
|
|
|
|
/* read FM board if enabled */
|
|
if (!(port & 4) && (config.ym2413 & 1))
|
|
{
|
|
data = YM2413Read();
|
|
}
|
|
|
|
/* read I/O ports if enabled */
|
|
if (!(io_reg[0x0E] & 0x04))
|
|
{
|
|
data &= io_z80_read(port & 1);
|
|
}
|
|
|
|
return data;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* Mark III port handlers */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
void z80_m3_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
|
|
case 0x40:
|
|
case 0x41:
|
|
{
|
|
SN76489_Write(Z80.cycles, data);
|
|
return;
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
vdp_z80_data_w(data);
|
|
return;
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
vdp_sms_ctrl_w(data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
/* write FM chip if enabled */
|
|
if (!(port & 4) && (config.ym2413 & 1))
|
|
{
|
|
fm_write(Z80.cycles, port, data);
|
|
return;
|
|
}
|
|
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned char z80_m3_port_r(unsigned int port)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x00:
|
|
case 0x01:
|
|
{
|
|
return z80_unused_port_r(port & 0xFF);
|
|
}
|
|
|
|
case 0x40:
|
|
{
|
|
return ((vdp_hvc_r(Z80.cycles) >> 8) & 0xFF);
|
|
}
|
|
|
|
case 0x41:
|
|
{
|
|
return (vdp_hvc_r(Z80.cycles) & 0xFF);
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
return vdp_z80_data_r();
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
return vdp_z80_ctrl_r(Z80.cycles);
|
|
}
|
|
|
|
default:
|
|
{
|
|
/* read FM chip if enabled */
|
|
if (!(port & 4) && (config.ym2413 & 1))
|
|
{
|
|
/* I/O ports are automatically disabled by hardware */
|
|
return YM2413Read();
|
|
}
|
|
|
|
/* read I/O ports */
|
|
return io_z80_read(port & 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/*--------------------------------------------------------------------------*/
|
|
/* SG-1000 port handlers */
|
|
/*--------------------------------------------------------------------------*/
|
|
|
|
void z80_sg_port_w(unsigned int port, unsigned char data)
|
|
{
|
|
switch(port & 0xC1)
|
|
{
|
|
case 0x40:
|
|
case 0x41:
|
|
{
|
|
SN76489_Write(Z80.cycles, data);
|
|
|
|
/* Z80 !WAIT input is tied to SN76489AN chip READY pin (held low for 32 clocks after each write access) */
|
|
Z80.cycles += (32 * 15);
|
|
return;
|
|
}
|
|
|
|
case 0x80:
|
|
{
|
|
vdp_z80_data_w(data);
|
|
return;
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
vdp_tms_ctrl_w(data);
|
|
return;
|
|
}
|
|
|
|
default:
|
|
{
|
|
z80_unused_port_w(port & 0xFF, data);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
unsigned char z80_sg_port_r(unsigned int port)
|
|
{
|
|
switch (port & 0xC1)
|
|
{
|
|
case 0x80:
|
|
{
|
|
return vdp_z80_data_r();
|
|
}
|
|
|
|
case 0x81:
|
|
{
|
|
return vdp_z80_ctrl_r(Z80.cycles);
|
|
}
|
|
|
|
case 0xC0:
|
|
case 0xC1:
|
|
{
|
|
return io_z80_read(port & 1);
|
|
}
|
|
|
|
default:
|
|
{
|
|
return z80_unused_port_r(port & 0xFF);
|
|
}
|
|
}
|
|
}
|