global settings under startup, it will only work with d2x v9 beta,
d2x v10 alt or hermes cIOS 5.0 or later, setting is saved in the
NAND save, so individual for every wii, wiiflow will reboot after
you change it
patches work with devo r188 too, also if you enable wifi gecko for
wiiflow this option will be set in devolution as well
-updated english.ini and german.ini
Note: The All Plugins source option has been removed and choosing either nand button on mutiple selection loads the nand you last used (real or emu)
The categories_v4.ini had to also be slightly modified to work with this. It will now contain a single 'GENERAL' section which contains the number of categories and the name of each. A suggestion, I would use the first 20 for bostonbc's genres and ratings and the next ten or so for movie types(mplayerce) and the next ten or so for misc.
When using more than one source the partition selection and emu nand settings in config are disabled for now.
The source button on the main screen still works the same including the d-pad option.
Most of the credit for this goes to Fix94 for setting wiiflow up for this a long time ago. I just took the 80% of work he'd already did and finished by getting it to work with the source menu. Note there may be some issues.
boot, as soon as you boot wiiflow again/return to wiiflow you will
return to this view once, if you boot wiiflow again then you will
be back in normal wii games view until you boot another game
(disabled by default), before it always was used and now its
only done if you select this option, if you disable this option
you can enable video patches and whatever and they finally work
set it to no then wiiflow will use the "path" directory in [NAND]
section to return to neek, if you set it to yes then wiiflow will
not set any path to return to neek
loading up wiiflow is much faster if you use force cIOS load,
you can actually delete, move, copy or whatever the save directly
from the system menu like a normal game save (may more things will
be done in the future this way)
-changed "About" to "Credits" (yea Abz that should be)
-slightly modified the IOS handling on wiiflow boot, the IOS
gets reloaded to prevent a not working patching system and if
the main IOS (default 249) is found wiiflow will reload into it
-in the startup settings, display AUTO instead of 0
-added some security wait before init/deinit ISFS
a cios and which cios you want to force load (0 means the default)
-hopefully fixed most network init problems when doing a ios reload
-updated english ini
-replaced the about button in coverflow with the wiiflow help
-added partition selection to the install game menu
-modified the pos of the go button (themers, update plz)
-new text for translators, "Install Game" in "home7"
-updated english and german ini
-fixed fanart usage
-fixed still selectable banner toggle if fanart is found
-added new setting to the wiiflow.ini, "dml_activity_led" (enabled
by default), in [DML] section, it controls the DML drive light
when the gamecube game is busy
-cleaned up some stuff
-added new option, "force_cios_rev" (default 0 (=disabled)), if you
set it to for example "force_cios_rev=250", then wiiflow will
use IOS250 for the AUTO setting, for reload when using
"force_cios_load" and when switching to emu nand in IOS58 mode
-added more detailed debug prints and on screen information about
the currently loaded cIOS
-minor cleanup in nand get file and external booter
-fixed gametdb memory management, now you can reload cache as
often as you want, read synopsis as often as you want without
wiiflow codedumping or freezing anymore after a few
- added custom missing covers support. Totally optional - without them wiiflow will display the usual blank question marks or theme related ones just like normal. Does not affect downloading covers or manually putting covers in wiiflow's cover folder. Wiiflow still checks for the cached cover first, then the box cover and flat cover, but before displaying the usual blank question mark ones wiiflow now looks for these custom missing covers.
Put your custom missing covers in your normal wiiflow boxcovers folder with all the other wii game covers. Rename them to the magicnumber.jpg and for non plugins - wii.jpg, channels.jpg, gamecube.jpg, and homebrew.jpg. You have to use jpg's when using this default method.
For theme related cover images still put them in your normal wiiflow boxcovers folder and rename them if necessary. I recommend adding the theme name and underscore as a prefix to the image name. Then add the following to your theme.ini modifying it to your liking. Note when using theme related cover images they can be png's.
[BLANK_COVERS]
wii=carbonik_wii.jpg
gamecube=carbonik_gamecube.jpg
channels=carbonik_channels.jpg
homebrew=carbonik_homebrew.jpg
53454741=carbonik_53454741.jpg
4D504345=carbonik_4D504345.jpg
534e4553=carbonik_534e4553.jpg
57493634=carbonik_57493634.jpg
56424158=carbonik_56424158.jpg
5343564D=carbonik_5343564D.jpg
at least something here to show we're not dead how some people asked :P
-sync with 4.0.3
-changed version number to Beta 4.0.4
-fixed bug that force_cios_load broke the wiimote pointer in wiiflow
-added support for wiiflow internal boot method in neek2o,
so you can use cheats, debugger etc if you boot channels in neek2o
(doesnt work if you are in real nand and just select boot neek)
- Fixed creation of the playlog
- Fixed and changed the way Wiiflow checks for neek2o (uneek2o r92 beta 12+ req)
- Fixed IOS reloading for Wii games in neek2o mode
- Added a small delay in booting a Wii game in neek2o mode
cheats, save emu, nsmbw + pop patch, wanin cios and hermes cios,
and return to wiiflow again (works here with d2x again)
-fixed some important stuff in wiiflow itself, less corruption
of the dol and more static stuff to get it back to stability
-set optimize level of booter from -Os to -O1
-added back name addition for gamecube game disc 2
-made gprintf, fmt and sfmt a bit more safe
-removed unneeded char for list check, just wastes memory
images
-changed list stuff a bit again, it'll take more mem now but
therefore it shouldnt slowdown when having alot of folders
@devs
-added crc32buffer, if you wanna know if the content is OK just
crc32 it :P
for the db files but its plugin magic to prevent double entries
because of same paths for alternative plugins
-removed some annoying debug prints yet again
all previous INIs cant boot any games until you add those lines:
For fceugx, genplusgx, wii64, snes9xgx, vbagx and wiimednafen add:
"arguments={device}:/{path}|{name}|{loader}"
For mplayerce and not64 (havent tested yet) add:
"arguments={device}:/{path}/{name}"
And for scummvm add:
"arguments={name}"
You can also remove the "ReturnLoader" line from the INIs.
Any magicword for scummvm and mplayerce is accepted now, just
make sure in scummvm the "romdir" is still "scummvm.ini".
-added new option to wiiflow.ini [GENERAL] section,
"display_music_info" (enabled by default), if you disable it the
information on top of the screen if music got changed will be hidden
-recompiled mload modules for hermes cIOS
-added sdhc module for hermes cIOS
-fixed booting wii games from sd card
-improved wii game support via sd card, now you can use hermes, wanin
and d2x (not d2x only anymore)
-moved some more stuff to boot wii games into the external booter
-added gecko debug prints to external booter
-automatically disabling savegame emulator if you want to boot a wii
game via hermes or waninkoko cIOS
-set down wiiflows entry point from 0x80A00000 to 0x8062000
(saves ALOT of MEM1 for lists etc, so wiiflow should be able to read
in alot of more games in for example plugin coverflow)
-recompiled libjpeg
-removed alot of annoying debug prints
-made the trailer code faster
dpad
-fixed a bug when pointer gets on screen and some option is selected
via dpad and pointer gets off screen again that the dpad setting was
completely fucked up
-only enable scrolling through settings with dpad if no pointer is
on the screen (to not confuse wiiflow)
-alternative way of booting game with pressing A and pointer not
on screen (for some people the current way didnt work properly)
- replacing strings of 0's and 1's with ASCII characters 33 on up. So if you have a game in category 1 and you have 20 categories, instead of 110000000000000000000 all you will see is ! (ASCII character 33) which is way shorter and will take wiiflow much less time to read. Also if a game isn't in any category there will be nothing after the = .
- also added categories for individual plugins. Wiiflow checks to see if only one plugin is selected and if so then uses the categories for that one plugin. So for example you can have categories for your movies when you only use the mplayerce plugin.
-Fixed favorites_on_startup. renamed it save_favorites_mode. defaults to off. set to yes and wiiflow will remember if favorites was on or off for each view/mode. Still can be set on page 4 of config menu.
-Fixed favorites and parental lock for plugins. Parental lock might come in handy for movies.
-And restored save for categories_v4.ini on exit of wiiflow
- Fixed Nand Emulation from SD-card.
- Fixed "CheckSave" functions.
- Fixed feature to flash a save file from emulated NAND back to real NAND.
- Some minor code cleanups and bug fixes.
neek2o: (neek2o r93+ only)
- Fixed return to channel function for titles on emulated NAND
- Added an option in wiiflow.ini: launchwiiflow in "NEEK2O" domain
If this option is set to "no" the "exit to" option in home menu
will launch neek2o SM instead of the "DWFA" channel.
- If the return to channel option is set.. neek2o will return to
that specific title if that title exists on the emulated nand, even
if the title was launched from real NAND.
- now you can have as many categories as you want.
- copied the idea of selected, hidden, and required categories from USB Loader GX. Thanks Cyan. Checkmark = selected, X = Hidden, and + = Required.
- redid categories.ini layout and renamed it categories_v4.ini so you can copy and paste settings from the old one to the new one. Each view (USB,DML,EMU,NAND,HOMEBREW) has it's own numcategories, category names, and category settings. All games are now seperated based on the view. Don't forget to add 1 to numcategories for the show All mode.
- Replaced All checkbox with CLEAR button which clears all checkboxes so no category is selected and all games will be shown.
- Added features to the Game Selected Categories Menu. Now the title is the title of the current game. You can now press plus(+) and minus(-) on wiimote to go to the next or previous games without going back to previous screen making it easier to setup categories for your games.
- note: all changes will not be saved in categories_v4.ini unless you exit wiiflow or launch a game.
-fixed banner was not automatically hiding in gametdb, delete game question, copy game from usb to sd question, trailer and favourites settings
-cleaned up some stuff again
-fixed installing gamecube disc 2 with wiiflow installer
-fixed exit to neek2o for people who got their nand in a folder
-some general cleanup and speedup
enabled wiiflow will always reload to the cIOS even if a normal
IOS with AHBPROT is found (disabled by default)
-enabled skip_list_check by default
-cleaned up a bit
-if a IOS is found which got the AHBPROT patched out, wiiflow will
run on it (for example if you boot wiiflow via HBC, it will boot
with IOS58 instead of 249)
-on game boot or on entering emu nand, wiiflow automatically reloads
IOS if necessary
-added check to only reload IOS if its really a different one
-removed SD card gecko log buffer allocation, using some
buffer in dol directly (should allow longer logging, untested)
-set wiiflow optimize level back to -O2
it wiiflow will not check for new games on boot, that will speed up
bootup amazingly for people with alot of wii games (disabled by def)
-disabled extended list check by default
possible to always have full NAND access no matter which IOS is
loaded currently
-fixed the sometimes again flashing wait message on game boot
-added some proper ISFS init and deinit methods with debug prints
the problem of the lagging wait message (since the wait message
doesnt take much wii power wiiflows speed should be the same)
-set down wait message stack and also removed the reallocation of
the stack again and again on every display of it
-added security check that the wait message thread is finished
before removing the thread (should prevent freezes)
-removed a few more unneeded lines of code
-WIP commit for wii game/channel booting, now uses a internal
extra dol file to boot wii games and channels, that should be a
better way to fix game and channel booting
currently loaded cIOS instead
-fixed bug of missing remount if no games are found with enabled
NAND emulation which made wiiflow hang
-added information for neek2o
-removed ios reload on boot when wiiflow is in neek2o mode
-made NAND file extraction MEM2 only
-fixed two not free'd memory allocations which could fill the
memory with unused stuff
problems or blackscreens (test it please)
-changed play button in full screen banner back to the right side
(jiiwah, why you changed that? It's right in the system menu)
-now source menu looks for images in current theme folder first, then source_menu folder. All images must be named the same as what's in the source_menu.ini. If not found in either folder uses wiiflow's favorite star image.
-removed source menu exit button.
-moved a few debug prints, also added disc id check for wii games
playing from a wbfs partition (before it just checked on fat32,
ntfs and ext2 if the readed in disc is correctly opened from cIOS)
-made ogg lib using MEM2 only (as we did in the previous update
with the sound buffers)
to be divisible with 4 anymore, you can use what you want
-moved sound buffers back in mem2, idk but for wiiflow it gives
a better result
-added mem2 memalign placeholder for new memory manager (after
a week still everything but finished)
-updated other small things, cleaned up source structure a bit
-devolution will now return to wiiflow using the hidden channel
-added megazig to thanks list
-allocating memory for devolution instead of using a fixed position
(seems to work just fine now)
which has enough space left instead of fixed memory in most parts
-fixed alot of things about banner playing, now shouldnt randomly
codedump anymore or things like this, also some banner sounds
which did not play before should work fine now
-removed unused code and added better debug prints
-using some fixed voice for game banner and not always a new one
per banner
-fixed DIOS-MIOS cheats for sure now :P
-fixed possible memory allocation bug in wbfs alloc (thanks to
cfg-loader)
-removed MEM2_memalign since it did not work correctly
-fixed a few wrong memset sizes
-made wait animation faster
-removed a few unneeded lines in the wait message code
-fixed booting wii games from disc
-fixed possible bug in wii game launching in general
-gecko output again on wii game booting
-converted alot of spaces to tabs, fitting the general wiiflow
coding style
-general cleaning up things
is found, it will just replace the filename extension with .jpg
and try it again, the jpg file width and height need to be
divisable with 4, otherwise wiiflow will just ignore the cover
- If a 2 disc GC game is launched with Devolution, tell Devolution the location of the 2nd disc*
* Use Wiiflow's game installer to backup your GC game
- Made check for Devolution more safe
- Added some neek2o magic (neek2o r90+ required*):
* Added an exit option to neek2o
* Added an option in gameconfig menu to launch vc/ww titles from wiiflow nand emulation in neek2o instead of cIOS
-added BASIC jpg support (currently only for internal theme files
and only with the power of 4 dimension images)
-using dvdskin files in jpg format (you wont notice the diff)
-created new folder in resources for the original theme pngs
(@devs: if you update pictures and use jpg, place the original png
inside that folder that we have the original one just in case)
-added debug SD information if found or not and if in __io_wiisd
mode (for dolphin-emu, neek, hermes ios)
-added automatically test if __io_wiisd mode works (no need to
overwrite things anymore to test that)
-added more intelligent IOS check (stub check, version check)
-removed unneeded cIOS information in neek mode
fucked up cIOS maps
-changed the AUTO IOS selection again, if the game doesnt need
IOS57 it will just use the currently loaded cIOS instead of a
IOS56 based one
enabled by default, with the option enabled it will use cfg version
2 for dm 2.1 or higher, if disabled it uses cfg version 1. It will
be ignored if dml_r52+ is set to no since that uses the old boot.bin
method then
the memory we use for them, not that we get problems
-added debug prints about how much mem left before and after
cleanup
-updated devicehandler, partition handler and usb code to the
latest usb loader gx one, should give more compatility and
port 1 support (not enabled yet)
if we boot homebrew and devolution
-fixed stupid bug which may made a problem with devolution (thanks
stfour for finding it)
-dont init mload on waninkokos cIOS which is older than r18
game via DIOS-MIOS or Devolution, if you set it to Default it
will boot ISOs via Devolution and FST extracted via DIOS-MIOS
-updated english.ini
-updated german.ini
display gamecube coverflow button still
-added possibility to set diosmios video patching way,
video_setting in wiiflow.ini [DML] section, if set to 0
it will disable all video settings of diosmios, if set to 1
it will use the auto setting (default) and if set to 2 it
will force the video mode
and place the loader.bin into your wiiflow data folder, wiiflow
will automatically find the binary and use devolution to boot
the gamecube game (only works with iso files, games extracted
with gcreex doesnt work)
and set both a bit down
-changed a few little things about freetypegx unload
-since I dont care about size anymore the libs are now
in its original size again, makes wiiflow bigger but better
to handle
-changed some small things about the menu class opening
-forgot to deinit ISFS on sys exit, may it created some problems
-closing wiimote inputs before reloading IOS
* Now if you click B on ExitTo menu it will go back to Home menu and not coverflow
* If parental lock is on, ExitTo will just exit and not show ExitTo menu anymore
* Now with home in ExitTo you can exit too
* Added/Deleted some sentences
* Updated english and italian translation
means we can properly see if cached or custom banner is loaded
-corrected bug which didnt copy back the banner md5 before writing
banner cache, means all cached banners dont have the security check
anymore
which either got the ID3 or the ID6 as name into wiiflow/banners
-removed security check for banners since some custom banners are
poorly made and not 100% valid
-on game switching just display blackscreen instead of the old
banner in the time of switching
progress, thanks alot to dimok and the whole usb loader gx team
for help and the code for it!
To zoom the banner to fullscreen click the back button, to zoom out
the back button again, known bugs:
-some games fuck up the textures of buttons (e.g. wii play motion)
-if no wii game or channel was selected and you try to launch a game
or exit wiiflow it will most likely codedump
what they do ;)
-fixed bug of game crashing when selecting progressive
as video mode (issue 94)
-updated german.ini
-updated english.ini
-updated theme default.ini
note: if you have the problem of overlapping options, then
its most likely a outdated default.ini, try updating to this
one and see if the problem is fixed
added Miigotu's game info synopsis and about fix.
added Miigotu's multichoice buttons fix - now button font size can be different than label font size.
changed game info genre to display the whole genre.
changed theme choice button to not display in uppercase.
currently you can access the settings from it, see the about screen,
update wiiflow, reload cache and exit wiiflow (to exit wiiflow you
can also just press home/start button again in this menu)
-removed reload cache with b button on settings icon
-removed update button from about menu
-updated english help file and english.ini
-updated german.ini
-help file size can now be as long as you want to, it will be
allocated dynamically now
-only create folders if they doesnt exist, otherwise it spams
our debug messages :P
-updated danish.ini and added danish help file (thanks nibb)
