mirror of
https://github.com/Polprzewodnikowy/SummerCart64.git
synced 2024-11-25 07:06:52 +01:00
99 lines
3.1 KiB
Markdown
99 lines
3.1 KiB
Markdown
# SummerCart64 Firmware
|
|
|
|
A FPGA firmware written in Verilog for SummerCart64.
|
|
|
|
|
|
# Technical Reference Manual
|
|
|
|
|
|
## Bus peripheral addresses
|
|
|
|
- **`0x1000 0000 - 0x13FF FFFF`** - [R/W] *SDRAM Memory*
|
|
- **`0x1D00 0000 - 0x1D00 07FF`** - [R/W] *EEPROM Memory*
|
|
- **`0x1E00 0000 - 0x1E00 0007`** - [R/W] *Cart Registers*
|
|
|
|
|
|
## Memory spaces
|
|
|
|
### SDRAM Memory
|
|
|
|
Base address: **`0x1000 0000`**\
|
|
Length: **`64 MB`**\
|
|
Access: Read or Write, 2 byte (16 bit) aligned
|
|
|
|
64 MB of SDRAM memory. Available on the bus when **SDRAM** bit in **CART->CR** register is set. Used as ROM storage.
|
|
|
|
### EEPROM Memory
|
|
|
|
Base address: **`0x1D00 0000`**\
|
|
Length: **`2 kB`**\
|
|
Access: Read or Write, 4 byte (32 bit) aligned
|
|
|
|
2 kB of EEPROM Memory. Available on the bus when **EEPROM_PI** bit in **CART->CR** register is set. Used to upload/download EEPROM contents to/from PC.
|
|
|
|
|
|
## Registers
|
|
|
|
### Cart (**CART**) registers
|
|
|
|
Base address: **`0x1E00 0000`**
|
|
|
|
#### Configuration register (**CR**)
|
|
|
|
Address offset: **`0x00`**\
|
|
Powerup value: **`0b0000 0000`**\
|
|
Soft reset value: **`0b00xx x000`**\
|
|
Access: Read or write, 4 byte (32 bit) aligned
|
|
|
|
This register is used to enable or disable various modules available on the cart.
|
|
|
|
31:5 | 4 | 3 | 2 | 1 | 0
|
|
------|------------|-----------|---|----------|---
|
|
0 | EEPROM_16K | EEPROM_EN | 0 | SDRAM_EN | 0
|
|
x | R/W | R/W | x | R/W | x
|
|
|
|
- Bits 31:5: Reserved. Reads as 0, writes are ignored but it's recommended to be set as 0 for future compatibility.
|
|
- Bit 4 **EEPROM_16K**: Sets ID returned by EEPROM to identify itself as 4k or 16k variant.
|
|
- 0: EEPROM 4k variant
|
|
- 1: EEPROM 16k variant
|
|
- Bit 3 **EEPROM_EN**: Enable EEPROM access through SI bus.
|
|
- 0: EEPROM SI access disabled
|
|
- 1: EEPROM SI access enabled
|
|
- Bit 2: Reserved. Reads as 0, writes are ignored but it's recommended to be set as 0 for future compatibility.
|
|
- Bit 1 **SDRAM_EN**: Enable SDRAM access at address base **`0x1000 0000`**. When disabled bootloader flash image is mapped at this address. Cleared by hardware on N64 Reset/NMI event.
|
|
- 0: SDRAM disabled
|
|
- 1: SDRAM enabled
|
|
- Bit 0: Reserved. Reads as 0, writes are ignored but it's recommended to be set as 0 for future compatibility.
|
|
- 0: Flash disabled
|
|
- 1: Flash enabled
|
|
|
|
#### CIC and TV type override register (**CIC_TV**)
|
|
|
|
Address offset: **`0x04`**\
|
|
Powerup value: **`0x0000 0000`**\
|
|
Access: Read or write, 4 byte (32 bit) aligned
|
|
|
|
This register is used for PC -> bootloader communication.
|
|
|
|
31:6 | 5:4 | 3:0
|
|
--------|---------|----------
|
|
SWITCH | TV_TYPE | CIC_TYPE
|
|
R/W | R/W | R/W
|
|
|
|
- Bits 31:6 **SWITCH**: Additional bits that can be passed to bootloader, currently unused.
|
|
- Bits 5:4 **TV_TYPE**: Overrides TV type in bootloader. Used only when **CIC_TYPE** value is valid (values 1 - 7).
|
|
- 0: PAL TV type
|
|
- 1: NTSC TV type
|
|
- 2: MPAL TV type
|
|
- 3: No TV type override - use TV type provided by ROM header
|
|
- Bits 3:0 **CIC_TYPE**: Overrides CIC type in bootloader.
|
|
- 0: No CIC type override - use CIC type determined from ROM bootcode
|
|
- 1: CIC 5101
|
|
- 2: CIC 6101/7102
|
|
- 3: CIC 6102/7101
|
|
- 4: CIC X103
|
|
- 5: CIC X105
|
|
- 6: CIC X106
|
|
- 7: CIC 8303
|
|
- 8 - 15: Same effect as value 0
|