A data structure that can represent the same value for a range of addresses (pages) is required for fast lookup in certain cases. This commit implements a near optimal data structure for mass insertion and O(1) lookup of range-based data, this is achieved using the host MMU and implementing multiple levels of atomicity for the ranges.
It should be noted that the table is limited to two levels but can be extended to a variable amount of ranges in the future, it was determined that additional levels of ranges can be beneficial for performance depending on the specific use-case.
Adreno drivers have certain errata which leads to Vulkan Push Descriptors to be broken on them in certain cases which leads to a descriptor set update being swallowed. This has been worked around by disabling push descriptors on Adreno drivers, this may lead to reduced performance on certain titles which frequently bind new descriptors.
Any semaphore releases are implicit synchronization events that can be utilized by the guest to pick up that the GPU has executed till a certain point and therefore we must submit all prior work accordingly.
DMA copies utilized `SubmitWithFlush` instead of `Submit`, this is not required and incurs significant additional synchronization penalties which will no longer be required.
We want to avoid blocking on surface creation unless necessary, this commit doesn't wait on the creation of the surface as it default initializes the value which'll generally be `Identity` or the transformation of the previous surface if it was lost.
Co-authored-by: Billy Laws <blaws05@gmail.com>
The V-Sync `KEvent` would be used by the presentation thread prior to construction leading to dereferencing an invalid value, this has been fixed by changing the order of construction to move the construction of the presentation thread after the V-Sync event.
The `TrapRegions` function performed a page-out on any regions that were trapped as read-only, this wasn't optimal as it would tie them both into the same operation while Buffers/Textures require to protect then synchronize and page-out. The trap was being moved to after the synchronize to get around this limitation but that can cause a potential race due to certain writes being done after the synchronization but prior to the trap which would be lost. This commit fixes these issues by splitting paging out into `PageOutRegions` which can be called after `TrapRegions` by any API users.
Co-authored-by: Billy Laws <blaws05@gmail.com>
`NCE::TrapRegions` was a bit too overloaded as a method as it implicitly trapped which was unnecessary in all current usage cases, this has now been made more explicit by consolidating the functionality into `NCE::CreateTrap` which handles just creation of the trap and nothing past that, `RetrapRegions` has been renamed to `TrapRegions` and handles all trapping now.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Similar to `Buffer`s, `Texture`s suffered from unoptimal behavior due to using atomics for `DirtyState` and had certain bugs with replacement of the variable at times where it shouldn't be possible which have now been fixed by moving to using a mutex instead of atomics. This commit also updates the API to more closely match what is expected of it now and removes any functions that weren't utilized such as `SynchronizeGuestWithBuffer`.
Having a single variable denoting the exact state of a buffer and the operations that could be performed on it was found to be too restrictive, it's now been expanded into an additional `BackingImmutability` variable but due to these two. We can no longer use atomics without significant additional complexity so all accesses to the state are now mediated through `stateMutex`, a mutex specifically designed for tracking the state.
While designing the system around `stateMutex` it was determined to be more efficient than atomics as it would enforce blocking far less than it would generally have been compared to if the regular atomic fallback of locking the main resource lock which is locked for significantly longer generally.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
As a performance sensitive part of code, the NCE Trapping API benefits from having tracing and it helps us better determine where guest code is spending its time for more targeted optimizations.
The lifetime of the `this` pointer in the trap callbacks could be invalid as the lifetime of the underlying `Buffer`/`Texture` object wasn't guaranteed, this commit fixes that by passing a `weak_ptr` of the objects into the callbacks which is locked during the callbacks and ensures that a destroyed object isn't accessed.
Co-authored-by: Billy Laws <blaws05@gmail.com>
The `CommandExecutor`'s `MegaBuffer` was not being updated with the latest `FenceCycle` on being flushed in `SubmitWIthFlush`, this led to the megabuffer being overwritten prior to its GPU-side usage being complete. This commit fixes that by replacing the cycle to the latest cycle and prevents any races that occurred prior.
`FindOrCreate` ended up being monolithic function with poor readability, this commit addresses those concerns by refactoring the function to split it up into multiple member functions of `BufferManager`, while some of these member functions may only have a single call-site they are important to logically categorize tasks into individual functions. The end result is far neater logic which is far more readable and slightly better optimized by virtue of being abstracted better.
In certain cases the move constructor may not suffice and the move assignment operator is required, this commit implements that and moves to using a pointer for storing the `resource` member rather than a reference as its semantics matched what we desired more and allowed for assignment of the `resource`.
It was determined that `FindOrCreate` has several issues which this commit fixes:
* It wouldn't correctly handle locking of the newly created `Buffer` as the constructor would setup traps prior to being able to lock it which could lead to UB
* It wouldn't propagate the `usedByContext`/`everHadInlineUpdate` flags correctly
* It wouldn't correctly set the `dirtyState` of the buffer according to that of its source buffers
The condition for `setDirty` in the dirty state CAS was inverted from what it should've been resulting in synchronizing incorrectly, this commit fixes the condition to correct synchronization.
The formats of the textures involved in a texture were checked for equality, this broke certain copies as the presentation engine would invoke copies between textures of different yet compatible formats.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
`ContextLock` had unoptimal semantics in the form of direct access to the `isFirst` member which wasn't clearly defined, it's now been broken up into function calls `IsFirstUsage` and `OwnsLock` with explicit move semantics and a function for releasing the lock.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
The position at which we call submit is a significant factor in performance and we did so at the end of PBs (PushBuffers), this isn't optimal as there could be multiple PBs queued up that would benefit from being in the same submission. We now delay the submission of the workload till we run out of PBs.
A buffer that's attached to a context could be coalesced into a larger buffer which isn't attached, this would break as it wouldn't keep the buffer alive till the end of the associated context. To fix this if any source buffers are attached then the resulting coalesced buffer is also attached now.
The CAS condition for KThread PI was inverted which lead to entirely incorrect behavior for CAS conditions which while it might work in the vast majority of cases would lead to significantly inaccurate behavior.
The lock callback would `continue` which would end up skipping over the current item as it applied to the inner loop rather than the outer loop as intended. This has now been fixed by using `break` and a check instead.
The buffer's non-blocking behavior could lead to an invalid state where the dirty state doesn't adequately represent the buffer's true state, the check has now been moved inside the CAS loop as its behavior changes depending on the dirty state. In addition, `SynchronizeGuest` returns a boolean denoting if the synchronization was successful now to make code flows depending on non-blocking synchronization cleaner.
`SynchronizeGuest` could only set the dirty state to `Clean` which was redundant since calls to it from inside the write trap handler would set it to `CpuDirty` directly after, this fixes that by doing it inside the function when necessary.
The trap callbacks did not wait on the `Texture` to complete synchronization to the guest, this resulted in races where the contents written to the texture would be overwritten by the synced content. This commit fixes that by waiting on the fences at the end of the trap callback.
The lifetime of `TextureView` objects wasn't correctly managed as they weren't being attached the the `FenceCycle` in `AttachTexture`, this led to them getting deleted and causing all sorts of UB.
The flush callbacks inside `CommandExecutor` weren't being called prior to submission as they should've been, this fixes that by calling them. It additionally removes the requirement to manually flush Maxwell3D at the end of `ChannelGpfifo` pushbuffers as it's a flush callback and will automatically be called by `Submit`.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Any work that was done in a `ChannelGpfifo` pushbuffer needs to be submitted at the end of it, if it isn't done then the work might incorrectly be not done till the next submission. This commit fixes it by calling `CommandExecutor::Submit` at the end of a pushbuffer, submitting any buffers that would've been left over.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Certain submissions might not utilize megabuffering but reserve a `MegaBuffer` regardless, this is not optimal since it can inflate the allocations and waste memory. This commit addresses the issue by eliding the allocation given the current submission doesn't utilize them.
If a `FenceCycle` isn't attached then `PollFence` returned `false` while it should return if the buffer has any concurrent GPU usages in flight, this has now been fixed by returning `true` in those cases.
Certain resources can be attached to an empty `Submit` with no nodes, this can cause it to become a false dependency and not be removed till the next non-empty submission. This has now been fixed by doing a reset regardless of if any nodes exist.
The GPU inline copy callback was broken for `Buffer::Write` as it wasn't always called when it needed to be and didn't handle attaching of the buffer to the executor which would cause it to be unlocked. This commit addresses both of these issues, it introduces a `AttachLockedBuffer` method to attach an already locked buffer to the executor.
The FPS is implicitly bound to the refresh rate due to the timestamp being that of the presentation time, this leads to a misleading FPS figure for disabled frame throttling. It has now been fixed by using the frame submission time rather than the presentation time when frame throttling is disabled and to make this more apparent the color of the OSD FPS has been changed.
All `Packed` formats have their components stored in the opposite ordering to the label, this was not followed for `IsAdrenoAliasCompatible` prior and the ordering has now been flipped.
A deadlock was caused by holding `trapMutex` while waiting on the lock of a resource inside a callback while another thread holding the resource's mutex waits on `trapMutex`. This has been fixed by no longer allowing blocking locks inside the callbacks and introducing a separate callback for locking the resource which is done after unlocking the `trapMutex` which can then be locked by any contending threads.
The `end` pointer for `interval` was incorrectly calculated as `interval.data() + interval.size_bytes()` which would be incorrect when the interval span type is not `u8` as the pointer derived from `interval.data()` would be a pointer to the span type rather than a byte pointer and be subject to arithmetic of that object's size rather than in terms of a byte.
We generally don't need to lock the `Texture`/`Buffer` in the trap handler, this is particularly problematic now as we hold the lock for the duration of a submission of any workloads. This leads to a large amount of contention for the lock and stalling in the signal handler when the resource may be `Clean` and can simply be switched over to `CpuDirty` without locking and utilizing atomics which is what this commit addresses.
We utilized a `FenceCycle` to keep track of if the buffer was mutable or not and introduced another cycle to track GPU-side requirements only on fulfillment of which could the buffer be utilized on the host but due to the recent change in the behavior this system ended up being unoptimal.
This commit replaces the cycle with a boolean tracking if there are any usages of the resource on the GPU within the current context that may prevent it from being mutated on the CPU. The fence of the context is simply attached to the buffer based off this which was allowed as the new behavior of buffer fences matches all the requirements for this.
An atomic transactional loop was performed on the backing `std::shared_ptr` inside `BufferView`/`TextureView`'s `lock`/`LockWithTag`/`try_lock` functions, these locks utilized `std::atomic_load` for atomically loading the value from the `shared_ptr` recursively till it was the same value pre/post-locking.
This commit abstracts the locking functionality of `TextureView`/`BufferDelegate` into `LockableSharedPtr` to avoid code duplication and removes the usage of `std::atomic_load` in either case as it is not necessary due to the implicit memory barrier provided by locking a mutex.
`PresentationEngine` and `GraphicBufferProducer` methods that utilized textures for the surface utilized the `Texture` type rather than the `TextureView` type, this was never correct but at the time of authoring this code `TextureView` was not finalized and in a major flux which is why it was not utilized and `Texture` was utilized instead. Now that is is far more stable, it has been replaced with `TextureView`.
We want to block on the host thread during presentation while the host surface isn't present to implicitly pause the game, this can end up being fairly costly as it involves locking the `PresentationEngine` mutex which can lead to a lot of contention with the presentation thread. This fixes the issue by polling if there is a surface and only if there isn't then doing the wait as it isn't mandatory to wait always, we'll eventually run into the guest thread stalling.
Newer versions of the Deko3D homebrew were crashing due to this check and it was discovered that the check was incorrect and rather than comparing the `NvSurface` what had to be compared was the `GraphicBuffer` associated with the slot directly.
Co-authored-by: lynxnb <niccolo.betto@gmail.com>
The copyright headers for external project such as yuzu/Ryujinx were inconsistent in ordering, Skyline should always be the first item in the list. In addition, they didn't always link to the project's GitHub which has also been fixed.
Multiple threads concurrently accessing the `TextureManager`/`BufferManager` (Referred to as "resource managers") has a potential deadlock with a resource being locked while acquiring the resource manager lock while the thread owning it tries to acquire a lock on the resource resulting in a deadlock.
This has been fixed with locking of resource manager now being externally handled which ensures it can be locked prior to locking any resources, `CommandExecutor` provides accessors for retrieving the resource manager which automatically handles locking aside doing so on attachment of resources.
GPU resources have been designed with locking by fences in mind, fences were treated as implicit locks on a GPU, design paradigms such as `GraphicsContext` simply unlocking the texture mutex after attaching it which would set the fence cycle were considered fine prior but are unoptimal as it enforces that a `FenceCycle` effectively ensures exclusivity. This conflates the function of a mutex which is mutual exclusion and that of the fence which is to track GPU-side completion and led to tying if it was acceptable to use a GPU resource to GPU completion rather than simply if it was not currently being used by the CPU which is the function of the mutex.
This rework fixes this with the groundwork that has been laid with previous commits, as `Context` semantics are utilized to move back to using mutexes for locking of resources and tracking the usage on the GPU in a cleaner way rather than arbitrary fence comparisons. This also leads to cleaning up a lot of methods that involved usage of fences that no longer require it and therefore can be entirely removed, further cleaning up the codebase. It also opens the door for future improvements such as the removal of `hostImmutableCycle` and replacing them with better solutions, the implementation of which is broken at the moment regardless.
While moving to `Context`-based locking the question of multiple GPU workloads being in-flight while using overlapping resources came up which brought a fundamental limitation of `FenceCycle` to light which was that only one resource could be concurrently attached to a cycle and it could not adequately represent multi-cycle dependencies. `FenceCycle` chaining was designed to fix this inadequacy and allows for several different GPU workloads to be in-flight concurrently while utilizing the same resources as long as they can ensure GPU-GPU synchronization.
If we want to allow submitting multiple pieces of work to the GPU at once while still requiring CPU synchronization, we'll need to track all past fence cycles associated with a resource alongside the current one. To solve this the concept of chaining fences has been introduced, fences from past usages can be chained to the latest fence which'll then recursively forward operations to chained fences.
This change also ends up mandating a move away from `FenceCycleDependency` as it would prevent fences from concurrently locking the same resources which is required for chaining to work as two fences being chained fundamentally means they're locking the same resources. The `AtomicForwardList` is therefore used as the new container.
An implementation of a singly-linked list with atomic access to allow for lock-free access semantics, it eliminates the requirement for a mutex which can introduce additional consideration for synchronization.
Resources on the GPU can be fairly convoluted and involve overlaps which can lead to the same GPU resources being utilized with different views, we previously utilized fences to lock resources to prevent concurrent access but this was overly harsh as it would block usage of resources till GPU completion of the commands associated with a resource.
Fences have now been replaced with locks but locks run into the issue of being per-view and therefore to add a common object for tracking usage the concept of "tags" was introduced to track a single context so locks can be skipped if they're from the same context. This is important to prevent a deadlock when locking a resource which has been already locked from the current context with a different view.
We do not want to allow saving of user data on unsigned builds as they don't have a stable signature and will not properly handle reinstallation. This can lead to a situation where the user has to resort to complex techniques to completely uninstall the package such as ADB or calling into PM directly.
We currently present all frames synchronously on the thread that calls into SurfaceFlinger functions, this is unoptimal as it doesn't match guest behavior which can lead to delaying the guest from working on the next frame. This commit queuing up frames to non-blocking and handles all waiting then presenting the frame on a dedicated thread.
We utilize `pthread_setname_np` to set the thread names but didn't check for any errors which resulted in the `Skyline-Choreographer` and `ChannelCmdFifo` not having proper names as they exceeded the 16 character limit on thread names for the pthread function. This has now been fixed by changing the names and introducing error checking to invocations of this function.
All our normal alignment functions are designed to only handle power of 2 (`POT`) multiples as we only align or check alignment to `POT` multiples but there are cases where this is not possible and we deal with `NPOT` multiples which is why this function is required.
We waited on the host GPU after `Execute` but this isn't optimal as it causes a major stall on the CPU which can lead to several adverse effects such as downclocking by the governor and losing the opportunity to work in parallel with the GPU.
This has now been fixed by splitting `Execute`'s functionality into two functions: `Submit` and `SubmitWithFlush` which both execute all nodes and submit the resulting command buffer to the GPU but flushing will wait on the GPU to complete while the non-flush variant will not wait and work ahead of the GPU.
We need move-assignment semantics to viably utilize these objects as class members, they cannot be replaced without move-assign (or copy-assign but that is undesirable here). This commit fixes that by introducing a move assignment operator to them while making the `slot` a pointer which has the necessary nullability semantics.
This change lets items get the updated position of their view holder in the adapter. Fixes an issue where the position of items was not updated after being removed from a `SelectableGenericAdapter`.
This preference launches `GpuDriverActivity` for managing custom gpu drivers. When the device has an incompatible GPU, the preference will be disabled and greyed out.
The activity adds the following functionalities:
* Lists installed drivers
* Allows the user to install new drivers, or remove installed ones
* Allows the user to select the driver that will be used by the emulator
At some point we will call Submit within draws or constant buffer updates, to avoid any infinite recursion mark draw/cbuf pending as false before performing any operation
The previous name was chosen as an afterthought and didn't clearly indicate what the purpose of the class is. We needed a separate, simple class without delegates members (like PreferenceSettings), so that its fields can be easily accessed via JNI to get settings values from native code.
The `Settings` class now has a pure virtual `Update` method, and uses inheritance over template specialization for platform-specific behavior override.
A `Setting` delegate class has been introduced, holding the raw value of the setting and adding support for registering callbacks to that setting. Callbacks will then be called when the value of that setting changes.
As a result of this, raw setting values have been made accessible through pointer dereference semantics.
SharedPreferences will be partially swapped out in the future to support per-game settings. In the meantime, make it clear from which class settings are coming from.
Settings are now shared to the native side by passing an instance of the Kotlin's `Settings` class. This way the C++ `Settings` class doesn't need to parse the SharedPreferences xml anymore.
Mali GPU drivers utilize the `ppoll()` syscall inside `waitForFences` which isn't correctly restarted after a signal, which we can receive at any time on a guest thread. This commit fixes that by recursively calling the function on failure till it succeeds or returns an unexpected error.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
Co-authored-by: Billy Laws <blaws05@gmail.com>
These applets are used by applications to display a custom error message to the user. Both the error message and the detailed error message are printed to the error log.
Co-authored-by: lynxnb <niccolo.betto@gmail.com>
This conforms to the C++ 'Allocator' named requirement allowing it to be used with any STL type and allows drastically reducing allocation times in cases which are suited for linear allocation.
Certain non-indexed quad draws would mistakenly take the indexed quad path because of the assumption that they would not have a bound index buffer. This resulted in a crash for most games using quads due to a faulty exception `Indexed quad conversion is not supported`, when in fact they were not using indexed quads.
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
Co-authored-by: Billy Laws <blaws05@gmail.com>
This commit implements several key optimisations in megabuffering that are all inherently interlinked.
- Megabuffering is moved from per-buffer to per-view copies, this makes megabuffering possible for small views into larger underlying buffers which is often the case with even the simplest of games,
- Megabuffering is no longer the default option, it is only enabled for buffer views that have had inline GPU writes applied to them in the past as that is the only case where they are beneficial. In any other case the cost of copying, even with a 128KiB limit can be significant.
- With both of these changes, there is now possibility for overlapping views where one uses megabuffering and one does not. In order to allow GPU inline writes to work consistently in such cases a system of 'host immutability' has been implemented, when a buffer is marked as host immutable for a given cycle, all writes to the buffer from that point to the point the cycle is signalled will be performed on the GPU, ensuring that the backing contents are correctly sequenced
Has the same guarantees of pointer stabilty while also being significantly faster in cases where a buffer has thousands of views. This is the case in RE4 and this change leads to an almost 1000% performance improvement in that game.
Uses an API found through RE since none of the AOSP APIs work, additionaly the code for setting RR was consolidated to a single function that can be ran after all display updates.
We currently have a global `MegaBuffer` instance that is shared across all channels, this is very problematic as `MegaBuffer` fundamentally works like a state machine with allocations (especially resetting/freeing) and is thread-specific. Therefore, we now have a pool of several `MegaBuffer`s which is allocated from by the `CommandExecutor` and kept channel specific as a result which also limits its usage to a single thread, this allows for individually resetting or freeing any allocations.
There was a lot of redundant code in the `CommandScheduler` when the same functionality could be achieved with much shorter and cleaner code which this commit fixes. This includes no changes to the user-facing API and does not require any changes on the user side as a result.
Some games remap rendertargets or map them late which would lead to weird graphical bugs or crashes. Drop the caching since VMM lookup is fairly cheap anyway.
The `VkBufferImageCopy` offset calculations were wrong inside `CopyIntoStagingBuffer` as it multiplied the mip level's linear size by `levelCount` rather than `layerCount`. This led to substantial UB in games which called this function as it led to an overflow and resulted in writing to other areas of the buffer which caused major issues such as vertex/index buffer corruption and corresponding graphical glitches alongside likely being the cause of some crashes.
BC7 CPU decoding had the red and blue channels swapped around as it outputted a BGRA image after decoding while we expected an RGBA image to be produced. This should fix the colors of certain textures in titles such as Cuphead or Sonic Forces.
The syncpoint maximum value represents the maximum possible syncpt value at a given time, however due to PBs being submitted before max was incremented, for a brief moment of time this is not the case which could lead to crashes or other such behaviour if a game waits on the fence at the right moment.
We used a `FileProvider` for log sharing prior, this is no longer necessary since it comes under the `DocumentsProvider` now which can be utilized to share the log document directly.
Any documents with the same name existing in a directory that is copied to would cause an exception due to existing already, this fixes that by handling conflict resolution in those cases and automatically determining a file name that would avoid a conflict.
Previously a broken state value was returned from GetState that caused crashes in games using newer SDKs and NFP, correctly handle state now by updating it after initialisation.
We can't render to a 3D texture through a 3D view, we instead have to create a 2D array view into it and render to that. The texture manager previously didn't support having a different view type/layer count between a guest texture view and the underlying storage texture that is required to support this so that was also implemented by reading the view layer count from the dimensions depth instead if the underlying texture is 3D (and the view type is 2D array). Additionally move away from our own view type enum to Vulkan, inline with other guest texture member types.
Sampler anisotropy was made a required feature in an earlier commit due to its widespread availability but this was determined to be incorrect as certain Mali GPUs that can otherwise run 2D games in Skyline do not have this feature, while they are still not officially supported as this was the only roadblock to support them, it has now been made an optional feature.
`android:hasFragileUserData` was added in an earlier commit but then removed due to it not functioning because of signature checks. Now that signatures are consistent across builds, it has been readded and should now allow carrying data across CI and developer builds.
With the Skyline document provider, easy access to the internal directory is required which may be hard to navigate to through the system file manager. This adds an option in settings to directly open up the directory in the system file manager.
The URIs (Document ID + Root) of the Skyline `DocumentsProvider` was unoptimal as it wasn't relative to a base directory. This is required for opening a root without knowledge of the full path in advance, it is therefore cleaner to provide a uniform `ROOT_ID` in a companion class.
On Android 12 and above, files from an application's external storage directory cannot be accessed by the user. The only proper SAF-compliant way to solve this is to create a `DocumentProvider` which proxies access to internal storage accordingly.
Certain GPU vendors such as ARM's Mali do not have support for BCn textures whatsoever while other vendors such as AMD only have partial support (BC1-BC3). Most titles on the guest utilize BC textures and to address this on host GPUs without support for BCn, we need to decompress the texture on the CPU. This commit implements a CPU BCn texture decoder based off Swiftshader's BC decoder, it also adds the necessary infrastructure to have different formats for the `GuestTexture` and `Texture` objects.
The iterations of the inner loop for sector deswizzling was miscalculated as `SectorWidth * SectorHeight` while the result was correct at `32`, it should be determined by the amount of sector lines within a GOB i.e.: `(GobWidth / SectorWidth) * GobHeight`.
Support for mipmapped textures was not implemented which is fairly crucial to proper rendering of games as the only level that would load is the first level (highest resolution), that might result in a lot more memory bandwidth being utilized. Mipmapping also has associated benefits regarding aliasing as it has a minor anti-aliasing effect on distant textures.
This commit entirely implements mipmapping support but it does not extend to full support for views into specific mipmap levels due to the texture manager implemention being incomplete.
Maxwell DMA requires swizzled copies to/from textures and earlier it had to construct an arbitrary `GuestTexture` to do so but with the introduction of the cleaner API, this has become redundant which this commit cleans up and replaces with direct calls to the API with all the necessary values.
The API for texture swizzling is now more concrete and abstracted out from `GuestTexture`, this allows for neater usage in certain areas such as MaxwellDMA while having a `GuestTexture` wrapper as well allowing for neater usage in those cases.
The code itself has also been cleaned up slightly with all usage of `u32`s being upgraded to `size_t` as this is simply more efficient due to the compiler not needing to emulate wraparound behavior for integer types smaller than the processor word size.
The Fermi 2D engine implements both image blit and resolve operations, supporting subpixel sampling with both linear and point filtering.
Resolve operations are performed by sampling from the center of each pixel in order to resolve the final image from the MSAA samples
MSAA images are stored in memory like regular images but each pixels dimensions are scaled: e.g for 2x2 MSAA
```
112233
112233
445566
445566
```
These would be sampled with both duDx and duDy as 2 (integer part), resolving to the following:
```
123
456
```
Blit operations are performed by sampling from the corner of each pixel, scaling the image as one would expect.
This implementation isn't fully complete as Vulkan blit doesn't support some combinations which Fermi does, most notably between colour and depth stencil. These will be implemented properly at a later date, likely after the texture manager rework.
Out of Bounds Blit, used by some OpenGL games is also missing since supporting it requires texture aliasing, this will also be supported after the texture manager rework.
Co-authored-by: Billy Laws <blaws05@gmail.com>
Certain writes during swizzling went out of bounds due to incorrect `blockExtentY` calculation, the previous commit to fix this ended up breaking it further. This commit returns to the original commit's calculations with the proper addendum of a check for exact alignment with a GOB which is the case that was broken earlier.
The `GuestTexture::GetLayerStride` function was not always being utilized to retrieve the layer stride inside `Texture`, it would instead directly access the `guestTexture::layerStride` member. This is problematic as it may not be initialized and return `0` which would lead to a broken image copy.
Most engines have the capability to release a semaphore payload (or reduce in the case of GPFIFO) when a method is called or action is complete. Semaphores are used by games for both timing how long things take on GPU and waiting on resources so missing them can cause deadlocks or other related issues.
Textures can have more than one layer which we currently don't handle, all layers past the initial one will be filled with random data or 0s, leading to incorrect rendering. This has now been implemented now which fixes any titles which utilize array textures, such as "Super Mario Odyssey" or "Hatsune Miku: Project DIVA MegaMix".
The Maxwell3D RT layer count wasn't being set correctly as it has the same register as the depth values and is toggled between the two based on another register value.
The Maxwell GPU supports 3D textures which are tiled with the block-linear layout which didn't handle swizzling 3D textures correctly till now. This commit addresses that by implementing proper swizzling for 3D textures. Titles such as Cluster Truck and Super Mario Odyssey utilize 3D textures alongside a vast majority of other titles.
As per VMA docs: 'Allocation size returned in this variable may be greater than the size requested for the resource e.g. as VkBufferCreateInfo::size. Whole size of the allocation is accessible for operations on memory e.g. using a pointer after mapping with vmaMapMemory(), but operations on the resource e.g. using vkCmdCopyBuffer must be limited to the size of the resource.'
There were two issues here:
- If a skyline span was passed as a param then the 'T &object' version would be called, filling the span itself with random values rather than its contents
- Random numbers were repeated every call since independent_bits_engine copied generator state and thus it was never actually updated
This calculation for the amount of lines on the Y axis relative to the start of the last block was wrong and would instead determine the amount of lines to the last Y-axis GOB which wasn't accurate when padding was considered, this resulted in titles like Celeste having broken texture decoding (on a 1922x1082 texture) for the last ROB as most pixels would be masked out.
Certain titles such as BOTW trigger behavior to reuse an attachment within the same subpass, this caused an exception inside `RenderPassNode::AddAttachment` as it cannot find corresponding subpass for attachment. To fix this issue, we now assume that when it cannot find a subpass for an existing attachment, it is attached to the latest subpass and return the attachment.
Certain textures may be unaligned with a GOB's height of 8 lines, we already handle the case of being unaligned with a GOB's width of 64-bytes. This case occurs on titles such as SMO when going in-game.
The function now returns from a segmentation fault when a debugger is present, this allows the entire context to be intact which can allow the debugger to correctly pick up variables from all stack frames while it could not extrapolate most variables when trapped inside the signal handler without the values of all registers.
In the Maxwell 3D engine, instanced draws are implemented by repeating the exact same draw in sequence with special flag set in vertexBeginGl. This flag allows either incrementing the instance counter or resetting it, since we need to supply an instance count to the host API we defer all draws until state changes occur. If there are no state changes between draws we can skip them and count the occurences to get the number of instances to draw.
Implements register state that corresponds to the size of a single point sprite in Maxwell 3D, this is emitted by the shader compiler in the preamble but needs to be only applied if the input topology is a point primitive and it is invalid to set the point size in any other case.
Earlier texture locking design required the lock to be retained but since the introduction of `AttachTexture`, this no longer needs to be done. This being done caused deadlocks when the depth texture is sampled by the fragment shader while being bound as an RT since it would attempt to lock the texture again.
A basic `bcat:u` implementation to prevent titles such as "Kirby and the Forgotten Land" dependent on BCAT support from crashing due to the lack of an implementation.
This is a widely supported feature that games may require conditionally but due to it being supported on effectively all target devices, it was made mandatory. This is used by titles such as ARMS.
Improves the readability of the log and replaces the previously uninformative prefix of `operator()` due to being in a lambda with `Controller support`.
Maxwell3D has a register for linking the TIC/TSC index in bindless texture handles, this is used by games to implement bindless combined texture-sampler handles.
Implements `GraphicsEnvironment::ReadCbufValue` & `GraphicsEnvironment::ReadTextureType` with a framework of heterogeneous lookups for caching and callbacks for querying constant buffer or TIC values with validation checks for successive draws to ensure unique IR is generated.
The `descriptorSetWrites` being filled is now optional and the case of it being empty is handled correctly, this is done by certain titles such as ARMS and is entirely valid behavior. It should be noted that not doing this leads to errors in the guest due to invalid GPU state while working on the host GPU.
SVC `SignalToAddress` had a bug with the behavior of `SignalAndModifyBasedOnWaitingThreadCountIfEqual` which was entirely incorrect and led to deadlocks in titles such as ARMS that were dependent on it. This commit corrects the behavior and refactors both SVCs and moves their arbitration/waiting to inside the corresponding `KProcess` function rather than the SVC to avoid redundancies and improve code readability.
Filtering of validation logs is now extended beyond BCn formats and now covers other format which have their feature set misreported by the driver, this significantly drives down the amount of logs depending on the title.
Implements an algorithm to determine formats that can be aliased as views without needing `VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT`, this avoids spamming warning logs on view creation when the aliased formats will function in practice.
There was an oversight with exclusive subpasses which could lead to RPs with more than one subpass could be created even though one pass was exclusive, this oversight was not finishing the render pass at the end of `AddSubpass`. This could lead to a future subpass adding to the end of that RP even though it was intended to exclusively have a single subpass.
This case occurs in titles such as Celeste (in-game) and breaks rendering on GPUs that may require exclusive subpasses for proper functionality.
The Khronos Validation Layer can often generate warning/error logs due to our intentional breakage from Vulkan specification, these can occur several times a frame resulting in the logs being spammed and making it difficult to extract useful information out of logs. The scope of these logs has now been reduced with more general filtering and the introduction of specialized filtering to handle complex cases such as BCn hacks with `libadrenotools` on Adreno devices.
Descriptor set updates were broken on the non-push-descriptor path due to lifetime issues with VkDescriptorSetLayout's usage during the execution phase which entirely broke rendering on AMD/Mali GPUs due to them not supporting `VK_KHR_push_descriptor`.
This commit addresses that by moving the allocation of a descriptor set to outside the lambda and into the recording phase, it also simplifies the semantics and resources passed into the lambda by removing redundancies.
The Vulkan render pass cache was fundamentally broken since it was designed around the Render Pass Compatibility clause due to being designed for framebuffer compatibility initially. As this scope was extended to a general render pass cache, the amount of data in the key was not extended to include everything it should have. This commit introduces the missing pieces in the RP cache and simplifies the underlying code in the process.
The backing for shader data would implicitly be zero-initialized due to a `resize` on every shader parse, this was entirely unnecessary as we would overwrite the entire range regardless.
We avoid this by using statically allocated storage and a span over it containing the shader bytecode which avoids any unnecessary clear semantics without resorting to more complex solutions such as a custom allocator.
Implements a cache for storing `VkFramebuffer` objects with a special path on devices with `VK_KHR_imageless_framebuffer` to allow for more cache hits due to an abstract image rather than a specific one.
Caching framebuffers is a fairly crucial optimization due to the cost of creating framebuffers on TBDRs since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding framebuffer memory.
There are a lot of cases of `VkImageView` being recreated arbitrarily due to it being tied to the ephemeral object `TextureView` rather than `Texture`, this commit flips that by storing all `VkImageView`s inside `Texture` with `TextureView` simply holding a copy of the handle to them. Additionally, this change results in stable `VkImageView` handles and helps in paving the path for framebuffer caching when `VK_KHR_imageless_framebuffer` is unavailable.
As we desire more accurate profiling data in certain circumstances, making the app explicitly profilable will allow for this, it will also remove the (annoying) prompt to do this in the Android Studio profiler.
Implements a cache for storing `VkRenderPass` objects which are often reused, they are not extremely expensive to create generally but this is a required step to build up to a framebuffer cache which is an extremely expensive object to create on TBDRs generally since it involves calculating tiling memory allocations and in the case of Adreno's proprietary driver involves several kernel calls for mapping and allocating the corresponding memory.
We run into a lot of successive subpasses with the exact same framebuffer configuration which we now exploit to avoid the creation of a new subpass due to the overhead involved with this. This provides significant performance boosts in certain cases due to the magnitude of difference in the amount of subpasses being created while providing next to no benefit in other cases.
The check for the fence cycle being the same as the current cycle was incorrectly inverted to be the opposite of what it should have been, leading to bugs.
The responsibility for synchronizing a texture and locking it is now on the `PresentationEngine` rather than the API-user as this'll allow more fine grained locking and delay waiting until necessary.
As we require a relaxed version of the Vulkan render pass compatibility clause for caching multi-subpass render passes, we now utilize a quirk to determine if this is supported which it is on Nvidia/Adreno while AMD/Mali where it isn't supported we force single-subpass render passes.
We found out that certain vendors such as Nvidia had a limitation on the global priority of a queue and requesting `VK_QUEUE_GLOBAL_PRIORITY_HIGH_EXT` would result in `VK_ERROR_NOT_PERMITTED_EXT`. A quirk has been introduced to supply the maximum supported global priority which is currently set on a per-vendor basis to avoid future crashes.
Implements a cache for storing `VkPipeline` objects which are fairly expensive to create and doing so on a per-frame basis was rather wasteful and consumed a significant part of frametime. It should be noted that this is **not** compliant with the Vulkan specification and **will** break unless the driver supports a relaxed version of the Vulkan specification's Render Pass Compatibility clause.
We can use inline push descriptors for writing to descriptor rather than allocating a descriptor set for a one time write and freeing it as this is rather inefficient while an inline push descriptor generally ends up being a direct `memcpy` on the driver side designed for this use-case.
We want Skyline to have the most favorable GPU scheduling possible due to low latency and high throughput requirements, we request high priority scheduling due to this reason.
This implements all Maxwell3D registers and HLE Vulkan state for Tessellation including invalidation of the TCS (Tessellation Control Shader) state during state changes.
Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer.
We had earlier tried to fix this by using vkCmdUpdateBuffer however this caused significant performance loss due to an oversight in Adreno drivers. We could have worked around this simply by using vkCmdCopy buffer however there would still be a performance loss due to renderpasses being split up with copies inbetween.
To avoid this we introduce 'megabuffers', a brand new technique not done before in any other switch emulators. Rather than replaying the copies in sequence on the GPU, we take advantage of the fact that buffers are generally small in order to replay buffers on the GPU instead. Each write and subsequent usage of a buffer will cause a copy of the buffer with that write, and all prior applied to be pushed into the megabuffer, this way at the start of execute the megabuffer will hold all used states of the buffer simultaneously. Draws then reference these individual states in sequence to allow everything to work without any copies. In order to support this buffers have been moved to an immediate sync model, with synchronisation being done at usage-time rather than execute (in order to keep contents properly sequenced) and GPU-side writes now need to be explictly marked (since they prevent megabuffering). It should also be noted that a fallback path using cmdCopyBuffer exists for the cases where buffers are too large or GPU dirty.
As bindings weren't correctly handled due to the fact that `EmitSPIRV` would change the bindings, the shader module cache would not correctly function and have no cache hits in `find` and rather have them in `try_emplace` which negated any performance benefit of it. This has now been fixed by retaining the initial cache key for insertion into the cache while also storing the post-emit bindings and restoring them during a cache hit.
Implements caching of the compiled shader module (`VkShaderModule`) in an associative map based on the supplied IR, bindings and runtime state to avoid constant recompilation of shaders. This doesn't entirely address shader compilation as an issue since host shader compilation is tied to Vulkan pipeline objects rather than Vulkan shader modules, they need to be cached to prevent costly host shader recompilation.
This implements the first step of a full shader cache with caching any IR by treating the shared pointer as a handle and key for an associative map alongside hashing the Maxwell shader bytecode, it supports both single shader program and dual vertex program caching.
We desire the ability to hash and check equality of data across spans to use associative containers such as `std::unordered_map` with spans. The implemented functions provide an easy way to do that.
Mostly based off of yuzu's implementation, this will need to be extended in the future to open up a UI for configuring controllers according to the applications requirements.
As there was no check for the lack of a `GuestTexture`/`GuestBuffer`, it would lead to UB when a texture/buffer that had no guest such as the `zeroTexture` from `GraphicsContext` would be marked as dirty they would cause a call to `NCE::RetrapRegions` with a `nullptr` handle that would be dereferenced and cause a segmentation fault.
In certain situations such as constant buffer updates, we desire to use the guest buffer as a shadow buffer forwarding all writes directly to it while we update the host using inline buffer updates so they happen in-sequence. This requires special behavior as we cannot let any synchronization operations take place as they would break the shadow buffer, as a result, an external synchronization flag has been added to prevent this from happening.
It should be noted that this flag is not respected for buffer recreation which will lead to UB, this can and will break updates in certain cases and this change isn't complete without buffer manager support.
The offset of the view wasn't added to the `vkCmdUpdateBuffer`, this would cause the offset to be incorrect given the buffer was a view of a larger buffer that wasn't the start of it. This commit fixes that by adding the offset of the view to the buffer update.
We didn't call `MarkGpuDirty` on textures/buffers prior to GPU usage, this would cause them to not be R/W protected when they should be and provide outdated copies if there were any read accesses from the CPU (which are not possible at the moment since we assume all accesses are writes at the moment). This has now been fixed by calling it after synchronizing the resource.
The terminology "Non-Graphics pass" was deemed to be fairly inaccurate since it simply covered all Vulkan commands (not "passes") outside the render-pass scope, these may be graphical operations such as blits and therefore it is more accurate to use the new terminology of "Outside-RenderPass command" due to the lack of such an implication while being consistent with the Vulkan specification.
Previously constant buffer updates would be handled on the CPU and only the end result would be synced to the GPU before execute. This caused issues as if the constant buffer contents was changed between each draw in a renderpass (e.g. text rendering) the draws themselves would only see the final resulting constant buffer. Fix this by updating cbufs on the GPU/CPU seperately, only ever syncing them back at the start or after a guest side CPU write, at the moment only a single word is updated at a time however this can be optimised in the future to batch all consecutive updates into one large one.
We require certain buffers to only be on the host while being accessible through the same abstractions as a guest buffer as they must be interchangeable in usage.
We needed to block stack frame lookups past JNI code as Java doesn't follow the ARMv8 frame pointer ABI which leads to invalid pointer dereferences. Any JNI function that throws or handles exceptions must do this now or it may lead to a `SIGSEGV`.
Some games may pass empty TICs as inputs to shaders while not actually using them within the shader. Create an empty texture and pass this in instead when we hit this case, the nullDescriptor feature could be used but it's not supported by all devices so we chose to do it this way instead.
Skyline's `exception` class now stores a list of all stack frames during the invocation of the exception. These can later be parsed by the exception handler to generate a human-readable stack trace. To assist with more complete stack traces, `-fno-omit-frame-pointer` is now passed on debug builds which forces the inclusion of frames on function calls.
NCE is implicitly depended on by the `GPU` class due to the NCE Memory Trapping API so the destruction of it must take place after the destruction of the `GPU` class. Additionally, to prevent bugs the NCE destructor must set `staticNce` to `nullptr` as the signal handler will potentially access a destroyed instance of NCE otherwise.
Without this sRGB textures would be interpreted as RGB leading to colours being slighly off. The sRGB flag isn't stored as part of format word so we reuse the _pad_ field of it to store the flag for the switch case.
We don't want to actually exit the process as it'll automatically be restarted gracefully due to a timeout after being unable to exit within a fixed duration so we just want to infinite sleep during termination. This should fix issues where exiting any game would cause the app to force close after some time as exception signal handling would fail in the background, the app should stay open now and automatically restart itself when another game is loaded in.
A lot of logs are incomplete due to being unable to flush inside the signal handler, now we flush after any exceptions so that there is a guarantee of any exceptions being logged as this is crucial for proper debugging.
B5G6R5 isn't generally supported by the swapchain and the format is used for R5G6B5 with swapped R/B channels to avoid aliasing so we reverse that by using R5G6B5 as the underlying Vulkan format for the swapchain which should be automatically handled by the driver for any copies from B5G6R5 textures and the data representation should be the same as B5G6R5 with swapped R/B channels so not reporting the correct texture::Format should be fine.
The DMA engine is used to perform DMA buffer/texture copies directly on the GPU. It can deswizzle arbritary regions of input textures, perform component remapping and swizzle into output textures.
This impl only supports 1D buffer copies, 2D ones will come later.
If we have a Nx1x1 image then determining the type from dimensions will result in a 1D image being created thus preventing us from creating a 2D view. By using the image view type we can avoid this for textures from TICs since we know in advance how they will be used
This enforces that the depth RT outlives the draw, without this the depth RT could be freed while in active use by command executor leading to UAFs and crashes.
This was erroneously included while migrating from older code where stack creation was entirely handled with host constructs such as `mmap` directly to using `KPrivateMemory` to manage it, we would create a guard page with `mprotect` that the guest was unaware about and would cause a segfault when a guest accessed the extents of the stack as reported to the guest.
A partial implementation of the `GetThreadContext3` SVC, we cannot return the whole thread context as the kernel only stores the registers we need according to the ARMv8 ABI convention and so far usages of this SVC do not require the unavailable registers but all future usage must be monitored and potentially require extending the amount of saved registers.
The vibration device had to be set manually prior which led to it generally not being set at all even though a user might want vibration, this commit fixes that by making controller #0 use the built-in vibrator by default.
Any Skyline files that should have been user-accessible were moved from `/data/data/skyline.emu/files` to `/sdcard/Android/data/skyline.emu/files` as the former directory is entirely private and cannot be accessed without either adb or root. This made retrieving certain data such as saves or loading custom driver shared objects extremely hard to do while this can be trivially done now.
In some games such as SMO thousands of constant buffers are bound per frame which was causing an unreasonable number of lookups in both vmm and the buffer manager. Work around this by introducing a simple hashmap based cache, eviction is currently unsupported but not really necessary yet due to the small size of the buffers in the cache.
We cannot ignore accesses from the host to a region protected by the NCE Memory Trapping API, there's often access to regions which have overlap with a protected region unintentionally and those accesses need to be handled correctly rather than leading to a crash. This is done by implementing an additional signal handler `NCE::HostSignalHandler` to lookup any potential traps on a `SIGSEGV` and handle them correctly or when there isn't a corresponding trap raise a `SIGTRAP` when debugger is connected or delegate to `signal::ExceptionalSignalHandler` when it isn't.
To cut down memory usage we now page out memory that is RW trapped via the NCE memory trapping API, the callbacks are supposed to page in the memory. This behavior is backed up by Texture/Buffer syncing which would read the host copies of data and write it to the guest, by paging the corresponding data on the guest we're avoiding redundant memory usage.
The `FileDescriptor` class is a RAII wrapper over FDs which handles their lifetimes alongside other C++ semantics such as moving and copying. It has been used in `skyline::kernel::MemoryManager` to handle the lifetime of the ashmem FD correctly, it wasn't being destroyed earlier which can result in leaking FDs across runs.
Initially this commit was only intended to update LLVM but due to a compilation error on latest LLVM libcxx due to the C++ stdlib header `<algorithm>` being a transitive dependency that is no longer transitively included on the latest LLVM libcxx (as of https://reviews.llvm.org/D119667), this required changes in Skyline and Oboe which were done in https://github.com/google/oboe/pull/1521 and the submodule has been updated to include those changes.
These are mostly used in 3D games like SMO, support is still quite basic and synchronising block linear 3D texture will crash in most cases due to them being unimplemented.
Some games crash due to requiring an `audren` version greater than 7. The `audren` version can be increased without any issues as `audren` is stubbed and therefore the reported version doesn't matter.
Older Adreno proprietary drivers (5xx and below) will segfault while destroying the renderpass and associated objects if more than 64 subpasses are within a renderpass due to internal driver implementation details. This commit introduces checks to automatically break up a renderpass when that limit is hit.
We have support for overlapping buffers which allows us to merge a lot of smaller buffers located on a single page into a single larger buffer which allows for better performance. It additionally ensures that all host buffers match the alignment guarantees of the guest and adequately fulfill host alignment requirements.
This commit encapsulates a complex sequence of cascading changes in the process of supporting overlaps for buffers:
* We determined that it is impossible to resolve overlaps with multiple intervals per buffer within the constraints of each overlap being a contiguous view, support for multiple intervals was therefore dropped. The older buffer manager code was entirely reworked to be simpler due to only handling one interval per buffer with code now being based off `IntervalMap` but tailored specifically for buffers.
* During overlap resolution, the problem of how existing views into the buffer being recreated would be updated, it had to be replaced with a larger buffer that could contain all overlaps and all existing views would need to be repointed to it. This was addressed by a buffer owning all views to itself, we could automatically recalculate the offset of all views and update the buffers with it.
* We still needed to update usage of existing views which was done by handling all access (such as inside a recorded draw) to buffer view properties via `BufferView::RegisterUsage` which dispatches a callback with the view and the corresponding backing buffer. This callback can be stored and called during overlap resolution with the new buffer.
* We had issues with lifetime of the buffer with the handle-like semantics of `BufferView` introduced in the last buffer-related commit, if we updated the view to be owned by a new buffer we'd need to extend the lifetime of the new buffer not the older one and the only way to do this was a proxy owner object `BufferDelegate` which holds a shared pointer to the real `Buffer` which in-turn holds a pointer to all `BufferDelegate` objects to update on repointing. A `BufferView` is effectively just a wrapper around `std::shared_ptr<BufferDelegate>` with more favorable semantics but generally just forwarding calls.
It should be additionally noted that to support usage of `RegisterUsage` the code around buffers in `GraphicsContext` was refactored to defer truly binding till the recording phase.
Due to an oversight, we weren't clearing the list of buffers that needed to be synced after every execution which led to them building up. Due to the relatively cheap synchronization of buffers and only doing so on faults this wasn't caught until now, it does depress the framerate significantly over time due to the size of the list growing to be in the range of 100k buffer views depending on the title.
The Kepler compute engine is used to run compute jobs encapsulated in to QMDs on the GPU, this commit doesn't implement compute itself but adds the register and QMD structs that will be needed for it in the future.
We wanted views to extend the lifetime of the underlying buffers and at the same time preserve all views until the destruction of the buffer to prevent recreation which might be costly in the future when we need `VkBufferView`s of the buffer but also require a centralized list of all views for recreation of the buffer. It also removes the inconsistency between `BufferView*` being returned in `GetXView` in `GraphicsContext`.
Alised descriptor sets are incorrectly interpreted by the shader compiler causing it to bugger up LLVM function argument types and crash
Co-authored-by: PixelyIon <pixelyion@protonmail.com>
This controls the depth range used by the shader, hades already has support for the necessary patching so we only need to pass the current mode over to it and it'll do the necessary work.
Using `eB5G6R5UnormPack16` (with a swizzle for `R5G6B5Unorm`) removes the need for `VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT` when those formats are aliased which happens in Sonic Mania among other titles.
Adreno GPUs have significant performance penalties from usage of `VK_IMAGE_CREATE_MUTABLE_FORMAT_BIT` which require disabling UBWC and on Turnip, forces linear tiling. As a result, it's been made an optional quirk which doesn't supply the flag in `VkImageCreateInfo` and logs a warning if a view with a different Vulkan format from the original image is created.
We often need to alias the underlying data as multiple Vulkan formats which requires the `eMutableFormat` bit to be set in `VkImageCreateInfo`, without doing this there'll be validation layer errors and potentially GPU bugs.
As we no longer set the layout to general inside the Texture constructor, yet, we need it to be set prior to the image being used as an attachment. We need to transition the layout to `eGeneral` after creation of the texture object.
Any `RecyclerView`s with an app bar in a `CoordinatorLayout` would end up going off-screen due to the layout behavior implementing an offset by using a transform which would not correctly handle focusing on off-screen objects. This has now been fixed by manually adjusting height to be clipped to what is visible on the screen.
We collapse the app bar when the focus is on the app list which only occurs while using a controller, this is required as the app bar will never be collapsed otherwise. It also removes the older code to work around the limitation on `View.FOCUS_DOWN` by collapsing only when the end of the list was reached.
Removes card elevation as it visually conflicts with the scrim, this also makes the scrim a bit darker to emphasize the text and slightly reduces the border radius.
The entire layout is now selectable for grid items rather than just the card, this greatly increases the visibility of the selection when not in touch mode as the contrast of a darken effect on the icon can be minimal depending on how dark the icon already is.
The `InputStream` would not be closed after reading the key file in `KeyReader#import`, it's now wrapped with `use{ }` which handles closing the stream after usage.
Setting the refresh rate via the Display API's`preferredDisplayModeId` is an outdated method to do it on Android 11 and above, we now use `Surface#setFrameRate` alongside it to suggest a refresh rate for the display.
We incorrectly determined an Adreno driver bug to require padding between binding slots but the real issue was not supporting consecutive binding writes for `VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER` and was fixed by the padding slot unintentionally requiring individual writes. The quirk has now been corrected to explicitly specify this as the bug and the solution is more apt.
Any lookups done using `GetAlignedRecursiveRange` incorrectly added intervals in the exclusive interval entry lookups as the condition for adding them was the reverse of what it should've been due to a last minute refactor, it led to graphical glitches and crashes. This has been fixed and the lookups should return the correct results.
On certain devices, accesses to a protected memory region can return `si_code` as non-`SEGV_ACCERR` values, this leads to a crash as we only pass access violations to the trap handler and would lead to not doing so on those devices which would then result in going to the crash handler.
A large amount of Texture/Buffer views would expire before reuse could occur in `Texture::GetView`/`Buffer::GetView`. These can lead to a substantial memory allocation given enough time and they are now deleted during the lookup while iterating on all entries.
It should be noted that there are a lot of duplicate views that don't live long enough to be reused and the ultimate solution here is to make those views live long enough to be reused.
Similar to constant redundant synchronization for textures, there is a lot of redundant synchronization of buffers. Albeit, buffer synchronization is far cheaper than texture synchronization it still has associated costs which have now been reduced by only synchronizing on access.
There was a lot of redundant synchronization of textures to and from host constantly as we were not aware of guest memory access, this has now been averted by tracking any memory accesses to the texture memory using the NCE Memory Trapping API and synchronizing only when required.
An API for trapping accesses to guest memory and performing callbacks based on those accesses alongside managing protection of the memory. This is a fundamental building block for avoiding redundant synchronization of resources from the guest and host.
Note: All accesses are treated as write accesses at the moment, support for picking up read accesses will be implemented later
An interval map is a crucial piece of infrastructure required for memory faulting to track any regions that have an associated callback and their protection. Additionally, efficient page-aligned lookups with semantics optimal for memory faulting are also a requirement and the ability to associate multiple regions with a single callback/protection entry rather than doing so on a per-region basis as we deal with split-mapping resources.
This is a prerequisite to memory trapping as we need to write to the mirror to avoid a race condition with external threads writing to a texture/buffer while we do so ourselves for the sync on a read/write, it also avoids an additional `mprotect` to `-WX`/`RWX` on a read access.
An additional advantage for textures especially is that we now support split-mapping textures due to laying them out in a contiguous mirror and they will not require costly algorithmic changes. Buffers should also benefit from not needing to iterate over every region when they are split into multiple mappings.
`CreateMirror` is limited to creating a mirror of a single contiguous region which does not work when creating a contiguous mirror of multiple non-contiguous regions. To support this functionality, `CreateMirrors` which expects a list of page-aligned regions and maps them into a contiguous mirror.
We want to create arbitrary mirrors in the guest address space and to make this possible, we map the entire address space as a shared memory file. A mirror is mapped by using `mmap` with the offset into the guest address space.
Previously for methods with count > 1 the subchannel and engine would be looked up for each part of the method rather than only doing so at the start. Each call also needed to be looked up to see if it touched a macro or GPFIFO method. Fix this by doing checks outside of the main dispatch loop with templated helper lambdas to avoid needing to repeat lots of code. Maxwell3D is the only subchannel with a fast path for now but more can be added later if needed.
Almost every Maxwell format now directly corresponds to a Vulkan format. This allows formats to be passed through and the swizzle used directly from guest (with some extra swizzle handling for edge cases) thus saving the need to explicitly support each swizzle combination which is adds a lot of code bloat. The format header is additionally reordered with line breaks to separate formats by their bits-per-block.
We always submit pipeline divisor descriptions regardless of binding input rate being vertex rather than instance. This is invalid behavior and has been fixed by only submitting binding descriptors when the input rate is per-instance.
Adreno proprietary drivers suffer from a bug where `VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER` requires 2 descriptor slots rather than one, we add a padding slot to fix this issue. `QuirkManager` was introduced to handle per-vendor/per-device errata and allow enabling this on Adreno proprietary drivers specifically as to not affect the performance of other devices.
Quirk terminology was deemed to be inappropriate for describing the features/extensions of a device. It has been replaced with traits which is far more fitting but quirks will be used as a terminology for errata in devices.
The texture handle offset calculation involved an incorrect shift by descriptor size which was found to be unnecessary and would result in an invalid handle that had the wrong TIC/TSC index and caused broken rendering.
`nodes` and `syncTextures` were cleared after waiting on the `CommandExecutor` fence rather than before, this wasted execution time after the wait for something that could be performed prior to the wait.
We now attempt to enable `VK_KHR_uniform_buffer_standard_layout` when present as lax UBO layout significantly reduces complexity. If a device doesn't support this extension, we still assume that the device supports it implicitly as this has proven to be true across all major mobile GPU vendors regardless of the driver version but enabling this prevents validation layer errors.
We depend on past commands to have completed execution in a renderpass, a subpass dependency on all graphics stages from `VK_SUBPASS_EXTERNAL` to subpass #0 is used to enforce this. Nvidia and Adreno proprietary drivers implicitly do this but Turnip or Mali drivers require this or they execute out of order.
Blocklinear texture decoding was broken for padding blocks and would incorrectly decode them resulting in major texture corruption for any textures with their widths not aligned to 64 bytes. This has now been fixed with neater code which avoids redundant repetition of any code using lambdas and functions where necessary.
Stencil operations are configurable to be the same for both sides or have independent stencil state for both sides. It is controlled via the previously unimplemented `stencilTwoSideEnable`.
Fermi2D supports macros in addition to Maxwell3D, these both share code memory. To support this we rework the macro interpreter to support passing in a target engine and abstract the communications out into an interface that can be implemented by applicable engines.
```
GPFIFO <-> MME <-> Maxwell3D
^ ^---> Fermi2D
X------------> I2M
X------------> MaxwellComputeB
X--Flush-----> MaxwellDMA
```
Shader programs allocate instructions and blocks within an `ObjectPool`, there was a global pool prior that was never reaped aside from on destruction. This led to a leak where the pool would contain resources from shader programs that had been deleted, to avert this the pools are now tied to shader programs.
The size of blocklinear textures did not consider alignment to Block/ROB boundaries before, it is aligned to them now. Incorrect sizes led to textures not being aliased correctly due to different size calculations for GraphicBufferProducer surfaces and Maxwell3D color RTs.
erase invalidated `it` leading to a potential segfault if the GPU was very far behind, bail out early to avoid that since there can only be one occurence at most in the buffer anyway.
Implements the entirety of Maxwell3D Depth/Stencil state for both faces including compare/write masks and reference value. Maxwell3D register `stencilTwoSideEnable` is ignored as its behavior is unknown and could mean the same behavior for both stencils or the back facing stencil being disabled as a result of this it is unimplemented.
We don't respect the host subresource layout in synchronizing linear textures from the guest to the host when mapped to memory directly, this leads to texture corruption and while the real fix would involve respecting the host subresource layout, this has been deferred for later as real world performance advantages/disadvantages associated with this change can be observed more carefully to determine if it's worth it.
Color RTs are disabled by setting their format as `None`, it was removed while transitioning to macros and resulted in a missing format exception. It has been readded as several applications depend on this behavior.
Using `std::vector` for shader bytecode led to a lot of reallocation due to constant resizing, switching over the static vector allows for a single static allocation of the maximum possible guest shader size (1 MiB) to be done for every stage resulting in a 6 MiB preallocation which is unnoticeable given the total memory overhead of running a Switch application.
The `OneMinusSourceAlpha` blending factor was converted to `eOneMinusSrcColor` rather than `eOneMinusSrcAlpha` leading to incorrect blending behavior in certain titles. A similar issue with the order of `MinimumGL`/`MaximumGL` and `SubtractGL`/`ReverseSubtractGL` being the opposite of what it should've been, both of these issues have been fixed.
`NextSubpassNode` didn't increment `subpassIndex` which runs commands with the wrong subpass index resulting in them accessing invalid attachments or other bugs that may arise from using the wrong subpass.
All Maxwell3D state was passed by reference to the draw command lambda, this would break if there was more than one pass or the state was changed in any way before execution. All state has now been serialized by value into the draw command lambda capture, retaining state regardless of mutations of the class state.
Any usage of a resource in a command now requires attaching that resource externally and will not be implicitly attached on usage, this makes attaching of resources consistent and allows for more lax locking requirements on resources as they can be locked while attaching and don't need to be for any commands, it also avoids redundantly attaching a resource in certain cases.
If an object is attached to a `FenceCycle` twice then it would cause `FenceCycleDependency::next` to be overwritten and lead to destruction of dependencies prior to the fence being signaled causing usage of deleted resources. This commit fixes this by tracking what fence cycle a dependency is currently attached to and doesn't reattach if it's already attached to the current fence cycle.
An assumption was hardcoded into `Shader::Profile` regarding devices supporting demotion of shader invocations to helpers. This assumption wasn't backed by enabling the `VK_EXT_shader_demote_to_helper_invocation` extension via a quirk leading to assertions when it was used by the shader compiler, a quirk has now been added for the extension and is supplied to the shader compiler accordingly.
If the controller type was changed from a type with a larger amount of buttons/axes to one with a fewer amount, a crash would occur due to the transition animation retaining those elements as children yet returning `NO_POSITION` from `getChildAdapterPosition` in `DividerItemDecoration` which was an unhandled case and led to an OOB array access.
A bug caused by not passing the index argument to `ControllerActivity` led to all preferences opening the activity that pertained to Controller #1. This was fixed by passing the `index` argument in the activity launch intent.
Fixes texture corruption due to incorrect synchronization, the barrier would not enforce waiting till the texture was entirely rendered causing an incomplete texture to be downloaded which lead to rendering bugs for certain GPUs including ARM's Mali GPUs.
A bug caused an assertion if both `VK_EXT_custom_border_color` and `VK_EXT_vertex_attribute_divisor` due to mistakenly unlinking `PhysicalDeviceVertexAttributeDivisorFeaturesEXT` instead of `PhysicalDeviceCustomBorderColorFeaturesEXT` when `VK_EXT_custom_border_color` isn't supported which would potentially lead to unlinking the same structure twice and cause the assertion.
Implements inline constant buffer updates that are written to the CPU copy of the buffer rather than generating an actual inline buffer write, this works for TIC/TSC index updates but won't work when the buffer is expected to actually be updated inline with regard to sequence rather than just as a buffer upload prior to rendering.
GPU-sided constant buffer updates will be implemented later with optimizations for updating an entire range by handling GPFIFO `Inc`/`NonInc`directly and submitting it as a host inline buffer update.
There should only ever be a single instance of a `ActiveDescriptorSet` that tracks the lifetime of a descriptor set as the destructor is responsible for freeing the descriptor set.
There are cases where a new object inheriting the descriptor set needs to be created in these cases we need to have move semantics and make the destructor of the prior object inert, this allows for moving to the new object without any side effects. If the copy constructor was used in these cases the older object would free the set on its destruction which would lead to the set being invalid on existing instances which is incorrect behavior and would likely lead to driver crashes.
The descriptor sets should now contain a combined image and sampler handle for any sampled textures in the guest shader from the supplied offset into the texture constant buffer.
Note: Games tend to rely on inline constant buffer updates for writing the texture constant buffer and due to it not being implemented, the value will be read as 0 which is incorrect.
We want read semantics inside the constant buffer object via the mappings to avoid a pointless GPU VMM mapping lookup. It is a fairly frequent operation so this is necessary, the ability to write directly will be added in the future as well.
Implements parsing for the Maxwell 3D TIC pool and conversion of a TIC into a `GuestTexture`, support is limited to pitch-linear RGB565/A8R8G8B8 textures at the moment but will be extended as games utilize more formats and layouts. Support for 1D buffers is also omitted at the moment since they need special handling with them effectively being treated as buffers in Vulkan rather than images.
The pitch of the texture should always be supplied in terms of bytes as it denotes alignment on a byte boundary rather than a pixel one, it is also always utilized in terms of bytes rather than pixels so this avoids an unnecessary conversion.
Note: GBP stride unit was assumed to be pixels earlier but is likely bytes which is why there are no changes to the supplied value there, if this is not the case it'll be fixed in the future
Maxwell3D `TextureSamplerControl` (TSC) are fully converted into Vulkan samplers with extension backing for all aspects that require them (border color/reduction mode) and approximations where Vulkan doesn't support certain functionality (sampler address mode) alongside cases where extensions may not be present (border color).
Code involving caching of mappings was copied from `RenderTarget` without much consideration for applicability in buffers, the reason for caching mappings in RTs was that the view may be invalidated by more than the IOVA/Size being changed but this doesn't hold true for buffers generally so invalidation can only be on the view level with the mappings being looked up every time since the invalidation would likely change them.
`std::hash` doesn't have a generic template where it can be utilized for arbitrary trivial objects and implementing this might result in conflicts with other types. To fix this a generic templated hash is now provided as a utility structure, that can be utilized directly in hash-based containers such as `unordered_map`.
Nullability allow for optional semantics where a span may be explicitly invalidated with `nullptr` being used as a sentinel value for it and a boolean operator that allows trivial checking for if the span is valid or not.
Adds support for index buffers including U8 index buffers via the `VK_EXT_index_type_uint8` extension which has been added as an optional quirk but an exception will be thrown if the guest utilizes it but the host doesn't support it.
Add support for parsing and combining `VertexA` and `VertexB` programs into a single vertex pipeline program prior to compilation, atomic reparsing and combining is supported to only reparse the stage that was modified and recombine once at most within a single pipeline compilation.
Atomically invalidate pipeline stages as runtime information that pertains to them changes rather than never recompiling pipelines on runtime information being updated resulting in out of date pipelines or recompiling all pipelines on any runtime information updates.
Shader compilation is now broken into shader program parsing and pipeline shader compilation which will allow for supporting dual vertex shaders and more atomic invalidation depending on runtime state limiting the amount of work that is redone.
Bindings are now properly handled allowing for bound UBOs to be converted to the appropriate host UBO as designated by the shader compiler by creating Vulkan Descriptor Sets that match it.
We need this to make the distinction between a shader and pipeline stage in as shader programs are bound at a different rate than that of pipeline stage resources such as UBO.
An instance of `Shader::Backend::Bindings` must be retained across all stages for correct emission of bindings, which is now done inside `GraphicsContext::GetShaderStages`.
The vertex attribute types supplied prior were just the default which is `Float`, this works for some cases but will entirely break if the attribute type isn't a float. The attribute types are now set correctly.
Only copying a single aspect was supported by `CopyIntoStagingBuffer` earlier due to not supplying a `VkBufferImageCopy` for each aspect separately, this has now been done with Color/Depth/Stencil aspects having their own `VkBufferImageCopy` for the `VkCmdCopyImageToBuffer` command.
The definition of the `TextureView` class was spread across `texture.cpp` and has now been moved to the top of the file above the other half of the definition.
A buffer with 0 as the start/end IOVA should be invalid as there shouldn't be any mappings at 0 in GPU VA, titles such as Puyo Puyo Tetris configure the Vertex Buffer with 0 IOVAs which leads to a segmentation fault without this exception.
The lifetime of a texture and buffer view is now bound by the `FenceCycle` in `CommandExecutor`, this ensures that a `VkImageView` isn't destroyed prior to usage leading to UB.
The lifetime of all textures bound to a RenderPass alongside syncing of textures is already handled by `CommandExecutor` and doesn't need to be redundantly handled by `RenderPassNode`. It's been removed as a result of this.
Adds the depth/stencil RT as an attachment for the draw but with `VkPipelineDepthStencilStateCreateInfo` stubbed out, it'll not function correctly and the contents will not be what the guest expects them to be.
Support for clearing the depth/stencil RT has been added as its own function via either optimized `VkAttachmentLoadOp`-based clears or `vkCmdClearAttachments`. A bit of cleanup has also been done for color RT clears with the lambda for the slow-path purely calling the command rather than creating the parameter structures.
Implements `AddClearDepthStencilSubpass` in `CommandExecutor` which is similar to `ClearColorAttachment` in that it uses `VK_ATTACHMENT_LOAD_OP_CLEAR` for the clear which is far more efficient than using `VK_ATTACHMENT_LOAD_OP_LOAD` then doing the clear.
The stage/access mask for `VkSubpassDependency` were hardcoded to only be valid for color attachments earlier, this has now been fixed by branching based on the format aspect.
Sets `VkImageUsageFlags` correctly rather than hardcoding it for color attachments and adds multiple `VkBufferImageCopy` to `VkCmdCopyBufferToImage` for Color/Depth/Stencil aspects of an image.
Support the Maxwell3D Depth RT for Z-buffering, this just creates an equivalent `RenderTarget` object with no support on the API-user side (IE: `Draw` and `ClearBuffers`).
This prefixes all RT functions that deal with color RTs with `Color` and abstracts out common functions that will be used for both color and depth RTs. All common Maxwell3D structures are also moved out of the `ColorRenderTarget` (`RenderTarget` previously) structure.
To allow for caching of pipelines on the host a `VkPipelineCache` has been added, it is entirely in-memory and is not flushed to the disk which'll be done in the future alongside caching guest shaders to further avoid translation where possible.
Uses all Maxwell3D state converted into Vulkan state to do an equivalent draw on the host GPU, it sets up RT/Vertex Buffer/Vertex Attribute/Shader state and creates a stubbed out `VkPipelineLayout` for the draw. Any descriptor state isn't currently handled and is yet to be implemented, currently there's no Vulkan pipeline cache supplied which will be implemented subsequently.
We require a handle to the current renderpass and the index of the subpass in certain cases, this is now tracked by the `CommandExecutor` and passed in as a parameter to `NextSubpassFunctionNode` and the newly-introduced `SubpassFunctionNode`.
Switch from `SubmitWithCycle` to manually allocating the active command buffer to tag dependencies with the `FenceCycle` that prevents them from being mutated prior to execution. This new paradigm could also allow eager recording of commands with only submission being deferred.
`CommandScheduler` API users can now directly allocate an active command buffer that they need to manage alongside its fence, this can allow for more efficient recording as it doesn't need to be immediately submitted after, it can also allow attaching objects to a `FenceCycle` prior to submission that can be useful for locking resources.
Compiles shaders supplied by the guest with caching and automatic invalidation, the size of the shader is also automatically determined by looking for `BRA $` instructions which cause an infloop, it should be noted that we have a maximum shader bytecode size, any shader above this size will not be supported.
Graphics shaders can now be compiled using the shader compiler and emit SPIR-V that can be used on the host. The binding state isn't currently handled alongside constant buffers and textures support in `GraphicsEnvironment` yet.
The operands of the subtraction in the X/Y translation calculation were the wrong way around which led to negative translations that would translate the viewport off the screen.
The default color write mask should mask no channels and write all of them and should be mutated to mask out certain channels as required by the guest.
We cannot statically construct the vertex buffer/attribute arrays for Vulkan due to inactive attributes or buffers which isn't possible on Vulkan, we also cannot just change the count dynamically as there might be disabled buffers or attributes in the middle. We just have a `static_array` which should dynamically be filled in with buffer binding/attribute Vulkan structures before submission.
Buffers generally don't have formats that are fundamentally associated with them unless they're texel buffers, if that is the case it can be manually set in `BufferView`.
The Buffer Manager handles mapping of guest buffers to host buffer views with automatic handling of sub-buffers and eventually supporting recreation of overlapping buffers to create a single larger buffer.
Implements infrastructure for using guest buffers on the host for rendering, a `BufferManager` is still missing which'd handle mapping from guest buffers to host buffers and will be subsequently committed. It should be noted that `BufferView` is also disconnected from `Buffer` and shared for every instance with the same properties like `TextureView` is now.
We want `TextureView`(s) to be disconnected from the backing on the host and instead represent a specific texture on the guest with a backing that can change depending on mapping of new textures which'd invalidate the backing but should now be automatically repointed to an appropriate new backing. This approach also requires locking of the backing to function as it is mutable till it has been locked or the backing has an attached `FenceCycle` that hasn't been signaled which will be added for `CommandExecutor` in a subsequent commit.
Introduces the `supportsShaderViewportIndexLayer` quirk and sets `Shader::Profile::support_int64_atomics` depending on if the `supportsAtomicInt64` quirk is available.
Introduces the `floatControls`, `supportsSubgroupVote` and `subgroupSize` quirks for the shader compiler which are based on Vulkan `PhysicalDevice` properties.
Vulkan has officially deprecated `VK_VERSION_*` macros for versioning as it has introduced the variant into the version. It should however be `0` for the Vulkan APi and doesn't need to be printed.
Introduces several quirks for optional features used by the shader compiler which are now reported in the `Shader::HostTranslateInfo` and `Shader::Profile` structure. There are still property-related quirks for the shader compiler which haven't been implemented in this commit.
A `Buffer` class was created to hold any generic Vulkan buffer object with `span` semantics, `StagingBuffer` was implemented atop it as a wrapper for `Buffer` that inherits from `FenceCycleDependency` and can be used as such.
It was determined that `backing` wasn't a very descriptive name and that it conflicted with the texture's own backing, the name was changed to `texture` to make it more apparent that it was specifically the `Texture` object backing the view.
A memory manager function to read into a vector till it satisfies the supplied function or hits an early stop condition like hitting the end of vector or reaching an unmapped region. This can be used to efficiently scan for values in GPU VA.
When `VK_EXT_vertex_attribute_divisor` is not available, `VkPhysicalDeviceVertexAttributeDivisorFeaturesEXT` is unlinked from the device enabled feature list as it is undefined behavior to link a structure provided by an extension without enabling that extension.
`EXT_SET_V` would enable the extension regardless of if it was actually the correct extension or if the version was high enough as long as the hash matched.
Co-authored-by: Billy Laws <blaws05@gmail.com>
`shaderImageGatherExtended` is required by the shader compiler, to avoid complications associated with making it optional and considering that it's supported by the vast majority of Vulkan mobile devices, it was made a mandatory feature.
This class will be entirely responsible for any interop with the shader compiler, it is also responsible for caching and compilation of shaders in itself.
We want to utilize features from C++ 20 ranges but they haven't been entirely implemented in libc++ so in the meantime we use the reference implementation for it which is Ranges v3.
Any primitive topologies that are directly supported by Vulkan were implemented but the rest were not and will be implemented with conversions as they are used by applications, they are:
* LineLoop
* QuadList
* QuadStrip
* Polygon
Translates all Maxwell3D vertex attributes to Vulkan with the exception of `isConstant` which causes the vertex attribute to return a constant value `(0,0,0,X)` which was trivial in OpenGL with `glDisableVertexAttribArray` and `glVertexAttrib4(..., 0, 0, 0, 1)` but we don't have access to this in Vulkan and might need to depend on undefined behavior or manually emulate it in a shader. This'll be revisited in the future after checking host GPU behavior.
`ENUM_STRING` can be used inside a `class`/`struct`/`union` for `enum`s contained within them. Making the function `static` allows doing this and doesn't require supplying a `this` pointer of the enclosing class for usage.
This being made implicit removes any confusion that all cases would need to be implemented and explicitly define that the CF should continue onto the 2nd switch-case when it cannot find any matches in the first one.
Implements the `isVertexInputRatePerInstance` register array which controls if the vertex input rate is either per-vertex or per-instance. This works in conjunction with the vertex attribute divisor for per-instance attribute repetition of attributes.
We order all registers in ascending order, a few registers namely `colorLogicOp`, `colorWriteMask`, `clearBuffers` and `depthBiasClamp` were erroneously not following this order which has now been fixed.
We inconsistently utilized `typeof` and `decltype` all over the codebase, this has now been fixed by uniformly using `decltype` as `typeof` is a GCC extension and not in the C++ standard alongside having the hidden side effect of removing references from the determined type.
Check for `vertexAttributeInstanceRateZeroDivisor` in `VkPhysicalDeviceVertexAttributeDivisorFeaturesEXT` when the Maxwell3D register corresponding to the vertex attribute divisor is set to 0. If it isn't then it logs a warning and sets the value anyway which could result in UB since the only alternative is an exception that stops emulation which might not be optimal if the game mostly works fine without this, we will add a user-facing warning when we intentionally allow UB like this in the future.
Implement the infrastructure to depend on `VkPhysicalDeviceFeatures2` extended feature structures which can be utilized to retrieve the specifics of features from extensions. It is implemented in the form of `vk::StructureChain` with `vk::PhysicalDeviceFeatures2` that can be extended with any extension feature structures.
This implements everything in Maxwell3D vertex buffer bindings including vertex attribute divisors which require the extension `VK_EXT_vertex_attribute_divisor` to emulate them correctly, this has been implemented in the form of of a quirk. It is dynamically enabled/disabled based on if the host GPU supports it and a warning is provided when it is used by the guest but the host GPU doesn't support it.
The Maxwell3D `Address` class follows the big-endian register ordering for addresses while on the host we consume them in little-endian, the `IOVA` class is the host equivalent to the `Address` class with implicitly flipped 32-bit register ordering. It shares implicit decomposition semantics from `Address` due to similar requirements with a minor difference of being returned by reference rather than value as we want to have value setting semantics with implicit decomposition while we don't for `Address`.
The semantics of implicitly decomposing the `Address` class into a `u64` were determined to be appropriate for the class. As it is an integer type this effectively retains all semantics from using an integer directly for the most part.
Maxwell3D supports both independent and common color write masks like color blending but for common color write masks rather than having register state specifically for it, the state from RT 0 is extended to all RTs. It should be noted that color write masks are included in blending state for Vulkan while being entirely independent from each other for Maxwell, it forces us to use the `independentBlend` feature even when we are doing common blending unless the color write mask is common as well but to simplify all this logic the feature was made required as it supported by effectively all targeted devices.
Maxwell3D supports independent blending which has different blending per-RT and common blending which has the same blending for all RTs. There is a register determining which mode to utilize and we simply have two arrays of `VkPipelineColorBlendAttachmentState` for the RTs that we toggle between to make the transition between them extremely cheap.
Independent blending is supported by effectively every Vulkan 1.1 Android GPU, it gives us the ability to architecture Maxwell3D blending emulation better as we can avoid additional checks for independent blending state and having a fallback path for when the host doesn't support the feature.
A prior commit added the ability to utilize features with quirks but this implements the ability to require a feature be present on the host or an exception will be thrown. It allows us to make useful assumptions that result in a better architecture in certain cases.
Implements the infrastructure required to enable optional extensions set in `QuirkManager` alongside the required extensions in the `GPU` class. All extensions should be correctly resolved now and according to what the device supports.
The offset was incorrectly set to `0x4D` rather than `0x4ED` which is what it should be. This would've led to bugs in line width determination and likely broken any aliased line rendering entirely.
We selectively enable GPU features that we require as enabling all of them might result in extra driver overhead in certain circumstances. Setting them is handled by `QuirkManager` with the new `FEAT_SET` function that ties a quirk with a feature.
We stub alpha testing as it doesn't exist in Vulkan and few titles use it, it can be emulated in the future using a shader patch with manually discarding fragments failing the alpha test function but this'll be added in later as it isn't high priority at the moment and has associated overhead with it so other options might be explored at the time.
It is essential to know what quirks a certain GPU may have to debug an issue, these are now printed at startup into the log alongside all other GPU information. A new `QuirkManager::Summary` function was implemented to provide this functionality.
Implements a basic part of Vulkan blending state which are color logic operations applied on the framebuffer after running the fragment shader. It is an optional feature in Vulkan and not supported on any mobile GPU vendor aside from ImgTec/NVIDIA by default.
Any signals that lead to exception handling being triggered now attempt to flush all logs given that the log mutex is unoccupied, this is to mostly help logs be more complete when exiting isn't graceful.
A lot of calls in Maxwell3D register initialization ended up setting the register to 0 which should be implicit behavior and most calls would be eliminated by the redundancy check which had to be manually disabled. It was determined to be better to move this responsibility to the called function to initialize to state equivalent to the corresponding register being 0. All initialization calls with the argument as 0 have been removed now due to this, it was the vast majority of calls.
Maxwell3D Registers weren't initialized to the correct values prior, this commit fixes that by doing `HandleMethod` calls with all the register values being initialized. This is in contrast to the registers being set without calling the methods in `GraphicsContext` or otherwise resulting in bugs.
The function `GetFormat` was seemingly no longer required due to us never converting from a Vulkan format to a Skyline format, most conversions only went from Skyline to Vulkan and were generally lossy due to certain formats being missing in Vulkan and approximated using channel swizzles. As a result of this, it was pointless to maintain and has now been removed.
Maxwell3D registers relevant to the Vulkan Rasterizer state have been implemented aside from certain features such as per-face polygon modes that cannot be implemented due to Vulkan limitations. A quirk was utilized to dynamically support the provoking vertex being the last vertex as opposed to the first as well.
We require a way to track certain host GPU features that are optional such as Vulkan extensions, this is what the `QuirkManager` class does as it checks for all quirks and holds them allowing other components to branch based off these quirks.
Due to compiler alignment issues, the bitfield member `increment` of `MacroInterpreter::MethodAddress` was mistakenly padded and moved to the next byte. This has now been fixed by making its type `u16` like the member prior to it to prevent natural alignment from kicking in.
This commit added basic shader program registers, they simply track the address a shader is pointed to at the moment. No parsing of the shader program is done within them.
A thread local LoggerContext is now used to hold the output file stream instead of the `Logger` class. Before doing any logging operations, a LoggerContext must be initialized.
This commit will not build successfully on purpose.
Dividers after titles were missing in `ControllerActivity` which made it look inconsistent with `SettingsActivity` which did have them. They have now been added by extending `DividerItemDecoration` to be drawn before any `ControllerHeaderItem`.
The icons in these FABs had the same color as the FAB prior which led them to being invisible. This has been fixed by setting a white tint on them which makes the icons clearly visible.
Additional padding has been added to the text alongside making it be left-aligned rather than center-aligned and justified. A newline has also been added to the copyright notice for Skyline to make it look nicer.
We wanted the color of the modals used by the dialogs to be the same as our regular background color rather than a lighter grey. This has now been enforced with style attributes in the case of `AlertDialog` and `setBackground` in the case of `BottomSheetDialog`.
We inconsistently used `AppCompat`'s `AlertDialog` theme in Settings while using `MaterialComponents`'s theme in Controller Configuration. This has now been fixed by universally using the `MaterialComponents` theme.
The Skyline logo was added to the title area but it ended up being too distracting with a light theme as the logo was designed purely for a white background. Ultimately, even though it looked good with the dark theme we had to remove it.
Aligning the buttons to the bottom of the game image was determined to look odd due to the amount of padding between the title and buttons. They are now back to being below the title but the buttons have been resized with "Play" being a wide button while "Pin" has been replaced with Google Material Icons's "Add To Home Screen" icon and sized down to an icon-only button.
- Logo is now displayed next to the app name
- Remove search bar animation
- New color accent
- Improve visibility of controller binding setting's glyphs
This pushes a set of command buffers into the Host1x command FIFO allocated for the channel, returning fence thresholds that can be waited on for completion,
The Host1x block of the TX1 supports 14 separate channels to which commands can be issued, these all run asynchronously so are emulated the same way as GPU channels with one FIFO emulation thread each. The command FIFO itself is very similar to the GPFIFO found in the GPU however there are some differences, mainly the introduction of classes (similar to engines) and the Mask opcode (which allows writing to a specific set of offsets much more efficiently).
There is an internal Host1x class which functions similar to the GPFIFO class in the GPU, handling general operations such as syncpoint waits, this is accessed via the simple method interface. Other channels such as NVDEC and VIC are behind the 'Tegra Host Interface' (THI) in HW, this abstracts out the classes internal details and provides a uniform method interface ontop of the Host1x method one. We emulate the THI as a templated wrapper for the underlying class.
Syncpoint increments in Host1x are different to GPU, the THI allows submitting increment requests that will be queued up and only be applied after a specific condition in the associated engine is met; however the option to for immediate increments is also available.
This avoids the excessive repetition needed for the case where array
members have no default constructor.
eg:
```c++
std::array<Type, 10> channels{util::MakeFilledArray<Type, 10>(typeConstructorArg, <...>)};
```
nvmap allows mapping handles into the SMMU address space through 'pins'. These are refcounted mappings that are lazily freed when required due to AS space running out. Nvidia implements this by using several MRU lists of handles in order to choose which ones to free and which ones to keep, however as we are unlikely to even run into the case of not having enough address space a naive queue approach works fine. This pin infrastructure is used by nvdrv's host1x channel implementation in order to handle mapping of both command and data buffers for submit.
host1x channels are generally similar to GPU channels however there is only one channel for each specific class (like a GPU engine) and an address space is shared between them all.
This PR implements the simple IOCTLs with the larger ones that will depend on changes outside of nvdrv being left for future commits. This is enough to partly run oss-nvjpeg.
The element containing the size first needs to be saved to a save slot with Save<T, slotId>, it can then be read back later as the size of a span with SlotSizeSpan<T, slotId>. This is needed to support the Host1XChannel Submit IOCTL.
Maxwell3D registers were primarily written with absolute offsets and ended up being fairly messy due to attempting to emulate this using struct relative positioning resulting in a lot of pointless padding members. This has now been improved by utilizing `OffsetMember` to directly use offsets resulting in much neater code.
It was found to be semantically advantageous to directly pass-through certain operators such as the assignment (`=`) and array index (`[]`) operators. These would require a dereference prior to their usage otherwise but now can be directly used.
The offset of a member in a structure was determined by its relative position and compiler alignment. This is unoptimal for larger structures such as those found in GPU Engines that are primarily named by offset rather than relative positioning and end up requiring a massive amount of padding to function as is. A solution to this problem was simply to supply member offsets directly which can be done by using `OffsetMember` alongside a `union`.
We used to manually call JNI UTF-8 string allocation and deallocation functions when utilizing a `jstring` but this could be erroneous and is just inconvenient. All of this has now been consolidated into an class `JniString` which is a wrapper around `std::string` and creates a copy of the contents of the `jstring` in its constructor and passes them into the `std::string` constructor.
The Vulkan Pipeline Barriers were unoptimal and incorrect to some degree prior as we purely synchronized images and not staging buffers. This has now been fixed and improved in general with more relevant synchronization.
`EmulationActivity.vibrateDevice` would assert when a `null` Vibrator is provided due to one not being set in the controller configuration. This has now been fixed by the code not playing a vibration when a vibration device isn't selected.
The guest -> host vibration conversion code was entirely broken as it didn't set the vibration `start`/`end` timestamps correctly for a cycle nor did it subtract from the `totalAmplitude` (`currentAmplitude` now) when it a cycle ended due to an incorrect `if` statement and contents. It would just end up saturating the amplitude as much as possible by adding more and more to `totalAmplitude` on every cycle while never subtracting which is entirely wrong and led to a very noticeable drop in amplitude when a vibration was repeated.
It's been entirely reworked to fix all the issues listed above and remove a lot of code that had no understandable purpose. More comments have also been added to the code to make it more readable with better variable and function naming alongside it.
The version of libcxx shipped with Android NDK is fairly outdated and doesn't contain several features we desire such as C++ 20 ranges. This has been fixed by using libcxx directly from the LLVM Project which has been added as a submodule and can be updated independently of NDK.
We've moved to using a beta AGP as `7.0.2` is breaks `clangd` and other C++ features on Beta/Canary Android Studio. NDK was additionally updated with `mbedtls` to fix warnings caused by it alongside some other minor fixes to code for newer versions of libcxx.
The new AGP has a bug where it does not look for executables specified in `android_gradle_build.json` in `PATH` that includes `ninja` which is provided by the `ninja-build` package on the system rather than Android SDK's CMake on GitHub Actions (Ubuntu 20.04). This has been fixed by symlinking `/usr/bin/ninja` to the project root which is searched in for the `ninja` executable.
Locking `KProcess::threadMutex` when a process is being killed by another thread with `join` can lead to the non-joining killer effectively joining as it's waiting on the joining killer to relinquish the mutex. This has been fixed by having an atomic boolean tracking if the process has already been killed and if it has, immediately returning prior to locking the mutex for any non-joining killers.
Resampling would sometimes perform an OOB read into `inputBuffer` due it not containing enough data to calculate corresponding the output sample, this has been fixed by introducing bounds checking to ensure that the buffer has enough data.
The method used to finish (`finishAndRemoveTask`) an activity prior to going back to `MainActivity` or restarting the process led to the process prematurely exiting entirely and would result in it not being restarted or another activity not being launched. This has now been fixed by utilizing `finishAffinity` in its place which correctly only ends the activities with the same affinity as the caller.
Members of `GuestTexture` were apparently not being initialized and this led to UB since they would be read as random values. Titles such as Super Mario Odyssey avoided setting `baseArrayLayer` which led to it being left at the default value which was completely random and this would lead to crashes. This commit fixes this by initializing said values correctly.
Some titles don't clear the output buffer prior to submission, as the service is expected to fill all of it in, our audren implementation is incomplete and doesn't end up doing this leaving the contents of the buffer to be undefined leading to UB in the form of SEGFAULTs or the application throwing a fatal error. This has been patched over by 0-filling the buffer which is a sane default value for the fields that aren't filled in albeit not a replacement for a proper audren implementation.
Certain titles can submit logs where the last field is one off by the buffer end, the logger loop now considers this and terminates if there isn't enough data left to read the field type and length.
Access to the `vibrations` field in `vibrations[3].period` could lead to UB, this has been replaced with a proper check which adds up the period over all vibrations instead. A minor cleanup with variable names and explicit types for integer arithmetic has also been done.
If a non-builtin vibrator was attempted to be fetched, it'd insert it in the vibrator cache and return directly as opposed to playing the vibration on it prior to returning. This has now been fixed, the value is both put into the cache and the vibration is played on it.
The decomposition from `texture::Dimension` to `vk::Rect2D` was somehow implicit and completely incorrect resulting in wrong conversion with undefined values. It's now been fixed by explicitly setting `vk::Rect2D::extent` to `scissor` specifically.
The second parameter of `std::string_view::substr` was assumed to be an end position (similar to `std::span`) rather than `count` which it is. As a result of this, it was entirely broken but only held together by a constant factor being subtracted from it which was derived by trial and error. It's now been fixed by returning a count rather than the absolute position.
Fix a bug where attempting to launch Skyline from the launcher while emulation was in progress would result in `MainActivity` launching rather than `EmulationActivity`. We always want `EmulationActivity` to stay on top of the stack and be launched whenever Skyline is resumed, no other activity should be able to run in parallel to `EmulationActivity` in any user-accessible manner.
Guest-driven exiting could cause objects left on the heap due to a `std::longjmp` from high up in the host call stack, this has been fixed by introducing `ExitException` which implicitly unrolls the stack with the exception handling mechanism.
* Resolves dependency cycles in some components
* Allows for easier navigation of certain components like `span` which were especially large
* Some imports have been moved from `common.h` into their own files due to their infrequency
* Update licenses for dependent projects
* Add copyright notices (as provided)
* Revamp styling for `LicenseDialog`
* Fix invisible `PreferenceDialog` buttons in Settings
* Consolidating color variables into `colorPrimary`, `backgroundColor` and `backgroundColorVariant`
* Use `com.google.android.flexbox:flexbox:3.0.0` (Google Maven) rather than `com.google.android:flexbox:2.0.1` (Bintray)
* Clean Exiting was improved by implementing a robust system for when to abandon clean exiting and simply restart the process alongside moving clean exiting to the background when the application is quit by using the back button
* Audio is now automatically paused whenever the application is moved to the background and automatically resumed when it's brought to the foreground
* The system language setting had several errors and inconsistencies which have now been fixed, it's been brought more in line with HOS language (Albeit not entirely due to no region setting in Skyline)
* Fix a bug with `ThreadLocal` where the atomic `list` pointer was uninitialized resulting in a `SEGFAULT` during the destructor
* Fix handling `SA_EXPOSE_TAGBITS` bit being set in Android 12 `sigaction`
* Fix CMake bug using `CMAKE_INTERPROCEDURAL_OPTIMIZATION_RELEASE` when not supported causing `-fuse-ld=gold` to be emitted as a linker flag
* Support using `VIBRATOR_MANAGER_SERVICE` rather than `VIBRATOR_SERVICE` on Android 12
* Optimize Imports for Kotlin code
* Move away from deprecated APIs in Kotlin or explicitly mark where it's not possible
* Update SDK, NDK and libraries
* Enable Gradle Configuration Cache
These are used heavily in OpenGL games, which now, together with the
previous syncpoint changes, work perfectly. The actual implementation is
rather novel as rather than using a per-class state machine for all
methods we only use it for those that are known to be split across
GpEntry boundaries, as a result only a single bounds check is added to
the hot path of contiguous method execution and the performance loss is
negligible.
* Fix `AddClearColorSubpass` bug where it would not generate a `VkCmdNextSubpass` when an attachment clear was utilized
* Fix `AddSubpass` bug where the Depth Stencil texture would not be synced
* Respect `VkCommandPool` external synchronization requirements by making it thread-local with a custom RAII wrapper
* Fix linear RT width calculation as it's provided in terms of bytes rather than format units
* Fix `AllocateStagingBuffer` bug where it would not supply `eTransferDst` as a usage flag
* Fix `AllocateMappedImage` where `VkMemoryPropertyFlags` were not respected resulting in non-`eHostVisible` memory being utilized
* Change feature requirement in `AndroidManifest.xml` to Vulkan 1.1 from OGL 3.1 as this was incorrect
Allows the execution of multiple channels at the same time, with locking
being performed on the host GPU scheduler layer, address spaces can be
bound to one or more channels.
Infrastructure for always syncing textures has been introduced now, they will be synced prior to and after every execution. This does considerably reduce the performance alongside waiting on GPU execution to finish but it will be partially recouped once conditional syncing is performed.
* Move Shared Font TTFs to AAsset storage + Support external shared font loading from `/data/data/skyline.emu/data/fonts`
* Fix bug in `IApplicationFunctions::PopLaunchParameter` caused by ignoring `LaunchParameterKind`
* Fix bug with Choreographer causing it to be awoken and exit prior to the destruction of `PresentationEngine`
* Fix bug with `IDirectory::Read` where it used `inputBuf` for the output buffer rather than `outputBuf`
* Improve `GetFunctionStackTrace` logs when `dli_sname` or `dli_fname` are missing
* Support more RT Formats
Support for subpasses was added by reworking attachment reuse code to account for preserved attachments and subpass dependencies. A lot of RT formats were also added to allow SMO to boot up entirely, it should be noted that it doesn't render anything.
`FenceCycle` had a cyclic dependency which broke clean exit, we now utilize `std::weak_ptr<FenceCycle>` inside the `Texture` object. A minor fix for broken stack traces was also made caused by supplying a `nullptr` C-string to libfmt when a symbol was unresolved which caused an `abort` due to invocation of `strlen` with it.
This commit introduces the `CommandExecutor` which is responsible for creating and orchestrating a Vulkan command graph comprising of `CommandNode`s that construct all the objects required for rendering. As a result of the infrastructure provided by `CommandExecutor`, `ClearBuffers` could be implemented and be appropriately utilized.
A bug regarding scissors was also determined and fixed in the PR, the extent of them were previously inaccurate and this has now been fixed.
Note: We don't synchronize any textures from the guest for now as this would override the contents on the host, this'll be fixed with the appropriate write tracking but it also results in a black screen for anything that writes to FB
This commit fixes a major issue with command buffer allocation which would result in only being able to utilize a command buffer slot on the 2nd attempt to use it after it's freed, this would lead to a significantly larger amount of command buffers being created than necessary. It also fixes an issue with the command buffers not being reset after they were utilized which results in UB eventually.
Another issue was fixed with `FenceCycle` where all dependencies are only destroyed on destruction of the `FenceCycle` itself rather than the function where the `VkFence` was found to be signalled.
This commit implements a filter by type for any validation layer output, this allows filtering out any logs which may be unnecessary and additionally triggering a breakpoint as required.
An issue concerning the `NDEBUG` flag never being set was fixed, it's now supplied as a release compiler flag. The issue can manifest itself by always relying on a validation layer even though it shouldn't on release, this is why the validation layer was mistakenly disabled entirely previously by using `#ifndef` rather than `#ifdef`.
An issue with the initial layout of a texture being supplied as neither `VK_IMAGE_LAYOUT_UNDEFINED` or `VK_IMAGE_LAYOUT_PREINITIALIZED` was fixed, these cases are now handled by transitioning to those layouts after creating the image rather than supplying it within `initialLayout`.
Another issue was fixed regarding not maintaining a transformation after a surface has been destroyed and recreated existed and manifested itself when the user would go out of the app and come back in, they would see the surface having an identity transformation rather than the desired one.
Fixes bugs with the Texture Manager lookup, fixes `RenderTarget` address extraction (`low`/`high` were flipped prior), refactors `Maxwell3D::CallMethod` to utilize a case for the register being modified + preventing redundant method calls when no new value is being written to the register, and fixes the behavior of shadow RAM which was broken previously and would lead to incorrect arguments being utilized for methods.
Implement the groundwork for the texture manager to be able to report basic overlaps and be extended to support more in the future. The Maxwell3D registers `RenderTargetControl`, `RenderTarget` and a stub for `ClearBuffers` were implemented.
A lot of changes were also made to `GuestTexture`/`Texture` for supporting mipmapping and multiple array layers alongside significant architectural changes to `GuestTexture` effectively disconnecting it from `Texture` with it no longer being a parent rather an object that can be used to create a `Texture` object.
Note: Support for fragmented CPU mappings hasn't been added for texture synchronization yet
Utilize Boost Container's `small_vector` for optimizing allocations, fix certain implicit casting issues and make `ILogger` not output an additional newline in the log when the application supplies one at the end of the log
The format provided in `GraphicBuffer` can be misleading and is supplied as `None` by the Deko3D Swapchain, it instead supplies the real format in the `NvGraphicHandle` which we now utilize instead of the one in `GraphicBuffer`.
KTransferMemory needs to be reset to RW on destruction unlike KSharedMemory which is simply freed on destruction, not emulating this behavior accurately leads to `deko_examples` from `switch-examples` to lead to a SEGFAULT on selecting an example as it expects the memory to be R/W while it ends up being freed instead
The unique pointer to a device in the map was simply reset rather than deleting the entry from the map, this resulted in the device not being properly closed and when the device was reopened then the `emplace` was a NOP as the entry already existed. This resulted in a `nullptr` dereference down the line when an application attempted to issue an IOCTL to a device that was previously closed and reopened. This is known to occur in Deko3D as it recreates the context when loading an example which includes closing and reopening devices.
A hotfix for a nvdrv bug where an IOCTL with no input/output buffers would crash and a major `nvmap` bug which broke the `FromId` IOCTL as it didn't write back the handle ID, another minor bug existed in `nvhost` where the `ZCullGetInfo` IOCTL was `INOUT` rather than `OUT`.
A bug with NACPs was also fixed caused by incorrect padding for the `NacpData` structure which resulted in the `saveDataOwnerId` member being read incorrectly and as a result the save data folder being incorrect.
Co-authored-by: artem8086 <artemsvyatoha@gmail.com>
Swapped out the usages of frozen constexpr unordered maps for switch statements, which are very likely to be turned into jump tables given the nature of the enums used, resulting in better performance than a map
Unlike `ListPreference`, this preference class uses integers as its values instead of strings, avoiding unnecessary casting. It also doesn't require an array for values: in that case it will be using the clicked entry position as its value.
Using a u32 for the loop index prevents masking on all increments,
giving a moderate performance increase.
Passing methods as u32 parameters and stopping subChannel being passed
gives quite a significant increase when combined with the inlining
allowed by subchannel based engine selection.
The implementation of GPU channels and Host1X channels will be split up
as it allows a much cleaner implementation and less undefined behaviour
potential.
This will be required later for NVDEC/SMMU support and fixes many
significant issues in the previous implementation.
Based off of my 2.0.0/12.0.0 nvdrv REs.
The syncpoint manager has beeen given convinience functions for fences
which remove the need to access the raw id/threshold most of the time
and various accuracy fixes and cleanups to match HOS 12.0.0 have also
been done.
Implements the 'csrng:' service using C++ <random>'s Mersenne Twister, this does make it insecure for cryptographic purposes but it is pointless to attempt to do this regardless as we cannot ensure that the guest will run in a secure environment which cannot be mutated by an attacker. Used by Prison Princess, Pokemon Cafe Mix, Paint your Pet and more.
Encountered in 不如帰大乱 when `HOS-3` is awoken at the same time as `HOS-0` called `SvcSetThreadCoreMask` resulting in a deadlock where `HOS-0` owns `HOS-3`'s `coreMigrationMutex` while `HOS-3` owns the core mutex with the both of them attempting to lock the other mutex
We've moved from using an AAR for Mbed TLS to a submodule as the AAR was packaged manually and used from a local repository which ended up being very hacky and resulted in Linter errors, it could also not be updated with ease as it would need to be repackaged. All of these issues have been solved by moving to a git submodule tied to the official Mbed TLS GitHub repository.
Sticky transforms have been stubbed, as they are on HOS/Android. Certain titles like Xenoblade Chronicles end up setting the sticky transform even if it doesn't do anything, as a result of this we cannot throw an exception for it and stub it without an exception (Aside from the cases where the value isn't recognized).
The following GraphicBufferProducer transactions were implemented:
* `SetBufferCount`
* `DetachBuffer`
* `DetachNextBuffer`
* `AttachBuffer`
It should be noted that `preallocatedBufferCount` (previously `hasBufferCount`) and `activeSlotCount` were adapted accordingly with how they were effectively the same value as all active buffers were preallocated prior but now there can be a non-preallocated active slot.
Additionally, a bug has been fixed where `SetPreallocatedBuffer` has the graphic buffer as an optional argument whereas it was treated as a mandatory argument prior and could lead to a SEGFAULT if an application were to not pass in a buffer.
VI/IHOSBinder suffered from major inaccuracies in their function due to being quickly thrown together initially with little concern for accuracy, this has now been fixed with them being substantially more accurate now.
`ENUM_STRING` now has a unified implementation in <common/macros.h> with a documented format and can be used throughout the codebase.
A major performance regression was added in the Host1X Syncpoint revamp as it did a syscall if there were any waiters during `Increment` even if they would just be woken up and go back to sleep as the threshold wasn't hit. It has now been optimized to only do a wake if any waiting thread needs to be awoken.
There was also a bug concerning increment where it would perform actions corresponding to the previous increment rather than the current one which has also been fixed.
We used instantaneous values for FPS previously which led to a lot of variation in it and the inability to determine a proper FPS value due to constant fluctuations. All FPS values are now averaged to allow reading out a stable value and a deviation statistic has been added for the frame-time to judge judder and frame-pacing which allows for a significantly better measure of overall performance. The formatting for all the floating-point numbers is now fixed-point to prevent shifting of position due to decimal digits becoming 0.
Support for the following parameters was added to `QueueBuffer`:
* Earliest Present Timestamp
* Swap Interval
* Crop
* Scaling Mode
* Transform
* Frame ID (Not returned to guest yet)
We utilize ANativeWindow APIs directly to achieve all of this in an efficient manner since HWC will be used directly for it, we do plan to introduce Vulkan equivalents for all of these operations later down the line for a port to non-Android platforms.
We had issues when combining host and guest presentation since certain configurations in guest presentation such as double buffering were very unoptimal for the host and would significantly affect the FPS. As a result of this, we've now made host presentation have its own presentation textures which are copied into from the guest at presentation time, allowing us to change parameters of the host presentation independently of the guest.
We've implemented the infrastructure for this which includes being able to create images from host GPU memory using VMA, an optimized linear texture sync and a method to do on-GPU texture-to-texture copies.
We've also moved to driving the V-Sync event using AChoreographer on its on thread in this PR, which more accurately encapsulates HOS behavior and allows games such as ARMS to boot as they depend on the V-Sync event being signalled even when the game isn't presenting.
This commit reworks the `Texture` class to include a Vulkan Image backing that can be optionally owning or non-owning and swapped in with consideration for Vulkan image layout, it also adds CPU-sided synchronization for the texture objects with FenceCycle. It also makes the appropriate changes to `PresentationEngine` and `GraphicBufferProducer` to work with the new `Texture` class while setting the groundwork for supporting swapchain recreation. It also fixes a log in `IpcResponse` and improves the display mode selection algorithm by further weighing refresh rate.
Implements a wrapper over fences to track a single cycle of activation, implement a Vulkan memory manager that wraps the Vulkan-Memory-Allocator library and a command scheduler for scheduling Vulkan command buffers
This commit makes GraphicBufferProducer significantly more accurate by matching the behavior of AOSP alongside mirroring the tweaks made by Nintendo.
It eliminates a lot of the magic structures and enumerations used prior and replaces them with the correct values from AOSP or HOS.
There was a lot of functional inaccuracy as well which was fixed, we emulate the exact subset of HOS behavior that we need to. A lot of the intermediate layers such as GraphicBufferConsumer or Gralloc/Sync are not emulated as they're pointless abstractions here.
This commit adds in VkSurface/VkSwapchain initialization and recreation. It also adapts GraphicsBuffferProducer and Texture to fit in with those changes but it doesn't yet implement presenting those buffers nor uploading guest buffers onto the host.
Vulkan Device initialization is handled now, it supports required extensions but support for optional extensions/features/properties will come in later when we require those. In addition, we now correctly report the version of Skyline to Vulkan which can be accessed from debugging tools.
There's also a minor change regarding the search pattern for `SkylineLibraries` which now only searches in headers of libraries and it also explicitly excludes the redundant `vulkan.hpp` from the `Vulkan-Headers` repository.
The GPU class has been extended in this for Vulkan initialization, this is done to the point of initializing the instance alongside loading in `VK_LAYER_KHRONOS_validation` which is also now packed into all Debug APKs for Skyline. In addition, `VK_EXT_debug_report` is also initialized and it's output is piped directly into the Logger.
A minor change regarding the type of the `Fps` and `Frametime` globals was changed to `skyline::i32`s which is a more suitable type due to those having a smaller chance of overflowing while being signed as Java doesn't have unsigned integral types.
As both of these are in the same memory segment they have no individual
alignment requirements, this created a bug in
にゃんらぶ～私の恋の見つけ方～ where the data segment would be larger
than the game expected and invalid command line arguments would be read.
armed.
It was discovered during testing of 'Hatsune Miku Project DIVA: Mega Mix'
that if a thread was starting while preemption was being enabled a NULL
pointer dereference could occur in the timer_settime call as
timer_create may not have been called yet.
This is used by games before calling into nvdec in order to clock up the
HW module, it can also be used to request a RAM frequency. Since we
obviously don't emulate the hardware down to this level a basic stub
that provides the correct reponses is enough.
Fixes a crash on first level of Super Mario Odyssey.
We used a custom version of Vulkan-Hpp which split the files a lot prior to avoid any developers needing to manually set IDE settings for IntelliJ to work but this wasn't practical due to how it required modifications to Vulkan-Hpp's generator which would make maintenance extremely difficult. It was determined that we should just add the requirement for changing the IDE settings and use Vulkan-Hpp directly.
