The excessive blocking caused by initial compilation happening async to the guest caused issues in some cases, now we have a Vulkan pipeline cache to speed it up we can wait for a full compile before launch without too many issues.
By only using what we need, and mirroring the descriptor structs to allow for much tighter packing (while keeping the same member names) we can reduce pipeline memory to about 1/3 of what it was before.
Certain titles such as Super Smash Bros Ultimate can use SVC `UnmapPhysicalMemory` to punch holes into physical memory mappings, this wasn't handled correctly as we completely deleted the portion after the hole. It has now been fixed which results in these titles which depend on this behavior to work now.
Since the waitermutex is only ever locked for a short amount of time, spinning in contention-heavy scenarios ends up quite a bit more efficient than a kernel wait.
This removes the need to concatenate the variable multiple times, recycles the scaled bitmap after it has been stored, addresses the Android Studio complaint about that method name, and generates a preview of the current profile image as the preference icon.
The implementation for this service function wasn't added to the service function table. Additionally, the type for the output `ScalingMode` was implicitly `int` as it was unspecified in the `enum class` which has now been corrected to `u64` as it should be.
Due to broken drivers, it's possible to find no Vulkan physical devices but this can lead to a cryptic segfault. This explicitly checks for it instead and throws an exception which will be emitted into logcat thus can be easily caught.
Due to the trampoline and save/load context functions, `GetHookSectionSize` returned a non-zero size for when there were no hooked symbols supplied to it. This is problematic as it isn't required and hooking is currently not stable so it can lead to crashes or freezes in certain titles.
A thread can be paused while it is in a synchronization primitive which will do `RemoveThread`, we need to update the state of `insertThreadOnResume` in this case by clearing it so it isn't incorrectly reinserted on resuming the thread.
`Scheduler::UpdateCore` implicitly depended on `KThread::coreMigrationMutex` being locked during calls to it, this requirement has now been made explicit to avoid confusion.
When a timeout occurs in `ConditionVariableWait`, we used to check `waitMutex` which is cleared by `MutexUnlock` but when we hit the CAS case in `ConditionVariableSignal` then we don't clear `waitMutex`. It's far more reliable to check `waitThread` as an indication for if the thread has already been unlocked as it's cleared at the start of `ConditionVariableWait` and would implicitly stay cleared in the CAS case while being set in `MutexLock` and being unset in `MutexUnlock`.
There's multiple locations where a thread is yielded in the scheduler and all of them repeat the code of checking for `pendingYield` and signalling with an optional optimization of checking if the thread being yielded is the calling thread.
All this functionality has now been consolidated into `Scheduler::YieldThread` which checks for `pendingYield` and does the calling thread yield optimization. This should lead to better readability and better performance in cases where `UpdatePriority` would signal the calling thread.
`forceYield` was incorrectly not set when pausing running threads if the thread already had `pendingYield` set. This could lead to cases where `Rotate` would later throw an exception due to it being unset.
Blocking while inserting a paused thread can lead to deadlocks where the inserting thread later resumes the paused thread.
Co-authored-by: Billy Laws <blaws05@gmail.com>
As we didn't hold `coreMigrationMutex`, the thread could simply migrate during `InsertThread` which would lead to the thread potentially never waking up as it's been inserted on a non-resident core.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
`SignalToAddress`/`ConditionVariableSignal` need to wake waiters in priority order, while threads are inserted in order this doesn't remain the case as priority updates don't reinsert the thread into `syncWaiters`.
It was determined that reinsertion into `syncWaiters` would be fairly complex due to locking the `syncWaitersMutex` with the thread's mutexes. To avoid this, this commit instead sorts waiters by priority at signal time to always wake threads in the right order.
Calling `WaitSchedule` inside the block where `syncWaiterMutex` is locked causes a race with other threads which lock the core mutex and `syncWaiterMutex` together. This commit moves the `WaitSchedule` outside the block while simply setting a flag to wait later similar to `ConditionVariableWait`'s timeout case.
Co-authored-by: Billy Laws <blaws05@gmail.com>
This is a cause for a large amount of scheduler bugs so we should generally check for this on debug builds as it is a fairly easy way to check for issues for some performance cost.
The way we handled waking/timeouts of condition variables was fairly inaccurate to HOS as we moved locking of the mutex to the waker thread which could change the order of operations and would cause what were functionally spurious wakeups for all awoken threads.
This commit fixes it by doing all locks on the waker thread and only awakening the waiter thread once the condition variable was signalled and the mutex was unlocked. In addition, this fixes races between a timeout and a signal that could lead to double-insertion as a result of a refactor of how timeouts work in the new system.
`MutexLock` incorrectly returned `InvalidCurrentMemory` for cases where the userspace value didn't match the expected value. It's been corrected to return no error in those cases while preserving the error code for usage in `ConditionalVariableWait`.
We didn't read the values for arbitration atomically in all cases as we should have, this consolidates the reading of the value and uses the value across all cases.
A race could occur from the timeout path in `WaitForAddress` taking place at the same time as `SignalToAddress` has been caused, this causes a deadlock due to double-insertion.
Some games rely on the vsync event to schedule frames, by matching its timing with presentation we can reduce needless waiting as the game will immediely be able to queue the next frame after presentation.
This allows for the presentation engine to grab the presentation image early when direct buffers are in use, since it'll handle sync on its own using semaphores it doesn't need to wait for GPU execution.
By importing guest memory directly onto the host GPU we can avoid many of the complexities that occur with memory tracking as well as the heavy performance overhead in some situations. Since it's still desired to support the traditional buffer method, as it's faster in some cases and more widely supported, most of the exposed buffer methods have been split into two variants with just a small amount of shared code. While in most cases the code is simpler, one area with more complexity is handling CPU accesses that need to be sequenced, since we don't have any place we can easily apply writes to on the GPFIFO thread that wont also impact the buffer on the GPU, to solve this, when the GPU is actively using a buffer's contents, an interval list is used to keep track of any GPFIO-written regions on the CPU and any CPU reads to them will instead be directed to a shadow of the buffer with just those writes applied. Once the GPU has finished using buffer contents the shadow can then be removed as all writes will have been done by the GPU.
The main caveat of this is that it requires tying host sync to guest sync, this can reduce performance in games which double buffer command buffers as it prevents us from fully saturating the CPU with the GPFIFO thread.
This is necessary for the upcoming direct buffer support, as in order to use guest buffers directly without trapping we need to recreate any guest GPU sync on the host GPU. This avoids the guest thinking work is done that isn't and overwriting in-use buffer contents.
Extends the profile picture stub into a full-fledged implementation with the ability for users to set their profile picture in settings while having the Skyline icon as the default profile picture.
HOS's TIDs are one-based rather than zero-based, certain titles such as Pokémon Arceus, Naruto Shippuden: Ultimate Ninja Storm 3, Splatoon 3, etc. use the TID being zero as a sentinel value but as we assigned this ID to our first thread prior it broke this logic which has now been fixed by this commit as it now matches HOS behavior.
All writes are done async into a staging file, which is then merged into the main pipeline cache file at the time of the next launch. Upon encountering file corruption the cache can be trimmed up to the last-known-good entry to avoid any excessive loss of data from just one error.
By distributing the load of shader compiling onto multiple threads and then only waiting for completion until absolutely neccessary we can reduce compilation stutters significantly.
Introduces the base abstractions that will be used for pipeline caching, with a 'PipelineStateBundle' that can be (de)serialised to/from disk and an abstract accessor class to allow switching between creating disk-cached pipelines and fresh ones.
When caching pipelines we can't cache whole images, only their formats so refactor PackedPipelineState so that it can be used for pipeline creation, as opposed to passing in a list of attachments.
The problem is in StoreOpenContext wasn't storing any user, but ListOpenContextStoredUsers was writing default user (when it's not stored by StoreOpenContext)
Related service calls are called in a loop by SM3DW. A variable tracking zero drift mode has been added to `npad_device`, but it's unused at the moment.
This can reuse a fair bit of the now-commonised Maxwell 3D code and mostly consists of compute-specific pipeline code which was deemed not suitable for being commonised (e.g. descriptor update code is somewhat duplicated). Of note is how compute lacks any active state at all de to its use of QMDs which bundle up all state into a single object in memory.
A lot of pipeline code is difficult to commonise due to the inherent difference between compute and graphics pipelines, however the binding layout is shared so we can at least commonise that
This will be shared with the compute engine implementation, the only thing of note with this is that the binding register is now passed as a param since it is part of the compute QMD which can't be dirty tracked.
Although rtld and IPC prevent TLS/IO and code from being above the 36-bit AS limit, nothing depends the heap being below it. We can take advantage of this by stealing as much AS as possible for code in the lower 36-bits.
Exynos SoCs have a bug where the `CNTFRQ_EL0` register is either set to 0 or contain incoherent values. With this patch, the frequency value is loaded into a static variable and used instead of reading the register. The value will be initialised to the correct value for affected SoCs, while unaffected ones will use the value from the register.
* Close the input and output file streams before moving the output file to the final destination
* Clean up the destination path before moving the new file
* Introduce a `ImportResult` return value to differentiate between the possible causes of import errors
* Display more meaningful error messages in the UI
If a producer thread was waiting for the queue to have free space and the consumer thread hadn't yet acquired the production mutex a deadlock could occur
Capture HAT axes events ourselves instead of relying on the android framework to turn them into KeyCodes. Fixes handling of DPAD button presses on most controllers.
In the case of axis value being zero, polarity would favor one side of the stick resulting in invalid values. Fix that by taking into account axis history when calculating polarity.
This was incorrectly allocated in words, rather than bytes, meaning that guest allocations could overwrite the private memory and break inline syncpt operations
We need to use a shared_ptr to ensure that the present callback doesn't do any UAFs, also unlocks the GBP during presentation as if the queue is full a deadlock could a rise where the present callback wouldn't be able to run due to the (waiting) DequeueBuffer thread holding the lock.
Exiting from emulation has always been a big issue for Skyline, with guest and host threads that would keep running in the background unless the app was manually killed. Running emulation in a separate process allows us to kill it when we are done, avoiding the need for complex exiting management code.
The old message was being misinterpreted as if the device's gpu was not supported by the emulator. Reword that message to explicitly mention custom drivers.
* Add a drag indicator at the top
* Fix flex layout wrapping when buttons didn't fit on a single line
* Fix BottomSheetDialog peek height too small on landscape orientation
* General cleanup of the layout
A new `DragIndicatorView` had been introduced, which draws a small drag handle element. When used inside a `BottomSheetDialog`, this view will add a callback for hiding the indicator when the dialog is fully expanded.
Symbol hooking is required for HLE implementations of certain features in the future such as `nvdec` and for more in-depth debugging of games as we can inspect them on a SDK function level which allows us to debug issues far more easily.
The register wouldn't be cleared with a `MOVZ` when a value was zero due to the condition for writing an instruction requiring the `offsetValue` to be non-zero.
Since the register writes technically happen after the draw, issues can occur if they happen before: e.g. skyrim updates ctSelect and disables all RTs after a draw, but this would happen before it previously and crash the driver.
Vulkan doesn't allow sampling a texture and using it as an RT in the same RP, by tracking the texture usage status and splitting RPs when this occurs we can avoid such potential sync errors.
Previously, both I2M uploads and DMA copies would force GPU serialisation if they happened to hit a trap or were used to copy GPU dirty buffers. By using the buffer manager to implement them on the host GPU we can avoid such slowdowns entiely.
The lock release within the wait for submission means that another thread could end up signalling the cycle and then the VK wait still happen after when the lock has been reacquired.
Readback can be especially slow on mobile due to the varying load pattern it creates which often prevents the CPU/GPU from clocking up. Since some games perform texture readback but don't actually use it for anything significant implement a hack to skip it and significantly improve performance in such cases.
Due to the frequency at which is is called megabuffering performance is critical to the performance of the entire emulator, especially in high-drawcall-count scenarios. After the view redesign, megabuffering on a per-view level was no longer possible nor desirable, and thus megabuffering was modified to just copy for every usage of a view. This worked great at the time since there were other bottlenecks, however gpu-new has since removed almost all of them and megabuffering is now a major sore point. Fix this by megabuffering small chunks and storing them in a page-table like structure within the buffer, these chunks can be referenced by multiple views and will be smartly invalidated whenever the sequence number or execution number changes to avoid any sequencing issues. In addition to this, to help the case where almost the whole buffer is read every single frame across a set of multiple views, an optimisation to skip the chunked tracking and use one large single megabuffer allocation and one single memcpy has been introduced. This reduces the overall amount of time spent in memcpy since large memcpys are quicker.
Rather than using just bpb for format compat, additionally check that the exact component bit layout matches since many games end up reusing RTs for unrelated textures. The texture size requirements have also been weaked to only check the resulting layer size as opposed to width/height - this is somewhat hacky but it gets around the problem of blocklinear alignment.
Prevents situations where nothing would otherwise be waiting on the GPU and since presentation no longer blocks too many images would be submitted for presentation.
In some cases like presentation, it may be possible to avoid waiting on the CPU by using a semaphore to indicate GPU completion. Due to the binary nature of Vulkan semaphores this requires a fair bit of code as we need to ensure semaphores are always unsignalled before they are waited on and signalled again. This is achieved with a special kind of chained cycle that can be added even after guest GPFIFO processing for a given cycle, the main cycle's semaphore can be waited and then the cycle for the wait attached to the main cycle and it will be waited on before signalling.
TIC sizes may not be aligned to block linear dimensions whereas RT sizes are and then limited by the surface clip. By using this to determine surface size we are more likely to get a match in texture manager for any future usages.
