Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer.
We had earlier tried to fix this by using vkCmdUpdateBuffer however this caused significant performance loss due to an oversight in Adreno drivers. We could have worked around this simply by using vkCmdCopy buffer however there would still be a performance loss due to renderpasses being split up with copies inbetween.
To avoid this we introduce 'megabuffers', a brand new technique not done before in any other switch emulators. Rather than replaying the copies in sequence on the GPU, we take advantage of the fact that buffers are generally small in order to replay buffers on the GPU instead. Each write and subsequent usage of a buffer will cause a copy of the buffer with that write, and all prior applied to be pushed into the megabuffer, this way at the start of execute the megabuffer will hold all used states of the buffer simultaneously. Draws then reference these individual states in sequence to allow everything to work without any copies. In order to support this buffers have been moved to an immediate sync model, with synchronisation being done at usage-time rather than execute (in order to keep contents properly sequenced) and GPU-side writes now need to be explictly marked (since they prevent megabuffering). It should also be noted that a fallback path using cmdCopyBuffer exists for the cases where buffers are too large or GPU dirty.
As bindings weren't correctly handled due to the fact that `EmitSPIRV` would change the bindings, the shader module cache would not correctly function and have no cache hits in `find` and rather have them in `try_emplace` which negated any performance benefit of it. This has now been fixed by retaining the initial cache key for insertion into the cache while also storing the post-emit bindings and restoring them during a cache hit.
Implements caching of the compiled shader module (`VkShaderModule`) in an associative map based on the supplied IR, bindings and runtime state to avoid constant recompilation of shaders. This doesn't entirely address shader compilation as an issue since host shader compilation is tied to Vulkan pipeline objects rather than Vulkan shader modules, they need to be cached to prevent costly host shader recompilation.
This implements the first step of a full shader cache with caching any IR by treating the shared pointer as a handle and key for an associative map alongside hashing the Maxwell shader bytecode, it supports both single shader program and dual vertex program caching.
We desire the ability to hash and check equality of data across spans to use associative containers such as `std::unordered_map` with spans. The implemented functions provide an easy way to do that.
Mostly based off of yuzu's implementation, this will need to be extended in the future to open up a UI for configuring controllers according to the applications requirements.
As there was no check for the lack of a `GuestTexture`/`GuestBuffer`, it would lead to UB when a texture/buffer that had no guest such as the `zeroTexture` from `GraphicsContext` would be marked as dirty they would cause a call to `NCE::RetrapRegions` with a `nullptr` handle that would be dereferenced and cause a segmentation fault.
In certain situations such as constant buffer updates, we desire to use the guest buffer as a shadow buffer forwarding all writes directly to it while we update the host using inline buffer updates so they happen in-sequence. This requires special behavior as we cannot let any synchronization operations take place as they would break the shadow buffer, as a result, an external synchronization flag has been added to prevent this from happening.
It should be noted that this flag is not respected for buffer recreation which will lead to UB, this can and will break updates in certain cases and this change isn't complete without buffer manager support.
The offset of the view wasn't added to the `vkCmdUpdateBuffer`, this would cause the offset to be incorrect given the buffer was a view of a larger buffer that wasn't the start of it. This commit fixes that by adding the offset of the view to the buffer update.
We didn't call `MarkGpuDirty` on textures/buffers prior to GPU usage, this would cause them to not be R/W protected when they should be and provide outdated copies if there were any read accesses from the CPU (which are not possible at the moment since we assume all accesses are writes at the moment). This has now been fixed by calling it after synchronizing the resource.
The terminology "Non-Graphics pass" was deemed to be fairly inaccurate since it simply covered all Vulkan commands (not "passes") outside the render-pass scope, these may be graphical operations such as blits and therefore it is more accurate to use the new terminology of "Outside-RenderPass command" due to the lack of such an implication while being consistent with the Vulkan specification.
Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer. Fix this by updating cbufs on the GPU/CPU seperately, only ever syncing them back at the start or after a guest side CPU write, at the moment only a single word is updated at a time however this can be optimised in the future to batch all consecutive updates into one large one.
We require certain buffers to only be on the host while being accessible through the same abstractions as a guest buffer as they must be interchangeable in usage.
We needed to block stack frame lookups past JNI code as Java doesn't follow the ARMv8 frame pointer ABI which leads to invalid pointer dereferences. Any JNI function that throws or handles exceptions must do this now or it may lead to a `SIGSEGV`.
Some games may pass empty TICs as inputs to shaders while not actually using them within the shader. Create an empty texture and pass this in instead when we hit this case, the nullDescriptor feature could be used but it's not supported by all devices so we chose to do it this way instead.
Skyline's `exception` class now stores a list of all stack frames during the invocation of the exception. These can later be parsed by the exception handler to generate a human-readable stack trace. To assist with more complete stack traces, `-fno-omit-frame-pointer` is now passed on debug builds which forces the inclusion of frames on function calls.
NCE is implicitly depended on by the `GPU` class due to the NCE Memory Trapping API so the destruction of it must take place after the destruction of the `GPU` class. Additionally, to prevent bugs the NCE destructor must set `staticNce` to `nullptr` as the signal handler will potentially access a destroyed instance of NCE otherwise.
Without this sRGB textures would be interpreted as RGB leading to colours being slighly off. The sRGB flag isn't stored as part of format word so we reuse the _pad_ field of it to store the flag for the switch case.
We don't want to actually exit the process as it'll automatically be restarted gracefully due to a timeout after being unable to exit within a fixed duration so we just want to infinite sleep during termination. This should fix issues where exiting any game would cause the app to force close after some time as exception signal handling would fail in the background, the app should stay open now and automatically restart itself when another game is loaded in.
A lot of logs are incomplete due to being unable to flush inside the signal handler, now we flush after any exceptions so that there is a guarantee of any exceptions being logged as this is crucial for proper debugging.
B5G6R5 isn't generally supported by the swapchain and the format is used for R5G6B5 with swapped R/B channels to avoid aliasing so we reverse that by using R5G6B5 as the underlying Vulkan format for the swapchain which should be automatically handled by the driver for any copies from B5G6R5 textures and the data representation should be the same as B5G6R5 with swapped R/B channels so not reporting the correct texture::Format should be fine.
The DMA engine is used to perform DMA buffer/texture copies directly on the GPU. It can deswizzle arbritary regions of input textures, perform component remapping and swizzle into output textures.
This impl only supports 1D buffer copies, 2D ones will come later.
If we have a Nx1x1 image then determining the type from dimensions will result in a 1D image being created thus preventing us from creating a 2D view. By using the image view type we can avoid this for textures from TICs since we know in advance how they will be used
