As per VMA docs: 'Allocation size returned in this variable may be greater than the size requested for the resource e.g. as VkBufferCreateInfo::size. Whole size of the allocation is accessible for operations on memory e.g. using a pointer after mapping with vmaMapMemory(), but operations on the resource e.g. using vkCmdCopyBuffer must be limited to the size of the resource.'
There were two issues here:
- If a skyline span was passed as a param then the 'T &object' version would be called, filling the span itself with random values rather than its contents
- Random numbers were repeated every call since independent_bits_engine copied generator state and thus it was never actually updated
This calculation for the amount of lines on the Y axis relative to the start of the last block was wrong and would instead determine the amount of lines to the last Y-axis GOB which wasn't accurate when padding was considered, this resulted in titles like Celeste having broken texture decoding (on a 1922x1082 texture) for the last ROB as most pixels would be masked out.
Certain titles such as BOTW trigger behavior to reuse an attachment within the same subpass, this caused an exception inside `RenderPassNode::AddAttachment` as it cannot find corresponding subpass for attachment. To fix this issue, we now assume that when it cannot find a subpass for an existing attachment, it is attached to the latest subpass and return the attachment.
Certain textures may be unaligned with a GOB's height of 8 lines, we already handle the case of being unaligned with a GOB's width of 64-bytes. This case occurs on titles such as SMO when going in-game.
The function now returns from a segmentation fault when a debugger is present, this allows the entire context to be intact which can allow the debugger to correctly pick up variables from all stack frames while it could not extrapolate most variables when trapped inside the signal handler without the values of all registers.
In the Maxwell 3D engine, instanced draws are implemented by repeating the exact same draw in sequence with special flag set in vertexBeginGl. This flag allows either incrementing the instance counter or resetting it, since we need to supply an instance count to the host API we defer all draws until state changes occur. If there are no state changes between draws we can skip them and count the occurences to get the number of instances to draw.
Implements register state that corresponds to the size of a single point sprite in Maxwell 3D, this is emitted by the shader compiler in the preamble but needs to be only applied if the input topology is a point primitive and it is invalid to set the point size in any other case.
Earlier texture locking design required the lock to be retained but since the introduction of `AttachTexture`, this no longer needs to be done. This being done caused deadlocks when the depth texture is sampled by the fragment shader while being bound as an RT since it would attempt to lock the texture again.
A basic `bcat:u` implementation to prevent titles such as "Kirby and the Forgotten Land" dependent on BCAT support from crashing due to the lack of an implementation.
This is a widely supported feature that games may require conditionally but due to it being supported on effectively all target devices, it was made mandatory. This is used by titles such as ARMS.
Improves the readability of the log and replaces the previously uninformative prefix of `operator()` due to being in a lambda with `Controller support`.
Maxwell3D has a register for linking the TIC/TSC index in bindless texture handles, this is used by games to implement bindless combined texture-sampler handles.
Implements `GraphicsEnvironment::ReadCbufValue` & `GraphicsEnvironment::ReadTextureType` with a framework of heterogeneous lookups for caching and callbacks for querying constant buffer or TIC values with validation checks for successive draws to ensure unique IR is generated.
The `descriptorSetWrites` being filled is now optional and the case of it being empty is handled correctly, this is done by certain titles such as ARMS and is entirely valid behavior. It should be noted that not doing this leads to errors in the guest due to invalid GPU state while working on the host GPU.
SVC `SignalToAddress` had a bug with the behavior of `SignalAndModifyBasedOnWaitingThreadCountIfEqual` which was entirely incorrect and led to deadlocks in titles such as ARMS that were dependent on it. This commit corrects the behavior and refactors both SVCs and moves their arbitration/waiting to inside the corresponding `KProcess` function rather than the SVC to avoid redundancies and improve code readability.
Filtering of validation logs is now extended beyond BCn formats and now covers other format which have their feature set misreported by the driver, this significantly drives down the amount of logs depending on the title.
Implements an algorithm to determine formats that can be aliased as views without needing `VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT`, this avoids spamming warning logs on view creation when the aliased formats will function in practice.
There was an oversight with exclusive subpasses which could lead to RPs with more than one subpass could be created even though one pass was exclusive, this oversight was not finishing the render pass at the end of `AddSubpass`. This could lead to a future subpass adding to the end of that RP even though it was intended to exclusively have a single subpass.
This case occurs in titles such as Celeste (in-game) and breaks rendering on GPUs that may require exclusive subpasses for proper functionality.
The Khronos Validation Layer can often generate warning/error logs due to our intentional breakage from Vulkan specification, these can occur several times a frame resulting in the logs being spammed and making it difficult to extract useful information out of logs. The scope of these logs has now been reduced with more general filtering and the introduction of specialized filtering to handle complex cases such as BCn hacks with `libadrenotools` on Adreno devices.
Descriptor set updates were broken on the non-push-descriptor path due to lifetime issues with VkDescriptorSetLayout's usage during the execution phase which entirely broke rendering on AMD/Mali GPUs due to them not supporting `VK_KHR_push_descriptor`.
This commit addresses that by moving the allocation of a descriptor set to outside the lambda and into the recording phase, it also simplifies the semantics and resources passed into the lambda by removing redundancies.
The Vulkan render pass cache was fundamentally broken since it was designed around the Render Pass Compatibility clause due to being designed for framebuffer compatibility initially. As this scope was extended to a general render pass cache, the amount of data in the key was not extended to include everything it should have. This commit introduces the missing pieces in the RP cache and simplifies the underlying code in the process.
The backing for shader data would implicitly be zero-initialized due to a `resize` on every shader parse, this was entirely unnecessary as we would overwrite the entire range regardless.
We avoid this by using statically allocated storage and a span over it containing the shader bytecode which avoids any unnecessary clear semantics without resorting to more complex solutions such as a custom allocator.
Implements a cache for storing `VkFramebuffer` objects with a special path on devices with `VK_KHR_imageless_framebuffer` to allow for more cache hits due to an abstract image rather than a specific one.
Caching framebuffers is a fairly crucial optimization due to the cost of creating framebuffers on TBDRs since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding framebuffer memory.
There are a lot of cases of `VkImageView` being recreated arbitrarily due to it being tied to the ephemeral object `TextureView` rather than `Texture`, this commit flips that by storing all `VkImageView`s inside `Texture` with `TextureView` simply holding a copy of the handle to them. Additionally, this change results in stable `VkImageView` handles and helps in paving the path for framebuffer caching when `VK_KHR_imageless_framebuffer` is unavailable.
As we desire more accurate profiling data in certain circumstances, making the app explicitly profilable will allow for this, it will also remove the (annoying) prompt to do this in the Android Studio profiler.
Implements a cache for storing `VkRenderPass` objects which are often reused, they are not extremely expensive to create generally but this is a required step to build up to a framebuffer cache which is an extremely expensive object to create on TBDRs generally since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding memory.
We run into a lot of successive subpasses with the exact same framebuffer configuration which we now exploit to avoid the creation of a new subpass due to the overhead involved with this. This provides significant performance boosts in certain cases due to the magnitude of difference in the amount of subpasses being created while providing next to no benefit in other cases.
The check for the fence cycle being the same as the current cycle was incorrectly inverted to be the opposite of what it should have been, leading to bugs.
The responsibility for synchronizing a texture and locking it is now on the `PresentationEngine` rather than the API-user as this'll allow more fine grained locking and delay waiting until necessary.
As we require a relaxed version of the Vulkan render pass compatibility clause for caching multi-subpass render passes, we now utilize a quirk to determine if this is supported which it is on Nvidia/Adreno while AMD/Mali where it isn't supported we force single-subpass render passes.
We found out that certain vendors such as Nvidia had a limitation on the global priority of a queue and requesting `VK_QUEUE_GLOBAL_PRIORITY_HIGH_EXT` would result in `VK_ERROR_NOT_PERMITTED_EXT`. A quirk has been introduced to supply the maximum supported global priority which is currently set on a per-vendor basis to avoid future crashes.
Implements a cache for storing `VkPipeline` objects which are fairly expensive to create and doing so on a per-frame basis was rather wasteful and consumed a significant part of frametime. It should be noted that this is **not** compliant with the Vulkan specification and **will** break unless the driver supports a relaxed version of the Vulkan specification's Render Pass Compatibility clause.
