The Skyline logo was added to the title area but it ended up being too distracting with a light theme as the logo was designed purely for a white background. Ultimately, even though it looked good with the dark theme we had to remove it.
Aligning the buttons to the bottom of the game image was determined to look odd due to the amount of padding between the title and buttons. They are now back to being below the title but the buttons have been resized with "Play" being a wide button while "Pin" has been replaced with Google Material Icons's "Add To Home Screen" icon and sized down to an icon-only button.
- Logo is now displayed next to the app name
- Remove search bar animation
- New color accent
- Improve visibility of controller binding setting's glyphs
This pushes a set of command buffers into the Host1x command FIFO allocated for the channel, returning fence thresholds that can be waited on for completion,
The Host1x block of the TX1 supports 14 separate channels to which commands can be issued, these all run asynchronously so are emulated the same way as GPU channels with one FIFO emulation thread each. The command FIFO itself is very similar to the GPFIFO found in the GPU however there are some differences, mainly the introduction of classes (similar to engines) and the Mask opcode (which allows writing to a specific set of offsets much more efficiently).
There is an internal Host1x class which functions similar to the GPFIFO class in the GPU, handling general operations such as syncpoint waits, this is accessed via the simple method interface. Other channels such as NVDEC and VIC are behind the 'Tegra Host Interface' (THI) in HW, this abstracts out the classes internal details and provides a uniform method interface ontop of the Host1x method one. We emulate the THI as a templated wrapper for the underlying class.
Syncpoint increments in Host1x are different to GPU, the THI allows submitting increment requests that will be queued up and only be applied after a specific condition in the associated engine is met; however the option to for immediate increments is also available.
This avoids the excessive repetition needed for the case where array
members have no default constructor.
eg:
```c++
std::array<Type, 10> channels{util::MakeFilledArray<Type, 10>(typeConstructorArg, <...>)};
```
nvmap allows mapping handles into the SMMU address space through 'pins'. These are refcounted mappings that are lazily freed when required due to AS space running out. Nvidia implements this by using several MRU lists of handles in order to choose which ones to free and which ones to keep, however as we are unlikely to even run into the case of not having enough address space a naive queue approach works fine. This pin infrastructure is used by nvdrv's host1x channel implementation in order to handle mapping of both command and data buffers for submit.
host1x channels are generally similar to GPU channels however there is only one channel for each specific class (like a GPU engine) and an address space is shared between them all.
This PR implements the simple IOCTLs with the larger ones that will depend on changes outside of nvdrv being left for future commits. This is enough to partly run oss-nvjpeg.
The element containing the size first needs to be saved to a save slot with Save<T, slotId>, it can then be read back later as the size of a span with SlotSizeSpan<T, slotId>. This is needed to support the Host1XChannel Submit IOCTL.
Maxwell3D registers were primarily written with absolute offsets and ended up being fairly messy due to attempting to emulate this using struct relative positioning resulting in a lot of pointless padding members. This has now been improved by utilizing `OffsetMember` to directly use offsets resulting in much neater code.
It was found to be semantically advantageous to directly pass-through certain operators such as the assignment (`=`) and array index (`[]`) operators. These would require a dereference prior to their usage otherwise but now can be directly used.
The offset of a member in a structure was determined by its relative position and compiler alignment. This is unoptimal for larger structures such as those found in GPU Engines that are primarily named by offset rather than relative positioning and end up requiring a massive amount of padding to function as is. A solution to this problem was simply to supply member offsets directly which can be done by using `OffsetMember` alongside a `union`.
We used to manually call JNI UTF-8 string allocation and deallocation functions when utilizing a `jstring` but this could be erroneous and is just inconvenient. All of this has now been consolidated into an class `JniString` which is a wrapper around `std::string` and creates a copy of the contents of the `jstring` in its constructor and passes them into the `std::string` constructor.
The Vulkan Pipeline Barriers were unoptimal and incorrect to some degree prior as we purely synchronized images and not staging buffers. This has now been fixed and improved in general with more relevant synchronization.
`EmulationActivity.vibrateDevice` would assert when a `null` Vibrator is provided due to one not being set in the controller configuration. This has now been fixed by the code not playing a vibration when a vibration device isn't selected.
The guest -> host vibration conversion code was entirely broken as it didn't set the vibration `start`/`end` timestamps correctly for a cycle nor did it subtract from the `totalAmplitude` (`currentAmplitude` now) when it a cycle ended due to an incorrect `if` statement and contents. It would just end up saturating the amplitude as much as possible by adding more and more to `totalAmplitude` on every cycle while never subtracting which is entirely wrong and led to a very noticeable drop in amplitude when a vibration was repeated.
It's been entirely reworked to fix all the issues listed above and remove a lot of code that had no understandable purpose. More comments have also been added to the code to make it more readable with better variable and function naming alongside it.
To offset some of the performance overhead of using debug builds, we now optimize all libraries using `-Ofast` while building Skyline itself with `-O0`.
The version of libcxx shipped with Android NDK is fairly outdated and doesn't contain several features we desire such as C++ 20 ranges. This has been fixed by using libcxx directly from the LLVM Project which has been added as a submodule and can be updated independently of NDK.
We've moved to using a beta AGP as `7.0.2` is breaks `clangd` and other C++ features on Beta/Canary Android Studio. NDK was additionally updated with `mbedtls` to fix warnings caused by it alongside some other minor fixes to code for newer versions of libcxx.
The new AGP has a bug where it does not look for executables specified in `android_gradle_build.json` in `PATH` that includes `ninja` which is provided by the `ninja-build` package on the system rather than Android SDK's CMake on GitHub Actions (Ubuntu 20.04). This has been fixed by symlinking `/usr/bin/ninja` to the project root which is searched in for the `ninja` executable.
Locking `KProcess::threadMutex` when a process is being killed by another thread with `join` can lead to the non-joining killer effectively joining as it's waiting on the joining killer to relinquish the mutex. This has been fixed by having an atomic boolean tracking if the process has already been killed and if it has, immediately returning prior to locking the mutex for any non-joining killers.
Resampling would sometimes perform an OOB read into `inputBuffer` due it not containing enough data to calculate corresponding the output sample, this has been fixed by introducing bounds checking to ensure that the buffer has enough data.
The method used to finish (`finishAndRemoveTask`) an activity prior to going back to `MainActivity` or restarting the process led to the process prematurely exiting entirely and would result in it not being restarted or another activity not being launched. This has now been fixed by utilizing `finishAffinity` in its place which correctly only ends the activities with the same affinity as the caller.
Members of `GuestTexture` were apparently not being initialized and this led to UB since they would be read as random values. Titles such as Super Mario Odyssey avoided setting `baseArrayLayer` which led to it being left at the default value which was completely random and this would lead to crashes. This commit fixes this by initializing said values correctly.
Some titles don't clear the output buffer prior to submission, as the service is expected to fill all of it in, our audren implementation is incomplete and doesn't end up doing this leaving the contents of the buffer to be undefined leading to UB in the form of SEGFAULTs or the application throwing a fatal error. This has been patched over by 0-filling the buffer which is a sane default value for the fields that aren't filled in albeit not a replacement for a proper audren implementation.
Certain titles can submit logs where the last field is one off by the buffer end, the logger loop now considers this and terminates if there isn't enough data left to read the field type and length.
Access to the `vibrations` field in `vibrations[3].period` could lead to UB, this has been replaced with a proper check which adds up the period over all vibrations instead. A minor cleanup with variable names and explicit types for integer arithmetic has also been done.
If a non-builtin vibrator was attempted to be fetched, it'd insert it in the vibrator cache and return directly as opposed to playing the vibration on it prior to returning. This has now been fixed, the value is both put into the cache and the vibration is played on it.
The decomposition from `texture::Dimension` to `vk::Rect2D` was somehow implicit and completely incorrect resulting in wrong conversion with undefined values. It's now been fixed by explicitly setting `vk::Rect2D::extent` to `scissor` specifically.
The second parameter of `std::string_view::substr` was assumed to be an end position (similar to `std::span`) rather than `count` which it is. As a result of this, it was entirely broken but only held together by a constant factor being subtracted from it which was derived by trial and error. It's now been fixed by returning a count rather than the absolute position.
Library headers would produce errors that are out of our control and as a result of that, we just want to ignore this. This is possible by including the offending headers as system headers, compilers don't emit any warnings arising from them. This was extended to all libraries rather than just those which currently emitted warnings for consistency's sake.
Fix a bug where attempting to launch Skyline from the launcher while emulation was in progress would result in `MainActivity` launching rather than `EmulationActivity`. We always want `EmulationActivity` to stay on top of the stack and be launched whenever Skyline is resumed, no other activity should be able to run in parallel to `EmulationActivity` in any user-accessible manner.
Guest-driven exiting could cause objects left on the heap due to a `std::longjmp` from high up in the host call stack, this has been fixed by introducing `ExitException` which implicitly unrolls the stack with the exception handling mechanism.
* Resolves dependency cycles in some components
* Allows for easier navigation of certain components like `span` which were especially large
* Some imports have been moved from `common.h` into their own files due to their infrequency
* Update licenses for dependent projects
* Add copyright notices (as provided)
* Revamp styling for `LicenseDialog`
* Fix invisible `PreferenceDialog` buttons in Settings
* Consolidating color variables into `colorPrimary`, `backgroundColor` and `backgroundColorVariant`
* Use `com.google.android.flexbox:flexbox:3.0.0` (Google Maven) rather than `com.google.android:flexbox:2.0.1` (Bintray)
* Clean Exiting was improved by implementing a robust system for when to abandon clean exiting and simply restart the process alongside moving clean exiting to the background when the application is quit by using the back button
* Audio is now automatically paused whenever the application is moved to the background and automatically resumed when it's brought to the foreground
* The system language setting had several errors and inconsistencies which have now been fixed, it's been brought more in line with HOS language (Albeit not entirely due to no region setting in Skyline)
* Fix a bug with `ThreadLocal` where the atomic `list` pointer was uninitialized resulting in a `SEGFAULT` during the destructor
* Fix handling `SA_EXPOSE_TAGBITS` bit being set in Android 12 `sigaction`
* Fix CMake bug using `CMAKE_INTERPROCEDURAL_OPTIMIZATION_RELEASE` when not supported causing `-fuse-ld=gold` to be emitted as a linker flag
* Support using `VIBRATOR_MANAGER_SERVICE` rather than `VIBRATOR_SERVICE` on Android 12
* Optimize Imports for Kotlin code
* Move away from deprecated APIs in Kotlin or explicitly mark where it's not possible
* Update SDK, NDK and libraries
* Enable Gradle Configuration Cache
These are used heavily in OpenGL games, which now, together with the
previous syncpoint changes, work perfectly. The actual implementation is
rather novel as rather than using a per-class state machine for all
methods we only use it for those that are known to be split across
GpEntry boundaries, as a result only a single bounds check is added to
the hot path of contiguous method execution and the performance loss is
negligible.
* Fix `AddClearColorSubpass` bug where it would not generate a `VkCmdNextSubpass` when an attachment clear was utilized
* Fix `AddSubpass` bug where the Depth Stencil texture would not be synced
* Respect `VkCommandPool` external synchronization requirements by making it thread-local with a custom RAII wrapper
* Fix linear RT width calculation as it's provided in terms of bytes rather than format units
* Fix `AllocateStagingBuffer` bug where it would not supply `eTransferDst` as a usage flag
* Fix `AllocateMappedImage` where `VkMemoryPropertyFlags` were not respected resulting in non-`eHostVisible` memory being utilized
* Change feature requirement in `AndroidManifest.xml` to Vulkan 1.1 from OGL 3.1 as this was incorrect
Allows the execution of multiple channels at the same time, with locking
being performed on the host GPU scheduler layer, address spaces can be
bound to one or more channels.
Infrastructure for always syncing textures has been introduced now, they will be synced prior to and after every execution. This does considerably reduce the performance alongside waiting on GPU execution to finish but it will be partially recouped once conditional syncing is performed.
* Move Shared Font TTFs to AAsset storage + Support external shared font loading from `/data/data/skyline.emu/data/fonts`
* Fix bug in `IApplicationFunctions::PopLaunchParameter` caused by ignoring `LaunchParameterKind`
* Fix bug with Choreographer causing it to be awoken and exit prior to the destruction of `PresentationEngine`
* Fix bug with `IDirectory::Read` where it used `inputBuf` for the output buffer rather than `outputBuf`
* Improve `GetFunctionStackTrace` logs when `dli_sname` or `dli_fname` are missing
* Support more RT Formats
Support for subpasses was added by reworking attachment reuse code to account for preserved attachments and subpass dependencies. A lot of RT formats were also added to allow SMO to boot up entirely, it should be noted that it doesn't render anything.
`FenceCycle` had a cyclic dependency which broke clean exit, we now utilize `std::weak_ptr<FenceCycle>` inside the `Texture` object. A minor fix for broken stack traces was also made caused by supplying a `nullptr` C-string to libfmt when a symbol was unresolved which caused an `abort` due to invocation of `strlen` with it.
This commit introduces the `CommandExecutor` which is responsible for creating and orchestrating a Vulkan command graph comprising of `CommandNode`s that construct all the objects required for rendering. As a result of the infrastructure provided by `CommandExecutor`, `ClearBuffers` could be implemented and be appropriately utilized.
A bug regarding scissors was also determined and fixed in the PR, the extent of them were previously inaccurate and this has now been fixed.
Note: We don't synchronize any textures from the guest for now as this would override the contents on the host, this'll be fixed with the appropriate write tracking but it also results in a black screen for anything that writes to FB
This commit fixes a major issue with command buffer allocation which would result in only being able to utilize a command buffer slot on the 2nd attempt to use it after it's freed, this would lead to a significantly larger amount of command buffers being created than necessary. It also fixes an issue with the command buffers not being reset after they were utilized which results in UB eventually.
Another issue was fixed with `FenceCycle` where all dependencies are only destroyed on destruction of the `FenceCycle` itself rather than the function where the `VkFence` was found to be signalled.
This commit implements a filter by type for any validation layer output, this allows filtering out any logs which may be unnecessary and additionally triggering a breakpoint as required.
An issue concerning the `NDEBUG` flag never being set was fixed, it's now supplied as a release compiler flag. The issue can manifest itself by always relying on a validation layer even though it shouldn't on release, this is why the validation layer was mistakenly disabled entirely previously by using `#ifndef` rather than `#ifdef`.
An issue with the initial layout of a texture being supplied as neither `VK_IMAGE_LAYOUT_UNDEFINED` or `VK_IMAGE_LAYOUT_PREINITIALIZED` was fixed, these cases are now handled by transitioning to those layouts after creating the image rather than supplying it within `initialLayout`.
Another issue was fixed regarding not maintaining a transformation after a surface has been destroyed and recreated existed and manifested itself when the user would go out of the app and come back in, they would see the surface having an identity transformation rather than the desired one.
Fixes bugs with the Texture Manager lookup, fixes `RenderTarget` address extraction (`low`/`high` were flipped prior), refactors `Maxwell3D::CallMethod` to utilize a case for the register being modified + preventing redundant method calls when no new value is being written to the register, and fixes the behavior of shadow RAM which was broken previously and would lead to incorrect arguments being utilized for methods.
Implement the groundwork for the texture manager to be able to report basic overlaps and be extended to support more in the future. The Maxwell3D registers `RenderTargetControl`, `RenderTarget` and a stub for `ClearBuffers` were implemented.
A lot of changes were also made to `GuestTexture`/`Texture` for supporting mipmapping and multiple array layers alongside significant architectural changes to `GuestTexture` effectively disconnecting it from `Texture` with it no longer being a parent rather an object that can be used to create a `Texture` object.
Note: Support for fragmented CPU mappings hasn't been added for texture synchronization yet
Utilize Boost Container's `small_vector` for optimizing allocations, fix certain implicit casting issues and make `ILogger` not output an additional newline in the log when the application supplies one at the end of the log
The format provided in `GraphicBuffer` can be misleading and is supplied as `None` by the Deko3D Swapchain, it instead supplies the real format in the `NvGraphicHandle` which we now utilize instead of the one in `GraphicBuffer`.
KTransferMemory needs to be reset to RW on destruction unlike KSharedMemory which is simply freed on destruction, not emulating this behavior accurately leads to `deko_examples` from `switch-examples` to lead to a SEGFAULT on selecting an example as it expects the memory to be R/W while it ends up being freed instead
The unique pointer to a device in the map was simply reset rather than deleting the entry from the map, this resulted in the device not being properly closed and when the device was reopened then the `emplace` was a NOP as the entry already existed. This resulted in a `nullptr` dereference down the line when an application attempted to issue an IOCTL to a device that was previously closed and reopened. This is known to occur in Deko3D as it recreates the context when loading an example which includes closing and reopening devices.
A hotfix for a nvdrv bug where an IOCTL with no input/output buffers would crash and a major `nvmap` bug which broke the `FromId` IOCTL as it didn't write back the handle ID, another minor bug existed in `nvhost` where the `ZCullGetInfo` IOCTL was `INOUT` rather than `OUT`.
A bug with NACPs was also fixed caused by incorrect padding for the `NacpData` structure which resulted in the `saveDataOwnerId` member being read incorrectly and as a result the save data folder being incorrect.
Co-authored-by: artem8086 <artemsvyatoha@gmail.com>
Swapped out the usages of frozen constexpr unordered maps for switch statements, which are very likely to be turned into jump tables given the nature of the enums used, resulting in better performance than a map
Unlike `ListPreference`, this preference class uses integers as its values instead of strings, avoiding unnecessary casting. It also doesn't require an array for values: in that case it will be using the clicked entry position as its value.
Using a u32 for the loop index prevents masking on all increments,
giving a moderate performance increase.
Passing methods as u32 parameters and stopping subChannel being passed
gives quite a significant increase when combined with the inlining
allowed by subchannel based engine selection.
The implementation of GPU channels and Host1X channels will be split up
as it allows a much cleaner implementation and less undefined behaviour
potential.
This will be required later for NVDEC/SMMU support and fixes many
significant issues in the previous implementation.
Based off of my 2.0.0/12.0.0 nvdrv REs.
The syncpoint manager has beeen given convinience functions for fences
which remove the need to access the raw id/threshold most of the time
and various accuracy fixes and cleanups to match HOS 12.0.0 have also
been done.
Implements the 'csrng:' service using C++ <random>'s Mersenne Twister, this does make it insecure for cryptographic purposes but it is pointless to attempt to do this regardless as we cannot ensure that the guest will run in a secure environment which cannot be mutated by an attacker. Used by Prison Princess, Pokemon Cafe Mix, Paint your Pet and more.
Encountered in 不如帰大乱 when `HOS-3` is awoken at the same time as `HOS-0` called `SvcSetThreadCoreMask` resulting in a deadlock where `HOS-0` owns `HOS-3`'s `coreMigrationMutex` while `HOS-3` owns the core mutex with the both of them attempting to lock the other mutex
We've moved from using an AAR for Mbed TLS to a submodule as the AAR was packaged manually and used from a local repository which ended up being very hacky and resulted in Linter errors, it could also not be updated with ease as it would need to be repackaged. All of these issues have been solved by moving to a git submodule tied to the official Mbed TLS GitHub repository.
Sticky transforms have been stubbed, as they are on HOS/Android. Certain titles like Xenoblade Chronicles end up setting the sticky transform even if it doesn't do anything, as a result of this we cannot throw an exception for it and stub it without an exception (Aside from the cases where the value isn't recognized).
The following GraphicBufferProducer transactions were implemented:
* `SetBufferCount`
* `DetachBuffer`
* `DetachNextBuffer`
* `AttachBuffer`
It should be noted that `preallocatedBufferCount` (previously `hasBufferCount`) and `activeSlotCount` were adapted accordingly with how they were effectively the same value as all active buffers were preallocated prior but now there can be a non-preallocated active slot.
Additionally, a bug has been fixed where `SetPreallocatedBuffer` has the graphic buffer as an optional argument whereas it was treated as a mandatory argument prior and could lead to a SEGFAULT if an application were to not pass in a buffer.
VI/IHOSBinder suffered from major inaccuracies in their function due to being quickly thrown together initially with little concern for accuracy, this has now been fixed with them being substantially more accurate now.
`ENUM_STRING` now has a unified implementation in <common/macros.h> with a documented format and can be used throughout the codebase.
A major performance regression was added in the Host1X Syncpoint revamp as it did a syscall if there were any waiters during `Increment` even if they would just be woken up and go back to sleep as the threshold wasn't hit. It has now been optimized to only do a wake if any waiting thread needs to be awoken.
There was also a bug concerning increment where it would perform actions corresponding to the previous increment rather than the current one which has also been fixed.
We used instantaneous values for FPS previously which led to a lot of variation in it and the inability to determine a proper FPS value due to constant fluctuations. All FPS values are now averaged to allow reading out a stable value and a deviation statistic has been added for the frame-time to judge judder and frame-pacing which allows for a significantly better measure of overall performance. The formatting for all the floating-point numbers is now fixed-point to prevent shifting of position due to decimal digits becoming 0.
Support for the following parameters was added to `QueueBuffer`:
* Earliest Present Timestamp
* Swap Interval
* Crop
* Scaling Mode
* Transform
* Frame ID (Not returned to guest yet)
We utilize ANativeWindow APIs directly to achieve all of this in an efficient manner since HWC will be used directly for it, we do plan to introduce Vulkan equivalents for all of these operations later down the line for a port to non-Android platforms.
We had issues when combining host and guest presentation since certain configurations in guest presentation such as double buffering were very unoptimal for the host and would significantly affect the FPS. As a result of this, we've now made host presentation have its own presentation textures which are copied into from the guest at presentation time, allowing us to change parameters of the host presentation independently of the guest.
We've implemented the infrastructure for this which includes being able to create images from host GPU memory using VMA, an optimized linear texture sync and a method to do on-GPU texture-to-texture copies.
We've also moved to driving the V-Sync event using AChoreographer on its on thread in this PR, which more accurately encapsulates HOS behavior and allows games such as ARMS to boot as they depend on the V-Sync event being signalled even when the game isn't presenting.
This commit reworks the `Texture` class to include a Vulkan Image backing that can be optionally owning or non-owning and swapped in with consideration for Vulkan image layout, it also adds CPU-sided synchronization for the texture objects with FenceCycle. It also makes the appropriate changes to `PresentationEngine` and `GraphicBufferProducer` to work with the new `Texture` class while setting the groundwork for supporting swapchain recreation. It also fixes a log in `IpcResponse` and improves the display mode selection algorithm by further weighing refresh rate.
Implements a wrapper over fences to track a single cycle of activation, implement a Vulkan memory manager that wraps the Vulkan-Memory-Allocator library and a command scheduler for scheduling Vulkan command buffers
This commit makes GraphicBufferProducer significantly more accurate by matching the behavior of AOSP alongside mirroring the tweaks made by Nintendo.
It eliminates a lot of the magic structures and enumerations used prior and replaces them with the correct values from AOSP or HOS.
There was a lot of functional inaccuracy as well which was fixed, we emulate the exact subset of HOS behavior that we need to. A lot of the intermediate layers such as GraphicBufferConsumer or Gralloc/Sync are not emulated as they're pointless abstractions here.
This commit adds in VkSurface/VkSwapchain initialization and recreation. It also adapts GraphicsBuffferProducer and Texture to fit in with those changes but it doesn't yet implement presenting those buffers nor uploading guest buffers onto the host.
Vulkan Device initialization is handled now, it supports required extensions but support for optional extensions/features/properties will come in later when we require those. In addition, we now correctly report the version of Skyline to Vulkan which can be accessed from debugging tools.
There's also a minor change regarding the search pattern for `SkylineLibraries` which now only searches in headers of libraries and it also explicitly excludes the redundant `vulkan.hpp` from the `Vulkan-Headers` repository.
The GPU class has been extended in this for Vulkan initialization, this is done to the point of initializing the instance alongside loading in `VK_LAYER_KHRONOS_validation` which is also now packed into all Debug APKs for Skyline. In addition, `VK_EXT_debug_report` is also initialized and it's output is piped directly into the Logger.
A minor change regarding the type of the `Fps` and `Frametime` globals was changed to `skyline::i32`s which is a more suitable type due to those having a smaller chance of overflowing while being signed as Java doesn't have unsigned integral types.
As both of these are in the same memory segment they have no individual
alignment requirements, this created a bug in
にゃんらぶ～私の恋の見つけ方～ where the data segment would be larger
than the game expected and invalid command line arguments would be read.
armed.
It was discovered during testing of 'Hatsune Miku Project DIVA: Mega Mix'
that if a thread was starting while preemption was being enabled a NULL
pointer dereference could occur in the timer_settime call as
timer_create may not have been called yet.
This is used by games before calling into nvdec in order to clock up the
HW module, it can also be used to request a RAM frequency. Since we
obviously don't emulate the hardware down to this level a basic stub
that provides the correct reponses is enough.
Fixes a crash on first level of Super Mario Odyssey.
We used a custom version of Vulkan-Hpp which split the files a lot prior to avoid any developers needing to manually set IDE settings for IntelliJ to work but this wasn't practical due to how it required modifications to Vulkan-Hpp's generator which would make maintenance extremely difficult. It was determined that we should just add the requirement for changing the IDE settings and use Vulkan-Hpp directly.
An RAII scoped trace was used for SvcWaitSynchronization but it was placed within a condition scope which led to an incorrect lifetime for the traces. Minor changes regarding the CR not affecting functionality were made aside from that.
We decided to restructure Skyline to draw a layer of separation between guest and host GPU. We're reserving the `gpu` namespace and directory for purely host GPU and creating a new `soc` directory and namespace for emulation of parts of the X1 SoC which is currently limited to guest GPU but will be expanded to contain components like the audio DSP down the line.
This just disables all compiler warnings generated while compiling TZCode as those are irrelevant while compiling Skyline and need to be tackled in that repository.
This fixes audio stuttering which occurred on certain BT audio devices by requesting an exclusive stream from Oboe alongside a low-latency stream.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Add Tracing for SVCs, Services, NVDRV, and Synchronization Primitives. In addition, fix `TRACE_EVENT_END("guest")` being emitted when a signal is received while being in the guest rather than host which would cause an exception. This commit also disables warnings for the Perfetto library as we do not control fixing them.
This extend a descriptor table for the SVCs with names for every SVC alongside their function pointer. The names are then used for logging and eventually tracing.
This moves from using std::function with a this pointer binding (which would likely cause a heap allocation) to returning the this pointer in a structure which implements operator() to do the call with it. It also moves to using const char* for strings from std::string_view which was pointless in this scenario due to it's usage being limited to being a C-string for the most part, it also integrates the class name directly into the string which allows us to avoid runtime string concatenation in libfmt and RTTI for finding the class name.
* Improve KMemory Comments
* Add parameter prefix 'p-' to `KPrivateMemory::UpdatePermission`
* Fix the missing trailing double quote in missing service prints, this was due to `stringName` being padded with extra 0s
Mainly just adapts the rest of time to add some things missed in the
initial commit as they required TZ, everything else is just renames from
switchbrew and comments.
This serves as an extension to the initial time commit and combined
they provide a complete implementation of everything application facing
in time.
psc:ITimeZoneService and glue:ITimeZoneService are used to convert
between POSIX and calendar times according to the device location.
Timezone binaries are used during the conversion, details of them can
be read about in the previous commit.
This is based off my own glue RE and Thog's time RE.
This reimplements our time backend to be significantly more accurate to
the real PSC and provides complete implementations for every time IPC
allowing many newer games to work properly.
Time is unique in its use of glue services, the core sysmodule is fully
isolated and doesn't interface with any other services. Glue is instead
used where that is needed (e.g. for fetching settings), this distinction
is also present in our implementation.
Another unique feature of time is its global state, as time is
calibrated from the start of the service its state cannot be lost as
that would result in the application offsetting time incorrectly
whenever it closed a session.
A large proportion of this is based off of Thog's 9.0.0 PSC reversing.
These are used for timezone conversions between POSIX and calander time.
Tzdata is in exactly the same format as HOS to allow loading sysarchives
in the future if needed. See its README for more info.
Details on tzcode can be found in its own repo, there are several
changes done Vs the base release to allow for HOS compat.
These only implement the subset of VFS needed for time, implementing
more is difficult due to some issues in the AAsset API which make
support quite ugly. The abstract asset filesystem can be accessed by
services through the OS class allowing other implementations to be used
in the future.
There was a mistake in the code-style refactor where the signature in the instruction encoding of `MRS` was set to `0xD54` instead of `0xD53` which would cause a SIGILL (Illegal Instruction) for devices which had their HW timer frequency equivalent to the Switch (19.2MHz) as a modified `MRS` would be deployed there. This issue should not affect devices which perform clock rescaling as the `MRS` instruction there is encoded by the assembler.
Many users of VFS didn't check for nullptr or 0 results leading to
various potential issues, to mitigate this introduce error checking to
VFS by default. The original variants can still be used through the
*Unchecked family of functions.
This allows better validation and simplified default argument handling.
Could also be useful in the future when we switch to proper VFS error
reporting.
* Pushbuffer data is now stored in a member buffer to avoid reallocating
it for each pushbuffer which hampered performance before.
* Don't prefetch pushbuffers as it puts unnecessary load on the guest
thread that is better suited for the GPFIFO thread.
* Clean up some misc code to avoid pointless casts of a 4 byte object
and handle GPFIFO control opcodes.
NvHostEvents were renamed to SyncpointEvents which is a much clearer
name that more accurately describes them. Locking is needed as IOCTLs
can be called asynchronously and so event registration and signalling
can race.
The following scheduler bugs were fixed:
* It was assumed that all non-cooperative `Rotate` calls were from a preemptive yield and changed the state of `KThread::isPreempted` incorrectly which could lead to UB, an example of a scenario with it would be:
* * Preemptive thread A gets a signal to yield from cooperative thread B due to it being ready to schedule and higher priority
* * A complies with this request but there's an assumption that the signal was actually from it's preemption timer therefore it doesn't reset it (As it isn't required if the timer was responsible for the signal)
* * A receives the actual preemption signal a while later, causing UB as the signal handler is invoked twice
* `Scheduler::UpdatePriority`
* * A check for `currentIt == core->queue.begin()` existed which caused an incorrect early return
* * The preemption timer was armed correctly when a priority transition from cooperative priority -> preemption priority occurred but not disarmed when a transition from preemption priority -> cooperative priority occurred
* * The timer was unnecessarily disarmed in the case of updating the priority of a non-running thread, this isn't as much a bug as it is just pointless
* Priority inheritance in `KProcess::MutexLock` is fundamentally broken as it performs UB with `waitThread` being accessed prior to being assigned
* When a thread sets its own priority using `SvcSetThreadCoreMask` and its current core is no longer in the affinity mask, it wouldn't actually move to the new thread until the next time the thread is load balanced
This addresses all CR comments including more codebase-wide changes arising from certain review comments like proper usage of its/it's and consistent contraction of it is into it's.
An overhaul was made to the presentation and formatting of `KThread.h` and `LoadBalance` works has been superseded by `GetOptimalCoreForThread` which can be used alongside `InsertThread` or `MigrateToCore`. It makes the API far more atomic and neater. This was a major point of contention for the design prior, it's simplified some code and potentially improved performance.
The case of a thread not being in the core queue during a non-cooperative core affinity change would break things as the thread was non-conditionally removed and inserted, this has been fixed by adding a check to see if the thread exists in the core's queue prior to migration. In addition, `yieldWithCoreMigration` was broken by the previous commit as the fallthrough was intentional and removing it cause core migration without a yield which led to breakage in certain circumstances. The mutex locking logic was also improved in `ConditionalVariableWait` to use atomics in a more effective manner with less atomic operations being performed overall.
The code region's size was previously set at the same value as it is for 36-bit ASes, this value is inadequate for certain larger games and needed to be expanded. We've chosen 4GiB as the new value which should easily encompass all Switch games.
The SVCs improvements are as follows:
* Make SVC logs more concise for:
* * `SleepThread`
* * `ClearEvent`
* * `CloseHandle`
* * `ResetSignal`
* * `WaitSynchronization` (Special case for single handle)
* * `ArbitrateLock`
* * `ArbitrateUnlock`
* * `WaitProcessWideKeyAtomic`
* * `SignalProcessWideKey`
* Fix unintentional fallthrough into `yieldWithoutCoreMigration` from `yieldWithCoreMigration` in `SleepThread`
* Return `result::InvalidState` when an unsignalled handle is reset in `ResetSignal`
* Return `Result{}` (Success) in `CancelSynchronization`
* Do not return `result::InvalidCurrentMemory` in `ArbitrateLock` as it's not a failure condition
* Make `count` in `WaitProcessWideKeyAtomic` a `i32` from a `u32`, zero and all negative values result in waking all waiters
The entirety of the address arbiter is implemented in this commit, all three arbitration types: `WaitIfLessThan`, `DecrementAndWaitIfLessThan` and `WaitIfEqual`, and all three signal types: `Signal`, `SignalAndIncrementIfEqual` and `SignalAndModifyBasedOnWaitingThreadCountIfEqual` have been implemented.
This allows any application which uses levent (Light Events) to function which includes titles such as ARMS.
We did not support migration of threads which were running in a non-cooperative manner, this was partially due to the dependence on per-core conditional variables rather than per-thread which made this harder to do programmatically. This has been fixed by moving to per-thread cvars and therefore the limitation can be removed, this feature is used by Unity games.
SvcClearEvent previously set the `signalled` flag directly rather than
calling `ResetSignal`, which skipped the locking necessary to make it
globally visible. Switch it to use `ResetSignal` to fix this.
We've moved to using RS and GS from ASCII as delimiters rather than
'\n' and '|', this allows more robust parsing and increases the
readability of the log files
This prevents a race where two threads could read at the same time and
end up using the wrong IV leading to garbage data being read. This
caused crashes in several games including Celeste.
This was causing a significant amount of sched thrashing and pinning a
core to 100% as games constantly updated audren, now change it to only
signal on buffer release.
This caused the menus in Sonic Mania to be nonfunctional, futhermore,
default init is not ran for the input structs so the default max
definition in CommonHeader never actually applied.
CircularQueue was looping around too early resulting in the wrong
pushbuffers being used. The debug logging is useful for interpreting the
GPU method call logs.
Exefs loading was changed to check if an NSO exists before trying to
read it, preventing exceptions that get annoying while debugging.
* 'Fix' memory accounting to not measure reserved regions
* Fix some copy bugs introduced by switch to span
* Correct remap the behaviour of Modify so it actually works
An exceptional signal handler allows us to convert an OS signal into a C++ exception, this allows us to alleviate a lot of crashes that would otherwise occur from signals being thrown during execution of games and be able to handle them gracefully.
* Fix alignment handling in NvHostAsGpu::AllocSpace
* Implement Ioctl{2,3} ioctls
These were added in HOS 3.0.0 in order to ease handling ioctl buffers.
* Introduce support for GPU address space remapping
* Fix nvdrv and am service bugs
Syncpoints are supposed to be allocated from ID 1, they were allocated
at 0 before. The ioctl functions were also missing from the service map
* Fix friend:u service name
* Stub NVGPU_IOCTL_CHANNEL_SET_TIMESLICE
* Stub IManagerForApplication::CheckAvailability
* Add OsFileSystem Directory support and add a size field to directory entries
The size field will be needed by the incoming HOS IDirectory support.
* Implement support for IDirectory
This is used by applications to list the contents of a directory.
* Address feedback
This patch reduces the burden of adding services significantly, rather
than having to create an enum entry and add strings in the constructor
it will all be determined at runtime through RTTI. A macro is also used
in the service creation case to reduce clutter.
* Fix NvHostCtrl:EventSignal event ID parsing
* Divide the audout buffer length by the sample size
* Correct audout channel quantity handling
* A few bugfixes for audio tracks
* * Correctly lock in CheckReleasedBuffers and only call the callback once
* * Check if the identifier queue is empty before accessing it's iterator
* Refactor audio to better fit the codestyle
* Explictly specify reference when using GetReference
* Fix CheckReleasedBuffers
This commit significantly increases the accuracy of the prior HID code due to testing on the Switch. It is now fully accurate in all supported scenarios, them being assignment mode, orientation, color writes and system properties. In addition, review comments were addressed and fixed in the PR.
This fixes a Joy-Con Pair bug which caused a crash when a partner device was set to none while being set as a partner. In addition, the following HID service functions were implemented:
* GetSupportedNpadStyleSet
* ActivateNpadWithRevision
* GetNpadJoyHoldType
* AcquireNpadStyleSetUpdateEventHandle
This commit adds support to the C++ end of things for controller configuration. It isn't targeting being 1:1 to HOS for controller assignment but is rather based on intuition of how things should be.
This commit adds in the UI for Controller Configuration to Settings, in addition to introducing the storage and loading of aforementioned configurations to a file that can be saved/loaded at runtime. This commit also fixes updating of individual fields in Settings when changed from an external activity.
This commit focuses on making the UI completely usable using a controller so that a user won't have to switch between their device's touch screen and a controller constantly.
This commit refactors the C++ end of Input so it'll be in line with the rest of the codebase and be ready for the extension with multiple players and controller configuration.
This commit contains the Kotlin side of the initial Input implementation, this is based on the work done in the `hid` branch in `bylaws/skyline`.
Co-authored-by: ◱ PixelyIon <pixelyion@protonmail.com>
This commit contains the C++ side of the initial Input implementation, this is based on the work done in the `hid` branch in `bylaws/skyline`.
Co-authored-by: ◱ PixelyIon <pixelyion@protonmail.com>
interpreter.
The Maxwell 3D engine handles all 3D rendering, currently only non
rendering related methods are implemented. Macros are small pieces of
code that run on the GPU and allow methods to be quickly called for
things like instanced drawing.
These are used to allow the CPU to synchronise with the GPU as it
reaches specific points in its command stream.
Also fixes an nvmap bug where a struct was incorrect.
bugs
An engine is effectively a HW block in the GPU, the main one is the
Maxwell 3D which is used for 3D graphics. Engines can be bound to
individual subchannels and then methods within them can be called
through pushbuffers.
The engine side of the GPFIO is also included, it currently does nothing
but will need to be extended in the future with semaphores.
* Rework VFS to support creating and writing files and introduce OsFileSystem
OsFileSystem abstracts a directory on the device using the filesystem API.
This also introduces GetEntryType and changes FileExists to use it.
* Implement the Horizon FileSystem APIs using our VFS framework
Horizon provides access to files through its IFileSystem class, we can
closely map this to our vfs::FileSystem class.
* Add support for creating application savedata
This implements basic savedata creation using the OsFileSystem API. The
data is stored in Skyline's private directory is stored in the same
format as yuzu.
* Make sure icons have a 1:1 ratio
* Use recyclerview padding to increase grid edge margins
* Fix race condition in searching roms
* Use notify insert for adapter
The GPU has it's own seperate address space to the CPU. It is able to
address 40 bit addresses and accesses the system memory. A sorted vector
has been used to store blocks as insertions are not very frequent.
unmapped regions
svcQueryMemory will return a valid descriptor for anything in the
address space, from 0 to 1 << addrSpaceBits, this was handled
incorrectly before and we were only returning descriptors if the
address was in a mapped region.
If an address in an unmapped region is requested then the extents of the
unmapped region up to the address space end are returned. If the address
requested is outside of the address space then the extents of the
inaccessible address space are returned.
To facilitate this support was added to MemoryManager::Get for
generating the extents of unmapped regions using the chunk list.
As the stack is automatically mapped in the guest by `clone` we do not
need to explicitly map it. This adds a flag to solve the issue.
Also mark the stack as stack rather than reserved.
Not zeroing the sample buffer causes issues when a voice is started but
is playing no samples. The system event handling was also reworked
according to Thog's info.
This fixes two bugs in IPC that were discovered when running Puyo Puyo
Tetris.
The CloneCurrentObject control IPC will now correctly return the handle
of the newly created object through move handles, rather than pushing it
as a result.
The size array of u16s with the sizes of each C buffer is now taken into
account when reading them. Before this change C buffers were entirely
broken.
This gives some useful warnings for less significant issues.
Warnings for reordering are left disabled as they are rather pedantic
and serve little benefit.
