This was causing two symptoms/bugs:
* OSCR_LOG.txt was being spammed with random data.
* The size of OSCR_LOG.txt would get so big that copying the log would take a long time, possibly minutes. Oftentimes this caused the display to appear to hang after searching for the CRC (after "->") but before displaying the result.
If using the global log and a version of master since e61ac414d8 you should delete OSCR_LOG.txt from your SD card as it will likely be very large and continue to cause dumping to be slow.
* Reduced PROGMEM / DRAM usage slightly (Using defaults w/HW5: Before -> 214,668 bytes / 5,757 bytes; After -> 213,414 bytes / 5,751 bytes)
* Optimized some menu options and calls
* Added more string constants and implemented them where found.
* Fixed some stylization
* Constants should always be uppercase.
* Features should use the `ENABLE_<feature name>` format.
* Options for features should use the `OPTION_<feature name>_<option name>` format.
* Added ENUMs for more clarity and better type checking.
* Moved some defines over to `constexpr` and `const` types. These are preferred over preprocessor constants when not intended for use with `#if` and other preprocessor language.
A sample `config.txt` is in the SD folder. Currently the option is disabled by default and must be enabled.
Also:
* Eliminated the 5V spike at boot when VSELECT is installed and enabled. See discussion #906
* Fixed a warning in `MD.ino`
* Did some code cleanup, more cleanup to come.
Function didn't display negative calibration factors correctly.
Also added option to use the calibration factor without enabling the calibration menu to save some space.
Unable to actually test this myself because I do not have a HW3 to test on. However, looking at the schematic, if the EEP switch is set to the off position then the pin will be floating and the result of the 1K resistor test will be random.
DS1307 does not seem to have the lost lostPower function. So the time does not get set on upload and needs to be set manually as described in the [wiki](https://github.com/sanni/cartreader/wiki/Real%E2%80%90Time-Clock#setting-the-time).
In Config.h set like this:
````
#define RTC_installed
//#define DS3231
#define DS1307
````
Connect "Tiny RTC I2C module" or similar to the SDA/SCL/VCC/GND pins.
