Genesis-Plus-GX/source/cart_hw/eeprom_spi.c
EkeEke f2a7b4cb8a [Core/SCD]
---------------
* added support for CUE files
* added CD-DA tracks emulation (needs CUE+BIN or ISO+WAV images)
* added CD fader emulation
* added CDD "Fast FW" & "Fast RW" commands emulation
* improved CDD TOC emulation (random freezes in Sonic CD, Switch/Panic, Final Fight CD and probably many others)
* improved PCM chip synchronization with SUB-CPU (missing speeches in Willy Beamish)
* fixed PCM chip emulation (random hangs in Snatcher, missing sound effects in Switch/Panic, Final Fight CD, Wonderdog...)
* fixed Word-RAM memory mode on soft-reset (missing logo gfx effects)
* fixed SUB-CPU access to unused areas when using PC-relative instructions (Final Fight CD first boss random crash)
* fixed CPU idle loop detection on memory mode register access (Pugsy CD first boss slowdown)
* fixed Mode 1 emulation (cartridge boot mode)

[Core/Sound]
---------------
* replaced FIR resampler by Blip Buffer for FM resampling
* modified SN76489 core for use of Blip Buffer
* improved PSG & FM chips synchronization using Blip Buffer
* added Game Gear PSG stereo support
* fixed SG-1000 specific PSG noise
* fixed YM2612 LFO AM waveform (California Games surfing event)
* fixed YM2612 phase precision
* minor optimizations to YM2612 core

[Core/Game Gear]
---------------
* added support for CJ Elephant Fugitive (recently released by SMS Power)
* added Game Gear extended screen option

[Core/Genesis]
---------------
* added support for a few recently dumped (but unreleased) games

[Core/General]
---------------
* improved ROM & CD image file loading
* various code cleanup

[Gamecube/Wii]
---------------
* added automatic disc swap feature
* removed automatic frameskipping (no use)
* improved general audio/video sync
* various code cleanup & bugfixes
2012-10-13 19:01:31 +02:00

359 lines
11 KiB
C

/****************************************************************************
* Genesis Plus
* SPI Serial EEPROM (25xxx/95xxx) support
*
* Copyright (C) 2012 Eke-Eke (Genesis Plus GX)
*
* Redistribution and use of this code or any derivative works are permitted
* provided that the following conditions are met:
*
* - Redistributions may not be sold, nor may they be used in a commercial
* product or activity.
*
* - Redistributions that are modified from the original source must include the
* complete source code, including the source code for all components used by a
* binary built from the modified sources. However, as a special exception, the
* source code distributed need not include anything that is normally distributed
* (in either source or binary form) with the major components (compiler, kernel,
* and so on) of the operating system on which the executable runs, unless that
* component itself accompanies the executable.
*
* - Redistributions must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************************/
#include "shared.h"
/* max supported size 64KB (25x512/95x512) */
#define SIZE_MASK 0xffff
#define PAGE_MASK 0x7f
/* hard-coded board implementation (!WP pin not used) */
#define BIT_DATA (0)
#define BIT_CLK (1)
#define BIT_HOLD (2)
#define BIT_CS (3)
typedef enum
{
STANDBY,
GET_OPCODE,
GET_ADDRESS,
WRITE_BYTE,
READ_BYTE
} T_STATE_SPI;
typedef struct
{
uint8 cs; /* !CS line state */
uint8 clk; /* SCLK line state */
uint8 out; /* SO line state */
uint8 status; /* status register */
uint8 opcode; /* 8-bit opcode */
uint8 buffer; /* 8-bit data buffer */
uint16 addr; /* 16-bit address */
uint32 cycles; /* current operation cycle */
T_STATE_SPI state; /* current operation state */
} T_EEPROM_SPI;
static T_EEPROM_SPI spi_eeprom;
void eeprom_spi_init()
{
/* reset eeprom state */
memset(&spi_eeprom, 0, sizeof(T_EEPROM_SPI));
spi_eeprom.out = 1;
spi_eeprom.state = GET_OPCODE;
/* enable backup RAM */
sram.custom = 2;
sram.on = 1;
}
void eeprom_spi_write(unsigned char data)
{
/* Make sure !HOLD is high */
if (data & (1 << BIT_HOLD))
{
/* Check !CS state */
if (data & (1 << BIT_CS))
{
/* !CS high -> end of current operation */
spi_eeprom.cycles = 0;
spi_eeprom.out = 1;
spi_eeprom.opcode = 0;
spi_eeprom.state = GET_OPCODE;
}
else
{
/* !CS low -> process current operation */
switch (spi_eeprom.state)
{
case GET_OPCODE:
{
/* latch data on CLK positive edge */
if ((data & (1 << BIT_CLK)) && !spi_eeprom.clk)
{
/* 8-bit opcode buffer */
spi_eeprom.opcode |= ((data >> BIT_DATA) & 1);
spi_eeprom.cycles++;
/* last bit ? */
if (spi_eeprom.cycles == 8)
{
/* reset cycles count */
spi_eeprom.cycles = 0;
/* Decode instruction */
switch (spi_eeprom.opcode)
{
case 0x01:
{
/* WRITE STATUS */
spi_eeprom.buffer = 0;
spi_eeprom.state = WRITE_BYTE;
break;
}
case 0x02:
{
/* WRITE BYTE */
spi_eeprom.addr = 0;
spi_eeprom.state = GET_ADDRESS;
break;
}
case 0x03:
{
/* READ BYTE */
spi_eeprom.addr = 0;
spi_eeprom.state = GET_ADDRESS;
break;
}
case 0x04:
{
/* WRITE DISABLE */
spi_eeprom.status &= ~0x02;
spi_eeprom.state = STANDBY;
break;
}
case 0x05:
{
/* READ STATUS */
spi_eeprom.buffer = spi_eeprom.status;
spi_eeprom.state = READ_BYTE;
break;
}
case 0x06:
{
/* WRITE ENABLE */
spi_eeprom.status |= 0x02;
spi_eeprom.state = STANDBY;
break;
}
default:
{
/* specific instructions (not supported) */
spi_eeprom.state = STANDBY;
break;
}
}
}
else
{
/* shift opcode value */
spi_eeprom.opcode = spi_eeprom.opcode << 1;
}
}
break;
}
case GET_ADDRESS:
{
/* latch data on CLK positive edge */
if ((data & (1 << BIT_CLK)) && !spi_eeprom.clk)
{
/* 16-bit address */
spi_eeprom.addr |= ((data >> BIT_DATA) & 1);
spi_eeprom.cycles++;
/* last bit ? */
if (spi_eeprom.cycles == 16)
{
/* reset cycles count */
spi_eeprom.cycles = 0;
/* mask unused address bits */
spi_eeprom.addr &= SIZE_MASK;
/* operation type */
if (spi_eeprom.opcode & 0x01)
{
/* READ operation */
spi_eeprom.buffer = sram.sram[spi_eeprom.addr];
spi_eeprom.state = READ_BYTE;
}
else
{
/* WRITE operation */
spi_eeprom.buffer = 0;
spi_eeprom.state = WRITE_BYTE;
}
}
else
{
/* shift address value */
spi_eeprom.addr = spi_eeprom.addr << 1;
}
}
break;
}
case WRITE_BYTE:
{
/* latch data on CLK positive edge */
if ((data & (1 << BIT_CLK)) && !spi_eeprom.clk)
{
/* 8-bit data buffer */
spi_eeprom.buffer |= ((data >> BIT_DATA) & 1);
spi_eeprom.cycles++;
/* last bit ? */
if (spi_eeprom.cycles == 8)
{
/* reset cycles count */
spi_eeprom.cycles = 0;
/* write data to destination */
if (spi_eeprom.opcode & 0x01)
{
/* update status register */
spi_eeprom.status = (spi_eeprom.status & 0x02) | (spi_eeprom.buffer & 0x0c);
/* wait for operation end */
spi_eeprom.state = STANDBY;
}
else
{
/* Memory Array (write-protected) */
if (spi_eeprom.status & 2)
{
/* check array protection bits (BP0, BP1) */
switch ((spi_eeprom.status >> 2) & 0x03)
{
case 0x01:
{
/* $C000-$FFFF (sector #3) is protected */
if (spi_eeprom.addr < 0xC000)
{
sram.sram[spi_eeprom.addr] = spi_eeprom.buffer;
}
break;
}
case 0x02:
{
/* $8000-$FFFF (sectors #2 and #3) is protected */
if (spi_eeprom.addr < 0x8000)
{
sram.sram[spi_eeprom.addr] = spi_eeprom.buffer;
}
break;
}
case 0x03:
{
/* $0000-$FFFF (all sectors) is protected */
break;
}
default:
{
/* no sectors protected */
sram.sram[spi_eeprom.addr] = spi_eeprom.buffer;
break;
}
}
}
/* reset data buffer */
spi_eeprom.buffer = 0;
/* increase array address (sequential writes are limited within the same page) */
spi_eeprom.addr = (spi_eeprom.addr & ~PAGE_MASK) | ((spi_eeprom.addr + 1) & PAGE_MASK);
}
}
else
{
/* shift data buffer value */
spi_eeprom.buffer = spi_eeprom.buffer << 1;
}
}
break;
}
case READ_BYTE:
{
/* output data on CLK positive edge */
if ((data & (1 << BIT_CLK)) && !spi_eeprom.clk)
{
/* read out bits */
spi_eeprom.out = (spi_eeprom.buffer >> (7 - spi_eeprom.cycles)) & 1;
spi_eeprom.cycles++;
/* last bit ? */
if (spi_eeprom.cycles == 8)
{
/* reset cycles count */
spi_eeprom.cycles = 0;
/* read from memory array ? */
if (spi_eeprom.opcode == 0x03)
{
/* read next array byte */
spi_eeprom.addr = (spi_eeprom.addr + 1) & SIZE_MASK;
spi_eeprom.buffer = sram.sram[spi_eeprom.addr];
}
}
}
break;
}
default:
{
/* wait for !CS low->high transition */
break;
}
}
}
}
/* update input lines */
spi_eeprom.cs = (data >> BIT_CS) & 1;
spi_eeprom.clk = (data >> BIT_CLK) & 1;
}
unsigned int eeprom_spi_read(unsigned int address)
{
return (spi_eeprom.out << BIT_DATA);
}