Calling open() on input devices can generate device I/O which blocks
the main thread and causes dropped frames. Using stat() we can avoid
opening anything unless /dev/input has changed since we last polled.
We could have used something fancy like inotify, but it didn't seem
worth the added complexity for this uncommon non-udev case.
alexrice999
I have a knock off wired xbox 360 controller called afterglow for xbox 360 controller. Despite there being a few afterglow controllers in the controller mapping the guid of my controller seems to map to Generic Xbox pad. This binding is as follows:
```
"030000006f0e00001304000000010000,Generic X-Box pad,a:b0,b:b1,back:b6,dpdown:h0.4,dpleft:h0.8,dpright:h0.2,dpup:h0.1,guide:b8,leftshoulder:b4,leftstick:a0,lefttrigger:a2,leftx:a0,lefty:a1,rightshoulder:b5,rightstick:a3,righttrigger:a5,rightx:a3,righty:a4,start:b7,x:b2,y:b3,",
```
When running openmw I have a strange issue that the joysticks work for up and down movements but not for side to side. I managed to track this down to the side to side events being classified as joystick events instead of gamepad events.
I believe this is due to both "leftstick" and "leftx" being bound to "a0" which seems odd to me. If I change openmw's mappings to remove these the controller works as expected. I was hoping someone who knows a lot more than me (as I have only been exploring this today trying to fix my controller) would know what is happening
daniel.c.sinclair
Hi, this patch breaks dpad/hat input on my PS4 controller. The attached patch restores functionality. Calling SDL_PrivateJoystickHat() at the end of BSD_JoystickUpdate was setting the hat state to zero on every kind of input, instead of just the HUG_DPAD events.
It causes the HIDAPI devices to always be opened on enumeration, which causes crashes in the Windows drivers when multiple applications are reading and writing at the same time. We can revisit this after 2.0.10 release.
The Nintendo USB GameCube Adapter has two USB connectors. Black for data
and grey for additional power for rumble. The Wii U and other software
require both cables to use rumble. The rumble is weaker without the
second USB cable. Other than that I don't know if there is any negative
side affects from using rumble with only one cable.
Also implemented SDL_JoystickGetDevicePlayerIndex() on iOS and tvOS, and added support for reading the new menu button state available in iOS and tvOS 13.
Matteo Beniamino
Pressing a trigger button on a Steam Controller causes a segmentation fault both with stable version and latest mercurial head on Linux. I'm using the recent hid_steam kernel module with lizard_mode disabled (that is no keyboard/mouse emulation). I suspect this is what's happening: the driver exposes two hats. The two hats have indices 0 and 2. Inside linux/SDL_sysjoystick.c two hats are allocated in allocate_hatdata for joystick->hwdata->hats. In HandleHat function the hat parameter (that can be 2) is directly used as the index of the array that only has two elements, causing an out of bounds access. SDL is not expecting to have "holes" between hats indices.
The index 2 is calculated in HandleInputEvents() as (ABS_HAT2X - ABS_HAT0X) / 2 where ABS_HAT2X is the value associated to the hat inside the hid_steam module.
This device is a copy of the Xbox Controller S and currently the one most sold
when shopping for a 'new' Xbox gamepad on eBay and AliExpress.
Except for the quirky USB ID id behaves just like a normal Xbox controller (when
ignoring the subpar build quality)
This device is a copy of the Xbox Controller S and currently the one most sold
when shopping for a 'new' Xbox gamepad on eBay and AliExpress.
Except for the quirky USB ID id behaves just like a normal Xbox controller (when
ignoring the subpar build quality)
Noam Preil
In src/joystick/linux/SDL_sysjoystick.c:
The ConfigJoystick function's axes detection starts with a for loop using an index i for Linux's axes names. When i gets to ABS_HAT0X, it's set to ABS_HAT3Y and a continue statement appears, to skip the hats. This makes sense, as SDL handles hats separately from axes.
However, in PollAllValues, *two* indices are used: a and b. Both start out the same, and remain so until the hats are reached. At that point, a becomes identical to the i from ConfigJoystick's loop, but b is equal to a - (ABS_HAT3Y - ABS_HAT0X), or a - 8.
While all the joystick->hwdata->abs_* structures in ConfigJoystick used i - which would here be a - as both the index and the ioctl argument, PollAllValues uses b for the structure index and a as the ioctl argument.
It would appear, however, that no joystick HAS such axes, and that the b index is entirely unnecessary.
I tested three separate joysticks, and while that was far from a complete listing, I was unable to find a joystick with an axis above 0x08.
Dexter Friedman
When using a Dualshock 4 controller (model numbers CUH-ZCT1U and CUH-ZCT2U), pressing anywhere on the center touchpad does not send an SDL_JOYBUTTONDOWN event. I have verified this with testjoystick:
Repro steps:
1. Plug in a DS4 over USB
2. Compile testjoystick and run: testjoystick.exe 0
3. Press and hold the touchpad. Observe that no lime green box appears
Expected behavior:
A lime green box appears while the touchpad is pressed.
Notes:
I've attached a patch here that works on my PC and produces the expected behavior in testjoystick, for both DS4 model numbers I listed earlier.
If I understand correctly, by exposing this as a joystick button, the gamecontroller API mapping can be modified with a change to gamecontrollerdb.txt in the future.
The Nintendo USB GameCube adapter has four controller ports. Return
the port number as 0 to 3 from SDL_JoystickGetPlayerIndex() and
SDL_JoystickGetDevicePlayerIndex().
Thomas Frohwein
Hi,
If a gamepad lists the Dpad as 4 buttons (Dpad Up,Down, Left, Right) like with the Xbox 360 gamepad / XInput report descriptor used by OpenBSD (https://github.com/openbsd/src/blob/master/sys/dev/usb/uhid_rdesc.h#L184), this is not recognized by the SDL BSD backend and no hat or any other listing for the D-pad exists, e.g. in sdl2-jstest (https://gitlab.com/sdl-jstest/sdl-jstest).
The attached diff fixes this and makes the D-pad on my Xbox 360 and Logitech F310 controllers usable. It adds a hat to nhats when usage HUG_DPAD_UP is found, reads the state of the D-pad buttons into array dpad[], and turns the value of dpad[] into an SDL hat direction (dpad_to_sdl()).
Tested and works with Xbox 360 controller and Logitech F310 in XInput mode. Software-side tested with sdl2-jstest and Owlboy where this worked without problems or regressions.
I don't know if this would be applicable to other *BSDs and don't have an install to test it with, therefore wrapped it in __OpenBSD__ ifdefs.
Thanks,
thfr
Note that a single USB device is responsible for all 4 joysticks, so a large
rewrite of the DeviceDriver functions was necessary to allow a single device to
produce multiple joysticks.
Daniel Gibson
Even though my game (dhewm3) doesn't use SDL_INIT_JOYSTICK, SDL_PumpEvent() calls SDL_JoystickUpdate() which ends up calling hid_enumerate() every three seconds, and sometimes on my Win7 box hid_enumerate() takes about 5 seconds, which causes the whole game to freeze for that time.
maxxus
The Dualshock 3's motion sensors don't seem to be reported by the call to EVIOCGBIT but they still send EV_ABS events. Because they're not reported by EVIOCGBIT they're not assigned a proper axis ids and the default of 0 is used, which is the valid id for the left analog sticks left/right axis.
Adds controller bindings to support the "Xbox One Wireless Controller
(Model 1708)" on Linux. The Model 1708 was released in 2016 alongside the
Xbox One S. It is the current model being sold by Microsoft as of writing.
(October 22, 2018)
src/vendor/SDL2/src/joystick/bsd/SDL_sysjoystick.c:353:5: error:
ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
reported by 'bch' at https://discourse.libsdl.org/t/25231
Include guards in most changed files were missing, I added them keeping
the same style as other SDL files. In some cases I moved the include
guards around to be the first thing the header has to take advantage of
any possible improvements compiler may have for inclusion guards.
If we run into problems where these events aren't dispatched (initialized on a different thread than the main thread?) we may need to create a separate thread to handle device notifications like we do with the windows joystick subsystem.
The code is now reliant on SDL_PrivateJoystickAdded() and SDL_PrivateJoystickRemoved() being called correctly when devices are added or removed on Windows
src/joystick/hidapi/SDL_hidapijoystick.c: In function 'HIDAPI_InitializeDiscovery':
src/joystick/hidapi/SDL_hidapijoystick.c:281: error: 'true' undeclared (first use in this function)
src/joystick/hidapi/SDL_hidapijoystick.c:281: error: (Each undeclared identifier is reported only once
src/joystick/hidapi/SDL_hidapijoystick.c:281: error: for each function it appears in.)
src/joystick/hidapi/SDL_hidapijoystick.c: In function 'HIDAPI_UpdateDiscovery':
src/joystick/hidapi/SDL_hidapijoystick.c:339: error: 'true' undeclared (first use in this function)
src/joystick/hidapi/SDL_hidapijoystick.c:341: error: ISO C90 forbids mixed declarations and code
These are entirely untested
Several USB ids refer to multiple packaged products. In those cases I tried to use the most common name, or a general name (e.g. PS3 Controller), or a completely generic name (e.g. USB gamepad) if it wasn't clear what type of controller it was.
Patches welcome!
