mika-n
e97c767560
Tweaked "runCalib=false" check for Nacon gamepads. Nowadays there are Nacon gamepads with full PS4 compatible gyro, so by default run calibration by default. Skip the gyro calib only for the couple old supported Nacon gamepads for which this "skip runcalib check" was supposed to be here (not sure if this check is required at all)
2019-12-15 20:21:55 +02:00
Travis Nickles
e89c8b6c3a
Added identifier name to meta info
...
Related to issue #816
2019-09-07 08:29:25 -05:00
Travis Nickles
114b07699a
Create CRC table in ControlService
2019-09-06 09:41:55 -05:00
Travis Nickles
78dcbe666c
Added Razer Raiju Tournament Edition support
...
Related to issue #580
2019-04-29 22:17:15 -05:00
mika-n
746587ebbd
Brute force timer fix to the "stuck rumble motor" bug in ViGem virtual gamepad driver. This rumble autostop timer should be removed when a signed ViGem driver has a fix to this issue. Existing autostop timer is 2 secs, so this assumes that game keeps on updating a rumble values at least once in 2 secs. If rumble-0 event is lost or game doesn't send a new rumble value within 2 secs then rumble motor is automagically stopped (=assumed it is stuck). Usually games keep on sending rumble values as long an effect needs it, so this autostop timer works reasonable good in most games.
2019-04-06 15:04:21 +03:00
Travis Nickles
b536ca3a83
Fixed SonyWA disconnect on Windows 7
...
Was broken since 1.6.4 with change to sending
output packets
2019-03-13 18:41:10 -05:00
Travis Nickles
2497ced5d5
Change main report routine to use custom delegate.
...
Remove the need to box and unbox data every gamepad poll.
Seems to help with performance.
2019-02-24 15:03:12 -06:00
mika-n
7da6b3434a
Merge branch 'jay' of https://github.com/Ryochan7/DS4Windows into jay
2019-02-19 15:09:00 +02:00
mika-n
8d087b01ff
merge conflicts with base branch
2019-02-19 15:00:17 +02:00
Travis Nickles
f828eb888c
Use struct reference rather than copy
2019-02-19 03:16:42 -06:00
Travis Nickles
ec71282ce3
Changed DS4Color to use IEquatable interface
...
Allows for faster Equals method than the previous
implementation
2019-01-16 05:07:19 -06:00
Travis Nickles
df1ec44f1c
Fixed volume updating when sending timeout output reports
2019-01-16 04:08:51 -06:00
mika-n
13607ebc7c
Merge branch 'jay' of https://github.com/Ryochan7/DS4Windows into jay
2019-01-13 21:26:50 +02:00
Travis Nickles
2fe34afe2f
More removal of old haptic related items
2019-01-10 19:07:49 -06:00
Travis Nickles
f887f334df
Remove some unused fields and methods
2019-01-10 18:37:39 -06:00
Travis Nickles
2c471e6eff
Change how haptic state changes happen
2019-01-10 18:15:14 -06:00
Travis Nickles
eb45a6c06c
Minor tweak
2019-01-09 23:57:22 -06:00
Travis Nickles
a253daa95d
Minimize influence of stopwatch
2019-01-09 19:30:05 -06:00
Travis Nickles
18c27b7f10
Corrections to output packet changes
2019-01-09 05:41:20 -06:00
Travis Nickles
bc9a7c3e65
Change priority of output threads
2019-01-09 04:24:29 -06:00
Travis Nickles
cceaa31404
Send output packet at least once every 4 seconds
...
Best attempt at resolving issue #399 .
2019-01-09 03:45:39 -06:00
mika-n
94d5f83db1
Added config options of sixaxis steering wheel emulation and calibration btn to config GUI form (Options). If controller is calibrated via this config screen then there is no need to define "calibrate" special action key. Improved >360 turn range calculation. Added possibility to map SA steering values to L2+R2 trigger axis (Z-axis). For example in ETS2/ATS game controller settings it is possible to use that axis for steering if triggers are not used for throttling and braking (this would leave all axis of L and R thumbstick available for other purposes).
2018-12-07 00:09:09 +02:00
mika-n
1eed418022
Added support for 180/360/720/900/1440 turn range (or any other turn range between 90-3240 degrees). New SASteeringWheelEmulationRange profile option with int32 value (default 360).
2018-12-04 00:50:37 +02:00
mika-n
a933eae0a9
New "360 degree gyro steering wheel emulation" functionality. This works best if the DS4 controller is mounted on a "DoItYourself steering wheel rig" (ie. controller attached at a tip of a plastic or wooden pipe which acts as a "steering shaft". This way the controller turns around like a steering wheel and gyro sensor values are more consistent).
...
At this point there is no GUI to enable this, so you should edit a profile XML file (fex default.xml profile) with Notepad and add <SASteeringWheelEmulationAxis>LXPos</SASteeringWheelEmulationAxis> entry.
Accepted values are None, LXPos, LYPos, RXPos, RYPos) which indicates which X360 axis is used for steering wheel values (ie. gyro tilt converted as steering wheel turning range values). The normal behaviour of this axis should be set as "unmapped" to avoid conflicting values. If steering wheel axis is LX then LY axis is still available for other purposes.
2018-11-17 01:41:21 +02:00
Travis Nickles
dedb1c9ad9
Manually calculate device latency average
2018-11-16 05:24:47 -06:00
Travis Nickles
db859fb4db
Changed test rumble check to remove implicit data coercion
2018-11-11 04:56:10 -06:00
Travis Nickles
49d24fce7d
Testing new output report copying thread for USB and SONYWA
2018-10-26 20:58:43 -05:00
Travis Nickles
e3ed777682
Removed unnecessary array copy for USB and SONYWA connections
2018-10-26 01:37:51 -05:00
Travis Nickles
32605524ff
Added flag to allow skipping a lock when applicable
2018-10-25 02:51:50 -05:00
Travis Nickles
ce78793dea
Removed old unused field
2018-10-25 01:37:26 -05:00
Travis Nickles
60a0f3fda0
Fixed device event queueing
2018-10-15 03:01:13 -05:00
Travis Nickles
af4425763d
Added some optimizations
2018-10-11 03:38:52 -05:00
Travis Nickles
1019499612
Resolve name collision with Log class and Diagnostics namespace
...
Makes app snappier
2018-09-29 04:42:22 -05:00
Travis Nickles
ac360c426d
Fixed issue with SONYWA connections having invalid calibration data
2018-08-20 13:14:34 -05:00
Travis Nickles
6f5b17ac37
Remove ui thread from unplug routine
...
Hotplug routine was starting before removal routine
was being started. No blocking was happening anyway
2018-08-20 04:35:41 -05:00
Travis Nickles
5a4ed6c440
Merge branch 'jay' into udpserver
2018-07-23 00:06:16 -05:00
Travis Nickles
a6e6b5279c
Added unsafe back to sixaxis method
2018-07-22 02:52:42 -05:00
Travis Nickles
d1f124870f
Revert "Use unsafe for accessing gyro and accel arrays"
...
This reverts commit e99e0afe17
2018-07-22 01:23:16 -05:00
Travis Nickles
e6ac109616
Revert "Removed extra fixed block. Moved method call"
...
This reverts commit f906178b5b
2018-07-22 01:22:42 -05:00
Travis Nickles
5c9aec9bd1
Revert "Lower latency buffer to 10 items"
...
This reverts commit 11c7f03244
2018-07-22 01:22:13 -05:00
Travis Nickles
11c7f03244
Lower latency buffer to 10 items
2018-07-21 00:55:16 -05:00
Travis Nickles
f906178b5b
Removed extra fixed block. Moved method call
2018-07-20 05:05:20 -05:00
Travis Nickles
e99e0afe17
Use unsafe for accessing gyro and accel arrays
2018-07-20 04:52:45 -05:00
Travis Nickles
239b9bceba
Merge branch 'jay' into udpserver
2018-07-17 23:53:14 -05:00
Travis Nickles
f44cc21688
Minor tweak
2018-07-10 01:18:27 -05:00
Travis Nickles
1171a56a6b
Make sure calib routine can be skipped on update serial routine
...
Might not be needed
2018-07-10 00:57:55 -05:00
Travis Nickles
cfa2bea4be
Minor tweak for skipping calibration that .NET likes better
...
Related to issue #330 .
2018-07-10 00:46:25 -05:00
Yuki-nyan
3ae386cb7c
Add support for the Nacon Revolution Pro Controller 2 & disable SixAxis calibrations for Nacon controllers as a preliminary fix for broken support.
2018-06-23 22:04:29 +01:00
Travis Nickles
b596d82573
Merge branch 'jay' into udpserver
2018-06-04 14:08:57 -05:00
Travis Nickles
5cd84ecb5a
Added some const
2018-05-28 15:06:48 -05:00
