mirror of
https://github.com/fail0verflow/mini.git
synced 2024-11-28 06:04:19 +01:00
180 lines
5.6 KiB
C
180 lines
5.6 KiB
C
/*
|
|
mini - a Free Software replacement for the Nintendo/BroadOn IOS.
|
|
Hollywood register definitions
|
|
|
|
Copyright (C) 2008, 2009 Haxx Enterprises <bushing@gmail.com>
|
|
Copyright (C) 2008, 2009 Sven Peter <svenpeter@gmail.com>
|
|
Copyright (C) 2008, 2009 Hector Martin "marcan" <marcan@marcansoft.com>
|
|
Copyright (C) 2008, 2009 John Kelley <wiidev@kelley.ca>
|
|
|
|
# This code is licensed to you under the terms of the GNU GPL, version 2;
|
|
# see file COPYING or http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
|
|
*/
|
|
|
|
#ifndef __HOLLYWOOD_H__
|
|
#define __HOLLYWOOD_H__
|
|
|
|
/* Hollywood Registers */
|
|
|
|
#define HW_PPC_REG_BASE 0xd000000
|
|
#define HW_REG_BASE 0xd800000
|
|
|
|
// The PPC can only see the first three IPC registers
|
|
#define HW_IPC_PPCMSG (HW_REG_BASE + 0x000)
|
|
#define HW_IPC_PPCCTRL (HW_REG_BASE + 0x004)
|
|
#define HW_IPC_ARMMSG (HW_REG_BASE + 0x008)
|
|
#define HW_IPC_ARMCTRL (HW_REG_BASE + 0x00c)
|
|
|
|
#define HW_TIMER (HW_REG_BASE + 0x010)
|
|
#define HW_ALARM (HW_REG_BASE + 0x014)
|
|
|
|
#define HW_PPCIRQFLAG (HW_REG_BASE + 0x030)
|
|
#define HW_PPCIRQMASK (HW_REG_BASE + 0x034)
|
|
|
|
#define HW_ARMIRQFLAG (HW_REG_BASE + 0x038)
|
|
#define HW_ARMIRQMASK (HW_REG_BASE + 0x03c)
|
|
|
|
#define HW_MEMMIRR (HW_REG_BASE + 0x060)
|
|
#define HW_AHBPROT (HW_REG_BASE + 0x064)
|
|
|
|
// something to do with PPCBOOT
|
|
// and legacy DI it seems ?!?
|
|
#define HW_EXICTRL (HW_REG_BASE + 0x070)
|
|
#define EXICTRL_ENABLE_EXI 1
|
|
|
|
// PPC side of GPIO1 (Starlet can access this too)
|
|
// Output state
|
|
#define HW_GPIO1BOUT (HW_REG_BASE + 0x0c0)
|
|
// Direction (1=output)
|
|
#define HW_GPIO1BDIR (HW_REG_BASE + 0x0c4)
|
|
// Input state
|
|
#define HW_GPIO1BIN (HW_REG_BASE + 0x0c8)
|
|
// Interrupt level
|
|
#define HW_GPIO1BINTLVL (HW_REG_BASE + 0x0cc)
|
|
// Interrupt flags (write 1 to clear)
|
|
#define HW_GPIO1BINTFLAG (HW_REG_BASE + 0x0d0)
|
|
// Interrupt propagation enable
|
|
// Do these interrupts go anywhere???
|
|
#define HW_GPIO1BINTENABLE (HW_REG_BASE + 0x0d4)
|
|
//??? seems to be a mirror of inputs at some point... power-up state?
|
|
#define HW_GPIO1BINMIR (HW_REG_BASE + 0x0d8)
|
|
// 0xFFFFFF by default, if cleared disables respective outputs. Top bits non-settable.
|
|
#define HW_GPIO1ENABLE (HW_REG_BASE + 0x0dc)
|
|
|
|
#define HW_GPIO1_SLOT 0x000020
|
|
#define HW_GPIO1_DEBUG 0xFF0000
|
|
#define HW_GPIO1_DEBUG_SH 16
|
|
|
|
// Starlet side of GPIO1
|
|
// Output state
|
|
#define HW_GPIO1OUT (HW_REG_BASE + 0x0e0)
|
|
// Direction (1=output)
|
|
#define HW_GPIO1DIR (HW_REG_BASE + 0x0e4)
|
|
// Input state
|
|
#define HW_GPIO1IN (HW_REG_BASE + 0x0e8)
|
|
// Interrupt level
|
|
#define HW_GPIO1INTLVL (HW_REG_BASE + 0x0ec)
|
|
// Interrupt flags (write 1 to clear)
|
|
#define HW_GPIO1INTFLAG (HW_REG_BASE + 0x0f0)
|
|
// Interrupt propagation enable (interrupts go to main interrupt 0x800)
|
|
#define HW_GPIO1INTENABLE (HW_REG_BASE + 0x0f4)
|
|
//??? seems to be a mirror of inputs at some point... power-up state?
|
|
#define HW_GPIO1INMIR (HW_REG_BASE + 0x0f8)
|
|
// Owner of each GPIO bit. If 1, GPIO1B registers assume control. If 0, GPIO1 registers assume control.
|
|
#define HW_GPIO1OWNER (HW_REG_BASE + 0x0fc)
|
|
|
|
// ????
|
|
#define HW_DIFLAGS (HW_REG_BASE + 0x180)
|
|
#define DIFLAGS_BOOT_CODE 0x100000
|
|
|
|
// maybe a GPIO???
|
|
#define HW_RESETS (HW_REG_BASE + 0x194)
|
|
|
|
#define HW_CLOCKS (HW_REG_BASE + 0x1b4)
|
|
|
|
#define HW_GPIO2OUT (HW_REG_BASE + 0x1c8)
|
|
#define HW_GPIO2DIR (HW_REG_BASE + 0x1cc)
|
|
#define HW_GPIO2IN (HW_REG_BASE + 0x1d0)
|
|
|
|
#define HW_OTPCMD (HW_REG_BASE + 0x1ec)
|
|
#define HW_OTPDATA (HW_REG_BASE + 0x1f0)
|
|
#define HW_VERSION (HW_REG_BASE + 0x214)
|
|
|
|
/* NAND Registers */
|
|
|
|
#define NAND_REG_BASE 0xd010000
|
|
|
|
#define NAND_CMD (NAND_REG_BASE + 0x000)
|
|
#define NAND_STATUS NAND_CMD
|
|
#define NAND_CONF (NAND_REG_BASE + 0x004)
|
|
#define NAND_ADDR0 (NAND_REG_BASE + 0x008)
|
|
#define NAND_ADDR1 (NAND_REG_BASE + 0x00c)
|
|
#define NAND_DATA (NAND_REG_BASE + 0x010)
|
|
#define NAND_ECC (NAND_REG_BASE + 0x014)
|
|
#define NAND_UNK1 (NAND_REG_BASE + 0x018)
|
|
#define NAND_UNK2 (NAND_REG_BASE + 0x01c)
|
|
|
|
/* AES Registers */
|
|
|
|
#define AES_REG_BASE 0xd020000
|
|
|
|
#define AES_CMD (AES_REG_BASE + 0x000)
|
|
#define AES_SRC (AES_REG_BASE + 0x004)
|
|
#define AES_DEST (AES_REG_BASE + 0x008)
|
|
#define AES_KEY (AES_REG_BASE + 0x00c)
|
|
#define AES_IV (AES_REG_BASE + 0x010)
|
|
|
|
/* SHA-1 Registers */
|
|
|
|
#define SHA_REG_BASE 0xd030000
|
|
|
|
#define SHA_CMD (SHA_REG_BASE + 0x000)
|
|
#define SHA_SRC (SHA_REG_BASE + 0x004)
|
|
#define SHA_H0 (SHA_REG_BASE + 0x008)
|
|
#define SHA_H1 (SHA_REG_BASE + 0x00c)
|
|
#define SHA_H2 (SHA_REG_BASE + 0x010)
|
|
#define SHA_H3 (SHA_REG_BASE + 0x014)
|
|
#define SHA_H4 (SHA_REG_BASE + 0x018)
|
|
|
|
/* SD Host Controller Registers */
|
|
|
|
#define SDHC_REG_BASE 0xd070000
|
|
|
|
/* EXI Registers */
|
|
|
|
#define EXI_REG_BASE 0xd806800
|
|
#define EXI0_REG_BASE (EXI_REG_BASE+0x000)
|
|
#define EXI1_REG_BASE (EXI_REG_BASE+0x014)
|
|
#define EXI2_REG_BASE (EXI_REG_BASE+0x028)
|
|
|
|
#define EXI0_CSR (EXI0_REG_BASE+0x000)
|
|
#define EXI0_MAR (EXI0_REG_BASE+0x004)
|
|
#define EXI0_LENGTH (EXI0_REG_BASE+0x008)
|
|
#define EXI0_CR (EXI0_REG_BASE+0x00c)
|
|
#define EXI0_DATA (EXI0_REG_BASE+0x010)
|
|
|
|
#define EXI1_CSR (EXI1_REG_BASE+0x000)
|
|
#define EXI1_MAR (EXI1_REG_BASE+0x004)
|
|
#define EXI1_LENGTH (EXI1_REG_BASE+0x008)
|
|
#define EXI1_CR (EXI1_REG_BASE+0x00c)
|
|
#define EXI1_DATA (EXI1_REG_BASE+0x010)
|
|
|
|
#define EXI2_CSR (EXI2_REG_BASE+0x000)
|
|
#define EXI2_MAR (EXI2_REG_BASE+0x004)
|
|
#define EXI2_LENGTH (EXI2_REG_BASE+0x008)
|
|
#define EXI2_CR (EXI2_REG_BASE+0x00c)
|
|
#define EXI2_DATA (EXI2_REG_BASE+0x010)
|
|
|
|
#define EXI_BOOT_BASE (EXI_REG_BASE+0x040)
|
|
|
|
/* MEMORY CONTROLLER Registers */
|
|
|
|
#define MEM_REG_BASE 0xd8b4000
|
|
#define MEM_PROT (MEM_REG_BASE+0x20a)
|
|
#define MEM_PROT_START (MEM_REG_BASE+0x20c)
|
|
#define MEM_PROT_END (MEM_REG_BASE+0x20e)
|
|
#define MEM_FLUSHREQ (MEM_REG_BASE+0x228)
|
|
#define MEM_FLUSHACK (MEM_REG_BASE+0x22a)
|
|
|
|
#endif
|