mirror of https://github.com/sanni/cartreader.git synced 2024-11-26 06:24:14 +01:00

Table of Contents

8bit Flash adapter (for HW3):
Mod needed for HW5:
Pinouts of the TL866 adapter pcbs for reference:
SNES Maskrom Flash adapter (for HW3):
Mod needed for HW5:

The OSCR can also program single flashroms. Supported are the same flashroms as with SNES repros since the "Flashrom Programmer" and SNES "Flash repro" menus share the same code in flash.ino.

8bit Flash adapter (for HW3):

Parts:

PCB(flash_adapter.zip, 1.2mm thickness)
TL866 SOP44 adapter
TL866 TSOP48 adapter
2x40 pinheaders
2x SMD slide switch (LCSC Part Number C128955)

Mod needed for HW5:

Currently there is no flash adapter PCB for HW5 but you can modify the HW3 flash adapter.

cut the trace going to SNES CPU Clock and rewire Flashrom OE to SNES CS
cut the trace going to SNES IRQ and rewire Flashrom WE to SNES WR

The modified flash adapter will still work with HW3.

Pinouts of the TL866 adapter pcbs for reference:

AM29F032 TSOP40:

MX29LV320 TSOP48:

MX29L3211 SOP44:

MX29LV160 SOP44:

SNES Maskrom Flash adapter (for HW3):

This adapter allows you to flash 29F016/29F032/29F033 flashroms soldered to SNES adapter PCBs.

Parts:

SNES maskrom flash adapter PCB(flash_adapter.zip, 1.2mm thickness)
TSOP to DIP adapter PCB(TSOP_to_DIP_adapter.zip)
single row female pin headers (buy 1x40 and cut to size)
2 SMD slide switch (LCSC Part Number C128955)

Mod needed for HW5:

Currently there is no flash adapter PCB for HW5 but you can modify the HW3 flash adapter.

cut the trace going to SNES CPU Clock and rewire Flashrom OE to SNES CS
cut the trace going to SNES IRQ and rewire Flashrom WE to SNES WR

The modified flash adapter will still work with HW3.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.