Certain resources can be attached to an empty `Submit` with no nodes, this can cause it to become a false dependency and not be removed till the next non-empty submission. This has now been fixed by doing a reset regardless of if any nodes exist.
The GPU inline copy callback was broken for `Buffer::Write` as it wasn't always called when it needed to be and didn't handle attaching of the buffer to the executor which would cause it to be unlocked. This commit addresses both of these issues, it introduces a `AttachLockedBuffer` method to attach an already locked buffer to the executor.
The FPS is implicitly bound to the refresh rate due to the timestamp being that of the presentation time, this leads to a misleading FPS figure for disabled frame throttling. It has now been fixed by using the frame submission time rather than the presentation time when frame throttling is disabled and to make this more apparent the color of the OSD FPS has been changed.
All `Packed` formats have their components stored in the opposite ordering to the label, this was not followed for `IsAdrenoAliasCompatible` prior and the ordering has now been flipped.
A deadlock was caused by holding `trapMutex` while waiting on the lock of a resource inside a callback while another thread holding the resource's mutex waits on `trapMutex`. This has been fixed by no longer allowing blocking locks inside the callbacks and introducing a separate callback for locking the resource which is done after unlocking the `trapMutex` which can then be locked by any contending threads.
The `end` pointer for `interval` was incorrectly calculated as `interval.data() + interval.size_bytes()` which would be incorrect when the interval span type is not `u8` as the pointer derived from `interval.data()` would be a pointer to the span type rather than a byte pointer and be subject to arithmetic of that object's size rather than in terms of a byte.
We generally don't need to lock the `Texture`/`Buffer` in the trap handler, this is particularly problematic now as we hold the lock for the duration of a submission of any workloads. This leads to a large amount of contention for the lock and stalling in the signal handler when the resource may be `Clean` and can simply be switched over to `CpuDirty` without locking and utilizing atomics which is what this commit addresses.
We utilized a `FenceCycle` to keep track of if the buffer was mutable or not and introduced another cycle to track GPU-side requirements only on fulfillment of which could the buffer be utilized on the host but due to the recent change in the behavior this system ended up being unoptimal.
This commit replaces the cycle with a boolean tracking if there are any usages of the resource on the GPU within the current context that may prevent it from being mutated on the CPU. The fence of the context is simply attached to the buffer based off this which was allowed as the new behavior of buffer fences matches all the requirements for this.
An atomic transactional loop was performed on the backing `std::shared_ptr` inside `BufferView`/`TextureView`'s `lock`/`LockWithTag`/`try_lock` functions, these locks utilized `std::atomic_load` for atomically loading the value from the `shared_ptr` recursively till it was the same value pre/post-locking.
This commit abstracts the locking functionality of `TextureView`/`BufferDelegate` into `LockableSharedPtr` to avoid code duplication and removes the usage of `std::atomic_load` in either case as it is not necessary due to the implicit memory barrier provided by locking a mutex.
`PresentationEngine` and `GraphicBufferProducer` methods that utilized textures for the surface utilized the `Texture` type rather than the `TextureView` type, this was never correct but at the time of authoring this code `TextureView` was not finalized and in a major flux which is why it was not utilized and `Texture` was utilized instead. Now that is is far more stable, it has been replaced with `TextureView`.
We want to block on the host thread during presentation while the host surface isn't present to implicitly pause the game, this can end up being fairly costly as it involves locking the `PresentationEngine` mutex which can lead to a lot of contention with the presentation thread. This fixes the issue by polling if there is a surface and only if there isn't then doing the wait as it isn't mandatory to wait always, we'll eventually run into the guest thread stalling.
Newer versions of the Deko3D homebrew were crashing due to this check and it was discovered that the check was incorrect and rather than comparing the `NvSurface` what had to be compared was the `GraphicBuffer` associated with the slot directly.
Co-authored-by: lynxnb <niccolo.betto@gmail.com>
The copyright headers for external project such as yuzu/Ryujinx were inconsistent in ordering, Skyline should always be the first item in the list. In addition, they didn't always link to the project's GitHub which has also been fixed.
Multiple threads concurrently accessing the `TextureManager`/`BufferManager` (Referred to as "resource managers") has a potential deadlock with a resource being locked while acquiring the resource manager lock while the thread owning it tries to acquire a lock on the resource resulting in a deadlock.
This has been fixed with locking of resource manager now being externally handled which ensures it can be locked prior to locking any resources, `CommandExecutor` provides accessors for retrieving the resource manager which automatically handles locking aside doing so on attachment of resources.
GPU resources have been designed with locking by fences in mind, fences were treated as implicit locks on a GPU, design paradigms such as `GraphicsContext` simply unlocking the texture mutex after attaching it which would set the fence cycle were considered fine prior but are unoptimal as it enforces that a `FenceCycle` effectively ensures exclusivity. This conflates the function of a mutex which is mutual exclusion and that of the fence which is to track GPU-side completion and led to tying if it was acceptable to use a GPU resource to GPU completion rather than simply if it was not currently being used by the CPU which is the function of the mutex.
This rework fixes this with the groundwork that has been laid with previous commits, as `Context` semantics are utilized to move back to using mutexes for locking of resources and tracking the usage on the GPU in a cleaner way rather than arbitrary fence comparisons. This also leads to cleaning up a lot of methods that involved usage of fences that no longer require it and therefore can be entirely removed, further cleaning up the codebase. It also opens the door for future improvements such as the removal of `hostImmutableCycle` and replacing them with better solutions, the implementation of which is broken at the moment regardless.
While moving to `Context`-based locking the question of multiple GPU workloads being in-flight while using overlapping resources came up which brought a fundamental limitation of `FenceCycle` to light which was that only one resource could be concurrently attached to a cycle and it could not adequately represent multi-cycle dependencies. `FenceCycle` chaining was designed to fix this inadequacy and allows for several different GPU workloads to be in-flight concurrently while utilizing the same resources as long as they can ensure GPU-GPU synchronization.
If we want to allow submitting multiple pieces of work to the GPU at once while still requiring CPU synchronization, we'll need to track all past fence cycles associated with a resource alongside the current one. To solve this the concept of chaining fences has been introduced, fences from past usages can be chained to the latest fence which'll then recursively forward operations to chained fences.
This change also ends up mandating a move away from `FenceCycleDependency` as it would prevent fences from concurrently locking the same resources which is required for chaining to work as two fences being chained fundamentally means they're locking the same resources. The `AtomicForwardList` is therefore used as the new container.
An implementation of a singly-linked list with atomic access to allow for lock-free access semantics, it eliminates the requirement for a mutex which can introduce additional consideration for synchronization.
Resources on the GPU can be fairly convoluted and involve overlaps which can lead to the same GPU resources being utilized with different views, we previously utilized fences to lock resources to prevent concurrent access but this was overly harsh as it would block usage of resources till GPU completion of the commands associated with a resource.
Fences have now been replaced with locks but locks run into the issue of being per-view and therefore to add a common object for tracking usage the concept of "tags" was introduced to track a single context so locks can be skipped if they're from the same context. This is important to prevent a deadlock when locking a resource which has been already locked from the current context with a different view.
We do not want to allow saving of user data on unsigned builds as they don't have a stable signature and will not properly handle reinstallation. This can lead to a situation where the user has to resort to complex techniques to completely uninstall the package such as ADB or calling into PM directly.
We currently present all frames synchronously on the thread that calls into SurfaceFlinger functions, this is unoptimal as it doesn't match guest behavior which can lead to delaying the guest from working on the next frame. This commit queuing up frames to non-blocking and handles all waiting then presenting the frame on a dedicated thread.
We utilize `pthread_setname_np` to set the thread names but didn't check for any errors which resulted in the `Skyline-Choreographer` and `ChannelCmdFifo` not having proper names as they exceeded the 16 character limit on thread names for the pthread function. This has now been fixed by changing the names and introducing error checking to invocations of this function.
All our normal alignment functions are designed to only handle power of 2 (`POT`) multiples as we only align or check alignment to `POT` multiples but there are cases where this is not possible and we deal with `NPOT` multiples which is why this function is required.
We waited on the host GPU after `Execute` but this isn't optimal as it causes a major stall on the CPU which can lead to several adverse effects such as downclocking by the governor and losing the opportunity to work in parallel with the GPU.
This has now been fixed by splitting `Execute`'s functionality into two functions: `Submit` and `SubmitWithFlush` which both execute all nodes and submit the resulting command buffer to the GPU but flushing will wait on the GPU to complete while the non-flush variant will not wait and work ahead of the GPU.
We need move-assignment semantics to viably utilize these objects as class members, they cannot be replaced without move-assign (or copy-assign but that is undesirable here). This commit fixes that by introducing a move assignment operator to them while making the `slot` a pointer which has the necessary nullability semantics.
This change lets items get the updated position of their view holder in the adapter. Fixes an issue where the position of items was not updated after being removed from a `SelectableGenericAdapter`.
This preference launches `GpuDriverActivity` for managing custom gpu drivers. When the device has an incompatible GPU, the preference will be disabled and greyed out.
The activity adds the following functionalities:
* Lists installed drivers
* Allows the user to install new drivers, or remove installed ones
* Allows the user to select the driver that will be used by the emulator
At some point we will call Submit within draws or constant buffer updates, to avoid any infinite recursion mark draw/cbuf pending as false before performing any operation
The previous name was chosen as an afterthought and didn't clearly indicate what the purpose of the class is. We needed a separate, simple class without delegates members (like PreferenceSettings), so that its fields can be easily accessed via JNI to get settings values from native code.
The `Settings` class now has a pure virtual `Update` method, and uses inheritance over template specialization for platform-specific behavior override.
A `Setting` delegate class has been introduced, holding the raw value of the setting and adding support for registering callbacks to that setting. Callbacks will then be called when the value of that setting changes.
As a result of this, raw setting values have been made accessible through pointer dereference semantics.
SharedPreferences will be partially swapped out in the future to support per-game settings. In the meantime, make it clear from which class settings are coming from.
Settings are now shared to the native side by passing an instance of the Kotlin's `Settings` class. This way the C++ `Settings` class doesn't need to parse the SharedPreferences xml anymore.
Mali GPU drivers utilize the `ppoll()` syscall inside `waitForFences` which isn't correctly restarted after a signal, which we can receive at any time on a guest thread. This commit fixes that by recursively calling the function on failure till it succeeds or returns an unexpected error.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
Co-authored-by: Billy Laws <blaws05@gmail.com>
These applets are used by applications to display a custom error message to the user. Both the error message and the detailed error message are printed to the error log.
Co-authored-by: lynxnb <niccolo.betto@gmail.com>
This conforms to the C++ 'Allocator' named requirement allowing it to be used with any STL type and allows drastically reducing allocation times in cases which are suited for linear allocation.
Certain non-indexed quad draws would mistakenly take the indexed quad path because of the assumption that they would not have a bound index buffer. This resulted in a crash for most games using quads due to a faulty exception `Indexed quad conversion is not supported`, when in fact they were not using indexed quads.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
Co-authored-by: Billy Laws <blaws05@gmail.com>
This commit implements several key optimisations in megabuffering that are all inherently interlinked.
- Megabuffering is moved from per-buffer to per-view copies, this makes megabuffering possible for small views into larger underlying buffers which is often the case with even the simplest of games,
- Megabuffering is no longer the default option, it is only enabled for buffer views that have had inline GPU writes applied to them in the past as that is the only case where they are beneficial. In any other case the cost of copying, even with a 128KiB limit can be significant.
- With both of these changes, there is now possibility for overlapping views where one uses megabuffering and one does not. In order to allow GPU inline writes to work consistently in such cases a system of 'host immutability' has been implemented, when a buffer is marked as host immutable for a given cycle, all writes to the buffer from that point to the point the cycle is signalled will be performed on the GPU, ensuring that the backing contents are correctly sequenced
We don't always have access to CI secrets, such as, when a certain CI action is triggered by a PR from an external repository then it won't have access to secrets and be signed. While we likely will allow for this in the future as all workflows do have to be approved, it is still important to not crash when keys are unavailable and have a graceful fallback for those situations.
Has the same guarantees of pointer stabilty while also being significantly faster in cases where a buffer has thousands of views. This is the case in RE4 and this change leads to an almost 1000% performance improvement in that game.
Uses an API found through RE since none of the AOSP APIs work, additionaly the code for setting RR was consolidated to a single function that can be ran after all display updates.
We currently have a global `MegaBuffer` instance that is shared across all channels, this is very problematic as `MegaBuffer` fundamentally works like a state machine with allocations (especially resetting/freeing) and is thread-specific. Therefore, we now have a pool of several `MegaBuffer`s which is allocated from by the `CommandExecutor` and kept channel specific as a result which also limits its usage to a single thread, this allows for individually resetting or freeing any allocations.
There was a lot of redundant code in the `CommandScheduler` when the same functionality could be achieved with much shorter and cleaner code which this commit fixes. This includes no changes to the user-facing API and does not require any changes on the user side as a result.
Some games remap rendertargets or map them late which would lead to weird graphical bugs or crashes. Drop the caching since VMM lookup is fairly cheap anyway.
The `VkBufferImageCopy` offset calculations were wrong inside `CopyIntoStagingBuffer` as it multiplied the mip level's linear size by `levelCount` rather than `layerCount`. This led to substantial UB in games which called this function as it led to an overflow and resulted in writing to other areas of the buffer which caused major issues such as vertex/index buffer corruption and corresponding graphical glitches alongside likely being the cause of some crashes.
BC7 CPU decoding had the red and blue channels swapped around as it outputted a BGRA image after decoding while we expected an RGBA image to be produced. This should fix the colors of certain textures in titles such as Cuphead or Sonic Forces.
The syncpoint maximum value represents the maximum possible syncpt value at a given time, however due to PBs being submitted before max was incremented, for a brief moment of time this is not the case which could lead to crashes or other such behaviour if a game waits on the fence at the right moment.
We used a `FileProvider` for log sharing prior, this is no longer necessary since it comes under the `DocumentsProvider` now which can be utilized to share the log document directly.
Any documents with the same name existing in a directory that is copied to would cause an exception due to existing already, this fixes that by handling conflict resolution in those cases and automatically determining a file name that would avoid a conflict.
Previously a broken state value was returned from GetState that caused crashes in games using newer SDKs and NFP, correctly handle state now by updating it after initialisation.
We can't render to a 3D texture through a 3D view, we instead have to create a 2D array view into it and render to that. The texture manager previously didn't support having a different view type/layer count between a guest texture view and the underlying storage texture that is required to support this so that was also implemented by reading the view layer count from the dimensions depth instead if the underlying texture is 3D (and the view type is 2D array). Additionally move away from our own view type enum to Vulkan, inline with other guest texture member types.
Sampler anisotropy was made a required feature in an earlier commit due to its widespread availability but this was determined to be incorrect as certain Mali GPUs that can otherwise run 2D games in Skyline do not have this feature, while they are still not officially supported as this was the only roadblock to support them, it has now been made an optional feature.
`android:hasFragileUserData` was added in an earlier commit but then removed due to it not functioning because of signature checks. Now that signatures are consistent across builds, it has been readded and should now allow carrying data across CI and developer builds.
We've done no signing of any Skyline APKs to date which causes issues regarding authenticity of any APKs as they could be entirely unofficial builds which have not been vetted by the team. Additionally, the different keys remove the ability to reinstall a different build successively as Android checks for matching signatures before installing an APK.
With the Skyline document provider, easy access to the internal directory is required which may be hard to navigate to through the system file manager. This adds an option in settings to directly open up the directory in the system file manager.
The URIs (Document ID + Root) of the Skyline `DocumentsProvider` was unoptimal as it wasn't relative to a base directory. This is required for opening a root without knowledge of the full path in advance, it is therefore cleaner to provide a uniform `ROOT_ID` in a companion class.
On Android 12 and above, files from an application's external storage directory cannot be accessed by the user. The only proper SAF-compliant way to solve this is to create a `DocumentProvider` which proxies access to internal storage accordingly.
Certain GPU vendors such as ARM's Mali do not have support for BCn textures whatsoever while other vendors such as AMD only have partial support (BC1-BC3). Most titles on the guest utilize BC textures and to address this on host GPUs without support for BCn, we need to decompress the texture on the CPU. This commit implements a CPU BCn texture decoder based off Swiftshader's BC decoder, it also adds the necessary infrastructure to have different formats for the `GuestTexture` and `Texture` objects.
The iterations of the inner loop for sector deswizzling was miscalculated as `SectorWidth * SectorHeight` while the result was correct at `32`, it should be determined by the amount of sector lines within a GOB i.e.: `(GobWidth / SectorWidth) * GobHeight`.
Support for mipmapped textures was not implemented which is fairly crucial to proper rendering of games as the only level that would load is the first level (highest resolution), that might result in a lot more memory bandwidth being utilized. Mipmapping also has associated benefits regarding aliasing as it has a minor anti-aliasing effect on distant textures.
This commit entirely implements mipmapping support but it does not extend to full support for views into specific mipmap levels due to the texture manager implemention being incomplete.
Maxwell DMA requires swizzled copies to/from textures and earlier it had to construct an arbitrary `GuestTexture` to do so but with the introduction of the cleaner API, this has become redundant which this commit cleans up and replaces with direct calls to the API with all the necessary values.
The API for texture swizzling is now more concrete and abstracted out from `GuestTexture`, this allows for neater usage in certain areas such as MaxwellDMA while having a `GuestTexture` wrapper as well allowing for neater usage in those cases.
The code itself has also been cleaned up slightly with all usage of `u32`s being upgraded to `size_t` as this is simply more efficient due to the compiler not needing to emulate wraparound behavior for integer types smaller than the processor word size.
The Fermi 2D engine implements both image blit and resolve operations, supporting subpixel sampling with both linear and point filtering.
Resolve operations are performed by sampling from the center of each pixel in order to resolve the final image from the MSAA samples
MSAA images are stored in memory like regular images but each pixels dimensions are scaled: e.g for 2x2 MSAA
```
112233
112233
445566
445566
```
These would be sampled with both duDx and duDy as 2 (integer part), resolving to the following:
```
123
456
```
Blit operations are performed by sampling from the corner of each pixel, scaling the image as one would expect.
This implementation isn't fully complete as Vulkan blit doesn't support some combinations which Fermi does, most notably between colour and depth stencil. These will be implemented properly at a later date, likely after the texture manager rework.
Out of Bounds Blit, used by some OpenGL games is also missing since supporting it requires texture aliasing, this will also be supported after the texture manager rework.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Certain writes during swizzling went out of bounds due to incorrect `blockExtentY` calculation, the previous commit to fix this ended up breaking it further. This commit returns to the original commit's calculations with the proper addendum of a check for exact alignment with a GOB which is the case that was broken earlier.
The `GuestTexture::GetLayerStride` function was not always being utilized to retrieve the layer stride inside `Texture`, it would instead directly access the `guestTexture::layerStride` member. This is problematic as it may not be initialized and return `0` which would lead to a broken image copy.
Most engines have the capability to release a semaphore payload (or reduce in the case of GPFIFO) when a method is called or action is complete. Semaphores are used by games for both timing how long things take on GPU and waiting on resources so missing them can cause deadlocks or other related issues.
Textures can have more than one layer which we currently don't handle, all layers past the initial one will be filled with random data or 0s, leading to incorrect rendering. This has now been implemented now which fixes any titles which utilize array textures, such as "Super Mario Odyssey" or "Hatsune Miku: Project DIVA MegaMix".
The Maxwell3D RT layer count wasn't being set correctly as it has the same register as the depth values and is toggled between the two based on another register value.
The Maxwell GPU supports 3D textures which are tiled with the block-linear layout which didn't handle swizzling 3D textures correctly till now. This commit addresses that by implementing proper swizzling for 3D textures. Titles such as Cluster Truck and Super Mario Odyssey utilize 3D textures alongside a vast majority of other titles.
As per VMA docs: 'Allocation size returned in this variable may be greater than the size requested for the resource e.g. as VkBufferCreateInfo::size. Whole size of the allocation is accessible for operations on memory e.g. using a pointer after mapping with vmaMapMemory(), but operations on the resource e.g. using vkCmdCopyBuffer must be limited to the size of the resource.'
There were two issues here:
- If a skyline span was passed as a param then the 'T &object' version would be called, filling the span itself with random values rather than its contents
- Random numbers were repeated every call since independent_bits_engine copied generator state and thus it was never actually updated
This calculation for the amount of lines on the Y axis relative to the start of the last block was wrong and would instead determine the amount of lines to the last Y-axis GOB which wasn't accurate when padding was considered, this resulted in titles like Celeste having broken texture decoding (on a 1922x1082 texture) for the last ROB as most pixels would be masked out.
Certain titles such as BOTW trigger behavior to reuse an attachment within the same subpass, this caused an exception inside `RenderPassNode::AddAttachment` as it cannot find corresponding subpass for attachment. To fix this issue, we now assume that when it cannot find a subpass for an existing attachment, it is attached to the latest subpass and return the attachment.
Certain textures may be unaligned with a GOB's height of 8 lines, we already handle the case of being unaligned with a GOB's width of 64-bytes. This case occurs on titles such as SMO when going in-game.
The function now returns from a segmentation fault when a debugger is present, this allows the entire context to be intact which can allow the debugger to correctly pick up variables from all stack frames while it could not extrapolate most variables when trapped inside the signal handler without the values of all registers.
In the Maxwell 3D engine, instanced draws are implemented by repeating the exact same draw in sequence with special flag set in vertexBeginGl. This flag allows either incrementing the instance counter or resetting it, since we need to supply an instance count to the host API we defer all draws until state changes occur. If there are no state changes between draws we can skip them and count the occurences to get the number of instances to draw.
Implements register state that corresponds to the size of a single point sprite in Maxwell 3D, this is emitted by the shader compiler in the preamble but needs to be only applied if the input topology is a point primitive and it is invalid to set the point size in any other case.
Earlier texture locking design required the lock to be retained but since the introduction of `AttachTexture`, this no longer needs to be done. This being done caused deadlocks when the depth texture is sampled by the fragment shader while being bound as an RT since it would attempt to lock the texture again.
A basic `bcat:u` implementation to prevent titles such as "Kirby and the Forgotten Land" dependent on BCAT support from crashing due to the lack of an implementation.
This is a widely supported feature that games may require conditionally but due to it being supported on effectively all target devices, it was made mandatory. This is used by titles such as ARMS.
Improves the readability of the log and replaces the previously uninformative prefix of `operator()` due to being in a lambda with `Controller support`.
Maxwell3D has a register for linking the TIC/TSC index in bindless texture handles, this is used by games to implement bindless combined texture-sampler handles.
Implements `GraphicsEnvironment::ReadCbufValue` & `GraphicsEnvironment::ReadTextureType` with a framework of heterogeneous lookups for caching and callbacks for querying constant buffer or TIC values with validation checks for successive draws to ensure unique IR is generated.
The `descriptorSetWrites` being filled is now optional and the case of it being empty is handled correctly, this is done by certain titles such as ARMS and is entirely valid behavior. It should be noted that not doing this leads to errors in the guest due to invalid GPU state while working on the host GPU.
SVC `SignalToAddress` had a bug with the behavior of `SignalAndModifyBasedOnWaitingThreadCountIfEqual` which was entirely incorrect and led to deadlocks in titles such as ARMS that were dependent on it. This commit corrects the behavior and refactors both SVCs and moves their arbitration/waiting to inside the corresponding `KProcess` function rather than the SVC to avoid redundancies and improve code readability.
Filtering of validation logs is now extended beyond BCn formats and now covers other format which have their feature set misreported by the driver, this significantly drives down the amount of logs depending on the title.
Implements an algorithm to determine formats that can be aliased as views without needing `VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT`, this avoids spamming warning logs on view creation when the aliased formats will function in practice.
There was an oversight with exclusive subpasses which could lead to RPs with more than one subpass could be created even though one pass was exclusive, this oversight was not finishing the render pass at the end of `AddSubpass`. This could lead to a future subpass adding to the end of that RP even though it was intended to exclusively have a single subpass.
This case occurs in titles such as Celeste (in-game) and breaks rendering on GPUs that may require exclusive subpasses for proper functionality.
The Khronos Validation Layer can often generate warning/error logs due to our intentional breakage from Vulkan specification, these can occur several times a frame resulting in the logs being spammed and making it difficult to extract useful information out of logs. The scope of these logs has now been reduced with more general filtering and the introduction of specialized filtering to handle complex cases such as BCn hacks with `libadrenotools` on Adreno devices.
Descriptor set updates were broken on the non-push-descriptor path due to lifetime issues with VkDescriptorSetLayout's usage during the execution phase which entirely broke rendering on AMD/Mali GPUs due to them not supporting `VK_KHR_push_descriptor`.
This commit addresses that by moving the allocation of a descriptor set to outside the lambda and into the recording phase, it also simplifies the semantics and resources passed into the lambda by removing redundancies.
The Vulkan render pass cache was fundamentally broken since it was designed around the Render Pass Compatibility clause due to being designed for framebuffer compatibility initially. As this scope was extended to a general render pass cache, the amount of data in the key was not extended to include everything it should have. This commit introduces the missing pieces in the RP cache and simplifies the underlying code in the process.
The backing for shader data would implicitly be zero-initialized due to a `resize` on every shader parse, this was entirely unnecessary as we would overwrite the entire range regardless.
We avoid this by using statically allocated storage and a span over it containing the shader bytecode which avoids any unnecessary clear semantics without resorting to more complex solutions such as a custom allocator.
Implements a cache for storing `VkFramebuffer` objects with a special path on devices with `VK_KHR_imageless_framebuffer` to allow for more cache hits due to an abstract image rather than a specific one.
Caching framebuffers is a fairly crucial optimization due to the cost of creating framebuffers on TBDRs since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding framebuffer memory.
There are a lot of cases of `VkImageView` being recreated arbitrarily due to it being tied to the ephemeral object `TextureView` rather than `Texture`, this commit flips that by storing all `VkImageView`s inside `Texture` with `TextureView` simply holding a copy of the handle to them. Additionally, this change results in stable `VkImageView` handles and helps in paving the path for framebuffer caching when `VK_KHR_imageless_framebuffer` is unavailable.
As we desire more accurate profiling data in certain circumstances, making the app explicitly profilable will allow for this, it will also remove the (annoying) prompt to do this in the Android Studio profiler.
Implements a cache for storing `VkRenderPass` objects which are often reused, they are not extremely expensive to create generally but this is a required step to build up to a framebuffer cache which is an extremely expensive object to create on TBDRs generally since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding memory.
We run into a lot of successive subpasses with the exact same framebuffer configuration which we now exploit to avoid the creation of a new subpass due to the overhead involved with this. This provides significant performance boosts in certain cases due to the magnitude of difference in the amount of subpasses being created while providing next to no benefit in other cases.
The check for the fence cycle being the same as the current cycle was incorrectly inverted to be the opposite of what it should have been, leading to bugs.
The responsibility for synchronizing a texture and locking it is now on the `PresentationEngine` rather than the API-user as this'll allow more fine grained locking and delay waiting until necessary.
As we require a relaxed version of the Vulkan render pass compatibility clause for caching multi-subpass render passes, we now utilize a quirk to determine if this is supported which it is on Nvidia/Adreno while AMD/Mali where it isn't supported we force single-subpass render passes.
We found out that certain vendors such as Nvidia had a limitation on the global priority of a queue and requesting `VK_QUEUE_GLOBAL_PRIORITY_HIGH_EXT` would result in `VK_ERROR_NOT_PERMITTED_EXT`. A quirk has been introduced to supply the maximum supported global priority which is currently set on a per-vendor basis to avoid future crashes.
Implements a cache for storing `VkPipeline` objects which are fairly expensive to create and doing so on a per-frame basis was rather wasteful and consumed a significant part of frametime. It should be noted that this is **not** compliant with the Vulkan specification and **will** break unless the driver supports a relaxed version of the Vulkan specification's Render Pass Compatibility clause.
We can use inline push descriptors for writing to descriptor rather than allocating a descriptor set for a one time write and freeing it as this is rather inefficient while an inline push descriptor generally ends up being a direct `memcpy` on the driver side designed for this use-case.
We want Skyline to have the most favorable GPU scheduling possible due to low latency and high throughput requirements, we request high priority scheduling due to this reason.
This implements all Maxwell3D registers and HLE Vulkan state for Tessellation including invalidation of the TCS (Tessellation Control Shader) state during state changes.
Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer.
We had earlier tried to fix this by using vkCmdUpdateBuffer however this caused significant performance loss due to an oversight in Adreno drivers. We could have worked around this simply by using vkCmdCopy buffer however there would still be a performance loss due to renderpasses being split up with copies inbetween.
To avoid this we introduce 'megabuffers', a brand new technique not done before in any other switch emulators. Rather than replaying the copies in sequence on the GPU, we take advantage of the fact that buffers are generally small in order to replay buffers on the GPU instead. Each write and subsequent usage of a buffer will cause a copy of the buffer with that write, and all prior applied to be pushed into the megabuffer, this way at the start of execute the megabuffer will hold all used states of the buffer simultaneously. Draws then reference these individual states in sequence to allow everything to work without any copies. In order to support this buffers have been moved to an immediate sync model, with synchronisation being done at usage-time rather than execute (in order to keep contents properly sequenced) and GPU-side writes now need to be explictly marked (since they prevent megabuffering). It should also be noted that a fallback path using cmdCopyBuffer exists for the cases where buffers are too large or GPU dirty.
As bindings weren't correctly handled due to the fact that `EmitSPIRV` would change the bindings, the shader module cache would not correctly function and have no cache hits in `find` and rather have them in `try_emplace` which negated any performance benefit of it. This has now been fixed by retaining the initial cache key for insertion into the cache while also storing the post-emit bindings and restoring them during a cache hit.
Implements caching of the compiled shader module (`VkShaderModule`) in an associative map based on the supplied IR, bindings and runtime state to avoid constant recompilation of shaders. This doesn't entirely address shader compilation as an issue since host shader compilation is tied to Vulkan pipeline objects rather than Vulkan shader modules, they need to be cached to prevent costly host shader recompilation.
This implements the first step of a full shader cache with caching any IR by treating the shared pointer as a handle and key for an associative map alongside hashing the Maxwell shader bytecode, it supports both single shader program and dual vertex program caching.
We desire the ability to hash and check equality of data across spans to use associative containers such as `std::unordered_map` with spans. The implemented functions provide an easy way to do that.
Mostly based off of yuzu's implementation, this will need to be extended in the future to open up a UI for configuring controllers according to the applications requirements.
As there was no check for the lack of a `GuestTexture`/`GuestBuffer`, it would lead to UB when a texture/buffer that had no guest such as the `zeroTexture` from `GraphicsContext` would be marked as dirty they would cause a call to `NCE::RetrapRegions` with a `nullptr` handle that would be dereferenced and cause a segmentation fault.
In certain situations such as constant buffer updates, we desire to use the guest buffer as a shadow buffer forwarding all writes directly to it while we update the host using inline buffer updates so they happen in-sequence. This requires special behavior as we cannot let any synchronization operations take place as they would break the shadow buffer, as a result, an external synchronization flag has been added to prevent this from happening.
It should be noted that this flag is not respected for buffer recreation which will lead to UB, this can and will break updates in certain cases and this change isn't complete without buffer manager support.
The offset of the view wasn't added to the `vkCmdUpdateBuffer`, this would cause the offset to be incorrect given the buffer was a view of a larger buffer that wasn't the start of it. This commit fixes that by adding the offset of the view to the buffer update.
We didn't call `MarkGpuDirty` on textures/buffers prior to GPU usage, this would cause them to not be R/W protected when they should be and provide outdated copies if there were any read accesses from the CPU (which are not possible at the moment since we assume all accesses are writes at the moment). This has now been fixed by calling it after synchronizing the resource.
The terminology "Non-Graphics pass" was deemed to be fairly inaccurate since it simply covered all Vulkan commands (not "passes") outside the render-pass scope, these may be graphical operations such as blits and therefore it is more accurate to use the new terminology of "Outside-RenderPass command" due to the lack of such an implication while being consistent with the Vulkan specification.
Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer. Fix this by updating cbufs on the GPU/CPU seperately, only ever syncing them back at the start or after a guest side CPU write, at the moment only a single word is updated at a time however this can be optimised in the future to batch all consecutive updates into one large one.
We require certain buffers to only be on the host while being accessible through the same abstractions as a guest buffer as they must be interchangeable in usage.
We needed to block stack frame lookups past JNI code as Java doesn't follow the ARMv8 frame pointer ABI which leads to invalid pointer dereferences. Any JNI function that throws or handles exceptions must do this now or it may lead to a `SIGSEGV`.
Some games may pass empty TICs as inputs to shaders while not actually using them within the shader. Create an empty texture and pass this in instead when we hit this case, the nullDescriptor feature could be used but it's not supported by all devices so we chose to do it this way instead.
Skyline's `exception` class now stores a list of all stack frames during the invocation of the exception. These can later be parsed by the exception handler to generate a human-readable stack trace. To assist with more complete stack traces, `-fno-omit-frame-pointer` is now passed on debug builds which forces the inclusion of frames on function calls.
NCE is implicitly depended on by the `GPU` class due to the NCE Memory Trapping API so the destruction of it must take place after the destruction of the `GPU` class. Additionally, to prevent bugs the NCE destructor must set `staticNce` to `nullptr` as the signal handler will potentially access a destroyed instance of NCE otherwise.
Without this sRGB textures would be interpreted as RGB leading to colours being slighly off. The sRGB flag isn't stored as part of format word so we reuse the _pad_ field of it to store the flag for the switch case.
We don't want to actually exit the process as it'll automatically be restarted gracefully due to a timeout after being unable to exit within a fixed duration so we just want to infinite sleep during termination. This should fix issues where exiting any game would cause the app to force close after some time as exception signal handling would fail in the background, the app should stay open now and automatically restart itself when another game is loaded in.
A lot of logs are incomplete due to being unable to flush inside the signal handler, now we flush after any exceptions so that there is a guarantee of any exceptions being logged as this is crucial for proper debugging.
B5G6R5 isn't generally supported by the swapchain and the format is used for R5G6B5 with swapped R/B channels to avoid aliasing so we reverse that by using R5G6B5 as the underlying Vulkan format for the swapchain which should be automatically handled by the driver for any copies from B5G6R5 textures and the data representation should be the same as B5G6R5 with swapped R/B channels so not reporting the correct texture::Format should be fine.
The DMA engine is used to perform DMA buffer/texture copies directly on the GPU. It can deswizzle arbritary regions of input textures, perform component remapping and swizzle into output textures.
This impl only supports 1D buffer copies, 2D ones will come later.
