mini/hollywood.h

/*
	mini - a Free Software replacement for the Nintendo/BroadOn IOS.
	Hollywood register definitions

Copyright (C) 2008, 2009	Haxx Enterprises <bushing@gmail.com>
Copyright (C) 2008, 2009	Sven Peter <svenpeter@gmail.com>
Copyright (C) 2008, 2009	Hector Martin "marcan" <marcan@marcansoft.com>
Copyright (C) 2008, 2009	John Kelley <wiidev@kelley.ca>

# This code is licensed to you under the terms of the GNU GPL, version 2;
# see file COPYING or http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
*/

#ifndef __HOLLYWOOD_H__
#define __HOLLYWOOD_H__

/* Hollywood Registers */

#define		HW_PPC_REG_BASE		0xd000000
#define		HW_REG_BASE		0xd800000

// The PPC can only see the first three IPC registers
#define		HW_IPC_PPCMSG		(HW_REG_BASE + 0x000)
#define		HW_IPC_PPCCTRL		(HW_REG_BASE + 0x004)
#define		HW_IPC_ARMMSG		(HW_REG_BASE + 0x008)
#define		HW_IPC_ARMCTRL		(HW_REG_BASE + 0x00c)

#define		HW_TIMER		(HW_REG_BASE + 0x010)
#define		HW_ALARM		(HW_REG_BASE + 0x014)

#define		HW_PPCIRQFLAG		(HW_REG_BASE + 0x030)
#define		HW_PPCIRQMASK		(HW_REG_BASE + 0x034)

#define		HW_ARMIRQFLAG		(HW_REG_BASE + 0x038)
#define		HW_ARMIRQMASK		(HW_REG_BASE + 0x03c)

#define		HW_MEMMIRR		(HW_REG_BASE + 0x060)
#define		HW_AHBPROT		(HW_REG_BASE + 0x064)

// something to do with PPCBOOT
// and legacy DI it seems ?!?
#define		HW_EXICTRL		(HW_REG_BASE + 0x070)
#define		EXICTRL_ENABLE_EXI	1

// PPC side of GPIO1 (Starlet can access this too)
// Output state
#define		HW_GPIO1BOUT		(HW_REG_BASE + 0x0c0)
// Direction (1=output)
#define		HW_GPIO1BDIR		(HW_REG_BASE + 0x0c4)
// Input state
#define		HW_GPIO1BIN		(HW_REG_BASE + 0x0c8)
// Interrupt level
#define		HW_GPIO1BINTLVL		(HW_REG_BASE + 0x0cc)
// Interrupt flags (write 1 to clear)
#define		HW_GPIO1BINTFLAG	(HW_REG_BASE + 0x0d0)
// Interrupt propagation enable
// Do these interrupts go anywhere???
#define		HW_GPIO1BINTENABLE	(HW_REG_BASE + 0x0d4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define		HW_GPIO1BINMIR		(HW_REG_BASE + 0x0d8)
// 0xFFFFFF by default, if cleared disables respective outputs. Top bits non-settable.
#define		HW_GPIO1ENABLE		(HW_REG_BASE + 0x0dc)

#define		HW_GPIO1_SLOT		0x000020
#define		HW_GPIO1_DEBUG		0xFF0000
#define		HW_GPIO1_DEBUG_SH	16

// Starlet side of GPIO1
// Output state
#define		HW_GPIO1OUT		(HW_REG_BASE + 0x0e0)
// Direction (1=output)
#define		HW_GPIO1DIR		(HW_REG_BASE + 0x0e4)
// Input state
#define		HW_GPIO1IN		(HW_REG_BASE + 0x0e8)
// Interrupt level
#define		HW_GPIO1INTLVL		(HW_REG_BASE + 0x0ec)
// Interrupt flags (write 1 to clear)
#define		HW_GPIO1INTFLAG		(HW_REG_BASE + 0x0f0)
// Interrupt propagation enable (interrupts go to main interrupt 0x800)
#define		HW_GPIO1INTENABLE	(HW_REG_BASE + 0x0f4)
//??? seems to be a mirror of inputs at some point... power-up state?
#define		HW_GPIO1INMIR		(HW_REG_BASE + 0x0f8)
// Owner of each GPIO bit. If 1, GPIO1B registers assume control. If 0, GPIO1 registers assume control.
#define		HW_GPIO1OWNER		(HW_REG_BASE + 0x0fc)

// ????
#define		HW_DIFLAGS		(HW_REG_BASE + 0x180)
#define		DIFLAGS_BOOT_CODE	0x100000

// maybe a GPIO???
#define		HW_RESETS		(HW_REG_BASE + 0x194)

#define		HW_CLOCKS		(HW_REG_BASE + 0x1b4)

#define		HW_GPIO2OUT		(HW_REG_BASE + 0x1c8)
#define		HW_GPIO2DIR		(HW_REG_BASE + 0x1cc)
#define		HW_GPIO2IN		(HW_REG_BASE + 0x1d0)

#define		HW_OTPCMD		(HW_REG_BASE + 0x1ec)
#define		HW_OTPDATA		(HW_REG_BASE + 0x1f0)
#define		HW_VERSION		(HW_REG_BASE + 0x214)

/* NAND Registers */

#define		NAND_REG_BASE		0xd010000

#define		NAND_CMD		(NAND_REG_BASE + 0x000)
#define		NAND_STATUS		NAND_CMD
#define		NAND_CONF		(NAND_REG_BASE + 0x004)
#define		NAND_ADDR0		(NAND_REG_BASE + 0x008)
#define		NAND_ADDR1		(NAND_REG_BASE + 0x00c)
#define		NAND_DATA		(NAND_REG_BASE + 0x010)
#define		NAND_ECC		(NAND_REG_BASE + 0x014)
#define		NAND_UNK1		(NAND_REG_BASE + 0x018)
#define		NAND_UNK2		(NAND_REG_BASE + 0x01c)

/* AES Registers */

#define		AES_REG_BASE		0xd020000

#define		AES_CMD			(AES_REG_BASE + 0x000)
#define		AES_SRC			(AES_REG_BASE + 0x004)
#define		AES_DEST		(AES_REG_BASE + 0x008)
#define		AES_KEY			(AES_REG_BASE + 0x00c)
#define		AES_IV			(AES_REG_BASE + 0x010)

/* SHA-1 Registers */

#define		SHA_REG_BASE		0xd030000

#define		SHA_CMD			(SHA_REG_BASE + 0x000)
#define		SHA_SRC			(SHA_REG_BASE + 0x004)
#define		SHA_H0			(SHA_REG_BASE + 0x008)
#define		SHA_H1			(SHA_REG_BASE + 0x00c)
#define		SHA_H2			(SHA_REG_BASE + 0x010)
#define		SHA_H3			(SHA_REG_BASE + 0x014)
#define		SHA_H4			(SHA_REG_BASE + 0x018)

/* SD Host Controller Registers */

#define		SDHC_REG_BASE		0xd070000

/* EXI Registers */

#define		EXI_REG_BASE		0xd806800
#define		EXI0_REG_BASE		(EXI_REG_BASE+0x000)
#define		EXI1_REG_BASE		(EXI_REG_BASE+0x014)
#define		EXI2_REG_BASE		(EXI_REG_BASE+0x028)

#define		EXI0_CSR		(EXI0_REG_BASE+0x000)
#define		EXI0_MAR		(EXI0_REG_BASE+0x004)
#define		EXI0_LENGTH		(EXI0_REG_BASE+0x008)
#define		EXI0_CR			(EXI0_REG_BASE+0x00c)
#define		EXI0_DATA		(EXI0_REG_BASE+0x010)

#define		EXI1_CSR		(EXI1_REG_BASE+0x000)
#define		EXI1_MAR		(EXI1_REG_BASE+0x004)
#define		EXI1_LENGTH		(EXI1_REG_BASE+0x008)
#define		EXI1_CR			(EXI1_REG_BASE+0x00c)
#define		EXI1_DATA		(EXI1_REG_BASE+0x010)

#define		EXI2_CSR		(EXI2_REG_BASE+0x000)
#define		EXI2_MAR		(EXI2_REG_BASE+0x004)
#define		EXI2_LENGTH		(EXI2_REG_BASE+0x008)
#define		EXI2_CR			(EXI2_REG_BASE+0x00c)
#define		EXI2_DATA		(EXI2_REG_BASE+0x010)

#define		EXI_BOOT_BASE		(EXI_REG_BASE+0x040)

/* MEMORY CONTROLLER Registers */

#define		MEM_REG_BASE		0xd8b4000
#define		MEM_PROT		(MEM_REG_BASE+0x20a)
#define		MEM_PROT_START		(MEM_REG_BASE+0x20c)
#define		MEM_PROT_END		(MEM_REG_BASE+0x20e)
#define		MEM_FLUSHREQ		(MEM_REG_BASE+0x228)
#define		MEM_FLUSHACK		(MEM_REG_BASE+0x22a)

#endif