[SC64][FW] Added save write count register for SD save writeback

fw/project/lcmxo2/sc64.ldf

@@ -51,6 +51,9 @@
         <Source name="../../rtl/n64/n64_reg_bus.sv" type="Verilog" type_short="Verilog">
             <Options VerilogStandard="System Verilog"/>
         </Source>
+        <Source name="../../rtl/n64/n64_save_counter.sv" type="Verilog" type_short="Verilog">
+            <Options VerilogStandard="System Verilog"/>
+        </Source>
         <Source name="../../rtl/n64/n64_scb.sv" type="Verilog" type_short="Verilog">
             <Options VerilogStandard="System Verilog"/>
         </Source>

fw/rtl/mcu/mcu_top.sv

@@ -354,6 +354,7 @@ module mcu_top (
         REG_DD_HEAD_TRACK,
         REG_DD_SECTOR_INFO,
         REG_DD_DRIVE_ID,
+        REG_SAVE_COUNT,
         REG_VENDOR_SCR,
         REG_VENDOR_DATA,
         REG_DEBUG_0,
@@ -624,6 +625,10 @@ module mcu_top (
                     };
                 end
 
+                REG_SAVE_COUNT: begin
+                    reg_rdata <= {16'd0, n64_scb.save_count};
+                end
+
                 REG_VENDOR_SCR: begin
                     reg_rdata <= vendor_scb.control_rdata;
                 end

fw/rtl/n64/n64_pi.sv

@@ -144,6 +144,7 @@ module n64_pi (
     const bit [31:0] BUFFER_OFFSET      = 32'h0500_0000;
 
     logic [31:0] mem_offset;
+    logic sram_selected;
 
     always_ff @(posedge clk) begin
         if (reset || !pi_reset || end_op) begin
@@ -154,6 +155,7 @@ module n64_pi (
         if (reset) begin
             read_port <= PORT_NONE;
             write_port <= PORT_NONE;
+            sram_selected <= 1'b0;
             reg_bus.dd_select <= 1'b0;
             reg_bus.flashram_select <= 1'b0;
             reg_bus.cfg_select <= 1'b0;
@@ -161,6 +163,7 @@ module n64_pi (
             read_port <= PORT_NONE;
             write_port <= PORT_NONE;
             mem_offset <= 32'd0;
+            sram_selected <= 1'b0;
             reg_bus.dd_select <= 1'b0;
             reg_bus.flashram_select <= 1'b0;
             reg_bus.cfg_select <= 1'b0;
@@ -200,6 +203,7 @@ module n64_pi (
                             read_port <= PORT_MEM;
                             write_port <= PORT_MEM;
                             mem_offset <= (-32'h0800_0000) - {n64_pi_dq_in[3:2], 18'd0} + {n64_pi_dq_in[3:2], 15'd0} + SAVE_OFFSET;
+                            sram_selected <= 1'b1;
                             n64_scb.pi_sdram_active <= 1'b1;
                         end
                     end
@@ -208,6 +212,7 @@ module n64_pi (
                         read_port <= PORT_MEM;
                         write_port <= PORT_MEM;
                         mem_offset <= (-32'h0800_0000) + SAVE_OFFSET;
+                        sram_selected <= 1'b1;
                         n64_scb.pi_sdram_active <= 1'b1;
                     end
                 end
@@ -409,6 +414,7 @@ module n64_pi (
     always_ff @(posedge clk) begin
         write_fifo_read <= 1'b0;
         load_starting_address <= 1'b0;
+        n64_scb.sram_done <= 1'b0;
 
         if (reset || !pi_reset) begin
             mem_bus.request <= 1'b0;
@@ -453,6 +459,7 @@ module n64_pi (
 
             if (end_op) begin
                 read_enabled <= 1'b0;
+                n64_scb.sram_done <= sram_selected && !first_write_op;
             end
         end
     end

fw/rtl/n64/n64_save_counter.sv

@@ -0,0 +1,24 @@
+module n64_save_counter (
+    input clk,
+    input reset,
+
+    n64_scb.save_counter n64_scb
+);
+
+    logic [15:0] counter;
+
+    always_ff @(posedge clk) begin
+        if (reset) begin
+            counter <= 16'd0;
+        end else begin
+            if (n64_scb.eeprom_write || n64_scb.sram_done || n64_scb.flashram_done) begin
+                counter <= counter + 1'd1;
+            end
+        end
+    end
+
+    always_ff @(posedge clk) begin
+        n64_scb.save_count <= counter;
+    end
+
+endmodule

fw/rtl/n64/n64_scb.sv

@@ -30,6 +30,8 @@ interface n64_scb ();
     logic [5:0] flashram_address;
     logic [15:0] flashram_wdata;
 
+    logic sram_done;
+
     logic eeprom_write;
     logic [10:0] eeprom_address;
     logic [7:0] eeprom_rdata;
@@ -51,6 +53,8 @@ interface n64_scb ();
     logic [31:0] cfg_wdata [0:1];
     logic [31:0] cfg_version;
 
+    logic [15:0] save_count;
+
     logic pi_sdram_active;
     logic pi_flash_active;
     logic [35:0] pi_debug;
@@ -92,6 +96,8 @@ interface n64_scb ();
         output cfg_wdata,
         output cfg_version,
 
+        input save_count,
+
         input pi_debug
     );
 
@@ -109,6 +115,8 @@ interface n64_scb ();
         input dd_enabled,
         input ddipl_enabled,
 
+        output sram_done,
+
         input flashram_read_mode,
 
         input cfg_unlock,
@@ -189,6 +197,14 @@ interface n64_scb ();
         input cfg_version
     );
 
+    modport save_counter (
+        input eeprom_write,
+        input sram_done,
+        input flashram_done,
+
+        output save_count
+    );
+
     modport arbiter (
         input pi_sdram_active,
         input pi_flash_active

fw/rtl/n64/n64_top.sv

@@ -94,4 +94,11 @@ module n64_top (
         .n64_si_dq(n64_si_dq)
     );
 
+    n64_save_counter n64_save_counter_inst (
+        .clk(clk),
+        .reset(reset),
+
+        .n64_scb(n64_scb)
+    );
+
 endmodule

sw/controller/src/flashram.c

@@ -35,7 +35,9 @@ static enum operation flashram_operation_type (uint32_t scr) {
 
 
 void flashram_init (void) {
+    if (fpga_reg_get(REG_FLASHRAM_SCR) & FLASHRAM_SCR_PENDING) {
         fpga_reg_set(REG_FLASHRAM_SCR, FLASHRAM_SCR_DONE);
+    }
 }
 
 void flashram_process (void) {

sw/controller/src/fpga.h

@@ -50,6 +50,7 @@ typedef enum {
     REG_DD_HEAD_TRACK,
     REG_DD_SECTOR_INFO,
     REG_DD_DRIVE_ID,
+    REG_SAVE_COUNT,
     REG_VENDOR_SCR,
     REG_VENDOR_DATA,
     REG_DEBUG_0,