Previously the movie was started *after* core starts running, causing potential indeterminism.
Some desyncs are still not fixed; they may be caused by core timing. More investigation is required.
Since we do not have an overlay yet, it can be confusing whether movie is being recorded or played. This makes it clear.
Status messages (e.g. system archive missing) will be overriden, but that shouldn't be too important when recording movies.
Doubled the status bar updating frequency to provide a better experience. It now updates every second.
This is completely rebuilt, in order to allow setting author, displaying movie metadata, and toggling read-only mode.
The UX is changed to more closely match other emulators' behaviour. Now you can only record/play from start/reset (In the future, we might want to introduce 'record from savestate')
Also fixed a critical bug where movie file can be corrupted when ending the recording while game is still running.
Instead of specifying it when starting playback. This is necessary as
you can end up playing the movie even if you started as Recording
(for example, loading a state in R/O mode will switch to Playing mode)
Most other emulators handle this automatically in the frontend,
booting/restarting the corresponding game instead of reporting an error.
Therefore, remove these checks and errors from the module.
These fields are included in most emulators and required by TASVideos.
`input_count` is implemented by counting the number of 'PadAndCircle' states, as this is always polled regularly and can act as a time/length indicator.
TASVideos also require the input count/frame count to be verified by the emulator before playback, which is also implemented in this commit.
The read-only mode switch affects how movies interact with savestates after you start a movie playback and load a savestate. When you are in read-only mode, the movie will resume playing from the loaded savestate. When you are in read+write mode however, your input will be recorded over the original movie ('rerecording'). If you wish to start rerecording immediately, you should switch to R+W mode, save a state and then load it.
To make this more user-friendly, I also added a unique ID to the movies, which allows each movie to have an individual set of savestate slots (plus another set for when not doing any movies). This is as recommended by staff at TASVideos.
Allocating new textures has fairly high driver overhead.
We can avoid some of this by reusing the textures from destroyed surfaces since the game will probably create more textures with the same dimensions and format.
Some games (e.g. Pilotwings Resort) create many surfaces that are invalidated quickly but were never removed.
This occasionally lead to large lag spikes due to high lookup times and other data structure management overhead.
Given this is a central class, we should flag cases where the return
value of some functions not being used is likely a bug.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
setMargin() has been deprecated since Qt 5, and replaced with
setContentsMargins(). We can move over to setContentsMargins() to stay
forward-compatible with Qt 6.0.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
I made a request on the Xbyak issue tracker to allow some constructors
to be constexpr in order to avoid static constructors from needing to
execute for some of our register constants.
This request was implemented, so this updates Xbyak so that we can make
use of it.
Previously core itself was the library containing the code to gather
common information (build info, CPU info, and OS info), however all of
this isn't core-dependent and can be moved to the common code and use
the common interfaces. We can then just call those functions from the
core instead.
This will allow replacing our CPU detection with Xbyak's which has
better detection facilities than ours. It also keeps more
architecture-dependent code in common instead of core.
Saves UISettings and Settings when booting a guest. Moves updating
UISettings::values from GMainWindow::closeEvent into its own function,
then reuses it in GMainWindow::BootGame.
Co-Authored-By: lat9nq <22451773+lat9nq@users.noreply.github.com>
* Look at direction of analog axis travel instead of instantaneous sample
* Clang-format
* Use map count, use unordered_map
* Improve digital vs. true analog axis heuristics
* Implement the basics of controller auto mapping. From testing doesn't currenlty work.
Opening the controller requires the device index, but it is only known and guaranteed
at boot time or when a controller is connected.
* Use the SDL_INIT_GAMECONTROLLER flag to initialize the controller
subsystem. It automatically initializes the joystick subsystem too,
so SDL_INIT_JOYSTICK is not needed.
* Implement the SDLGameController class to handle open game controllers.
Based on the SDLJoystick implementation.
* Address review comments
* Changes SDLJoystick and SDLGameController to use a custom default
constructible destructor, to improve readability. The only deleters
used previously were SDL_JoystickClose and SDL_GameControllerClose,
respectively, plus null lambdas. Given that both SDL functions
accept null pointers with just an early return, this should be
functionally the same.
with just an early return
* warn the user when a controller mapping is not found
* Get axis direction and threshold from SDL_ExtendedGameControllerBind
* Reject analog bind if it's not axis, for the couple of examples present in SDL2.0.10's db.
Also add SDL_CONTROLLER_BINDTYPE_NONE for the button bind switch, with a better log message.
* sdl_impl.cpp: Log the error returned by SDL_GetError upon failure to open joystick
* sdl: only use extended binding on SDL2.0.6 and up
* sdl_impl.cpp: minor changes
Follows the video core PR. fmt doesn't require casts for enum classes
anymore, so we can remove quite a few casts.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
fmt now automatically prints the numeric value of an enum class member by default, so we don't need to use casts any more.
Reduces the line noise in our code a bit.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Conversions from void* to the proper data type are well-defined and
supported by static_cast. We don't need to use reinterpret_cast here.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
* game_list: Eliminate redundant argument copies
Several functions can be taken by const reference to avoid copies
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
* game_list: Make game list function naming consistent
Makes the naming consistent with the rest of the functions that are
present.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: Lioncash <mathew1800@gmail.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
The current inconsistency can result in a developer unintentionally
creating a crash when using UNIMPLEMENTED_MSG, if they're only
familiar with UNIMPLEMENTED. The two macros shouldn't have such
wildly different behaviors.
The feature wasn't working when the "single window mode" was off.
Changed the cursor setting to only affect the render_window and
moved to a signal/slot model to show the mouse.
* service/apt: Add GetModule and GetAppletManager
These will be used to retrieve and set deliver args across system resets (which are currently implemented as complete restarts)
* applet_manager: Implement DeliverArg
`flags` was added to `ApplicationJumpParameters` as flags 0x2 is handled differently from 0x0.
* service/apt: Add ReceiveDeliverArg, implement GetStartupArgument
Some based on guesses.
* Address review comments
* kernel/thread: Change owner_process to std::weak_ptr
Previously this leaked almost all kernel objects. In short, Threads own Processes which own HandleTables which own maps of Objects which include Threads.
Changing this to weak_ptr at least got the camera interfaces to destruct properly. Did not really check the other objects though, and I think there are probably more leaks.
* hle/kernel: Lock certain objects while deserializing
When deserializing other kernel objects, these objects (`MemoryRegion`s and `VMManager`s) can possibly get modified. To avoid inconsistent state caused by destructor side-effects, we may as well simply lock them until loading is fully completed.
* Fix silly typo
Somehow this didn't break?!
* Enable 'Accurate Multiplication' by default.
* Move 'Disk Shader Cache' to the 'Advanced' tab
* Prevent enabling 'Disk Shader Cache' when 'Enable Hardware Shader' or 'Accurate Multiplication' is disabled.
* Do not load 'Disk Shader Cache' when 'Accurate Multiplication' is disabled.
* Add a tooltip for 'Disk Shader Cache'.
Allows some implementations to avoid completely zeroing out the internal
buffer of the optional, and instead only set the validity byte within
the structure.
This also makes it consistent how we return empty optionals.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
* Forward declare ui and use unique_ptr
* ConfigureEnhancements: use unique_ptr for ui
* Use make_unique instead of new where applicable
* Move some of the ui includes that already used unique_ptr
* main.cpp: also make use of make_unique on Config
* Address review comments
The deep recursion has caused issues in certain games with large numbers of files, especially with MSVC builds.
Previously the recursion depth is about equal to the number of files present. With this the depth should be about equal to the maximum depth of the directory structure of the RomFS.
Consistency change with how we mark constants in the rest of the
codebase.
Co-Authored-By: LC <712067+lioncash@users.noreply.github.com>
Co-authored-by: LC <712067+lioncash@users.noreply.github.com>
The list of points is returned by const reference, so we don't need to
make a copy of every element in the list.
Co-authored-by: Lioncash <mathew1800@gmail.com>
- In `SetCurrentThreadName`, when on Linux, truncate to 15 bytes, as (at
least on glibc) `pthread_set_name_np` will otherwise return `ERANGE` and
do nothing.
- Also, add logging in case `pthread_set_name_np` returns an error
anyway. This is Linux-specific, as the Apple and BSD versions of
`pthread_set_name_np return `void`.
- Change the name for CPU threads in multi-core mode from
"yuzu:CoreCPUThread_N" (19 bytes) to "yuzu:CPUCore_N" (14 bytes) so it
fits into the Linux limit. Some other thread names are also cut off,
but I didn't bother addressing them as you can guess them from the
truncated versions. For a CPU thread, truncation means you can't see
which core it is!
The general pattern is to mark mutexes as mutable when it comes to
matters of constness, given the mutex acts as a transient member of a
data structure.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
These are intentionally discarded internally, since the rest of the
public API allows querying success. We want all non-internal uses of
these functions to be explicitly checked, so we can signify that we
intentionally want to discard the return values here.
