multiply gyro values by sensitivity
When the hardware calibration fails, values read from sensors need to be multiplied by default sensitivity (16 for gyro, 1 for accelerometer).
Simon McVittie
When watching for hotplug events we can poll the inotify fd, but we
still need to scan /dev/input once per process, otherwise we'll fail
to detect devices that were already connected.
Flatpak[1] and pressure-vessel[2] are known to use user namespaces,
therefore udev event notification via netlink won't work reliably.
Both frameworks provide a filesystem API that libraries can use to
detect them. Do that, and automatically fall back from udev-based
device discovery to the inotify-based fallback introduced in Bug #5337.
[1] <https://flatpak.org/>
[2] <https://gitlab.steamos.cloud/steamrt/steam-runtime-tools/-/tree/master/pressure-vessel>
Signed-off-by: Simon McVittie <smcv@collabora.com>
Alex S
Evdev headers aren't actually included in the base system (well, it has a private copy), they are available through the devel/evdev-proto port instead. We also have devel/libinotify and devel/libudev-devd shims, I didn't verify whether they work with SDL.
This fixes bad report parsing for various newer Xbox controllers, and this driver is now preferred over XInput, since it handles more than 4 controllers.
C.W. Betts
This patch adds support to the GameController framework on macOS Big Sur and later, adding support for MFi controllers as well as rumble support for PS4 and Xbox One. There is some code to make sure that the IOKit joystick handler doesn't include two controllers at once.
While the GameController framework is present in earlier versions of macOS, there was no public, approved way of checking if a specific IOHIDDevice is a controller that GameController could handle. This was changed in Big Sur.
Added support for the PS4 controller gyro and accelerometer on iOS and HIDAPI drivers
Also fixed an issue with the accelerometer on iOS having inverted axes
Spooky
For some reason the Logitech Extreme 3D joystick was added to SDL_gamecontrollerdb.h in the linux section only.
This breaks the joystick in linux as it is not a gamepad. I am unable to correctly use or map the Logitech Exteme 3D joystick in games that use SDL2 in linux.
Please remove Logitech Extreme 3D from SDL_gamecontrollerdb.h Linux section. It is a joystick not a gamepad.
Bart van der Werf
When directinput fails to load, but a controlller is plugged in, an access violation happens.
This is due to IEventHandler_CRawGameControllerVtbl_InvokeAdded calling SDL_DINPUT_JoystickPresent which does not check if dinput is assigned signalling initialization of directinput.
Joel Linn
This fixes two types of MSVC compiler warnings.
- One parameter in the function signatures of two WGI event handlers had one level of indirection too much (and did not match Windows SDK headers). The indirection was cast away so it still worked.
- size_t was implicitly cast to UINT32 for a number of (constant) string lengths.
This improves SDL's ability to detect joystick hotplug in a container
environment.
We cannot reliably receive events from udev in a container, because they
are delivered as netlink events, which are authenticated by their uid
being 0. However, in a user namespace created by an unprivileged user
(for example bubblewrap, as used by Flatpak and Steam's
pressure-vessel-wrap), the kernel does not allow us to map uid 0, and
the netlink events appear to be from the kernel's overflowuid (typically
65534/nobody), meaning libudev cannot distinguish between genuine uevents
from udevd and an attack by a malicious local user.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Previously we only checked for at least one button or key and at least
the X and Y absolute axes, but this has both false positives and false
negatives.
Graphics tablets, trackpads and touchscreens all have buttons and
absolute X and Y axes, but we don't want to detect those as joysticks.
On normal Linux systems ordinary users do not have access to these
device nodes, but members of the 'input' group do.
Conversely, some game controllers only have digital buttons and no
analogue axes (the Nintendo Wiimote is an example), and some have axes
and no buttons (steering wheels or flight simulator rudders might not
have buttons).
Use the more elaborate heuristic factored out from SDL's udev code path
to handle these cases.
In an ideal world we could use exactly the same heuristic as udev's
input_id builtin, but that isn't under a suitable license for inclusion
in SDL, so we have to use a parallel implementation of something
vaguely similar.
Signed-off-by: Simon McVittie <smcv@collabora.com>
This works on capability bitfields that can either come from udev or
from ioctls, so it is equally applicable to both udev and non-udev
input device detection.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Device enumeration via libudev can fail in a container for two reasons:
* the netlink protocol between udevd and libudev is considered private,
so there is no API guarantee that the version of libudev in a container
will understand netlink messages from a dissimilar version of udevd
on the host system;
* the netlink protocol between udevd and libudev relies for security on
being able to check the uid of each message, but in a container with
a user namespace where host uid 0 is not mapped, the libudev client
cannot distinguish between messages from host uid 0 and messages from
a different, malicious user on the host
To make this easier to experiment with, always compile the fallback
code path even if libudev is disabled. libudev remains the default if
enabled at compile time, but the fallback code path can be forced.
Signed-off-by: Simon McVittie <smcv@collabora.com>
Xbox Elite controllers use AUX1-AUX4 to represent the paddle buttons when using the HIDAPI driver
PS4 and PS5 controllers use AUX1 to represent the touchpad button
Nintendo Switch Pro controllers use AUX1 to represent the capture button
Anthony Pesch
I was looking into my own input bug and noticed an issue in the HIDAPI code while looking over it. I don't have a controller that goes down this path to test and try to provoke the issue, but it looks pretty straight forward.
The memmove to shift the joystick id array on disconnect isn't scaling the size by sizeof(SDL_JoystickID), likely corrupting the ids on disconnect.
Jan Bujak
I wrote a new driver for my gamepad on Linux. I'd like SDL to support it out-of-box, as currently it just treats it as a generic joystick instead of a gamepad. From what I can see the only way to do that is to either 1) pick one of the already supported controllers' PID, VID and button layouts and have my driver send that (effectively lying that it's something else), or 2) submit a preconfigured, hardcoded mapping to SDL.
Both of those, in my opinion, are silly when we already have the Linux Gamepad Specification which standarizes this:
https://www.kernel.org/doc/html/v4.15/input/gamepad.html
Unfortunately SDL doesn't make use of it currently. So I've took it upon myself to add it; patch is in the attachments.
Basically what the patch does is that if SDL finds no built-it controller mappings for a given joystick it then asks the joystick backend to autodetect it, and that uses the relevant evdev bits to figure out which button/axis is which. (See the specs for more details.)
With this patch applied my own driver for my controller works out-of-box with SDL with no extra configuration and is correctly recognized as a gamepad; this is also going to be the case for any other driver which follows the Linux Gamepad Specification.
* 8BitDo N30 Pro 2
* 8BitDo SN30 Gamepad
* 8BitDo SN30 Pro+
* 8BitDo Zero 2
* SZMY-POWER PC Gamepad
* ThrustMaster eSwap PRO Controller
* ZEROPLUS P4 Wired Gamepad
In additional, all 8BitDo controllers use SDL_HINT_GAMECONTROLLER_USE_BUTTON_LABELS to have the correct mapping based on user preferences.
The joystick layer can't necessarily give us perfect centering, but we know
that the game controller level has logical absolute idle positions that have
nothing to do with the physical device.
So send game controller events to make it look like the device is completely
untouched before sending the final removal event.
This driver supports the Razer Atrox Arcade Stick
Some of the quirks of this driver, inherent in Windows Gaming Input:
* There will never appear to be controllers connected at startup. You must support hot-plugging in order to see these controllers.
* You can't read the state of the guide button
* You can't get controller events in the background
meyraud705
On line 220 of SDL_hidapi_xbox360.c https://hg.libsdl.org/SDL/file/4608f0e6e8e3/src/joystick/hidapi/SDL_hidapi_xbox360.c#l220
if (!XINPUTGETSTATE(user_index, &xinput_state[user_index].state) == ERROR_SUCCESS) {
logical not is only applied to the left hand side of this comparison.
I think you mean:
if (XINPUTGETSTATE(user_index, &xinput_state[user_index].state) != ERROR_SUCCESS) {
